Related
Today i try to root a Mediapad 10 ,, i use the files than are sticky in the this section on mediapad ... now to do the D.O.S exe called Root : The MediaPad stuck in the logo dont enter in recovery via buttons, Don't enter to the android robot recover zip update,,,, And no nothing with the set.
I use the file : Auto_recovery_installer_for_huawei_mediapad ,,, but don't recognize the device,,, Please someone can gimme a little bit of help?
Best Regards !!
Amartt said:
Today i try to root a Mediapad 10 ,, i use the files than are sticky in the this section on mediapad ... now to do the D.O.S exe called Root : The MediaPad stuck in the logo dont enter in recovery via buttons, Don't enter to the android robot recover zip update,,,, And no nothing with the set.
I use the file : Auto_recovery_installer_for_huawei_mediapad ,,, but don't recognize the device,,, Please someone can gimme a little bit of help?
Best Regards !!
Click to expand...
Click to collapse
Reading and reading for long hours ,it seen than the only files that could bring back to the normality to my tablet are the next file:
Huawei_S10-201u_V100R001C233B001_Root_Repair_Downgrade.7z
But the link than store this files are from Russia is called 4PDA and this files are corrupts .Cause when try to unzip always show a error when a try to unzip . :crying:
Please need badly the files ... somebody have this files ???
Problem fixed.. i used this files and then make a upgrade . Auto_recovery_installer_for_huawei_mediapad.zip .:highfive:
help needed
I also need help regarding mediapad link 10. Mic volumes in my link is so low person on tne other side can hardly hear me, usally i use skype.
It is runing 4.1.2 is this normal or should i go for warranty claim can rooting and installing a newer rom can solve this porblem?
Hallo everyone.
I have just tried to follow this guide to install Google Play and so on: http://forum.xda-developers.com/showthread.php?t=2256075
Guide:
I'm here for help you, and yes I bought K900
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
INB file is here:
https://mega.co.nz/#F!xNdywAJA!AFbE_HikuoFODLpoc1j7Yg
But right after the message saying SDCARD UPDATE COMPLETED (as i remember it), the phone wont start again. The three buttons on the front flashes and nothing else happens.
Any clues to what might be the problem?
I hope you can help me!
Best regard
Jonas Kristiansen
Question
Hi Jonas,
Sorry to hear that.
Did you totally brick your phone? Can you still go into recovery or Hboot?
Is your phone recognized by adb and fastboot?
If you tell me more, maybe I can help.
Denis
Jonas Kristiansen said:
Hallo everyone.
I have just tried to follow this guide to install Google Play and so on: http://forum.xda-developers.com/showthread.php?t=2256075
Guide:
I'm here for help you, and yes I bought K900
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
INB file is here:
https://mega.co.nz/#F!xNdywAJA!AFbE_HikuoFODLpoc1j7Yg
But right after the message saying SDCARD UPDATE COMPLETED (as i remember it), the phone wont start again. The three buttons on the front flashes and nothing else happens.
Any clues to what might be the problem?
I hope you can help me!
Best regard
Jonas Kristiansen
Click to expand...
Click to collapse
Same problem
Hello
I have same problem, i brick my K900. I try to start it, but phone is really little ignorant, absolutly not response to all. Flash using xFSTK is without chance.
Yep, Recovery and DroidBoot is unavilable. Phone only one flash touch buttons and nothing more... :crying:
Can you help me? I thing, hard-brick is too hard to solve.
Sorry for my english...
Maybe it will be usefull:
Volume down, hold it, then power button, Testing Menu appear, Droidboot, Recovery, Clear cache, Clear data (factory reset), reboot.
how unbrick ur k900 device
Jonas Kristiansen said:
Hallo everyone.
I have just tried to follow this guide to install Google Play and so on: http://forum.xda-developers.com/showthread.php?t=2256075
Guide:
I'm here for help you, and yes I bought K900
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
INB file is here:
https://mega.co.nz/#F!xNdywAJA!AFbE_HikuoFODLpoc1j7Yg
But right after the message saying SDCARD UPDATE COMPLETED (as i remember it), the phone wont start again. The three buttons on the front flashes and nothing else happens.
Any clues to what might be the problem?
I hope you can help me!
Best regard
Jonas Kristiansen
Click to expand...
Click to collapse
(my english is veryyyyyyyyyy bad)
dont worry . there is a simple method :
this method work for hardbrick and softbrick too.
first download a favorite Rom you want
u can choice ur Rom from this page : http://m.kaskus.co.id/post/5300581ffbca17d47b8b457c#post5300581ffbca17d47b8b457c
download and install manufacturing flash tool and intel android device usb driver
https://dl.dropboxusercontent.com/u/26833962/K900 Tools/ManufacturingFlashTool_Setup_6.0.2.exe
http://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
second Refer this : http://forum.xda-developers.com/show...postcount=3245
This method require computer with driver and software installed and USB cable for sure
( unzip ur rom and open xml file on ur rom with manufacturing flash tool softwre)
maybe this video can help you too :
https://www.youtube.com/watch?v=BhvA_T694kw
This method works on my hardbrick device succeesfully
tatu63 said:
(my english is veryyyyyyyyyy bad)
dont worry . there is a simple method :
this method work for hardbrick and softbrick too.
first download a favorite Rom you want
u can choice ur Rom from this page : http://m.kaskus.co.id/post/5300581ffbca17d47b8b457c#post5300581ffbca17d47b8b457c
download and install manufacturing flash tool and intel android device usb driver
https://dl.dropboxusercontent.com/u/26833962/K900 Tools/ManufacturingFlashTool_Setup_6.0.2.exe
http://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
second Refer this : http://forum.xda-developers.com/show...postcount=3245
This method require computer with driver and software installed and USB cable for sure
( unzip ur rom and open xml file on ur rom with manufacturing flash tool softwre)
maybe this video can help you too :
https://www.youtube.com/watch?v=BhvA_T694kw
This method works on my hardbrick device succeesfully
Click to expand...
Click to collapse
hi tatu63
Me too got my K900 bricked while updating Rom from MFT .
Its not starting anymore. Complete black screen no menu lights at all.
When i connect my phone to usb cable it shows this in MFT tool and hangs up
07/01/14 12:47:15.886 DEBUG : New Android device -> serial: MedfieldEC710F76 status: 0 port: 1
and
Hai developers,
I have a Xolo Era which I rooted 1 month ago.Today I got an update for WiFi from the developer and I updated it.During the process I got error and now the phone is completely stuck .It restarts regularly showing the error "No command".When I press on the volume up button,it showing the recovery options.
I downloaded the Stock ROM Firmware (XOLO-era-S008-20150624.pac) and SPD upgrade tool from web.
But I do not have the Spreadtrum Drivers for my device.Kindly Help.
Or please give any alternative solution for this problem.
Android system recovery <3e>
XOLO-era-S012-24082015
What should I do...?
Can anybody help on this matter....Please.?
RAKESHBOSE said:
Hai developers,
I have a Xolo Era which I rooted 1 month ago.Today I got an update for WiFi from the developer and I updated it.During the process I got error and now the phone is completely stuck .It restarts regularly showing the error "No command".When I press on the volume up button,it showing the recovery options.
I downloaded the Stock ROM Firmware (XOLO-era-S008-20150624.pac) and SPD upgrade tool from web.
But I do not have the Spreadtrum Drivers for my device.Kindly Help.
Or please give any alternative solution for this problem.
Android system recovery <3e>
XOLO-era-S012-24082015
What should I do...?
Can anybody help on this matter....Please.?
Click to expand...
Click to collapse
Please anyone help on this issue.I copied the Downloaded Stock ROM to the external SD card and made a try to update the ROm.But the ROM (XOLO-era-S008-20150624.pac) is not showing in the SD Card.
Please anyone help.............
Is there any root for this version of Lenovo Note k52 e78 module, Or is this same as the K5 model ?
Will the current release CM 13 mod by scritch007 would work for this Phone??
http://forum.xda-developers.com/android/development/lenovo-k5-plus-cyanogenmod-13-t3432761
Phone Lenovo K52e78 – ROM Android 5.1
VIBEUI_V3.0_1615_15.518.1_ST_K52e78 – k52_e78-user 5.1 LMY47I
kickace7 said:
Is there any root for this version of Lenovo Note k52 e78 module, Or is this same as the K5 model ?
Will the current release CM 13 mod by scritch007 would work for this Phone??
http://forum.xda-developers.com/android/development/lenovo-k5-plus-cyanogenmod-13-t3432761
Phone Lenovo K52e78 – ROM Android 5.1
VIBEUI_V3.0_1615_15.518.1_ST_K52e78 – k52_e78-user 5.1 LMY47I
Click to expand...
Click to collapse
U found something ? I have same problem .... 1 week of searching but noting found for this Chinese model .
DoBrln said:
U found something ? I have same problem .... 1 week of searching but noting found for this Chinese model .
Click to expand...
Click to collapse
Same problem , But I have found a way to root. Just search for KINGROOT in XDA and use the PC version.
Connect your phone to the PC install the drivers and then youu can root this phone by KINGROOT. I have successfully rooted my device now.
DoBrln said:
U found something ? I have same problem .... 1 week of searching but noting found for this Chinese model .
Click to expand...
Click to collapse
Yes. This is original smartphone for chinese market. It supports all mobile networks in all countries.
After root u changed the ROM ? The recovery is the Chinese version I need to installed another . but I don't find a compatible ROM for this device .
I also have this version of K5 note (K52e78 ). I would like to update to Android 6.0 but havent found a rom yet.
Official ROM update 6.0 k52e78
Download Lenovo Smart Assistant
Connect your phone press UPDATE ( downloading update.rar 1.37 gb ) update fail DONT PANIC
Go to lenovo assistant folder and find UPDATE.RAR copy this RAR in your internal phone memory just in memory no in folder
Reboot your phone in chinese recovery ( vol+ vol- and power )
To translate the recovery use another phone whit google transalte installed and use camera translate from chinese to english
Flash the new UPDATE.RAR automatic reboot
Now your phone is up to date OFFCILAL ROM Android 6.0 Chinese Version
Only Chinese and English ......
Now u Have OTA UPDATE
If u need the UPDATE.RAR send me a mssage . I dont find a file hosting to share it.
Have fun ( im not responsable if u brick or damage your phone )
I have 2 lenovo k5 note k52e78 and the update is working great
Your Phone is still a chinese market phone based on UI not ROW version but is the same
NO ROOT
DoBrln said:
Download Lenovo Smart Assistant
Connect your phone press UPDATE ( downloading update.rar 1.37 gb ) update fail DONT PANIC
Go to lenovo assistant folder and find UPDATE.RAR copy this RAR in your internal phone memory just in memory no in folder
Reboot your phone in chinese recovery ( vol+ vol- and power )
To translate the recovery use another phone whit google transalte installed and use camera translate from chinese to english
Flash the new UPDATE.RAR automatic reboot
Now your phone is up to date OFFCILAL ROM Android 6.0 Chinese Version
Only Chinese and English ......
Now u Have OTA UPDATE
If u need the UPDATE.RAR send me a mssage . I dont find a file hosting to share it.
Have fun ( im not responsable if u brick or damage your phone )
I have 2 lenovo k5 note k52e78 and the update is working great
Your Phone is still a chinese market phone based on UI not ROW version but is the same
NO ROOT
Click to expand...
Click to collapse
I converted from Chinese and English ROM to an international one that is custom and I lost my IMEIs. I know that I can restore them with Maui Meta tool, but I can't for the life of me get it to connect with the tool. I always get stuck on a screen that says "phone has been in meta mode. Long press power button to boot normally". Any ideas what I might be doing wrong? Should I press any button when connecting the phone to USB?
Thanks for your help
Sent from my Nexus 5X using Tapatalk
I was able to connect it in metamaui version 9.1548, I did as follows:
- I opened the program and clicked on reconnect
- I turned off the phone
- I connected the cable (the first time it failed pos was installing the driver, I disconnected the cable reconnected and in 10 seconds it was already connected.
Now I have another problem, did you get the db files to insert the imei? If you have found the file, please let me know the link, because I have everything working but my device is without imei
tassos_chry said:
I converted from Chinese and English ROM to an international one that is custom and I lost my IMEIs. I know that I can restore them with Maui Meta tool, but I can't for the life of me get it to connect with the tool. I always get stuck on a screen that says "phone has been in meta mode. Long press power button to boot normally". Any ideas what I might be doing wrong? Should I press any button when connecting the phone to USB?
Thanks for your help
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
kmastrath said:
I was able to connect it in metamaui version 9.1548, I did as follows:
- I opened the program and clicked on reconnect
- I turned off the phone
- I connected the cable (the first time it failed pos was installing the driver, I disconnected the cable reconnected and in 10 seconds it was already connected.
Now I have another problem, did you get the db files to insert the imei? If you have found the file, please let me know the link, because I have everything working but my device is without imei
Click to expand...
Click to collapse
Couldn't even get it to connect with Meta MAUI even after 50 times at least, so I can't really help you. But you can find stock chinese ROMs here: http://lenovo-forums.ru/topic/20032-китайские-официальные-прошивки-для-vibe-k5-notek52e78/
Maybe you can get the db files from these ROMs
Thanks for link, you have try in another computer? My pc with windows 10, he instaled, but I need reboot then and enable install drivers for third...
Tassos, thanks, for me it worked, I used the modem file that was in the link that you gave me and I was able to restore the imei perfectly. I'm grateful to you, I work more with computers than with cell phones, maybe I need some help to connect your cell phone, I'm available, if you need me to connect your phone, I can even help you with teamviewer. Thank you
DoBrln said:
Download Lenovo Smart Assistant
Connect your phone press UPDATE ( downloading update.rar 1.37 gb ) update fail DONT PANIC
Go to lenovo assistant folder and find UPDATE.RAR copy this RAR in your internal phone memory just in memory no in folder
Reboot your phone in chinese recovery ( vol+ vol- and power )
To translate the recovery use another phone whit google transalte installed and use camera translate from chinese to english
Flash the new UPDATE.RAR automatic reboot
Now your phone is up to date OFFCILAL ROM Android 6.0 Chinese Version
Only Chinese and English ......
Now u Have OTA UPDATE
If u need the UPDATE.RAR send me a mssage . I dont find a file hosting to share it.
Have fun ( im not responsable if u brick or damage your phone )
I have 2 lenovo k5 note k52e78 and the update is working great
Your Phone is still a chinese market phone based on UI not ROW version but is the same
NO ROOT
Click to expand...
Click to collapse
can u share the update.rar
DoBrln said:
Download Lenovo Smart Assistant
Connect your phone press UPDATE ( downloading update.rar 1.37 gb ) update fail DONT PANIC
Go to lenovo assistant folder and find UPDATE.RAR copy this RAR in your internal phone memory just in memory no in folder
Reboot your phone in chinese recovery ( vol+ vol- and power )
To translate the recovery use another phone whit google transalte installed and use camera translate from chinese to english
Flash the new UPDATE.RAR automatic reboot
Now your phone is up to date OFFCILAL ROM Android 6.0 Chinese Version
Only Chinese and English ......
Now u Have OTA UPDATE
If u need the UPDATE.RAR send me a mssage . I dont find a file hosting to share it.
Have fun ( im not responsable if u brick or damage your phone )
I have 2 lenovo k5 note k52e78 and the update is working great
Your Phone is still a chinese market phone based on UI not ROW version but is the same
NO ROOT
Click to expand...
Click to collapse
Thanks so much man, This worked like a charm. Instead of going to chinese recovery mode. I used clockworkmod app and flashed the upgrade.zip file. And worked like a charm. Gets the OTA upgrades and all. Thanks So much.
DoBrln said:
Download Lenovo Smart Assistant
Connect your phone press UPDATE ( downloading update.rar 1.37 gb ) update fail DONT PANIC
Go to lenovo assistant folder and find UPDATE.RAR copy this RAR in your internal phone memory just in memory no in folder
Reboot your phone in chinese recovery ( vol+ vol- and power )
To translate the recovery use another phone whit google transalte installed and use camera translate from chinese to english
Flash the new UPDATE.RAR automatic reboot
Now your phone is up to date OFFCILAL ROM Android 6.0 Chinese Version
Only Chinese and English ......
Now u Have OTA UPDATE
If u need the UPDATE.RAR send me a mssage . I dont find a file hosting to share it.
Have fun ( im not responsable if u brick or damage your phone )
I have 2 lenovo k5 note k52e78 and the update is working great
Your Phone is still a chinese market phone based on UI not ROW version but is the same
NO ROOT
Click to expand...
Click to collapse
if u r rooted on lolipop and want to update without losing root flashfire app will help i guess
its from chainfire
pls confirm that it can update using flash fire without losing root
kickace7 said:
Thanks so much man, This worked like a charm. Instead of going to chinese recovery mode. I used clockworkmod app and flashed the upgrade.zip file. And worked like a charm. Gets the OTA upgrades and all. Thanks So much.
Click to expand...
Click to collapse
How did you use clockworkmod app to flash upgrade.zip if your phone isn't rooted and IF it is rooted, please please post how you did it. I have been looking for it all over the web and i couldn't find a way. KingoRoot & KingRoot doesn't seem to work. I tried to Android & PC versions none of them are able to root lenovo k52e78.
It would be greatly appreciated. Thanks
Btw, I have the marshmallow 6.0 k52e78
Pls heeeelp
DoBrln said:
Download Lenovo Smart Assistant
Connect your phone press UPDATE ( downloading update.rar 1.37 gb ) update fail DONT PANIC
Go to lenovo assistant folder and find UPDATE.RAR copy this RAR in your internal phone memory just in memory no in folder
Reboot your phone in chinese recovery ( vol+ vol- and power )
To translate the recovery use another phone whit google transalte installed and use camera translate from chinese to english
Flash the new UPDATE.RAR automatic reboot
Now your phone is up to date OFFCILAL ROM Android 6.0 Chinese Version
Only Chinese and English ......
Now u Have OTA UPDATE
If u need the UPDATE.RAR send me a mssage . I dont find a file hosting to share it.
Have fun ( im not responsable if u brick or damage your phone )
I have 2 lenovo k5 note k52e78 and the update is working great
Your Phone is still a chinese market phone based on UI not ROW version but is the same
NO ROOT
Click to expand...
Click to collapse
Hi. Could you sent me that file? Because if i download the Lenovo smart assistant and connat my phone and the i click on UPDTE ROM , then it fails on 0% of the download and i cant download the file . Also it says at InStorage 0/0.
I would be good if you could send me those files or just a fix for it.
mysticalmight said:
How did you use clockworkmod app to flash upgrade.zip if your phone isn't rooted and IF it is rooted, please please post how you did it. I have been looking for it all over the web and i couldn't find a way. KingoRoot & KingRoot doesn't seem to work. I tried to Android & PC versions none of them are able to root lenovo k52e78.
It would be greatly appreciated. Thanks
Btw, I have the marshmallow 6.0 k52e78
Click to expand...
Click to collapse
I was only able to root lollipop version, not marshmallow. :crying:
DoBrln said:
Download Lenovo Smart Assistant
Connect your phone press UPDATE ( downloading update.rar 1.37 gb ) update fail DONT PANIC
Go to lenovo assistant folder and find UPDATE.RAR copy this RAR in your internal phone memory just in memory no in folder
Reboot your phone in chinese recovery ( vol+ vol- and power )
To translate the recovery use another phone whit google transalte installed and use camera translate from chinese to english
Flash the new UPDATE.RAR automatic reboot
Now your phone is up to date OFFCILAL ROM Android 6.0 Chinese Version
Only Chinese and English ......
Now u Have OTA UPDATE
If u need the UPDATE.RAR send me a mssage . I dont find a file hosting to share it.
Have fun ( im not responsable if u brick or damage your phone )
I have 2 lenovo k5 note k52e78 and the update is working great
Your Phone is still a chinese market phone based on UI not ROW version but is the same
NO ROOT
Click to expand...
Click to collapse
can you please send me the UPDATE.RAR? i can't download it
I'm trying to get the UPDATE.RAR file using LMSA version 3.1.0.24, but it says my version is up to date (5.1 lollipop). Could you send me the UPDATE.RAR file for Android 6? Send to "[email protected]"
Hi, I just wanted to share the files and guide how to install updates / systems on LeEco Le S3.
I have an x626 model and everything works great, according to the information I found it should also work on the x622 model.
Files for MediaTek phones (Helio X20 in this case)
Installation:
update.zip
Download files
Put on your phone (root directory)
Power off the phone
Power & Vol+
Follow onscreen instructions
Be Happy
Fastboot
[Windows 10]
Install Drivers & ADB
Unpack files to folder "Flash" on desktop
Rename run.bat to systemflash.bat
Power & Vol- (Wait for fastboot mode)
Connect phone to PC
2-Click on systemflash.bat
Wait for the end of flashing process (10-20min)
Reboot your phone
Be Happy
Orange State remove
[Windows 10]
Power off the phone
Power & Vol-
Go to unpacked "platform-tools" folder
Shift + RMB & Open PowerShell console
Type "fastboot oem lock"
Wait
Type "fastboot reboot"
Be Happy
(Before next flashing u need to unlock flow using "fastboot oem unlock")
Downloads:
ADB & Drivers: https://forum.xda-developers.com/showthread.php?t=2588979
Platform-Tools (orange state): https://developer.android.com/studio/releases/platform-tools.html
[ TESTED, WORKING ] MultiLang Official Rom & ADB Files: https://www.needrom.com/download/leeco-letv-le-s3-x626-multilanguage-eu-fastboot-stock-rom/
Version 5.8.018S should unbrick your phone Google Play included
[ TESTED, WORKING ] EN/CN Official Rom (update.zip, only official recovery): https://www.needrom.com/download/leeco-s3-x626-official-stock-rom/
https://bbs.le.com//zt/eui/le_s3.html (Official link)
[ NOT TESTED ] EN/CN Official Rom & ADB Files: https://www.needrom.com/download/leeco-s3-x626/
[ NOT TESTED ] TWRP: https://www.needrom.com/download/twrp-leeco-3/
Can please give more information about the update ? Did he will fixe the problem ?
tiziano-petrov said:
Can please give more information about the update ? Did he will fixe the problem ?
Click to expand...
Click to collapse
What do u mean? List bugs or something
I'm now using 023S update and i didn't notice any bugs
AniMaya said:
What do u mean? List bugs or something
I'm now using 023S update and i didn't notice any bugs
Click to expand...
Click to collapse
on my behalf, i'm using 018S so i did't get any update ...... and i wounder if update will fix the know issues ?
and thanks for the reply
tiziano-petrov said:
on my behalf, i'm using 018S so i did't get any update ...... and i wounder if update will fix the know issues ?
and thanks for the reply
Click to expand...
Click to collapse
I didn't noticed any bugs on 023S On 018S i could not set the fingerprint lockscreen & there was none of the OTA programs, now there is "System Update" app
Please do explain the FASTBOOT to me clearly?
Can you please help me how to update my x626 to 5.8 018s fastboot? I dont know whay is fastboot and how. Can you please specify it to me clearly or one by one step. This my fb can you please message me there? facebook.com/MissKayeCenteno
Thank you so much.
MissKayeCentenk said:
Can you please help me how to update my x626 to 5.8 018s fastboot? I dont know whay is fastboot and how. Can you please specify it to me clearly or one by one step. This my fb can you please message me there? facebook.com/MissKayeCenteno
Thank you so much.
Click to expand...
Click to collapse
Let's cut off all the long stories and save us some stress. The process of updating is very simple. I just tried it and it worked perfectly. In fact, my x626 is still working very fine with some new features, like system update, introduced. Download the file, copy into your phone directory. Rename to update.zip(if you wish). Then click on the said file from the archives folder on your phone. It will give you two options in the unfolding dialogue; "extract" or "upgrade". Choose "upgrade" and you are pretty good to go...
Hi which file did you use? Im looking for software without the chinease software and Google apps
.
Orcaflugzeug79 said:
Is there a way to update to eui 5.9.xx with TWRP as recovery? Using a le s3 x626 with TWRP recovery. Did it just as you explained another member but nothing changed. Can I just install the downloaded zip file via "install" function in TWRP?
Help is appreciated
Click to expand...
Click to collapse
Yup, u can find ROM in LeEco Le 2 ROMs section Sorry for that, but now i can't add everything here. Later i'll add custom roms and working twrp script installer
Qazstar said:
Hi which file did you use? Im looking for software without the chinease software and Google apps
Click to expand...
Click to collapse
Today i'll add clean and custom roms + TWRP script
sorry... how to upload a cellphone from linux? :'(
someone has a link for the stock recovery sorry if it's already answered, but I didn't find.
Hello! Need official Android 8.1 for X626
hi, I can not install TWRP 3.1.1 on leeco x626
some advice or video idea on the internet
I also want to try TOOL ALL IN ONE, but I'm not sure
I recognize the device and adb but I want to make sure
Thank you
How do I put the files in the root directory if the phone is bricked? I don't know how to do that.
Is it true that LeEco recently launched LeX? Does it mean LeEco is now up and running? Let them help with the latest firmware for x626 or provide the source code needed by developers to do same. The phone OS has been stagnant for too long...
How this post will help me UnBricking x626 ? Help
LeEco x626 Wifi not detecting networks
My LeEco x626 the Wifi does not detect networks. Any idea qhere I can look for the problem and a solution?
Hello everyone.
I am new to this forum so please don't scold me . My brother had problems with his LeEco S3 x626, the phone disconnected from the mobile network and then froze and restarted.
I figured maybe that would be solved by flashing a new rom. While I attempted to unlock the fastboot/bootloader, the phone bricked and is now unusable.
I tried following this thread https://forum.xda-developers.com/le-...power-t3715937 and nothing worked. SPF displays CMD DA FAIL error.
Please help!!!