Hi guys and thanks in advance for the advice.
I'm new to the forum and new to flashing roms
My mobile :- DOOGEE VOYAGER2 DG310
Flash Tool :- SP flash tool MT6582
Kernel :- 3.4.5
I tried to install TWRP with SP flash tool by just flashing the RECOVERY
which didn't go well, so found the stock rom and re flashed only the RECOVERY
now booting again
(solved this part) I needed to correct Kernel version of TWRP mine is 3.4.5 needed 3.4.67 kernel
the 3.10.54+ kernel version did not work just hung when trying to load recovery.
Anyway my system backup I made with TWRP recovered OK but still no service ?
-------------------------------------------------------
The problem i've got with my phone
I flashed Doogee Voyage2 DG310 Android 5.0 using SP_Flash_Tool
all working apart from connected to O2 mobile.o2.co.uk 3G all services grayed out.
getting mobile network not available
Tried all the help on google for mobile network not available still the same.
So flashed back to Stock ROM Android 4.4.2
still the same.
thought must be my SIM Card but working on my old phone so formatted
[whole flash except Bootloader]
then re-flashed :-
STOCK 4.4.2 / STOCK 5.0 / Resurrection Remix / Lineage Os R79 rom
all with the same result, Connected to O2 3G all services grayed out.
also tried both SIM slots same.
There's something I'm missing here ?
Is there a way to reinstall/flash the mobile service providers GSM files ?
don't get it if I clear the phone then re-flash surly I would get all I need ?
Related
my baseband version is showing unknown which means tht my phonw presently has no imei num ,wifi mac address ....
i tried all the methods posted on xda website to write the imei num but failed....
User "Kamal882" suggested that i should flash it with the official firmware ...plz give a link to the official firmware or do suggest me with any other methods to solve this...
PLZ Help...
I also tried flashing with the stockROM uploaded in this web site but it dint work ..Im thinking it didnt work coz tht stockROM is flashed through clockwork mode n it doesnt support sp flash tool..
i am facing the same issue, did you get solution?
I was using CWM 6.0.1.5, then i have decided to switch to TWRP, some idiot posted wrong recovery.img of TWRP 2.5.0.0
I have installed the TWRP recovery using my PC, and then when the phone rebooted I lost my dual sim networks.
getting Invalid IMEI for both the SIM's, Unknown baseband.
SIM's are only working with STOCK ROM, If i try to flash any other custom ROM SIM's are not working.
Please help.
Hello!
I had problems with my lenovo s820 network signal so I tried to flash different roms. My phone is CN version, I downloaded firstly older rom, but network coverage was bad again so I flashed kitkat from needrom.
It was working fine but problems with network still persisted so I tried to flash the backup of the rom that came with the phone. It was working before, but now I am stuck in animation logo and phone stays there, no restart no nothing.
I downloaded the rom through SP Flashtools Download (DA DL Checksums).
Little help will be much appreciated. Thank you!
The original rom that came with the phone was 1.0 1427 ( I think). I made a full backup of it through sp flash tools and after that droid tools (like the guide here in the forum). After that I flashed vibe 2.0 latest from needrom (I flashed it through CWM and it worked great). Since I couldn't root it I tried to flash back my older rom (that came with the phone). I did it with 3.13 with DA DL Checksums. After that when it didnt work I tried same with latest flashtools (5.13).
Someone suggested that I make factory/data reset and wipe cache but problem is I have no recovery on the phone (it enters factory mode). WHen I try to flash recovery with the scatter inside the recovery it says error 8038 (also for another roms). Do you think this is the solution of the problem and is it possible that I use the scatter file from my backup of the initial rom (untick all except recovery) and select the recovery image to install?).
I am afraid that I replace something and make things even wors.
Edit: The backup is working since I already did 2 flashes from it before.
Best Wishes!
Hi,
I have already backup my stock rom using TWRP before flashing custom roms from this forum, after that, I use restore in TWRP to back to stock
After reboot, I was asked as if my tablet is fleshy started, then MOBILE PHONE & DATA is broken...
Here are my P7500 P4 (3G) symptoms :
1) Settings->About device->Status: MDM UNKNOWN...
2) SIM seems partially working, radio signal okay, Carrier detected, about my phone no. is not working... & there is no apps to dial out...
3) All my PHONE-related APKs disappear, I already checked Setting->Application, Phone is not running at all
Plz. help me... I did not play with the mdm partition at all, I swear...
Did you restore your backup with the same TWRP version ?
I believe you have no other option than to flash a new fresh stock Rom from Odin.
But I could not download any stock firmware from sammobile...
I registered as a free member and logged in, but in the firmware section, was automatically logout... ...
Hi,
My Sprint Note 3phone is currently using a Kitkat ROM and TWR recovery. I tried some Lollipop ROMS. After flash the ROM, the phone boot to the page of Android setting, then the UI crashed and the phone reboot, showing Modem error.
Anyone has similar experience or have any idea why this happen? Thanks a lot.
quantlego said:
Hi,
My Sprint Note 3phone is currently using a Kitkat ROM and TWR recovery. I tried some Lollipop ROMS. After flash the ROM, the phone boot to the page of Android setting, then the UI crashed and the phone reboot, showing Modem error.
Anyone has similar experience or have any idea why this happen? Thanks a lot.
Click to expand...
Click to collapse
Hey bud first can you get into download mode ? If so great, now back up all your ( music, video, pics ) to the desktop of your PC or sd card. Download a fresh copy of Lollipop 5.1.1 to the desktop of your PC. Boot into download mode and odin flash the stock lollipop 5.1.1 OS the modem comes with it. Then root it and odin flash a TWRP recovery version compatible with lollipop. Now make a back up of your rooted lollipop OS, OK now your ready to flash lollipop ROMS !!!
For more info click on rom flashing basics in my signature.
Dear friends i was facing some problems with my karbonn titanium s29 elite so i flashed stock ROM using sp flash tools, even after successfully flashing phone is stuck at boot logo, I'm able to enter in recovery mode so i wiped cache partition and user data but it didn't work. i tried firmware upgrade + download and format + download in sp flash tools, successfully flashed stock ROM using both method but problem is same. i downloaded ROM from different sources to make it sure that it is not a ROM fault. Now my only hope is XDA so please help me and give me your precious time and knowledge to save my device. it is a mediatek mt6582 device.