Since I've been getting requests lately due to Google's updated Google Drive policy - here's the updated share link for the M4 Aqua kernels:
M4-Aqua_Kernels - Google Drive
drive.google.com
Nautilus Kernel for Xperia M4 Aqua​
Disclaimer:
By flashing this kernel you acknowledge that the developer is NOT liable for any loss of data, does NOT guarantee any fitness of functionality or non-harm to your phone. You are advised to backup the kernel and ROM before flashing any release which will overwrite the existing wlan module and will lead to broken WiFi when switching to e.g. Destiny kernel
Notes:
(thanks to dani020110 for idea of the thread/post structure and the kernel update script)
[*]THIS WILL WORK ONLY ON UNLOCKED BOOTLOADERS
26.3.A.1.33 Marshmallow only
Features:
reduction of external kernel modules for less attack surface and better stability and protection
lots of power-saving improvements/reductions in idle
separate built WiFi module
reduction of wakelock of WiFi driver
ARP spoofing protection
fuse-fixes
in-built exfat driver (allows file-sizes on microSD of 2+ GB, better stability)
mm: stability improvements
several speedups in the core of the kernel
writeback speedups / improvements
attempts to pass SafetyNet
zram with lz4 + z3fold allocator (NO internal memory fragmentation !) [Port from Xperia Z5]
battery reduction in usage of Google Chrome & Chrome-based browsers (webkit / webview ?)
in-built core_ctl driver (better reliability and stability)
several improvements to the sound driver
and other changes too small to mention separately
optimized kernel config to speed up booting and slim down bloat
4.9 Linaro Toolchain
optimized flags to allow further optimizations and better stability
Installation
M4 Aqua - Booting into fastboot mode
Getting into Fastboot - From the system (Android):
adb reboot bootloader
Getting into Fastboot - Alternatively (while the phone is off):
Shutdown down the phone (power it off):
Connect the USB cable to your phone (your phone only !)
Press the Volume DOWN button, keep it pressed ...
Connect the other end of the USB cable to your PC/Mac, etc. and release the Volume DOWN button
That should get you into fastboot mode (led is blue)
Additionally you can check from your PC/Mac/Linux system if the device is there: fastboot devices
Finally - Flashing the Kernel (from Fastboot)
(WiFi might NOT work ! - thus flashing from TWRP/recovery is most times better (copying updated WiFi module))
fastboot flash boot boot.img
fastboot reboot
Flashing the Kernel via TWRP/Recovery
Booting into TWRP
Press the Volume DOWN button, keep it pressed
While pressing the Volume DOWN button also press the Power Button
As soon as the screen turns on and you see the Sony logo ("splash"), release the Power Button - now ONLY keeping the Volume DOWN button pressed
When you see the TWRP Logo ("splash" / screen), release the Volume DOWN button
Once you are IN TWRP, the select the folder where the Kernel zip-file was copied to and flash ("install") it
(you must have flashed TWRP via fastboot flash recovery TWRP.img before to boot into recovery !)
Download:
https://drive.google.com/open?id=0BykGGWB96CBQUFhXbG5sRUZMMWM
Thanks, acknowledgments:
dani020110
AndyPhoenix9879
and all the other kernel devs on XDA
XDA:DevDB Information
Nautilus-Kernel for Xperia M4 Aqua, Kernel for the Sony Xperia M4 Aqua
Contributors
zacharias.maladroit, dani020110, AndyPhoenix9879
Source Code: https://github.com/zachariasmaladroit/android_kernel_sony_msm8994_kitakami_r2/commits/Nautilus_I.1
Kernel Special Features:
Version Information
Status: Testing
Created 2017-08-30
Last Updated 2017-08-30
Reserved
Reserved
The kernel currently is at a pretty early stage,
so bear with me - it's totally not where I want it to be (FauxSound, memory management improvements, even more battery/idle reductions, smoother operation, etc.)
but lack of time and focus on Xperia Z5* devices doesn't allow me to focus on it right now ...
First of all, thank you so much for diving into the development of this device. I was eager to get something like this from you and I honored to have it now and here.
At first, the kernel seems stable. There was quite a big lag at the first start up and it took a while for the WiFi to turn on but it's fine. I can't see any hotplug included in the kernel and SuperSU binaries are outdated. It seems like there isn't also undervolt and underclock included. The GPU idles at 400MHz which isn't quite power efficient. Overall it's good for a start. I also have a question which is for the touchscreen drivers for this phone. No matter the kernel, stock or custom, there are problems with the random shutting down of the touchscreen or going nuts (scrolling and pressing by itself randomly). I'm looking that the logs and it seems like that the cyttsp5 driver isn't functioning properly on the E2303 variant. I've attached dmesg and klog so you can take a look at it. Also, I'm not the only one with this problem, there are much more users in Q&A and on random forums and YouTube.
dmseg
log
How can i backup current all of there (kernel, wlan,...)? before flash it
windows112009 said:
How can i backup current all of there (kernel, wlan,...)? before flash it
Click to expand...
Click to collapse
Backup your boot and system using twrp!
dani020110 said:
Backup your boot and system using twrp!
Click to expand...
Click to collapse
Can i use this for E2312 phone?
So thanks!
windows112009 said:
Can i use this for E2312 phone?
So thanks!
Click to expand...
Click to collapse
Of course you can
How does it compare to other kernels?
Does this kernel work with the Pexo rom?
I really REALLY want a kernel that has proper undervolt tables, because I can't stand my phone overheating randomly. Using Skymelon 9, it's alright but brings problems like overheating since it's running at higher frequency and the phone is already semi-snappy and I am not really gaming, since no games work that I like. For instance Shadowverse or Fate Grand Order. First game stutters and audio is distorted, while second game won't launch because phone is rooted.
zacharias.maladroit said:
The kernel currently is at a pretty early stage,
so bear with me - it's totally not where I want it to be (FauxSound, memory management improvements, even more battery/idle reductions, smoother operation, etc.)
but lack of time and focus on Xperia Z5* devices doesn't allow me to focus on it right now ...
Click to expand...
Click to collapse
Thanks for your Work Bro
cirnocirno said:
How does it compare to other kernels?
Does this kernel work with the Pexo rom?
I really REALLY want a kernel that has proper undervolt tables, because I can't stand my phone overheating randomly. Using Skymelon 9, it's alright but brings problems like overheating since it's running at higher frequency and the phone is already semi-snappy and I am not really gaming, since no games work that I like. For instance Shadowverse or Fate Grand Order. First game stutters and audio is distorted, while second game won't launch because phone is rooted.
Click to expand...
Click to collapse
No reason for it to not work with PexoROM
Mobile Data don't work on E2363 (dual) and kernel governor stay on "performance", all other is OK.
Keep your good work .
valyo_bg said:
Mobile Data don't work on E2363 (dual) and kernel governor stay on "performance", all other is OK.
Click to expand...
Click to collapse
Mobile data works here. For performance governor fix get the original init.qcom.post-boot.sh and put it in system/etc
@DavidMKD Its shows that mobile data is enabled, but there is no icon for 3g/LTE and every app report that phone is offline when WiFi is OFF. Enabling and disabling of mobile data don't helps.
Which version of M4 you have? Thanks for "performance fix", I will try to find proper file to replace inside system/etc or you can share it?
Edit: I found correct file and replace it and now kernel governor is interactive , only problem with mobile data remain, hopefully @zacharias.maladroit will fix soon.
valyo_bg said:
@DavidMKD Its shows that mobile data is enabled, but there is no icon for 3g/LTE and every app report that phone is offline when WiFi is OFF. Enabling and disabling of mobile data don't helps.
Which version of M4 you have? Thanks for "performance fix", I will try to find proper file to replace inside system/etc or you can share it?
Edit: I found correct file and replace it and now kernel governor is interactive , only problem with mobile data remain, hopefully will get fix soon.
Click to expand...
Click to collapse
I think you are right about mobile data, it doesn't work here either
Thanks for your work
can you add low brightness mod please?
the original init.qcom.post_boot.sh file from E2333
https://www.mediafire.com/file/5mqc9n16fqwxan1/init.qcom.post_boot.rar
the original wlan.ko for SMK users
https://www.mediafire.com/file/4ejnzel0vacrji1/wlan.rar
@zacharias.maladroit could you please fix mobile data problem? Mobile data is shown "enabled", but all apps report that they are offline.
Okay, updated the OP / first post with clearer instructions to get into Recovery,
LOT of folks are trying to mess with M4 Aqua users by posting WRONG instructions on how to get into fastboot or TWRP/recovery.
I thought I was (or Sony) going crazy with those differing Button combinations from M4 Aqua and Xperia Z5 but it's THE SAME !
fastboot:
Volume DOWN + connecting USB
Click to expand...
Click to collapse
Recovery:
Volume DOWN + Power button , Power release on Sony screen
Click to expand...
Click to collapse
No wonder people (or new starters) are having such a hard time to use this phone and start development for it (with that non-clarity , confusion and frustration)
Mark.05 said:
Thanks for your work
can you add low brightness mod please?
the original init.qcom.post_boot.sh file from E2333
https://www.mediafire.com/file/5mqc9n16fqwxan1/init.qcom.post_boot.rar
the original wlan.ko for SMK users
https://www.mediafire.com/file/4ejnzel0vacrji1/wlan.rar
Click to expand...
Click to collapse
Oh - been wondering what to make of the high brightness
Can you please point me to the modifications needed for it ?
With what tool or process the ramdisk/initramfs can be packed up again ?
valyo_bg said:
@zacharias.maladroit could you please fix mobile data problem? Mobile data is shown "enabled", but all apps report that they are offline.
Click to expand...
Click to collapse
Consider it done (take a look at the kernel folder) [ https://drive.google.com/open?id=0BykGGWB96CBQUFhXbG5sRUZMMWM ]
The kernel is still experimental and more of a proof of concept:
The iddd (idd daemon - or close to that name) is crashing and force-closing continually (last time I checked),
thus I renamed and moved it to the internal storage so that the Android/init system deactivates it
Thanks to @dani020110 for pointing at the offending commit that would cause the crashing of the new kernel
Kernel source is at:
https://github.com/zachariasmaladroit/android_kernel_sony_msm8994_kitakami_r2/commits/Nautilus_I.1
@zacharias.maladroit I can't download from your link - message "not found, error 404" appear.
Edit: just download successfully from first page of this topic, as soon is tested will inform you about results, thank you.
Related
DISCONTINUED DUE TO LOWER PERFORAMNCE THAN LEGACY!!!
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What are Nightly builds? Auto compiled builds of the latest CyanogenMod source from github. This version change each night and aren't officialy supported. If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).
All bug reports that don't meet this conditions will be ignored:
You have the kernel provided in the zip file
You made a clean flash and didn't restore anything
You made a detailed review of the problem
You provide a logcat in a .txt file (Search internet)
You provide dmesg or last_kmsg if it is a kernel panic (Search internet)
EVERY AND ALL REPORTS OF BUGS WITHOUT LOGS WILL BE IGNORED. DO NOT POST WITHOUT LOGS BECAUSE NOTHING WILL BE SOLVED. THANKS. I CAN'T DO WITCHCRAFT.
What's working :
Booting
RIL and Mobile Data (Should work for Dual-Sim also) !!! SOMEONE CONFIRM
Storages (Internal and External)
Notification Led
Flashlight
Sound
Wi-Fi
Bluetooth
GPS
Tethering (BT, Wi-Fi, USB)
Sensors
Camera
Browser
Autoselecting your phone based on your MODEM partition
BATTERYLIFE SHOULD BE CRAAAAZYYYY
What's not working :
Video playback
Fm Radio
NFC (I never used it and it is a pain to separate from other versions other than P710)
Other things might be broken please report with logs
Instructions :
Reboot to recovery
Make a full wipe (/system, /data, /cache, /dalvik-cache)
Flash the CM11 zip
Flash Gapps (if you want)
Make factory reset
Reboot to system
Downloads :
ROM:
Older versions:
cm-11-20160222-UNOFFICIAL-vee7-RC1.zip
md5: abe9b3aaa42a3e8dd6f9bdd96bdb02c3
cm-11-20160222-UNOFFICIAL-vee7-RC2.zip
md5: 5dafd54589f603b43780bee5a5d134da
GAPPS:
pa_gapps-modular-nano-4.4.4-20150308-signed.zip
If you really appreciate my work on the L7 II series please consider getting me a coffee right now
Credits :
@Caio99BR
chil360
Y300 Team
TeamHackLg
CyanogenMod
Xda for this nice home
Donators (BIG THANKS!!!) :
XDA:DevDB Information
CM11 vee7 CAF, ROM for the LG Optimus L7 II
Contributors
neutrondev
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CM
Version Information
Status: Stable
Created 2016-02-22
Last Updated 2016-02-22
Reserved
Changelog :
22.02.2016 ---> Initial Release RC1
You have the bugs and what is working in the first post
24.02.2016 ---> RC2
overclocked cpu
added governors
added hardware monitoring for battery
probably fixed dual sim
Reserved
Wow! This so fast. hahaha!
I have P716 and I will flash then as soon as I download it.
'll test and post the feedback. If you need some test of roms for dual sim devices you can ask me.
Anyway thank's for your efforts for our device.
In P716 boot is run( although the boot in this is slightly slower than the other ROMs, but ok), so start the device,
sim card's are detecded, but when i try enable then, an error occurs and activation failed, and return to mesage "new sim card detected....", then I was not able to activate neither one sim card.
So, return to the welcome page and after choose the language, a bar run, and aking "just a sec...", after few minutes, setup wizard crashes "Unfortunately, Setup Wizard has stoped". Device does not start.
I was trying reboot for sometimes, but every time the same occurs.
I read and follow all instructions and flash this rom two times.
As the device does not start, I was unable to get Catlog. Sorry.
Edit:
Now I tried to flash without GAPPS and it worked.
But, Setup Wizard not loaded. it probably crash. Before the first boot go directly to the Home screen. All configuration, wifi, data, time, language, ... was done manually.
Too, simcard's faliled to activated. included by terminal. I will provide the logcat soon. I'm sleepy now. hehe
After, I reboot to recovery and flash GAPPS now it worked. When rebooted playstore app not works in first time, after new rebooted, playstore app works but was slowly for now all ok.
The rest all ok for now. too videoplayback is ok.
What is CAF? How is it different from normal and your previous cm11 build.
XDA-00 said:
What is CAF? How is it different from normal and your previous cm11 build.
Click to expand...
Click to collapse
First search result in google: https://www.reddit.com/r/Android/comments/1rt9md/eli5_what_is_caf_why_is_cm_going_caf_affects_the/
shhnedo said:
First search result in google: https://www.reddit.com/r/Android/comments/1rt9md/eli5_what_is_caf_why_is_cm_going_caf_affects_the/
Click to expand...
Click to collapse
So Qualcomm devices(like my p715) will have increased performance/battery life with custom roms having CAF. Right?
XDA-00 said:
So Qualcomm devices(like my p715) will have increased performance/battery life with custom roms having CAF. Right?
Click to expand...
Click to collapse
Something along those lines, yes.
Sorry i don't understand one thing, to flash this rom, and Also your cm12-13, i have to use twrp3 or can I use my old cwm, the old no-touch version? Sorry for my bad english
MustangBR said:
In P716 boot is run( although the boot in this is slightly slower than the other ROMs, but ok), so start the device,
sim card's are detecded, but when i try enable then, an error occurs and activation failed, and return to mesage "new sim card detected....", then I was not able to activate neither one sim card.
So, return to the welcome page and after choose the language, a bar run, and aking "just a sec...", after few minutes, setup wizard crashes "Unfortunately, Setup Wizard has stoped". Device does not start.
I was trying reboot for sometimes, but every time the same occurs.
I read and follow all instructions and flash this rom two times.
As the device does not start, I was unable to get Catlog. Sorry.
Edit:
Now I tried to flash without GAPPS and it worked.
But, Setup Wizard not loaded. it probably crash. Before the first boot go directly to the Home screen. All configuration, wifi, data, time, language, ... was done manually.
Too, simcard's faliled to activated. included by terminal. I will provide the logcat soon. I'm sleepy now. hehe
After, I reboot to recovery and flash GAPPS now it worked. When rebooted playstore app not works in first time, after new rebooted, playstore app works but was slowly for now all ok.
The rest all ok for now. too videoplayback is ok.
Click to expand...
Click to collapse
I need dmesg and logcat and logcat -b radio. we will fix it
@MustangBR
Flash this in recovery then tell me if it works.
https://www.androidfilehost.com/?fid=24421527759886035
shhnedo said:
Something along those lines, yes.
Click to expand...
Click to collapse
Great!
Its strange for me TWRP 3x recovery writes during installation about "unable to mount system on block 14 and data on block 20 device is busy".Nothing wrong,just strange.
First bug just on first start,setup wizard "unfortunatelly stopped" after lang selection,with or without SIM and all.Maybe reason is i am flashing not provided gApps pack but just micro[dont need lots of junk in /system]. Logcat named xD is in attached RAR.May be You will see what went wrong,sir.
Flashed without gApps,first start is working well=) .BTW if i install that micro gApps after first start,evth is fine.
Then,about camera.While focusing camera app crushes,the same was on Weritos CM with his videorecording fix.Logcat named camera attached[not filtered by error type and thats why too large,sorry].
Gonna test and look now,what else can I see.
Okay,turned developer settings ON,setted all animations to 0.5x,seems all works well on my 713.
And a question,will ART work better than Dalvik?
neutrondev said:
I need dmesg and logcat and logcat -b radio. we will fix it
@MustangBR
Flash this in recovery then tell me if it works.
https://www.androidfilehost.com/?fid=24421527759886035
Click to expand...
Click to collapse
Log are attached.
I was not able to download RIL_DS.zip, tried several mirror, but will not download.
I'll try to download more times, so get flash it I reply here.
Edit:
I was able to download now and flash it.
Remain the same any sim can not be activated. New log's below
MustangBR said:
Log are attached.
I was not able to download RIL_DS.zip, tried several mirror, but will not download.
I'll try to download more times, so get flash it I reply here.
Edit:
I was able to download now and flash it.
Remain the same any sim can not be activated. New log's below
Click to expand...
Click to collapse
I will look into it. It seems there are some issues .
@MustangBR add this line to build.prop and restart
ro.telephony.ril_class=LGEQualcommUiccRIL
Okay,played a bit with ROM.
First,smth is with lockscreen when music is played.Pictures sometime stuck,and even with player off it sometimes freezes a bit while unlocking.
Second,few times stuck on main screen with music played,one time phone even rebooted itself,other times i pulled battery.
Then,as in another CM builds,maximum volume is ABNORMAL high.
Also,sometimes battery indicates strange.I was goin home with 9%,then raised to 14% and now 20%.
Will try to catch error about freezes in music/locker soon,probably tomorrow will send an logcat.
ART works good=)
And my opinion:This will be the best ROM for vee7.Holds battery great,and works great[i changed launcher to Nova for myself to have biggest grid in menu]
And can i ask to add Smartass Governor to kernel?
DS_katauri said:
Okay,played a bit with ROM.
First,smth is with lockscreen when music is played.Pictures sometime stuck,and even with player off it sometimes freezes a bit while unlocking.
Second,few times stuck on main screen with music played,one time phone even rebooted itself,other times i pulled battery.
Then,as in another CM builds,maximum volume is ABNORMAL high.
Also,sometimes battery indicates strange.I was goin home with 9%,then raised to 14% and now 20%.
Will try to catch error about freezes in music/locker soon,probably tomorrow will send an logcat.
ART works good=)
And my opinion:This will be the best ROM for vee7.Holds battery great,and works great[i changed launcher to Nova for myself to have biggest grid in menu]
Click to expand...
Click to collapse
Will add governors and Hardware monitor of battery sure.
neutrondev said:
I will look into it. It seems there are some issues .
@MustangBR add this line to build.prop and restart
ro.telephony.ril_class=LGEQualcommUiccRIL
Click to expand...
Click to collapse
No way.
Now when to open dialer app this is crashes. The same occurs when trying to configure and activate simcard in configurations he crashes.
Also now show only one sim card symbol on the top bar of the screen, before this command appeared two.
I confirm all @DS_katauri has written. I noted the same things. + sometimes after pressing the power button to block screen and press it again to unblock screem takes several seconds with black screen until to show the screen.
GPS(included navigation mode), camera, wifi, sensors, usb, sound,video, browsers are fine, batterylife is unbelievable, very good.
Not a ROM bug,i forget to use some autostarts manager and disable sync=)
Seems ROM is stable,no reboots for night.Just damn gApps.
@MustangBR
Try the new version. Clean flash. Tell me if Dual Sim works.
@DS_katauri
Overclocked CPU and governors are there.
Also battery is monitored with kernel interface now.
Hello partners!!!
Here we share the functional rom last for our MaX2!
At the request of many colleagues, I created this CM13 based on 29 September.
And adding the entire S19 firmware to have it fully updated and upgraded.
Fully functional quick and steady myself I was surprised with the performance tests ... 143,000 AnTuTu with hot enough to test mobile Cold believe can draw record numbers ...
To say that I still have problems with slow motion ....
I'm starting to not know where mistakes can be ....
Libs I managed to trace the entire structure of the official EUI and still does not work ....
Permits revised from top to bottom ...
Libs mother and CM13 ... zilch ...
Perhaps there may be something in the kernel (boot) but there are limited ...
As I change anything to do directly test the ROM does not start or comes into infinite loops ....
So ... I leave the rom completely finished but with 2 bugs.
And each user knows what he wants or what you need.
But the ROM is fully functional for day to day and is really fast and stable.
BUGS:
1 Slowmotion nonfunctional. The rest of the camera is fully functional with 21mpxl.
2nd nonfunctional IRDA. (With this ... if not roms stocks moment ... little we can do ...)
The first!!!! IMPORTANT
We do not force anyone has use or install the rom.
We do not make yourself responsible for possible errors or brik the terminal.
We simply share our work for all so that we can have the terminal in our language.
RoM CM13
CM13 based official of the day 29/09/2016
s19 official firmware with all its libs + kernel.
Rom eliminated completely stock only apks that created conflict with our terminal.
Doze functional.
Sound perfect.
wiffi
BT
Integrated Pico gapps
Some improvements in the build.prop
Installation Method
We have created a zip FULL.
ROM contains firmware s19 + recovery + 5.8 everything necessary for you to come firmware do not have problems to come and stay all properly installed and running smoothly or silly scares.
* Download rom.
* Enter the zip rom on your terminal.
* Restart recovery.
* Since the recovery to the wipes.
* Once the wipes, select the zip and install.
* Once installation is complete, restart System.
* Wait for the rom you first start, it takes a few minutes not alarmed.
downloads TeaMSpaiN
CM13 ROM S19: https://mega.nz/#!SwIHSB7C!rFQJsQxx-J-RI121GWsaC6DAhDkLHzJdDPvdVabZRRY
Your comments on this rom.
And if you find any bug report to try to fix them.
Greetings comrades!
DONATE PAYPAL: https://www.paypal.me/ParasiteYgaseOso
thanks for sharing this
Sent from my Le X821 using XDA-Developers mobile app
Thank you! I will try this rom.
Changing action of the left hardware button doesnt work, it just keeps working as "menu" button.
ArctiX said:
Changing action of the left hardware button doesnt work, it just keeps working as "menu" button.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=68885350&postcount=235
meangreenie said:
http://forum.xda-developers.com/showpost.php?p=68885350&postcount=235
Click to expand...
Click to collapse
Thanks, that worked
Thanks for your work! Does Camera API 2 work this time?
I flashed this rom today. Everything works well for me!
wiped system and dirty flashed from previous cm13 and it seems to be running very well
Nice, smooth, we will see battery performance compared to Mokee.
- Camera2 api doesnt work
- Slowmotion doesnt work
- IR doesnt work
- For me, missing Aegis app from Mokee is a big step back
Sent from my Le X820 using Tapatalk
@ParasiTe_RemiX Did you build this from source or port from another device?
Beautiful ROM, but for me in Japan for some reason LTE is not working, I can get only HSPA. This is strange because in the stock eui I can use LTE no problem.
Also the hardware buttons light up when you touch the screen, on Eui they only lit up when you touched the buttons, not the screen.
Oh, and after checking now, the AudioFX doesn't work system wide, only in the cm music app, in e.g. YouTube or Tidal, it doesn't make any change in sound.
Notification light is blinking when charging, is there any way to make it always on and not blinking?
ArctiX said:
Also the hardware buttons light up when you touch the screen, on Eui they only lit up when you touched the buttons, not the screen.
Oh, and after checking now, the AudioFX doesn't work system wide, only in the cm music app, in e.g. YouTube or Tidal, it doesn't make any change in sound.
Notification light is blinking when charging, is there any way to make it always on and not blinking?
Click to expand...
Click to collapse
For the hardware buttons backlight, you can turn them off in settings/buttons or you can turn the brightness of them right down, via editing the max_brightness file.(can't remember the path name atm, but can easily google)
For the charging light, you can turn the charging light off in settings/display. The options for them don't seem to work unfortunately.
When I plugged my phone to the computer I noticed a blank file with no name and hard disk icon on my sd card, when I tried to delete it, it wiped my whole sd card! don't delete that file if you see it.
Hello, This ROM is also compatible with the version Le Max 2 Pro?
pickmod said:
Hello, This ROM is also compatible with the version Le Max 2 Pro?
Click to expand...
Click to collapse
No, you can't flash it for X620!
bahuy2003 said:
No, you can't flash it for X620!
Click to expand...
Click to collapse
I have Le Max 2 Pro X820... it is compatible?
Thank you, looks really production quality
This is extremely close to what I wanted from this device: Straighforward CM13 (ok, I'll want CM14 next), no bloat, functional and fast.
Also rooted, which means I control my device, not some vendor who wanted my money but fails to cede the control over what he sold.
And most importantly: No longer any of these Chinese apps, which refused to get uninstalled while they claimed about any privilege Android can provide.
I sure hope security patches will be coming for years as the device looks powerful enough to last a long time.
Only bug I've found so far is apps like Hangouts and Duo can't access the Camera for video calls. Apart from that, flawless so far.
EUI 6.1 FINAL
6.1.712S_FKXOSOP617120407S
This is a stable release of the EUI 6.
Maximally close to the firmware, without any extraneous services and applications.
The main thing in this build:
- SMS Messenger from LeEco. Now fully work.
- The Contacts application is cured of an editing error
- Removed Google's analogs (sms, music, calendar)
- Build white (white bootanimation and splash screen)
- A compromise is found between performance and overheating
- more Russian
This build is the final release.
Installation is simple:
- maximum possible cleaning
- Installation via TWRP
- Magisk is put automatically
Reboot and configure.
The firmware is optimized within an hour.
Download links:
EUI 6.1.712S FINAL
- final release
GoogleDrive
EUI 6.0.617S ST2
- more bugfixes
is no longer available
EUI 6.0.617S RC3 ST
is no longer available
P.S. Who has a problem with the focus of the camera, this build also does not have its solution.
In build only 3 full languages:
English, Russian, Chinese
Important!
This is a fully saved port from the x850.
All EUI functional are presented in the form in which he got from the test build!
Only Fixed some issue.
It's RU build as the basis.
Working All and working fine.
The information below is part of the story. It is no longer relevant when installing and using the final release.
advantages of our build:
- we do not steal other people's works
- do not castrate the original system
- no blue diode
- there is Vulkan API
- correct and logical operation of the processor
- do not add strange software
- and we know how to do better without stealing
- and many many others!
EUI 6.0.617T port from X850
Installation:
Download the zip(s)
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash ROM
Install Magisk (if you need)
Reboot
Attention!!!
After first install, please be patient!
When you see screen with Language choise, turn off screen and wait 3-5 min. After, you may to continue settings!
Otherwise, the device may reboot during the setup process.
In build only 3 full languages:
English, Russian, Chinese
Now LeEco servers didn't work, but you may skip enter in you Account during Setup Wizard.
In this build work FP and most functions EUI, but online LeEco services didn't work (may be now, may be forever).
Important warnings for use:
//Never turn on this function!//
Otherwise, you will receive a reboot of the device instead of an incoming call. (this bug from x850)
//This function didn't work too//
When you turn on nothing will not happen, but the battery consumption will increase slightly
//After any reboot, wait up to 2-3 minutes. This will help avoid rebooting again.//
Tips and Tricks in second post later
Download:
- is no longer available
Contributors:
prsapphire
Kirich_Kumchenko
and LeEco
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based On: EUI 6
Version Information
Status: Final
Created 2018-01-05
Last Updated 2018-07-13
Already normally did not eat and did not sleep more than a month. Would you like to support my work, it would be nice. :laugh:
Not needed!!!
* Dolby Atmos work only with Magisk
If you want it, install this module:
download
*In build including Vulkan API drivers
cool thanks for your work
Everything is working? Thanks!
F*** yeah I have tried Eui 6.0 on Le Max 2 and it's great. Excellent thanks I'll try this out.
K got past setup but rebooted like 6 times. Now I'm in system keeps rebooting randomly
allrockedout said:
K got past setup but rebooted like 6 times. Now I'm in system keeps rebooting randomly
Click to expand...
Click to collapse
Read first post, if you do how in recommendation, your problems did not occur
Attention!!!
After first install, please be patient!
When you see screen with Language choise, turn off screen and wait 3-5 min. After, you may to continue settings!
Otherwise, the device may reboot during the setup process.
Click to expand...
Click to collapse
prsapphire said:
Read first post, if you do how in recommendation, your problems did not occur
Click to expand...
Click to collapse
Yes I read it. I'm in system now will do more testing thanks
OK not rebooting anymore also dialed *#46350000#*#* and turned everything off. Pretty stable restoring some apps now. More testing
allrockedout said:
OK not rebooting anymore also dialed *#46350000#*#* and turned everything off. Pretty stable restoring some apps now. More testing
Click to expand...
Click to collapse
Not needed now! It's work correctly with CPU and LMK! ONLY Scene you may turn off.
Stability in system after one - two hours, then the first logs and update some sys app in background.
prsapphire said:
Not needed now! It's work correctly with CPU and LMK! ONLY Scene you may turn off.
Stability in system after one - two hours, then the first logs and update some sys app in background.
Click to expand...
Click to collapse
Camera, Focus, Sencors, batery gyroscop any info? what about tranlations? could you share untranslated eng files so comunity could help?
kihope12 said:
Camera, Focus, Sencors, batery gyroscop any info? what about tranlations? could you share untranslated eng files so comunity could help?
Click to expand...
Click to collapse
Read the post, all inside.
About other lng, I didn't plan added more.
prsapphire said:
Read the post, all inside.
About other lng, I didn't plan added more.
Click to expand...
Click to collapse
But i cant found any info about working non working things, only about FP
Does everything work on it ?
I will give a try and give you feedback.
3 dot in circle notification is back again. Any way to trick the system to show the correct icon of the app that sends the notification?
Rear Camera doesn't work, fingerprints works but slow, lag fixed, battery is bad, 50% to 5% in 4hours without turning screen on.
Anw thank devs very much.
does it lag like the previous eui 6 rom?
If you are on eui 6 alpha, you needn't wipe anything before rom installation
Devanshu Biswas said:
does it lag like the previous eui 6 rom?
Click to expand...
Click to collapse
Lag fixed
Everything is working?
roushankumarsharma said:
Everything is working?
Click to expand...
Click to collapse
Reading is the Secret instead of asking the same question multiple times. [email protected]
Disclaimers
- THIS IS FOR SNAPDRAGON G950U ONLY!
- I am not responsible if your phone gets bricked.
- This process WILL wipe your data (unavoidable).
- This ROM has only been tested by me on AT&T. I don't know how other carriers work so report bugs please.
Features
- 100% Battery life!
- Comes with just 6 apps installed (the rest can be installed from the Play Store).
- Camera2Api.
- 4K YouTube support.
- Launcher always in ram (faster home menu opening).
- Better ram management.
- Smoother UI.
- Fast performance.
- ART tweaks.
- Battery saving tweaks.
- Better JPEG quality.
- Better media playback.
- Multi-user (up to 30).
- Disabled SPCM (Auto App Killing Device).
- HEAVY debloat.
- Removed carrier bloat APKs.
- Replaced Camera with Google Camera.
- Replaced Phone with Google Dialer.
- Replaced SoundAlive with AOSP Equalizer.
- Replaced UI sounds with Pixel sounds.
- Replaced Roboto fonts with Pixel fonts.
- Replaced Samsung Emojis with 8.1 Oreo Emojis.
- Faster bootup.
- Bixby is mapped to Back.
- Bixby is remappable with any app (IE: All In One Gestures).
- Replaced Samsung Keyboard with AOSP LatinIME.
- Great idle battery life.
- Great Screen on-time battery life (around 5% an hour for Screen).
Features Lost
- Knox APKs means disablers like SABS, BK, and AdHell will not work.
- Samsung Camera is removed.
- Duel Messenger.
- EasyOneHand.
- Wifi Calling.
- VoLTE.
Key Combos
Recovery Mode: Bixby + Volume Up + Power.
Download Mode: Bixby + Volume Down + Power.
Install
- Download and extract the rom zip file linked.
- Download and extract Raymonf's modded odin.
- Plug in your device and boot into download mode.
- Flash the Oreo BL Install G950U.tar.
- Reboot back into download mode.
- Go to options and enable repartition and nand erase.
- Go to PIT and select the PIT file.
- Flash the AP_COMBO.tar.
- Reboot back into download mode.
- Flash the BL.tar and CP.tar WITHOUT nand erase.
- Reboot into recovery mode (not download mode).
- Allow it to loop at least once, and reboot into download mode.
- Flash CSC.tar.
- Allow the phone to automatically reboot to recovery mode (it will error, be patient).
- Format data (REQUIRED).
- Reboot.
Post Install
- Set default dialer app to Google Dialer.
- Disable Enhanced LTE services (VoLTE) (fixes missing some calls).
- Disable Wifi Calling.
- [OPTIONAL BUT RECOMMENDED] Full battery cycle (drain to 0 and charge to 100).
- Enjoy!
Downloads
G950U_SLICK_v1.0.zip
Raymonf's Modded Odin
Credits: Thanks to @mweinbach and @me2151 and @kdragon for dev help, debugging, flashing methods, and allowing me to test. [OG THREAD]
Great work, respect and thanks ? I assume this will trigger KNOX?
Wow this sounds pretty cool! Nice work!
Sent from my Galaxy S8 using XDA Labs
corwin_amber said:
Great work, respect and thanks I assume this will trigger KNOX?
Click to expand...
Click to collapse
Knox is gone, but the bootloader doesnt have a way to trigger it
This is a Google play edition rom reboot!. Nice
Very nice work!
Any plans for this on the G955U as well?
Can you give us the option to keep the Samsung camera?
hope we can install samsung camera apk .??
Does this cause safety net to fail?
Applesarekool said:
Does this cause safety net to fail?
Click to expand...
Click to collapse
Nope
chetan180 said:
hope we can install samsung camera apk .??
Click to expand...
Click to collapse
Haven't tried but it might. No guarantees
@tytydraco Awesome! Thank you!
Wondering why remove the voLTE, is it too hard to get it to work?
Forgot to set the dialer app as default. I'm a dummy. Folowed the directions exactly and used the CSC for my device, the original CSC is probably the same but I wanted to make sure.
Wifi-calling is still not working, which is kind of a bummer since I rely on it pretty heavily. Any ideas about that?
Enrico0815 said:
does it work on g950f?
Click to expand...
Click to collapse
The initial post clearly says snapdragon only
barisgg said:
Forgot to set the dialer app as default. I'm a dummy. Folowed the directions exactly and used the CSC for my device, the original CSC is probably the same but I wanted to make sure.
Wifi-calling is still not working, which is kind of a bummer since I rely on it pretty heavily. Any ideas about that?
Click to expand...
Click to collapse
I'll see if I can add it back. Sorry guys ;(
Custom boot screen or stock?
Magnusmarshall said:
Custom boot screen or stock?
Click to expand...
Click to collapse
Stock
tytydraco said:
I'll see if I can add it back. Sorry guys ;(
Click to expand...
Click to collapse
Ooo I'll definitely flash this if you can bring back volte
It seems this one likely locked into At&T.
Magnusmarshall said:
It seems this one likely locked into At&T.
Click to expand...
Click to collapse
Wouldn't the sim card automatically configure the phone to the carrier it's on?
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community
Requirements:
- oreo bootloader
- twrp 3.2.0+
- backup everything before install
- wipe data before upgrading from LineageOS 14.1 or stock rom
Install:
- Flash zip in TWRP
- Don't forget about gapps (arm64 8.1)
- Root not included. Flash magisk before first start.
Google apps should be installed via recovery immediately after installing ROM.
If you reboot into ROM before installing Google apps, you must factory reset and then install them, otherwise expect crashes.
Not working:
gps
bt audio
stuff, I haven't checked
I broke my tablet. There are no more updates here further.
Download:
T820: https://drive.google.com/open?id=1ql4VIjTsSHNwzsoJm3Yb8wt0RW9OJerE
Device initial config sources:
https://github.com/bonuzzz
I was about to sell tablet...and get pixil c. Tablet is extremely laggy on stock Oreo. Switched back to your lineage 14.1 build which runs well but realized it was no longer supported. Very happy with your work! Thanks!
I'll give it a go when I get home. Thanks for supporting our device!
I did switch off WiFi upon initial setup, didn't seem to be liking 5g. After setup I switched to 5g WiFi but it kept showing no internet. My other devices don't have this problem. Not a big deal, just giving a heads up. I switched to 2g WiFi and all is well. Wayyyy smoother than stock Oreo. Didn't test gps, I know you said it wasn't working. I don't use GPS on my tablet so no loss there. Thanks again!
For gapps it shows "arm 8.1" it should be "arm64 8.1"
Edit: 5g seems to be working fine after a resetting WiFi, mobile & Bluetooth. Still can't seem to get audio playing through Bluetooth even though it's connected.
Cool! I will be installing this shortly. I was going to switch the the tweaked stock Oreo but will much rather use Lineage since I prefer more of a "vanilla Android" over Samsung's version.
P.S. I recently got myself a pixelbook for chromeos+android+linux and I find myself using that way more than my tab s3. If you need anyone to test something that doesn't really care about stability, let me know!
Edit:
Just wanted to let people know of what I've initially noticed and tested.
* Not laggy like stock is
* Able to format sd card for internal storage
* Official Keyboard case works (didn't use much before)
- show/hide key for virtual keyboard and Lang key don't do anything (at least it appears that way)
- Left 'alt' brings up emoji, right 'alt' brings up symbols on virtual keyboard.
* Auto wake/sleep works with 3rd party case (assume all work since it's just a magnet)
* Auto brightness works but I tested it with a flash light.
I liked the 14.1 version and I seem to like this version as well. It is to early to say more, but why can't you share this with lineage? It would be a dream, if this would be official and we would recieve updates. And maybe they will help you with the missing GPS?
Thanks so much for this. I've been wanting to get an Oreo ROM like this for my S3
EDIT: Is there any chance you could just give a dump of your terminal session of the build? I had started to try & build 15.1 for the S3 WiFi, based on your work for the LTE version, but wasn't having any luck. I'm hoping that if you could provide a terminal dump, it could help me work through my issues to get the build working as well. Would appreciate it =]
Regardless, thanks for taking the time to build this for us WiFi owners! =D
Finally, T820! Have been waiting for this for months now. Gonna give this ROM a try ASAP :laugh:
Thank you so much for this! Testing this weekend.
PuDLeZ said:
Just wanted to let people know of what I've initially noticed and tested.
* Not laggy like stock is
* Able to format sd card for internal storage
* Official Keyboard case works (didn't use much before)
- show/hide key for virtual keyboard and Lang key don't do anything (at least it appears that way)
- Left 'alt' brings up emoji, right 'alt' brings up symbols on virtual keyboard.
* Auto wake/sleep works with 3rd party case (assume all work since it's just a magnet)
* Auto brightness works but I tested it with a flash light.
Click to expand...
Click to collapse
Did you test the spen by any chance?
VVombat said:
Thank you so much for this! Testing this weekend.
Did you test the spen by any chance?
Click to expand...
Click to collapse
I didn't have software installed that I could use it in but I did put it to the home screen and got the circle indicator of where the tip is so it registers. Of course, there was no Samsung menu... Anything specific you want me to try this evening?
PuDLeZ said:
I didn't have software installed that I could use it in but I did put it to the home screen and got the circle indicator of where the tip is so it registers. Of course, there was no Samsung menu... Anything specific you want me to try this evening?
Click to expand...
Click to collapse
Mhm I'm using mainly Squid and Xodo to annotate and notate stuff. If you have them laying around anyways that would be nice, but if not no need to install and waste your time if I'll install tomorrow anyways. Thank you for your answer!
lineage-15.1-20180614-UNOFFICIAL-gts3lwifi doesn't work for me, bootloops, tried almost everything, etc.
RESOLVED: See below how and why.
Good afternoon. Everything works fine, the stylus in all orientations, the AnTuTu test runs fine and there is no understating of indicators on both stock, Wi-Fi is excellent, both 2.4 GHz and 5 GHz.
There are only 2 inconveniences
- Stereo sound from speakers is only in portrait orientation, and landscape channels do not change. Can you make a patch or fix yourself, you can not even change the channels when you turn, but only make a stereo Sound in landscape orientation (videos and movies often look into it);
- No sound goes to the Bluetooth headphones.
In any case, the firmware is super, thank you very much for the work done.
Hello, how to get Bluetooth working? I connect but no sound
Thank you also
Another problem, the sound slows down and stutters in applications (heavy or simple games)
JWnSC said:
For gapps it shows "arm 8.1" it should be "arm64 8.1"
Edit: 5g seems to be working fine after a resetting WiFi, mobile & Bluetooth. Still can't seem to get audio playing through Bluetooth even though it's connected.
Click to expand...
Click to collapse
edited, thanks
yes, bt audio doesn't work. seems I broke it in last moment...
PuDLeZ said:
Just wanted to let people know of what I've initially noticed and tested.
* Not laggy like stock is
* Able to format sd card for internal storage
* Official Keyboard case works (didn't use much before)
- show/hide key for virtual keyboard and Lang key don't do anything (at least it appears that way)
- Left 'alt' brings up emoji, right 'alt' brings up symbols on virtual keyboard.
* Auto wake/sleep works with 3rd party case (assume all work since it's just a magnet)
* Auto brightness works but I tested it with a flash light.
Click to expand...
Click to collapse
I have official keyboard case too. Unfortunately it's almost unusable in aosp if you need more than one keylayout. What about special keys, aosp doesn't have that triggers what stock rom has. I only could advice 3rd party app, but paid https://forum.xda-developers.com/showthread.php?t=1541916
HardWorker79 said:
I liked the 14.1 version and I seem to like this version as well. It is to early to say more, but why can't you share this with lineage? It would be a dream, if this would be official and we would recieve updates. And maybe they will help you with the missing GPS?
Click to expand...
Click to collapse
Nothing will change with official status except It would create more troubles and bureaucracy there.
Nobody will help. Believe me.
Comses said:
Good afternoon. Everything works fine, the stylus in all orientations, the AnTuTu test runs fine and there is no understating of indicators on both stock, Wi-Fi is excellent, both 2.4 GHz and 5 GHz.
There are only 2 inconveniences
- Stereo sound from speakers is only in portrait orientation, and landscape channels do not change. Can you make a patch or fix yourself, you can not even change the channels when you turn, but only make a stereo Sound in landscape orientation (videos and movies often look into it);
- No sound goes to the Bluetooth headphones.
In any case, the firmware is super, thank you very much for the work done.
Click to expand...
Click to collapse
I have an issue somewhere in audio behavior. Will check it deeper.
Comses said:
Another problem, the sound slows down and stutters in applications (heavy or simple games)
Click to expand...
Click to collapse
in games only? I've not noticed anything in videos.
samsuffit said:
Doesn't work for me.
What I did from Lineage 14.1:
- Upgraded TWRP to v3.2.1.1
- Wiped eveything
- Downloaded BRE2 firmware for my country
- Extracted BL....tar.md5 and flashed it with Odin v3.13.1
- Rebooted in recovery mode to be sure of... still don't know what
- Flashed Lineage 15.1
Then I could see the logo animation until the end, just before the system starts, then 3 boot loops and it went to recovery mode
I repeated the exact same sequence and flashed SuperSU v2.82-SR5, same result.
So...:
- Wipe everything
- Flash BL, CSC and CSC_HOME (no need of AP, system partition) with Odin
- Format/Erase Data
- Flash Lineage 15.1
Again a boot loop, this time without going back automaticaly to recovery mode.
Tried with SuperSU, boot loop...
So... This time I flashed eveything, reboot with Samsung Android, test a little bit, then:
- Flash TWRP v3.2.1.1
- Immediatly reboot to recovery mode
- Format/Erase Data
- Wipe everything
- Flash Lineage 15.1
Boot loop...
Tried with SuperSU, boot loop...
I was able to restore a full backup of my previous Lineage 14.1 installation.
What did I do wrong and which kind of logs do you need to help me to understand?
Thank you and thank you to have integrated S-Pen support, I love this thing. I don't realy need GPS.
Edit: in case it was mandatory I tried with Magisk v16.0 and v16.4 instead of SuperSU. Same boot loop.
If it's because I didn't flash the GAPPS, well... nevermind... I'll wait for something else.
Click to expand...
Click to collapse
Magisk is needed for device certification in Play store. That's because it should be flashed with gapps before first boot. So, rom works without gapps and root well.
For what region you downloaded oreo stock rom? I doubt but maybe samsung has different logic in bootloader for relocatable kernel stuff. It's strange how you restored lineage nougat, because that kernel shouldn't work with oreo bootloader.
edit: i'm wrong about bootloader and nougat, because I use now old twrp with nougat kernel.
Flashed old build. Have audio in bt, but don't have speaker rotation. I was sure it worked before...
If someone used or uses lineageos 14.1, is speaker rotation work there or not?
Hello @bonuzzz, thank you for the reply.
I was able to restore my Lineage 14.1 because I flashed the ARA2 boot loader (tried with Odin the first time, then with my TWRP backup, same result)
bonuzzz said:
If someone used or uses lineageos 14.1, is speaker rotation work there or not?
Click to expand...
Click to collapse
Only with VLC. Stuck in portrait mode with stock player. I don't have any games...
The last thing I need to try is installing the GAPPS... Like I said, I don't want to, so if the problem comes from this, I'll pass. But I have to try to be sure...
In this order from TWRP:
- Flash BRE2 boot loader
- Format Data and wipe everything
- Flash Lineage 15.1
- Flash openGAPPS nano arm64 8.1
- Flash Magisk 16.4
And... It's working...
Well...
I want to cry...
So the GAPPS are mandatory.
Thank you for creating a new os for sm-t820.
BT audio is working for me with Sony mdr zx220bt headphones