WiFi "NVRAM WARNING: ERR 0x10" Problem Fixed
The reasons for the appearance of this error
1- Write Firmware After Select in SP FLASH TOOL to Format All + Download
2- After Root + Insert Nvram File for another Model
3- After Upgrade System by OTA Upgrade
Fix the error problem
1- Download MTK ALL USB Driver 1.0.4 -1.0.8
2- Download SN Writer Tool v1.1728
3- Download AP_BP_Base
4- Extracted Files
5- Install Drivers
6- Open SN Write Tool Folder and Double Click to SN Writer.exe
7- Select in Interface Program
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
8- Click "System Config" and select Choose
9- Click "Start" and Writing IMEI1 / IMEI2 / Wifi Address
10- Processing
11- Finish
========================= Notes: =========================
1- If you do not find the modem file, just watch the following video:
2- After and Before Processing:
========================================================
i dont have IMEI 1 and IMEI 2
what to do if you dont have IMEI 1 and IMEI 2 , when i searched in my phone i found IMEI UNKOWN ?
Amrati23 said:
what to do if you dont have IMEI 1 and IMEI 2 , when i searched in my phone i found IMEI UNKOWN ?
Click to expand...
Click to collapse
you can download in the google playstore the app System info for Android.. open the app and go to System -telephony and their it has to be..
DiaboliCall
other solution for fixing invalid imei on infinix note 3 pro ?
hi master i am having always the same msg (entering meta mode failed ) but i am in meta mode and its affiched in little letters in the downscreen, so what is the solution, i tried more versions of imei writer and always the same msg ???
Know IMEI Original Code
Amrati23 said:
what to do if you dont have IMEI 1 and IMEI 2 , when i searched in my phone i found IMEI UNKOWN ?
Click to expand...
Click to collapse
In your phone there you can find your imei number after removing your battery or back cover. If your phone comes with a fix battery and cover then you can find those number from your mobile box that give you with phone when you brought it.
Hello , have the same Problem with NVRAM Warning,
Where can I find the address data for the Wifi of my Teclast T8 Tablet?
Invalid IMEI and NVRAM Error is Not Fix
For my mistake I use the "format all" option when I flash my phone by SP flash tool*without backup necessary data. Now my phone shows "NVRAM warning: err= 0x10"**and WIFI*Mac address frequently change and also IMEI is invalid. For this reason how can I fix this problem? Please give me a proper solution.**
Note: Phone does not root yet.
Doesn't work. Waste of time. There isn't enough explanation for "5- Install Drivers".
In the driver ZIP file, there are two version 1.0.4 and 1.0.8. Why have two? Which to install? And in each of them, there are 3 versions of Driver_auto_installer, and an MTK_Driver_ext. I tried the last version of Driver_auto_installer, but the writing software kept failing with "SmartPhoneSN::ConnectWithPreloader():Get dynamic preloader comport timeout".
I tried to run the "DriverInstaller.exe" in MTK_Driver_ext, but Windows said it cannot run it. It turned out that the application is 64-bit. So, I tried the same thing on a 64-bit Windows PC, but I got the same errors.
Also, the AP DB something file, it contains multiple files that start with BPL/AP per each chipset. The OP did not explain which files to use.
Related
Dear XDA,
A phone Lenovo A858t has been burned with stock rom (A858t_USR_S302_1501111200_MP13V11_BMAIN_RU
) using SP Flash Tool (preloader checkbox was checked and Format ALL and Download was chosen in selectbox):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After burn no SIM is detected and no IMEI is being shown in settings.
Could anyone suggest what to do next and fix it?
Thank you very much, really
Best regards
vv77vv said:
Dear XDA,
A phone Lenovo A858t has been burned with stock rom (A858t_USR_S302_1501111200_MP13V11_BMAIN_RU
) using SP Flash Tool (preloader checkbox was checked and Format ALL/Flash was chosen in selectbox):
.
After burn no SIM is detected and no IMEI is being shown in settings.
Could anyone suggest what to do next and fix it?
Best regards
Click to expand...
Click to collapse
Hi , you have similar post about that :
https://forum.xda-developers.com/lenovo-a850/general/how-to-fix-imei-lost-invalid-t3151987
Good luck
Teddy Lo said:
Hi , you have similar post about that :
https://forum.xda-developers.com/lenovo-a850/general/how-to-fix-imei-lost-invalid-t3151987
Good luck
Click to expand...
Click to collapse
Thank you very much! Worked!!!
One is interesting. When calling *#06# it shows two same IMEIs, but we've wrote different IMEIs for Phone 1 and Phone 2 as was suggested ( IMEI for Phone 1 + 8 ). Is that okay? ( Btw, signal exists for both SIMs and works dialling works )
vv77vv said:
Thank you very much! Worked!!!
One is interesting. When calling *#06# it shows two same IMEIs, but we've wrote different IMEIs for Phone 1 and Phone 2[/U as was suggested ( IMEI for Phone 1 + 8 ). Is that okay? ( Btw, signal exists for both SIMs and works dialling works )
Click to expand...
Click to collapse
No it is not good when you have same imei numbers , you must again to do the same proces :
look from here write two Original imei numbers which you can find on sticker below the battery :
Like for example
Imei 1: 359160070214058
write command
AT + EGMR = 1.7, "359160070214058"
Press SEND AT COMMAND
Imei 2: 359160070214060
AT + EGMR = 1.10, "359160070214060"
Press SEND AT COMMAND
Restart your device and check your IMEI .
WARNING !!! Don't use these imei numbers use your Original .
Good luck
Teddy Lo said:
No it is not good when you have same imei numbers , you must again to do the same proces :
look from here write two Original imei numbers which you can find on sticker below the battery :
Like for example
Imei 1: 359160070214058
write command
AT + EGMR = 1.7, "359160070214058"
Press SEND AT COMMAND
Imei 2: 359160070214060
AT + EGMR = 1.10, "359160070214060"
Press SEND AT COMMAND
Restart your device and check your IMEI .
WARNING !!! Don't use these imei numbers use your Original .
Good luck
Click to expand...
Click to collapse
Thank you, but where did you find second IMEI? Isn't it first IMEI with added 8? Like 359160070214058 +8 = 359160070214066 ?
Also, should we choose Phone 2 before sending command?
Thank you very much!
vv77vv said:
Thank you, but where did you find second IMEI? Isn't it first IMEI with added 8? Like 359160070214058 +8 = 359160070214066 ?
Also, should we choose Phone 2 before sending command?
Thank you very much!
Click to expand...
Click to collapse
Hi , you didn't understand me , you don't need to add 8 like I said , just put 15 digits numbers (imei).
For One imei for First sim:
example (I will use this imei just for example)
Imei 1: 359160070214058
write command
AT + EGMR = 1.7, "359160070214058"
Press SEND AT COMMAND and reboot your device!
example (I will use this imei just for example)
For second imei Second sim:
Imei 2: 359160070214060
AT + EGMR = 1.10, "359160070214060"
Press SEND AT COMMAND
Restart your device and check your IMEI .
Of you still didn't understand here is some ov example what you need to do .
https://www.youtube.com/watch?v=B40C2hoxn8U
Dear Community,
Model: Lenovo X2-CU (is that Vibe X2?)
It has these problems:
IMEI1 is unknown
NVRAM WARNING: Err=0x10(which results in wrong WiFi MAC address)
Also, IMEI2 is valid
I've, recently, tried to restore NVRAM(IMEI + WiFi MAC address) using SN Write Tool(after Format ALL + Download method using SP Flash Tool), but it gives:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After that, it just hangs in META mode:
Stock ROM X2-AP_ROW_S223_150528(it also supports X2-CU model) is downloaded from https://www.needrom.com/download/lenovo-x2-ap/. Which, also, includes Modem and AP databases for IMEI and WiFi MAC restore.
Files BPLGUInfoCustomAppSrcP_MT6595_S00_X2-AP-L_V2_1_lwg_n and APDB_MT6795_S01_L0.MP5_W15.20 were chosen while using tool.
I've tried near everything:
1. Reinstalling VCOM drivers(by the way, they are from Vibe X2 drivers)
2. Using different versions to restore NVRAM:
SN_Write_Tool_v2.1504.00
SN_Write_tool_exe_v2.1412.00
SN-Write-Tool.2.13
IMEI and SN Writer v1.5.3
3. Chaging USB port
All in all, what could gives these errors? How to restore NVRAM correctly then?
ERROR!!SwitchMDBIndex[1] : MetaResult = META_FAILED
Click to expand...
Click to collapse
SP_META_ConnectInMetaMode_r Error: maybe is DEFAULT_FAIL cause this error...
Error: Connect failed, Exit Meta Mode
Click to expand...
Click to collapse
Thank you very much,
Best regards
Try This
vv77vv said:
Dear Community,
Model: Lenovo X2-CU (is that Vibe X2?)
It has these problems:
IMEI1 is unknown
NVRAM WARNING: Err=0x10(which results in wrong WiFi MAC address)
Also, IMEI2 is valid
I've, recently, tried to restore NVRAM(IMEI + WiFi MAC address) using SN Write Tool(after Format ALL + Download method using SP Flash Tool), but it gives:
After that, it just hangs in META mode:
Stock ROM X2-AP_ROW_S223_150528(it also supports X2-CU model) is downloaded from https://www.needrom.com/download/lenovo-x2-ap/. Which, also, includes Modem and AP databases for IMEI and WiFi MAC restore.
Files BPLGUInfoCustomAppSrcP_MT6595_S00_X2-AP-L_V2_1_lwg_n and APDB_MT6795_S01_L0.MP5_W15.20 were chosen while using tool.
I've tried near everything:
1. Reinstalling VCOM drivers(by the way, they are from Vibe X2 drivers)
2. Using different versions to restore NVRAM:
SN_Write_Tool_v2.1504.00
SN_Write_tool_exe_v2.1412.00
SN-Write-Tool.2.13
IMEI and SN Writer v1.5.3
3. Chaging USB port
All in all, what could gives these errors? How to restore NVRAM correctly then?
Thank you very much,
Best regards
Click to expand...
Click to collapse
Hi there,
You can use the mobileuncletool and use the engineering mode to manually insert the imei number which can be found back of the phone or the phones box or evening the sim tray. Make sure that you root your device first before inserting the imei, it's more effective.
Thank you
KIBS2173
KIBS2173 said:
Hi there,
You can use the mobileuncletool and use the engineering mode to manually insert the imei number which can be found back of the phone or the phones box or evening the sim tray. Make sure that you root your device first before inserting the imei, it's more effective.
Thank you
KIBS2173
Click to expand...
Click to collapse
Dear KIBS2173,
I've already tried that and getting:
Also, I can't root this phone, because its firmware will fail to OTA update with it.
Thank you
Try This
vv77vv said:
Dear KIBS2173,
I've already tried that and getting:
Also, I can't root this phone, because its firmware will fail to OTA update with it.
Thank you
Click to expand...
Click to collapse
Hi there,
have you tried not putting a space between AT+EGMR.
If that doesn't work try this method
use mtk driod tool
https://androidmtk.com/download-mtk-droid-tool
However you need to root for this method and it's a must have, without root access you cannot insert the imei. So using this mtk driod tool you can insert the imei then reboot the phone and check if its working. If it's working then you can backup the imei using mtk driod tool and now you can unroot the device, reflash the whole firmware and then restore the imei using mtk driod tool.
But you need to have ROOT no matter what.
Thank you
KIBS2173
To backup your EFS & NVRAM or to modify band settings, you need to enable Qualcomm's modem diag port. This usually requires root, but it seems that there's a built in system app that allows you to toggle this capability directly.
To enable diag, enter ##3424# in the dialer, and press the "Diag port' checkbox in the popup. Then, you would need to install Android HS-USB Diagnostics AF2E driver, which is also attached below.
The phone should now show up under QPST, and you can dig around policyman in EFS explorer & also create xQCN backups.
Have fun!
android-hs-usb-diagnostics-af2e-68764.zip - https://www.androidfilehost.com/?fid=8889791610682948798
hi, I bought the single SIM version but I would like to enable the dual SIM mode, how can I do? i know that with qpst you can do many things .. could you tell me how?
Eric1084 said:
To backup your EFS & NVRAM or to modify band settings, you need to enable Qualcomm's modem diag port. This usually requires root, but it seems that there's a built in system app that allows you to toggle this capability directly.
To enable diag, enter ##3424# in the dialer, and press the "Diag port' checkbox in the popup. Then, you would need to install Android HS-USB Diagnostics AF2E driver, which is also attached below.
The phone should now show up under QPST, and you can dig around policyman in EFS explorer & also create xQCN backups.
Have fun!
Click to expand...
Click to collapse
link not found
darkherman said:
link not found
Click to expand...
Click to collapse
Thanks. Looks like it's just XDA being XDA. Reuploaded to AFH.
Eric1084 said:
Thanks. Looks like it's just XDA being XDA. Reuploaded to AFH.
Click to expand...
Click to collapse
Thanks, I'm thinking to buy the variant Revvl 5G, as I see the step you uploaded you can make backup EFS and NVRAM and then you can also rewrite, which means you can unlock to use sim card from other country.
Surely the group of unlock box as Sigma Box and others, should be working on the way to make it unlock on the network
Need stock T-Mobile Rom for TCL T790Z
crf19 said:
Need stock T-Mobile Rom for TCL T790Z
Click to expand...
Click to collapse
maybe with Sugar QCT SP Gotu2 but you must have a TCL server account
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download cx file explorer from play store you can view certain folders from system without being rooted. Tcl 10 5g verizon Model T790S. Thiers not a day that goes by that I don't try to root this thing Need more support Lets go developers let's get this beast rooted .!!
EnumC said:
To backup your EFS & NVRAM or to modify band settings, you need to enable Qualcomm's modem diag port. This usually requires root, but it seems that there's a built in system app that allows you to toggle this capability directly.
To enable diag, enter ##3424# in the dialer, and press the "Diag port' checkbox in the popup. Then, you would need to install Android HS-USB Diagnostics AF2E driver, which is also attached below.
The phone should now show up under QPST, and you can dig around policyman in EFS explorer & also create xQCN backups.
Have fun!
android-hs-usb-diagnostics-af2e-68764.zip - https://www.androidfilehost.com/?fid=8889791610682948798
Click to expand...
Click to collapse
I have one just the same and I need to unlock it, can you please help me with the link
Can I switch carriers with the t mobile variant
Hi, i tried to install lineage OS, but got bootloop.
I unlocked bootloader with MediatekBootloaderUnlock cmd file. Did many manipulations, got LOS working with bugs, wiped everyhing.
I installed custom patched boot from 4pda (from other firmware V13.0.7.0.RKEMIXM_20220419)
from recovery and after rebooted to it.
After phone got into bootloop with POCO logo.
Cannot enter fastboot and recovery.
Only after holding volume down button i get a 4 seconds phone visible in PC as com3 mediatek usb port , after it bootlopps again
Through MTK bypass i disabled bootrom protection, and phone is staying in brom mode for 30 seconds,after goes to loop.
But then what should i do? I havent used SP flash tool much. In Miflash phone isnt visible.
i got out of bootloop . downloaded MIFlash pro 7.3.608.18
Spoiler
miflash_pro-en-7.3.608.18.zip
drive.google.com
downloaded firmwavre to fastboot 5.6 GB V13.0.7.0.RKEMIXM_20220419
Spoiler
Redmi Note 11S / POCO M4 Pro – Global Stable Version List – MIUI Download Xiaomi Official ROM
Unpack firmware archive .tgz ,again unpack .tar from it
inside folder images/download agent there is a file flash.xml
Open MIFlash pro 7.3.608.18 , choose on top SP Flash v6.
Choose file flash.xml in download xml
Authentication file.A bit harder. Folks from xda found a way to bypass brom through downloading python and other stuff.
Phone after holding volume down buttononly visible to pc by 4 seconds ,after disappear and goes to reboot.
i used a program MTK META UtilityV44, press MTK BRom - Disable Authconnect , connect phone with volume down button holded.
in a left screen of program you will see brom bprotection removed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Aftel go to SPFlashtoolv6 and press download - download only.
The system would start flashing .after 6 minutes there would be a green sucess button.disconnect phone
But after turning on MUIU logo flashed for 2 seconds and disappeared and phone booted to recovery MUIU and says "nv data corrupted"
I have installed orangefox.
After installed LOS 19 through fastboot. But it didnt start (before losing imei it didnt start too with orangefox) ,but after flashing patched boot from 4pda the system started.
So now i lost IMEI. Cant understand how to recover. I tried using MAUI Meta, but my phone is not visible.
can somebody please backup nvram/nvdata partition with MAUIMeta or SPflashtool?
would very much appreciate, i cant use my phone now, lost 200$
i have wrote imei numbers with maui meta, but radio is off in ingineering menu in LOS,stock ram doesnt turn on.
can please somebody backup nvram , nvdata,nvcfg with spflashtool? i would change the imeis to my
Wouldn't sharing our nvram etc. backups with you essentially mean you would be using our devices IMEI/MEID? I wouldn't be comfortable with this I'm afraid, sorry!
aricooperdavis said:
Wouldn't sharing our nvram etc. backups with you essentially mean you would be using our devices IMEI/MEID? I wouldn't be comfortable with this I'm afraid, sorry!
Click to expand...
Click to collapse
yes, if you make backup all of those data will be inside.
you can change the IMEI numbers to null in Maui Meta (connection with brom bypass using mtkmetautility v44, reboot to meta mode) , duty in meta mode -imei download, change them to 0 , save nvdata, then change IMEI back to yours.
or with hex editor,but i haven't used it.
i managed to start the phone with nvram and nvdata from rn11s.
miui stock ram, but im unable to write imei numbers.
if i flash nvram and nvdata in SPFT later my phone is not visible with maui meta
if i dont flash nvram,nvdata phone is visible in maui meta, but after writing imei nubmers nothing happen.
i tried Tft_mtk6 cracked tool, but it doesnt work aswell.
blacklinkin said:
i managed to start the phone with nvram and nvdata from rn11s.
miui stock ram, but im unable to write imei numbers.
if i flash nvram and nvdata in SPFT later my phone is not visible with maui meta
if i dont flash nvram,nvdata phone is visible in maui meta, but after writing imei nubmers nothing happen.
i tried Tft_mtk6 cracked tool, but it doesnt work aswell.
Click to expand...
Click to collapse
Can you send NVRAM and NVDATA of rn11s.. let me check.....
Same issues here...
Is the problem solved?
BoysNap said:
Can you send NVRAM and NVDATA of rn11s.. let me check.....
Same issues here...
Is the problem solved?
Click to expand...
Click to collapse
wherr to find
NVRAM and NVDATA?
This will probably work in any region but test in Australia
**** Please download everything from the links provided as the versions ****
**** of the same tool might not work from somewhere else ****
*** I'm not responsible if you mess up ***
Easy way to get new UI 2.0 Android 11
-------------------------------------------------------------------------------
Step 0
1. Have Official Firmware from the link below - no root
2. Locked Bootloader
3. Open the phone app and dial *#391#
4. Select Region Australia Vodaphone, Telestra, and Optus
if the provider not showing they might be using one of the above networks. Google IT!
*** The Phone will reboot and the new update will show, just update ***
Done
Manual way to get new UI 2.0 Android 11
-------------------------------------------------------------------------------
Step 1
**** What you need to download ****
1. Download Firmware
Firmware - RMX2111PU_11_A.33
2. Winrar / 7zip - To unpack the firmware to multiple files
Winrar / 7zip
3. MTK META Utility V50 - To bypass auth and enter flashing mode
MTK META Utility V50
4. SP_Flash_Tool_v5.2216_Win - To flash firmware to the device
SP Flash Tool
5. MTK Drivers - Very specific so download provided drivers
MTK Drivers
7. mct ofp extractor
MCT OFP Extractor
6. Realme 7 5G Device + Genuine Cable
-------------------------------------------------------------------------------
Step 2
1. Install Drivers and Extract Downloads
2. Turn off your phone
2.5 Open MCT OFP Extractor and extract firmware from (.ofp file)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Open MTK META Utility V50 and click Disable auth
4. On your phone press Volume UP + Volume Down and connect USB cable
*** You will hear something connect to your computer but nothing on the screen as see stuff on the program ***
Waiting for mtk usb device... ok
BootMode : BootRom[COM3]
DriverDesc : MediaTek USB Port
DriverPath : usb\vid_0e8d&pid_0003\6&363b4ca8&0&8
DriverSRV : wdm_usb
DriverVersion : 3.0.1504.0
DriverDate : 1-22-2015
DriverCFG : oem34.inf
DriverOEM : MediaTek Inc.
Connecting to BootROM......
● Chipset MT6853
● SecCFG SBC+SDA
Disable BRom protection...
MTK Auth Disable(SLA/DAA) success!
Click to expand...
Click to collapse
5. Open SP Flash Tool, you may see errors just press ok till the program opens
6. Select the Scatter file from the extracted firmware
7. select the authentication file from the extracted firmware
8. Click Option>Option and the settings should look something like this
9. Mak Sure this looks like this on "download only" mode
10. Click download, you may get few error just click ok and re-press download till the process
start as its old software sometimes its buggy
11. Once the process is complete reboot phone by press & hold Power Button + Volume Up
Now you can do Step 0 and should be able to Update to UI 2.0
Reserved
reserved 2
This actually helped me a huge deal mate, took a few too many liberties when trying to get into Fastboot on this device! Cheers!!!