When i plug the tablet in to the charger producer logo i blinking.
When press power+volume-up launches recovery CWM 5.5.0.4 .
When i press power+volume-down it stuck on producer logo for a while and screen turns off
And when i go into recovery cant mount anything if want to format a partition recovery stops working (lag).
I cant remove battery is internal.
Windows doesnt recognize it.
Can you help me whith that?
I searched on internet an could find anything...
Do you have the adapter that connects a usb flash to the port on your tablet? Try putting a ROM on there and flashing it
USB cable?
No it's the opposite, one end connects to the tab and the other is a USB in slot so you can plug in a flash drive or external hard drive to it.
Related
I messed up my phoen flashing a rom and now when I am trying reset with odin it hangs up on file analysisI tried looking for a solution online nothing worked...
Changed usb ports
was wondering if someone knew how I could go about fixing this thanks...
Can you still get into download mode?
I would think he should be OK to get into DL mode. Sometimes ODIN likes to be difficult like that. Just unplug the phone, reset, and put it back into DL mode again. Any of those things could be the source, but doing them all shouldn't hurt, and I wouldn't expect the same issue to happen again. If it does, check your pit and tar files.
As long as you can get into download mode or recovery, you're fine. Just try different combinations as prince stated.
Verify the md5, or download again
Remove other usb items (my webcam hates odin)
Reboot pc
other usb
Using cable that came with phone? (my n1 cable didn't work)
i haven't been able to try that now when i connect my phone there is an image of a phone a computer and a triangular sign with and exclamation point cant get into download mode....? any clues why?
ace8187 said:
i haven't been able to try that now when i connect my phone there is an image of a phone a computer and a triangular sign with and exclamation point cant get into download mode....? any clues why?
Click to expand...
Click to collapse
Pull the battery, put it back in, Hold down volume up and down and plug in usb and that will get you back into D/l mode. Did it ten times today. That will happen when you pull the usb cord off the phone while in D/L mode. Always pull the usb out of the pc instead.
ace8187 said:
i haven't been able to try that now when i connect my phone there is an image of a phone a computer and a triangular sign with and exclamation point cant get into download mode....? any clues why?
Click to expand...
Click to collapse
Unplug the usb from the phone and computer
Unplug every usb from the computer
Take out your battery
Restart your computer
Open Heimdall software once computer is booted
Plug the usb into the computer
Hold the vol up and down on your phone, while holding them, connect the usb to the phone, then insert the battery. Hold the two buttons until it's in download mode.
Edit...try bada method first. Both work.
problem solved
Thanks a lot i removed all the usb drives rebooted and ran odin it went trhough and froze up at another part but then i put the usb cable on the back of the pc and it was fixed thanks a lot guys i loaded it back to stock.
My phone started out bad and everything I did to fix it made it worse. Initially, the camera, phone, and other core apps went missing after installing a JB rom. I flashed another stock rom over it to try and replace the missing apps, but that didn't work- so I deleted the system folder and tried to install again. After that, the phone wouldn't even boot. It shows the kernel screen, I can boot to CWM, but I can't use USB storage. I've tried wiping everything to no avail. What makes it bricked is that I can't connect the phone to any computer. I install the drivers, but I plug the phone in and nothing happens. Flashtool doesn't recognize it nor does fastboot. When I hold up + plug it in, it turns blue for 1 second (but isn't recognized) then turns red and boots. The same thing happens when I hold vol down + plug it in, only it turns green for 1 second. I'm just about out of ideas, now that both my home and work computers don't recognize the phone and allow it to enter flashmode/fastboot mode. Because USB mass storage doesn't work from CWM and I have no way of changing the kernel, I think I'm just screwed. Any ideas?
Did you try to install Device drivers again? Maybe uninstalling flashtool or installing the new version could help you. Just and idea mate, don't know if this method could work.
Hi guys.
Right now I'm having some issues with my Tablet. It seems to be bricked. I was trying to flashing it and something failed, but now my PC cannot recognize it and when I tried to turn it on or go to recovery mode, it always stays in the Android Logo (Image attached)
What can I do. I was trying to use uberizer or adb but as the tablet is not recognized by my PC, I just don't know what to do.
Thanks for the help you can give me.
abottoni said:
Hi guys.
Right now I'm having some issues with my Tablet. It seems to be bricked. I was trying to flashing it and something failed, but now my PC cannot recognize it and when I tried to turn it on or go to recovery mode, it always stays in the Android Logo (Image attached)
What can I do. I was trying to use uberizer or adb but as the tablet is not recognized by my PC, I just don't know what to do.
Thanks for the help you can give me.
Click to expand...
Click to collapse
What brand is that tablet? Specs on it? Looks identical to mine. I got mine to flash by using livesuit and the faaastjb v2.5. Start livesuit, select your rom image that you choose. Make sure tablet is unplugged from usb, but plugged into charger, and it is off. Hold the volume up button, then plug the usb in (computer and tablet). Press the power button repeatedly until you hear the windows sound when you plug in a usb device. Once you hear this, stop pressing power, and let go of the volume up button. You should hear the sound in windows like its disconnected, then reconnected and then livesuit will ask if you want a complete flash (erase and flash) or upgrade. Then just let it go.
Hopefully this helps you, and if you do have the same tablet as me, I would be very grateful if you would send me a factory dump so I can get proper drivers!
So i bought phone yersterday, and today i connected phone via usb to pc and i.. formated something, some pop-ups with formating g: i formated it accidently, but i was fast enought to see that i formatted something that was only 20Kb.. and when i did it.. i cant turn the phone. nothing working, tryed remove battery, holding power on button without battery. No sign of life, screen black... it just dont work , just like it were without battery. But when i connect usb my pc shows Udentified device and tryes download drivers for it and then fails.. Charging not work too. Cant enter Cwm too. Phone even don't vibrate when holding power button..
Maybe someone knows what the heck just happened??
please...
Hello everyone!
I got a clone T95X box, on the info it says it's a Nexbox A95X 1GB/8GB. I installed TWRP then booted into it, started testing and erased all partitions (yeah dumb) on the advanced wipe screen.
I had made a backup of all the partitions to an external drive (I still have it) before I did this so I thought "ok no big deal" and went to grab a drink before I restored it. When I came back someone or one of the dogs had pulled or kicked the power cord and it was turned off!
Now when I power it on all I get is a red light, no image no nothing.
What I tried so far:
1- Magic SDcard method with cyx_NEXBOX-A95X_S905X_8189etv_8g1g_kodi_addons_161104_SD_USB firmware -> nothing
2- USB Burning Tool 2.0.8 -> device doesn't show up, no matter what I do or how I connect it to the USB male to male cable. Tried monitoring the device manager on windows 10 x64 but when I plug the cable on absolutely nothing happens.
3- http://freaktab.com/forum/tv-player-...962#post306962 tried this method using the uboot.bin image from the cyx firmware above. Nothing happens.
I have no clue of which pins to short on the nand (it's a Eudar EMS1ASCBT1FC008 module) so if anyone knows the pins for this one, PLEASE share!
I've run out of things to try, can you guys help me out reviving this box?
Thanks a LOT for the help!!!
With the USB burning tool did you try to press "Start" before connecting your box on your PC?
Do you have a reset button inside the a/v port?
Yep, tried the "press start before then connect the box" method.
It does have the reset button, I tried doing the above both with reset pressed and not pressed, in both USB ports... still nothing...
Have you found a solution? Same situation
Sent from my Nexus 6 using Tapatalk