I like the Tudia Omnix case it is has 2 parts to the case, a built in screen protector and the rubber case. I am able to keep the pre installed screen protector that came with my phone on and still use this case. It's not bulky either. If I'm going to work or gym I'll put on the tudia case, it keeps my phone clean & safe, if I want to show off my phone I'll put on the Karbon or ebony wood. It's actually not that inconvenient to switch cases and my phone stays cleaner this way, less germs the better.
To install your phone on this case: take my advice it's kind confusing.
Lay the screen protector screen down, (the bottom of the screen protector has some kind of plastic hooks that attach the screen protector to the rubber protective case) slide your phone screen down in the bottom part & gently let the top of your phone fall into the screen protector, the left side will fall in but you'll have you to snap it in on the right. (the phone snaps in very lightly its easy to snap in or out)
NOW to put the rubber on the phone put the Top on first then kinda lift and pull the bottom ON
To take it off lift the lift off the bottom of the case by the headphone jack side, peel the other bottom side first then pull off, it's too hard to take the case off from the top.
Make sure not to make the mistake of putting the phone into the screen protector backwards I did that and scuffed the silver antenna line on my phone.
Do you have any images of the case actually on your phone? Posting images of whats on Amazon isn't particularly useful!
niijonodhg said:
Do you have any images of the case actually on your phone? Posting images of whats on Amazon isn't particularly useful!
Click to expand...
Click to collapse
Sorry I got lazy after writing my review
Is the protector tempered glass?
Can you take some pics of the phone in the case?
I want that.
---------- Post added at 04:05 AM ---------- Previous post was at 04:03 AM ----------
Do you get any rainbow effect on the screen when pressing on the screen protector? if you don't see try shining a light onto the phone.
I bought this same case for my OP5, as the Tudia case for my OP3 was the best. This case is beautiful and feels great in my hand, but I went back to my OtterBox because 1.) it was impossible to pull down anywhere on the status bar with my Tudia case, and 2.) I would get random pops when tapping the screen. I'm quite disappointed, because this is a beautiful and natural-feeling case, and it fits with my Orzly tempered-glass protector.
Binary Assault said:
Is the protector tempered glass?
Can you take some pics of the phone in the case?
Click to expand...
Click to collapse
No its plastic ish. I'm try to take some pics today with the phone in the case
alukarulz said:
I want that.
---------- Post added at 04:05 AM ---------- Previous post was at 04:03 AM ----------
Do you get any rainbow effect on the screen when pressing on the screen protector? if you don't see try shining a light onto the phone.
Click to expand...
Click to collapse
Im not sure I only use the case if I don't feel like being carful with my phone. Like I live in Las Vegas and if I go to the strip it's pretty wild your drinking, weeds legal, it's packed, your tipsy and everything else is going on. When I decide to put the tudia case on, I'm more trying to keep the phone safe. The case is nice but I wouldn't like this case on while I'm home or even running casual errands, I don't like the way the screen protector feels compared to the one that came pre installed. I bet it has the rainbow effect but i haven't tried it in the day Time yet though, I probably does cause the screen protector is thin plastic.
Rebel7022 said:
Sorry I got lazy after writing my review
Click to expand...
Click to collapse
Can you provide them on the phone?
Thanks for the review. If you manage to share some pictures with the case on the phone it would be great!
Related
http://www.ebay.in/itm/120788652244?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_5662wt_905
This is an excellent product - I've put it on the phone and then I've put a case over the top of it.
The reason I've done this is because I've noticed that any dust that gets between the phone and the cover/case acts like sand paper and scratches the surface - this plastic stuff is like a screen protector that goes over most of the phone.
It covers the back and the sides and around the keypad and around the front camera and the speaker etc.
There is also a piece that goes over the screen but I took this off because the current screen protector I have on is clearer to see through in the sun.
Its very easy to apply and goes on nicely without any ugly parts or mis-alignments.
Recommended to help keep your phone in good condition if you ever want to re-sell it.
Seems perfect, but my phone is scratched all over the place already . Not going to sell it anyway, but it looks bad. Backside is like this:
Mine oo :/
Im buying a white panel for it and putting that screen guard thing all over xo
sdk16420 said:
Seems perfect, but my phone is scratched all over the place already . Not going to sell it anyway, but it looks bad. Backside is like this:
Click to expand...
Click to collapse
You can also apply a skin onto the phone like the Zagg skins so you can protect from further scratches and also earlier scratches will be hidden..
---------- Post added at 09:40 AM ---------- Previous post was at 09:39 AM ----------
Qwerty123 \m/ said:
Mine oo :/
Im buying a white panel for it and putting that screen guard thing all over xo
Click to expand...
Click to collapse
Was is it easy for you to put up the invisible shield?? I had very difficulty in applying those so applied a skin instead..
protocol11 said:
You can also apply a skin onto the phone like the Zagg skins so you can protect from further scratches and also earlier scratches will be hidden..
---------- Post added at 09:40 AM ---------- Previous post was at 09:39 AM ----------
Was is it easy for you to put up the invisible shield?? I had very difficulty in applying those so applied a skin instead..
Click to expand...
Click to collapse
I want to keep the same colour from the back. I am considering just buying a replacement back cover, quite expensive at €15, but the shields are not that cheap either.
sdk16420 said:
I want to keep the same colour from the back. I am considering just buying a replacement back cover, quite expensive at €15, but the shields are not that cheap either.
Click to expand...
Click to collapse
I'm planing the same thing.. I don't trust the shields and stuff..
Will dust get (inside) under the screen easily?
I used in last 3 mobiles and invisible shield it´s great!!!!!
I am also using this shield for my white Neo V. It accumulates dust on some of the corners, rest it looks great and need a good amount of hard work to apply..
Had a Milestone once, putting the invisible shield on it was a pain, quite expensive too.. Sinse then I decided to use a simple cover, or just nothing since I switch phones about every year, and d damages shield is no good too.
The ebay link is not working :/
I have this on my Neo for the past 6 months. It attracts lot of dust if not properly applied I am in the process of removing it one bye one. I think only the back cover needs one. The rest will lose its finish once this is applied.
thanks!!
pretty hard to apply correctly
This needs a lot of patience to apply. I had one for about 5 months. The corners started accumulating dust and slowly started peeling off the edges. I had no choice but to remove and switch over to a rubber case.
Is this avaliable in Nepal as well... I too want to have this cover on my Neo??
I've found it on ebay.com for $9
This is also non-marking?
Unfortunately, access to this particular item has been blocked due to legal restrictions in some countries.
So true...
Sent from my MT11i
don't you think it will make your phone hotter during its peak performance?
Bought the fusion crystal case from Ringke:
GOOD:
- Completely transparent to show off Z5P's sexy back
- Grip is pretty solid
- Caps for both the headphone jack and the USB port provides additional protection for when you have that occasional dip in the pool.
- Looks premium; doesn't look cheap
- Has these four little bumpers at the back to prevent the case from being scratched when put on a flat surface
- Volume rocker and power rubbers can be easily pressed
- Scratch-resistant (so far)
- Comes with free screen protectors for both front and back
BAD:
- Fingerprint magnet (so you need to wash it after a hard day's use)
How is that and where did you get it from?
I have this one as well. Ordered from Amazon. Took forever to arrive, I think it is just becoming available. Very happy with it. Really zero complaints. Came with front and rear PET screen cover that work nicely to protect the back (didn't use it on the front, already had another screen protector). The insert said this was to prevent visual artifacts. It's a nice bonus.
Lad said:
How is that and where did you get it from?
Click to expand...
Click to collapse
i'm from canada so i bought it at amazon.
kcteun said:
I have this one as well. Ordered from Amazon. Took forever to arrive, I think it is just becoming available. Very happy with it. Really zero complaints. Came with front and rear PET screen cover that work nicely to protect the back (didn't use it on the front, already had another screen protector). The insert said this was to prevent visual artifacts. It's a nice bonus.
Click to expand...
Click to collapse
didn't use the screen protectors as i also already have my front screen protector and i don't want to cover the glass effect at the back. the back protector was matte so it covers the mirror back and i've always used the back as a mirror.
when i put on the back protector is clear as i can still see the mirror, after removing the top layer sticker which is part (2) my back protector goes matte. i suddenly feel so disappointed. the matte back looks nice but i still prefer the mirror back. im struggling should i remove the back protector as it is a very good quality and when i stick it on theres very little bubble and easy to take out those bubble.
Lawliet918 said:
didn't use the screen protectors as i also already have my front screen protector and i don't want to cover the glass effect at the back. the back protector was matte so it covers the mirror back and i've always used the back as a mirror.
Click to expand...
Click to collapse
Really? The back tempered glass of Rignke removes the glass effect in the back side?
U should test with another screen protector like Nillkin or Rhidon
I also have this case. My Chrome z5p looks gorgeous in this. Quality
Transparent with 1 year
Enviado de meu E6853 usando Tapatalk
Hi everyone, I am using Ringke Fusion Smoke Black for my Sony Xperia Z5 Premium. I have selected smoke black after reading some online reviews & some fitting issue, as after some time clear one gets yellowing. I am happy with smoke black.
ill be getting the smoked black one in the mail soon will report back with a small review
do this case makes the phone a lot hotter ?
otaolaurruchi said:
do this case makes the phone a lot hotter ?
Click to expand...
Click to collapse
No it does not make the phone hotter
Too thick for my taste...
Sent from my Xperia Z5 Premium!
Got a scratch 1st day... And I have a too big gap at the back around the cam so dust comes in between the case and the phone. Annoying on a black phone... Good fit besides that
Infraaa said:
Really? The back tempered glass of Rignke removes the glass effect in the back side?
U should test with another screen protector like Nillkin or Rhidon
Click to expand...
Click to collapse
No it doesn't. I am using a Ringke case with the back screen protector now and it's a perfect mirror.
It's not actually a tempered glass screen protector it's a very thin layer that (supposedly) prevents a rainbow effect occurring if you use the Ringke case - but of course it also provides some protection as well.
No idea what this person did ... maybe they somehow forgot to remove the protective packaging?
diji1 said:
No it doesn't. I am using a Ringke case with the back screen protector now and it's a perfect mirror.
It's not actually a tempered glass screen protector it's a very thin layer that (supposedly) prevents a rainbow effect occurring if you use the Ringke case - but of course it also provides some protection as well.
No idea what this person did ... maybe they somehow forgot to remove the protective packaging?
Click to expand...
Click to collapse
Got mine yesterday, smoke black, and my pone looks great. You have to use the back cover and everything will work and look as intended. Good qualiy case but a bit pricy
This is the best case for z5p. Its not over protected, but just enough. Also fits perfect.
Huge fan of Ringke Fusion cases in general, as I used them on few of my past phones. I will go as far as saying this is probably the best case of this clear/hybrid type in general, beating even the Spigen Ultra Hybrid which is quite hyped case. I find Ringe Fusion extremely precisely built, with perfect cutouts, and also the button cover sections are very easy to press, and you perfectly feel the "click" underneath. One more thing I like, is that the surface is so gentle to wipe, and not sticky at all, like some kind of oleophobic coating for plastic is there. I'm using the smoke black version on my Z5P, and I love it, along with matt protector for back side which takes away some of the mirror effect, but also reduces smudges and dust visibility.
Sent from my E6833 using Tapatalk
I am using this too, protection is superb, design details are satisfying, well considerate,
So.... This set up is actually working pretty well for me.
Uag metropolis with a full edge to edge( only speaker cut out and black border)screen protector. The case wraps around the top and bottom and the side are so low pro that they dont bump the sides of the glass.
I have also noticed that when you first put the screen protector on the touch sensitivity is par...but the longer its on the better it gets....maybe the naturalized air gap pressure dies off...or i am just getting use to it.
I havent really seen much on the metropolis and just thought i would share my setup.
Update: changed out the first screen protector because i just wanted to see if there was a difference.... 100% better on the second one that came in the 2 pack. Its unreal how much better touch sensitivity is between the 2.
On a 10 scale(the screen protector) i would say its a 9 for the case setups im using. Case #1 uag metropolis and work case is ghostek nautical with screen removed.
Its this one
https://www.amazon.com/gp/aw/d/B071...SX236_SY340_QL65&keywords=s8+screen+protector
which screen protector?
---------- Post added at 10:56 AM ---------- Previous post was at 10:21 AM ----------
huh....I've been looking for "case friendly" ones
But you're saying with this case, the full cover ones work?
I can't seem to find anything that works with the metropolis
Insert the bottom of the phone into the bottom of the case at an angle then pull up the top of the case over the top of the phone. The case actually helps hold the protector from lifting.
Im trying out my new ghostek exec atm. If u want i can upload some pics later of it.
Btw.. the ghostek exec does not work with the glass protector
I tried that with the official samsung protector but no go, i think it's actually too short and easy to press up
Maybe a full cover is next on my list
some pictures would be great thank you
Some pics
IM GOING TO BUY THIS ANY COMPLAINTS ? is the magnet on this case is effecting compass ?
So I was wondering if anyone has seen or used a Tempered glass screen protector for the OP5 that covers the screen only, and not the top and bottom bezels. I say this cuz I have some sick looking Dbrand and Xtremeskinz skins on the way here, but all I can find are the full body screen protectors. Any help would be appreciated.
I'm having the same dilemma, some would say get a cut out screen protector. Any opinions?
That would be a ridiculous idea, it would catch on anything and everything and lift every 2 minutes, imagine putting it in your pocket, going to get the phone out of your pocket and the protector stays in there and snaps.
djsubterrain said:
That would be a ridiculous idea, it would catch on anything and everything and lift every 2 minutes, imagine putting it in your pocket, going to get the phone out of your pocket and the protector stays in there and snaps.
Click to expand...
Click to collapse
What would be your suggestion sir?
lescrios said:
What would be your suggestion sir?
Click to expand...
Click to collapse
Just use a full face protector, if you want vinyl applied then do it on top of the protector. Most of the vinyls come in separate pieces anyway. To be honest, I never apply vinyl to the face anyway, only the back, I don't even put them on the top/bottom cos I use a bumper with it so that's pointless.
djsubterrain said:
Just use a full face protector, if you want vinyl applied then do it on top of the protector. Most of the vinyls come in separate pieces anyway. To be honest, I never apply vinyl to the face anyway, only the back, I don't even put them on the top/bottom cos I use a bumper with it so that's pointless.
Click to expand...
Click to collapse
+1
Hi,
I am using a Gadgetshieldz screen protector on my S7. I am looking for a case/back cover something like this-
http://www.ebay.in/itm/BACK-COVER-F...845565?hash=item212b81c4bd:g:ZEUAAOSwknJX0bgs
https://www.amazon.in/Sandstone-Qui...36912&sr=8-5&keywords=samsung+galaxy+s7+cover
just to cover the back part of the phone and to get some grip. I have ordered like hundred's of cases from different websites but they mess up the protector eventually. Can you guys please suggest any case which won't mess up the protector? The thickness of the case don't matter as I just need it for the grip.
Thanks
I literally just went to Walmart and got the 2 layer and also the 1 layer protection case from bodyglove. For just that reason. Protect the sides and back but don't mess up my protector. It leaves a slight gap between the screen protector and the case so it will never mess it up. Perfect for me. And wireless charging still works. The cases are cheap and do exactly what I want.
Kreatur3 said:
I literally just went to Walmart and got the 2 layer and also the 1 layer protection case from bodyglove. For just that reason. Protect the sides and back but don't mess up my protector. It leaves a slight gap between the screen protector and the case so it will never mess it up. Perfect for me. And wireless charging still works. The cases are cheap and do exactly what I want.
Click to expand...
Click to collapse
Can you share the photos of your case?
I ordered more cases in the meantime and the result was the same. I saw someone having a s8 and his case having edges only on the top and bottom. The sides weren't having any protection. Are those kinda cases available for the s7?
billubakra said:
Can you share the photos of your case?
I ordered more cases in the meantime and the result was the same. I saw someone having a s8 and his case having edges only on the top and bottom. The sides weren't having any protection. Are those kinda cases available for the s7?
Click to expand...
Click to collapse
I could but it's my only way to take pics so not with the phone in it which defeats the purpose lol. I'll see if I can take pics tomorrow with someone else's phone and text them to myself. If you go to Walmarts website and search for s7 cases or s7 bodyglove cases it's probably the 2 cheapest ones they sell haha. They are super thin and like silicone. Perfect for me. I'll try to get pics with the phone in the case tomorrow.
Kreatur3 said:
I could but it's my only way to take pics so not with the phone in it which defeats the purpose lol. I'll see if I can take pics tomorrow with someone else's phone and text them to myself. If you go to Walmarts website and search for s7 cases or s7 bodyglove cases it's probably the 2 cheapest ones they sell haha. They are super thin and like silicone. Perfect for me. I'll try to get pics with the phone in the case tomorrow.
Click to expand...
Click to collapse
Unfortunately Walmart in my area is not selling the same. But if I get the photos I can ask the sellers on eBay to arrange a case like that for me. Will wait for the photos. I tried a case last night also and it was crap. The cases that they have for the s7 edge in which the sides don't have any case protection just the lower and upper part of the phone, I am eyeing that for the s7.
billubakra said:
Hi,
I am using a Gadgetshieldz screen protector on my S7. I am looking for a case/back cover something like this-
http://www.ebay.in/itm/BACK-COVER-F...845565?hash=item212b81c4bd:g:ZEUAAOSwknJX0bgs
https://www.amazon.in/Sandstone-Qui...36912&sr=8-5&keywords=samsung+galaxy+s7+cover
just to cover the back part of the phone and to get some grip. I have ordered like hundred's of cases from different websites but they mess up the protector eventually. Can you guys please suggest any case which won't mess up the protector? The thickness of the case don't matter as I just need it for the grip.
Thanks
Click to expand...
Click to collapse
I use the SUPCASE Unicorn Beetle - it is a combination grip-case and snap-in holder (the case snaps into the holder, which clips on). The audio and power jacks have covers, but they can be uncovered to access those jacks - that means that the cover can be left on. The sides are neoprene, and the back and holder are hard plastic (all in basic black). $12.99 USD @ Amazon.
PGHammer said:
I use the SUPCASE Unicorn Beetle - it is a combination grip-case and snap-in holder (the case snaps into the holder, which clips on). The audio and power jacks have covers, but they can be uncovered to access those jacks - that means that the cover can be left on. The sides are neoprene, and the back and holder are hard plastic (all in basic black). $12.99 USD @ Amazon.
Click to expand...
Click to collapse
By the looks of it, it will also mess up the protector installed
https://www.amazon.com/gp/aw/d/B01B...5&keywords=supacase+unicorn+beetle+samsung+s7
I like my Speck Candyshell case. It's stout enough to offer good protection, while still being pocket friendly. It's kind of a pain to insert/remove the phone since it's a very tight fit, but it doesn't interfere at all with my Walmart brand tempered glass screen protector.
ApexPredatorBoids said:
I like my Speck Candyshell case. It's stout enough to offer good protection, while still being pocket friendly. It's kind of a pain to insert/remove the phone since it's a very tight fit, but it doesn't interfere at all with my Walmart brand tempered glass screen protector.
Click to expand...
Click to collapse
I'm thinking of getting one. How is it holding up for you? specifically are the rubber strips coming off? or the gloss plastic prone to scratches?
---------- Post added at 09:20 PM ---------- Previous post was at 09:17 PM ----------
billubakra said:
Hi,
I am using a Gadgetshieldz screen protector on my S7. I am looking for a case/back cover something like this-
http://www.ebay.in/itm/BACK-COVER-F...845565?hash=item212b81c4bd:g:ZEUAAOSwknJX0bgs
https://www.amazon.in/Sandstone-Qui...36912&sr=8-5&keywords=samsung+galaxy+s7+cover
just to cover the back part of the phone and to get some grip. I have ordered like hundred's of cases from different websites but they mess up the protector eventually. Can you guys please suggest any case which won't mess up the protector? The thickness of the case don't matter as I just need it for the grip.
Thanks
Click to expand...
Click to collapse
https://www.ebay.in/itm/Caseous-Des...hash=item3d3fa32d90:m:mjImk9ZoWA6w4grke8hH5ag
This is a good fit and I think if you have a screen protector just on the screen then it shouldn't be a problem.
agambhandari said:
I'm thinking of getting one. How is it holding up for you? specifically are the rubber strips coming off? or the gloss plastic prone to scratches?
---------- Post added at 09:20 PM ---------- Previous post was at 09:17 PM ----------
https://www.ebay.in/itm/Caseous-Des...hash=item3d3fa32d90:m:mjImk9ZoWA6w4grke8hH5ag
This is a good fit and I think if you have a screen protector just on the screen then it shouldn't be a problem.
Click to expand...
Click to collapse
Agam it is good considering there is no tempered glass alternative but one thing I would like to suggest you my brother please do not go for any kind of cover from the market because I have tried like millions of them and every cover will eventually mess up your screen protector and the strips on the sides. Bottomline do not use any cover if you are using gadgetshieldz protector.
billubakra said:
Agam it is good considering there is no tempered glass alternative but one thing I would like to suggest you my brother please do not go for any kind of cover from the market because I have tried like millions of them and every cover will eventually mess up your screen protector and the strips on the sides. Bottomline do not use any cover if you are using gadgetshieldz protector.
Click to expand...
Click to collapse
Oh I was worried about that, I think you should install a skin at the back. Like a leather or sandstone one.
If you find a good tempered glass for s7 in india, do mention it. Since Samsung had the offer of 1 yr screen replacement, I'm braving it without any screenguard right now.
agambhandari said:
Oh I was worried about that, I think you should install a skin at the back. Like a leather or sandstone one.
If you find a good tempered glass for s7 in india, do mention it. Since Samsung had the offer of 1 yr screen replacement, I'm braving it without any screenguard right now.
Click to expand...
Click to collapse
I have installed the complete set of Gadgetshieldz which covers the phone 360 degrees. There is no tempered glass for these curved/fully curved phones, period. I would suggest you to install GS protector. It will be better than having no protector at all.
agambhandari said:
I'm thinking of getting one. How is it holding up for you? specifically are the rubber strips coming off? or the gloss plastic prone to scratches?
Click to expand...
Click to collapse
After 3-4 months of use, the rubber is still perfect. Since I live in the Arizona desert, there's sand everywhere, so there are many tiny scratches on the rear glossy plastic. If you're not in an area where literally everything is coated in a fine, abrasive sand, I have a feeling the plastic would probably show considerably less wear with normal usage. All in all, I've been very satisfied with the Candyshell. For a $7 clearance item I found at Walmart, I think I got a steal.