Hi,
I installed AEX 4.4 rom, everything worked fine but charging was very slow, 1% in 15 min or so, that to stopped, I installed BS kernel, charging didn't work, then tried pure nexus kernel, didnt work.
reinstalled AEX 4.4 after clean wipe, same issue, now my phone's battery is completely depleted, it doesnt even charge while turned off, any other way to charge the phone?
It might be a faulty usb cable, as many other users already reported. Try using a cable different from the one that came with the phone and tell us if it works
Related
Hi,
Installed the latest SuperNexus 2.0 rom on my S3.
Have this weird issue when charging from really low (0-20%). I leave it charging overnight. Wake up and it's stuck at 60%~
It won't go any higher. I'll need to reconnect the charger in order for it to resume charging to 100%.
Any ideas?
Factory reset.
Reflash rom
Is that really the solution?
It's a clean installation. No app restores or anything like that. =/
I remember it happening in the past with older SuperNexus as well as CM 4.1.2 if I recall correctly.
Not quite sure what has happened to my One X+ so I'm hoping someone over here can help me.
I plugged in the charger today and for some reason my phone wasn't recognizing it at all, and carried on discharging.
I have been using the latest stable CM 10.2 (cm-10.2.0-enrc2b) for the past few days and everything has been working fine.
I tried several things to try and fix the issue, including a hard reset, a factory reset of the software and also flashing the latest CM 10.2 nightly (cm-10.2-20131209-NIGHTLY-enrc2b).
I have also tried a few different cables, and also charging from AC and my laptop.
Nothing so far has worked, so right now the phone is powered down but only has around 16% battery left.
Any other suggestions on what I could do to try and fix the issue?
I'm no longer under warranty so wanted to explore any other options before getting the hardware checked out.
Cronnie said:
Not quite sure what has happened to my One X+ so I'm hoping someone over here can help me.
I plugged in the charger today and for some reason my phone wasn't recognizing it at all, and carried on discharging.
I have been using the latest stable CM 10.2 (cm-10.2.0-enrc2b) for the past few days and everything has been working fine.
I tried several things to try and fix the issue, including a hard reset, a factory reset of the software and also flashing the latest CM 10.2 nightly (cm-10.2-20131209-NIGHTLY-enrc2b).
I have also tried a few different cables, and also charging from AC and my laptop.
Nothing so far has worked, so right now the phone is powered down but only has around 16% battery left.
Any other suggestions on what I could do to try and fix the issue?
I'm no longer under warranty so wanted to explore any other options before getting the hardware checked out.
Click to expand...
Click to collapse
I've been having similar issues with my HOX+, though mine usually knows when the charger is attached. Try turning it off and letting it charge overnight. I kept doing that till it eventually fully charged last time and started holding charge again.
A very similar thing happened with my wife's HOX+ , Kept it on charge overnight,turning off the phone .It works just fine now.. So what were you doing before the phone stopped charging ? And did it start charging back.
I have never had this issue before so i'm coming for some help as i'm guessing it's something to do with CM. Last night i flashed cm-10.1.3-quincyatt with no problems at all. Everything was working flawlessly. Once i got my phone fully charged and most of my apps setup ect. I did a battery calibration, then used a drainer app to drain the battery completely as normal. plugged the charger back in and it charged to about 75-80% i picked my phone up a bit later to check messages and noticed it was not charging. I unplugged and replugged the charger cord with no success in getting the phone to charge. I've tried numerous cords, usb cables ect. Nothing will charge. It won't even recognize the phone when plugged in usb on the computer. the battery charges fine with an external charger, but obviously i cannot use the phone while the battery is out on an external charging unit. I know someone is probably going to suggest the charging port went bad...i highly doubt that because it was just replaced not a week ago. also, any time i've had a charging port go out, nothing will work in the port, not even a dongle jig. I powered the phone down and inserted my dongle jig to test and make sure, and sure enough, the second the dongle jig is inserted the phone powers on and boots into download mode as it should. I've reset dalvik ect. tried everything i can think of besides wiping and reflashing, as i'm trying to avoid that since i have about 4 hours or so in setting up custom settings/apps ect. on the phone lol. I've noticed browsing the web i'm not the only person experiencing this issue, so can someone please help me in fixing it asap? Thanks in advance for the help, and if a thread was already posted on how to fix this, please direct me to it, because i could not find it.
[Update]
I have wiped and reflashed just to test and see if that would fix the issue, sadly it still will NOT charge.
Is anyone else experiencing this on LP roms?
I'm currently on 5.1.1 and if I unplug from the charger, the LED stays on and the battery percentage icon continues spinning as if it is charging.
When this happens, the battery drains abnormally quickly unless I reboot to get rid of it.
It also stops it from charging if I plug it back on the charger.
Extremely annoying, I might try reverting to an older 5.0 ROM and see if it still has the problem, maybe it's my device and not the ROM but would love to know if anyone else has come across this problem...?
obviously you're on a custom rom since the Z2 doesn't have 5.1.1 yet, so which one ?
I've recently tried multiple 5.1 roms, but never had this issue, but maybe it came up in newer builds, not sure.
You could try using other 5.1.1 rom to see if you still have the same issue. If it doesn't then you can inform the developer of your rom
thanks people's
Yes, a custom rom, I tried several other new roms and they are all exhibiting this problem for me.
I also tried reverting to a previous backup of a different 5.0.1 ROM and the problem still exists, and I'm sure the problem wasn't in that ROM when I originally used it so maybe it's coming from somewhere else.
I might try reverting to a stock rom and see what happens
behelit said:
thanks people's
Yes, a custom rom, I tried several other new roms and they are all exhibiting this problem for me.
I also tried reverting to a previous backup of a different 5.0.1 ROM and the problem still exists, and I'm sure the problem wasn't in that ROM when I originally used it so maybe it's coming from somewhere else.
I might try reverting to a stock rom and see what happens
Click to expand...
Click to collapse
Repair with PC companion or flashtool with stock ftf
I have this LED problem even on my stock phone 4.4.4 and 5.0.2. haven't noticed battery drain
I think i have narrowed it down to a bad usb cable(s) not supplying enough power to charge the phone. I have replicated this many times
I don't think it's the cable, I've tried multiples and it will charge fine using the magnetic adapter, I can also access the device files without a problem (MTP/ADB).
I've flashed the latest stock ftf (specifically D6503_23.1.A.0.726_UK+Generic.ftf) and it now shows the newer charging screen when the phone is off and plugged in, but it still has the same problem. Even when powered off it doesn't charge properly, the percentage just goes down even though the LED is on and the screen says charging. If I unplug the usb cable the light stays on and it still indicates as charging and drains abnormally.
Thought I should also mention, no matter what ROM I use (stock/custom) the auto-rotate behaves weirdly and the screen will auto rotate even when the setting is off.
Edit:
If anyone else if having this problem, it is most likely due to the magnetic charger damaging the board:
http://forum.xda-developers.com/xperia-z2/help/usb-charging-data-connection-t2845629/page2?nocache=1
Hopefully this is covered by warranty
Hi there I need you help if you answer please reply. I am unable to fast charge my phone since I have flashed a custom ROM on my device (Redmi Note 5 pro) normal charger works but the fast charger do not works. Let me explain
So I was using MiUi 10 on my device but it became crappy after the latest update so I wanted a change and then my bootloader was already unblocked so I went ahead and flashed Resurrection Remix 7.0.2 it was a nice ROM but the problem was the I want able to turn camera 2api on even though tried every method and Also had one more problem that I wasn't able to charge my phone with any charger only way I can charge was by connecting it to my laptop....later I found a crack that if you plug charger and Quick turn on Screen saver from Display settings it charger till the screen saver is ON.... But since I wasn't able to use GCam I decided to install any other ROM then I heard about Syberia OS.... due to the Support of Camera2api and Battery life with performance I went ahead and Flashed it using as always TWRP ......now in this ROM everything works with custom kernels I am achieving more than 8-9 hours of Screen on time which includes some heavy usage... like 3+ hrs of PUBG... All other stuff..
But Only problem is that Now even the screen Saver trick do not work .....but Normal Charger works fine no problem at all works great! But the fast charger it doesn't work like I plug in the charger and then it shows and after 2-3 secs it goes off ....now until you plug the cable off the phone's port it won't work.....after pulling the cable off and reinserting it into the port will make it work for 2-3 secs but then it goes off.....Please help if you know how to.fix this