Hey Guys,
my elephone p9000 recently fell and the screen broke. It was off, so when starting, i could not enter my PIN. Thus, I cannot access the phone's data... I ordered a screen from aliexpress and was hoping that I wouldnt need to flash it afterwards, but as it stands, the screen backlight only turns on, no jingles or anything else. When connecting to my computer, the computer says it's unable to connect to the device. I installed Elephone p9000 ADB drivers hoping it would work then, but to no avail.
Is there anyway to backup my data before flashing with no control over the screen whatsoever?
thanks and best
:crying:
Resolved.
Related
My partner recently dropped her SGS3 from about 2 feet onto the floor. It was in a rubber case (ZeroLemon battery case) but the screen is now black. It's not cracked at all and the digitizer still works fine and the phone rings and if you touch the screen in the right place you can answer calls etc.
For a few days prior to this there were occasional lines on the screen and I suspected a loose connection at the time. After the drop and the screen going black I took it apart and sure enough the ribbon cable to the screen had popped off. I have put the cable back on but the screen is still black. When turning the phone off and on, the backlight does flicker on for a split second but there is no graphics on the screen visible. Even booting into download or recovery mode nothing is visible on the screen.
It was running CWM recovery (I can't remember which version) and CyanogenMod 10 (unsure of the exact version) and we desperately need to access some data from the phone, particularly the contacts and text messages. Is there a way we can recover this or gain remote control of the phone from a computer at all? I've seen several posts about using the SDK and ADB to do this but USB debugging is disabled so this wouldn't be an option. I've also read that it's possible to get an adb shell to enable debugging from CWM but can't seem to find any clear instructions on how to do this, I've booted into CWM and tried the adb tools but it does not list the phone.
Can anyone advise why the screen wouldn't work after plugging it in again? Or is there any other way to control the phone from a computer without usb debugging being enabled? My partner is desperately trying to access her google account and this phone is the only device that's logged in and is her only hope to recover the account.
Hi guys,
My screen recently died. Before fixing it at a specialized shop, I want to retrieve the data from the phone. Sadly the phone is pattern-locked and until I unlock it I can't access the data when I connect it to my PC. The screen is essentially dead. The image is almost totally black except for small layer in left top corner and the touch sensor is unresponsive, but other than that the phone works and receives notifications and so on.
USB Debugging mode isn't active on the phone and thus I can't replicate the screen of the phone on my PC through software alone, when I connect it via micro-USB. I also didn't think of this problem in advance and I'm not registered on Sony's FindMyMobile or any similar apps.
I tried using a HDMI-MHL adapter and I confirmed that the phone is indeed working because I'm able to get the phone screen's image on my TV. The problem is I can't actually interact with the phone because as I said earlier the touch sensor is not working.
The HDMI-MHL adapter I've used also seems to have a micro-USB port but that seems to work for power only. If I connect a USB-OTG cable on it and connect a USB mouse to it I get image but no mouse. If I connect the USB-OTG and the mouse, alone, I get a mouse cursor but I can't see what I'm doing (phone vibrates as I 'try' and draw the unlock-pattern blindly).
So, Sony Xperia Z3 Compact screen is dead, I wanna connect my Xperia to my TV via HDMI AND use a mouse at the same time to control my phone. Is this possible_
I also thought of another option... go to recovery mode and flash a zip that removes lock. I thought of trying step by step (switch keyboard and TV al the time just to get at point where I can find zip file and flash it). Unfortunately in recovery mode the phone does not allow to stream to TV. It only works when phone is after SIM lock.
Two additions: by removing and re-installing ADB on my laptop my phone is unauthorized. Only a matter of clicking on yes/allow on phone but that's not possible and TWRP 3.1.1-0 is installed.
Anyone any clue? I know I ask a lot but I'm searching the internetz for 2 days now and I'm devistated.
THNX a great bunch!!!
ciao
Valentijm
PS Copy/paste a part of the text from a guy from the internet who had exactly the same problem as I did but his thread ended a few months ago without result.
Just 30 minutes after my post I magically had all the dots correct and that blind!!! So turned on USB debugging and got rid of lock pattern. It was a nice three days of my life Guess there was no solution than getting lucky like I did or screen replacement and getting all your data removed.
ciao
Hello,
I am presently facing a strange issue with my Lyf Water 8. Nothing has gone wrong on my phone for almost 2 year but recently, impossible to charge my battery while my phone was on also I am unable to connect my phone through USB. Today, after a few weeks thinking my phone was just dying, I have tried to make a back up and wanted to save all my data on my computer. However, impossible to connect my phone to my computer. Then I realized the problem was probably due to my USB parameters (No interface asking for mode to choose when I plug USB).
I can only use USB while my phone is OFF, meaning I only charge my phone when it is OFF.
I did not find any solution on internet and did not find an option to allow this interface to come back, even by trying to go in "developer options" as it is unable to connect through USB.
I have tried factory resetting my phone but nothing seems to solve my problem.
Could you please help?
Thanks
Omair
Ever since a few days ago, my LG G5 became very unresponsive. I can only turn off my phone by taking out the battery (which is probably not good) and when I turn on my phone, it only stays responsive for about 10 seconds before I cannot do anything; I can't turn off the phone using the power button (nor hold it down for a hard power off), I can't turn up or down the volume, I can't touch my screen anywhere. At first I thought this might be a hardware problem, and it might still be, but when I turn on the phone it stays perfectly responsive for 10 seconds. No problem turning on and off the phone, volume works and I can touch the screen. Then the phone freezes. The screen is still on and working as notifications are popping up and the wifi and service bars are still going up and down. All I am trying to do is turn on file transfer to send all my photos and videos to my computer. My phone is cracked pretty badly at the top and I do get a static line through my phone but giving the fact that it works for the 10 seconds, I wasn't sure if it had to do anything with the screen and power button becoming unresponsive.
P.S. I am getting a new phone but I would really like to get the photos and videos off this phone. If there is a way to turn on file transfer without using the screen then please let me know too.
EDIT: I think that there are some spots on the screen that are ghost touching as the pull down menu seems to shake and the phone occasionally turns off on its own (double tapping same spot)
Hi, if you have TWRP installed (or USB debugging already enabled) you can use the ADB PULL command to retrieve the photos from the phone. You can also simply use the MTP transfer by just connecting the phone to the PC with the cable.
If you have an OTG USB adapter you can connect a mouse to the phone and use it instead of the touchscreen to do what you want.
Then, when you have retrieved you photos, you may try to factory reset the phone by booting in stock recovery (if you don't have TWRP) or wiping system partition and reinstalling the ROM (if you have TWRP), to check if the unresponsiveness is caused by the broken touchscreen or maybe by some virus.
tremalnaik said:
Hi, if you have TWRP installed (or USB debugging already enabled) you can use the ADB PULL command to retrieve the photos from the phone. You can also simply use the MTP transfer by just connecting the phone to the PC with the cable.
If you have an OTG USB adapter you can connect a mouse to the phone and use it instead of the touchscreen to do what you want.
Then, when you have retrieved you photos, you may try to factory reset the phone by booting in stock recovery (if you don't have TWRP) or wiping system partition and reinstalling the ROM (if you have TWRP), to check if the unresponsiveness is caused by the broken touchscreen or maybe by some virus.
Click to expand...
Click to collapse
So I did figure out a way to connect my phone to my computer by using Vysor. Because Charging only was enabled, I couldn't transfer my files. So when using Vysor I turned on File Transfer which then got the phone to be able to transfer files. Fast forward to today I remembered that I also need to save my contacts so I tried using Vysor again but now because the phone is on File Transfer only I can't use it. Do you know of a way to switch back to original settings?
Davidkm8 said:
So I did figure out a way to connect my phone to my computer by using Vysor. Because Charging only was enabled, I couldn't transfer my files. So when using Vysor I turned on File Transfer which then got the phone to be able to transfer files. Fast forward to today I remembered that I also need to save my contacts so I tried using Vysor again but now because the phone is on File Transfer only I can't use it. Do you know of a way to switch back to original settings?
Click to expand...
Click to collapse
Maybe the contacts are saved in Google Contacts, try logging into the website and see what shows up.
Hello folks, my display broke suddenly, cannot see anything except a line and some green flickering when display is on. I have most of the documents and everything stored on my SD card but the Whatsapp data is unfortunately not backed up. There are a few pictures and chat data that I would need to access from there.
The situation is like this - Display broke but the phone works also touch apparently works too since Double tap makes the display light up in green (cannot see anything), and double tapping again makes the screen off. There are notifications coming. USB charging works. Shows up on the PC but the MTP won't show anything since screen is locked. I rebooted the phone which was the mistake !! because now it asks for pattern. I cannot unlock this, tried blind so many times but since I disabled the vibration. It's hard to get the pattern. Fingerprint scanner works but it won't unlock with it (so it just vibrates saying need to use pattern on screen due to reboot, the usual behavior)
Phone specs and OS are in my sig - Stock OS, Rooted, TWRP.
Can anyone please help if there's any way to access the filesystem ? It would be great if there's a way for accessing the data. My other request would be, can I make a data backup of the ROM as is with LGUP ? then reset it all before sending to LG for a full repair as I like this phone a lot.
Thank you for your time.
boot to twrp and then plug it in on PC and browse the file there? if you cant go to recovery from power off, maybe go to fastboot first then do the command to go to recovery.
figure out how to cast the display on a tv? i think the usb port supports HDMI output so maybe plugging it to a tv would work.