Hi, I have a Lenovo A319 that suddenly when using it , it shut itself down, It happened before but this time when I tried opening it, it stuck on a BootLoop.
After couple of hours I got into the Recovery Mode and rebooted it from there and actually worked.
but today the same thing happened but rebooting from recovery mode didn't solve.
and (in Recovery Mode) when I choose "System Partition Check" it sayed " FAILED" and the last line said " System have been Root!"
though I'm pretty sure I didn't Root it.
I even Hard Reseted it but it didn't work.
What should I do??
Related
I am facing problems with Sero 7. The problem started about two weeks ago when the battery died and the tablet turned off. After charging and booted the table I received a message "Encryption Unsuccessful". At that time tablet was running xboxexpert's SERO ROM. After pressing "reset tablet" (some forums say a big mistake), Nothing happened. The error was still there.
After that tried installing all the ROMs available by xboxexpert, randomblame (new 4.4R6 too) and stock also. Even updated the Recovery originally CWM and now TWRP. But with all the ROMs I am either stuck at the Hisense or Andriod screen or the tablet reboots continuously.
I have tried to wipe everything but still it gets stuck at the Hisense screen or reboots continuously. Even sometimes stuck at blank screen.
If required, Is there anyway to install everything from scratch including boot and recovery.
dogood1 said:
I am facing problems with Sero 7. The problem started about two weeks ago when the battery died and the tablet turned off. After charging and booted the table I received a message "Encryption Unsuccessful". At that time tablet was running xboxexpert's SERO ROM. After pressing "reset tablet" (some forums say a big mistake), Nothing happened. The error was still there.
After that tried installing all the ROMs available by xboxexpert, randomblame (new 4.4R6 too) and stock also. Even updated the Recovery originally CWM and now TWRP. But with all the ROMs I am either stuck at the Hisense or Andriod screen or the tablet reboots continuously.
I have tried to wipe everything but still it gets stuck at the Hisense screen or reboots continuously. Even sometimes stuck at blank screen.
If required, Is there anyway to install everything from scratch including boot and recovery.
Click to expand...
Click to collapse
Any clue.
so it goes like this .. I had a problem with my z90a40 as I was trying to fix a problem with network services(phone was able to recognize the sim but there was no service).. first I did a factory reset- didn't work, then I entered the boot menu again and wiped user data, then I choose "restore QCN backup" option , after that I rebooted, phone entered this initializing statues and after 2 seconds it rebooted(doesn't even finish the initializing, actually it only ticks at maybe less than 5% and then reboot) , and kept doing that, after this, I could no longer enter the boot menu ... I tried everything, ADB or cwm recovery won't work cause my device is not rooted nor the usb debugging is on .. so am stuck with this "initializing loop".. flashing didn't solve it for me, I tried every ROM I could find, rooted or not .. nothing .. what should I do now ?
thanks in advance & sorry for bad English
same problem
axiom913 said:
so it goes like this .. I had a problem with my z90a40 as I was trying to fix a problem with network services(phone was able to recognize the sim but there was no service).. first I did a factory reset- didn't work, then I entered the boot menu again and wiped user data, then I choose "restore QCN backup" option , after that I rebooted, phone entered this initializing statues and after 2 seconds it rebooted(doesn't even finish the initializing, actually it only ticks at maybe less than 5% and then reboot) , and kept doing that, after this, I could no longer enter the boot menu ... I tried everything, ADB or cwm recovery won't work cause my device is not rooted nor the usb debugging is on .. so am stuck with this "initializing loop".. flashing didn't solve it for me, I tried every ROM I could find, rooted or not .. nothing .. what should I do now ?
thanks in advance & sorry for bad English
Click to expand...
Click to collapse
1st was the network data, tried reset and then CQN restore on black menu. now just keep on rebooting with lenovo logo initializing at 2-5% then loop restart again...
now cannot access the black menu (vol down + power)
stuck on rebooting phone any fix?
Hello. I have a problem with my phone. I forgot to delete root and decided to click the wireless update provided in the phones settings. While rebooting in this process the phone has become stuck on the 'no command' screen and then times out and repeats in a loop. I have managed to enter the recovery stage and try several of the options on this screen but with no success.
Something very much the same just happend to my HT17 Pro with non-rooted stock ROM and regular suggested update. It is stuck in on and off "HOMTOM" logo and trying to boot into recovery end in "no command"...
just pres power + vol up one time. worked for me!
Hey there, I'm currently possesed a THL 2015, chiense phone, with firmare kitkat 4.4.4, Rooted.
Ok, today i was trying to change my Bootanimation (which i've changed several times already), but i've encountred a huge problem.
My phone has stucked on On/Off loops at the first time after i've changed the bootanimation...
Well i've tried to enter Recovery Mode.. but.. hmm.. how should i put it... My phone got stuck on it aswell..
My phone is looping in Recovery mode (i know that because there is the logo with the "No command thing"),
The device is turning off, then back on every 7~15 seconds after enerting automaticly into Recovery mode..
I've tried every single key pressing on the On/off key and Volume keys.. but in failure.. the Recovery mode won't goes out, and the device still loops.
Okay... now What i've tried also.
I've tried to connect my device into my computer trying to getting a shell trough ADB. but in failure, cause of the device loops in Recovery Mode, adb and the computer won't recongnizing my device.
Ok.. Flashing?
So i've tried to download SP_Flash_tool for flashing into stocked downloaded rom, but also in failure, non of the roms i've downloaded for my Device were recognized in the SP flash tool, (the scatter).
I've downloaded it from several sites in them were this site: needrom/com/download/thl-2015.
Tried every rom, still not recognizing.
Well i've failured in everything i've tried, so im here asking for help.
My main goal is getting a shell for my device, for me deleting the bootanimation i've tried to install.
ok.. i've talked too much..
Thank's for helping.
I restarted my phone (huawei mate 10 lite) because it was lagging, and suddenly I get greeted with a screen that says "system install failed" and a "reboot system now" button, but clicking it restarts the phone and gets me into the same screen again, I somehow managed to get the phone to safe mode but restarted it again (I thought that restarting from safe mode might fix my issue) but now I can't manage to boot it into safe mode again, and I'm stuck in this loophole, can anybody help me fix this without losing my data, and thanks!