Dear XDA,
A phone Lenovo A858t has been burned with stock rom (A858t_USR_S302_1501111200_MP13V11_BMAIN_RU
) using SP Flash Tool (preloader checkbox was checked and Format ALL and Download was chosen in selectbox):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After burn no SIM is detected and no IMEI is being shown in settings.
Could anyone suggest what to do next and fix it?
Thank you very much, really
Best regards
vv77vv said:
Dear XDA,
A phone Lenovo A858t has been burned with stock rom (A858t_USR_S302_1501111200_MP13V11_BMAIN_RU
) using SP Flash Tool (preloader checkbox was checked and Format ALL/Flash was chosen in selectbox):
.
After burn no SIM is detected and no IMEI is being shown in settings.
Could anyone suggest what to do next and fix it?
Best regards
Click to expand...
Click to collapse
Hi , you have similar post about that :
https://forum.xda-developers.com/lenovo-a850/general/how-to-fix-imei-lost-invalid-t3151987
Good luck
Teddy Lo said:
Hi , you have similar post about that :
https://forum.xda-developers.com/lenovo-a850/general/how-to-fix-imei-lost-invalid-t3151987
Good luck
Click to expand...
Click to collapse
Thank you very much! Worked!!!
One is interesting. When calling *#06# it shows two same IMEIs, but we've wrote different IMEIs for Phone 1 and Phone 2 as was suggested ( IMEI for Phone 1 + 8 ). Is that okay? ( Btw, signal exists for both SIMs and works dialling works )
vv77vv said:
Thank you very much! Worked!!!
One is interesting. When calling *#06# it shows two same IMEIs, but we've wrote different IMEIs for Phone 1 and Phone 2[/U as was suggested ( IMEI for Phone 1 + 8 ). Is that okay? ( Btw, signal exists for both SIMs and works dialling works )
Click to expand...
Click to collapse
No it is not good when you have same imei numbers , you must again to do the same proces :
look from here write two Original imei numbers which you can find on sticker below the battery :
Like for example
Imei 1: 359160070214058
write command
AT + EGMR = 1.7, "359160070214058"
Press SEND AT COMMAND
Imei 2: 359160070214060
AT + EGMR = 1.10, "359160070214060"
Press SEND AT COMMAND
Restart your device and check your IMEI .
WARNING !!! Don't use these imei numbers use your Original .
Good luck
Teddy Lo said:
No it is not good when you have same imei numbers , you must again to do the same proces :
look from here write two Original imei numbers which you can find on sticker below the battery :
Like for example
Imei 1: 359160070214058
write command
AT + EGMR = 1.7, "359160070214058"
Press SEND AT COMMAND
Imei 2: 359160070214060
AT + EGMR = 1.10, "359160070214060"
Press SEND AT COMMAND
Restart your device and check your IMEI .
WARNING !!! Don't use these imei numbers use your Original .
Good luck
Click to expand...
Click to collapse
Thank you, but where did you find second IMEI? Isn't it first IMEI with added 8? Like 359160070214058 +8 = 359160070214066 ?
Also, should we choose Phone 2 before sending command?
Thank you very much!
vv77vv said:
Thank you, but where did you find second IMEI? Isn't it first IMEI with added 8? Like 359160070214058 +8 = 359160070214066 ?
Also, should we choose Phone 2 before sending command?
Thank you very much!
Click to expand...
Click to collapse
Hi , you didn't understand me , you don't need to add 8 like I said , just put 15 digits numbers (imei).
For One imei for First sim:
example (I will use this imei just for example)
Imei 1: 359160070214058
write command
AT + EGMR = 1.7, "359160070214058"
Press SEND AT COMMAND and reboot your device!
example (I will use this imei just for example)
For second imei Second sim:
Imei 2: 359160070214060
AT + EGMR = 1.10, "359160070214060"
Press SEND AT COMMAND
Restart your device and check your IMEI .
Of you still didn't understand here is some ov example what you need to do .
https://www.youtube.com/watch?v=B40C2hoxn8U
Related
PLEASE HELP, I have the Haipai N6 N7889 6" phone and yes its a clone but it is a fantastic phone but I need your help, I changed the rom and magically my IMEI went bye bye!! I've used every method known to man, and what I found out that I need my original rom. Now NONE OF THE METHODS ON THIS FORUM WORK!! I'VE TRIED THEM AND OTHERS AND THEY DON'T WORK!! I need the original rom or a rom that someone has used and THEY KNOW FOR A FACT THAT IT WORKS!! I am tired of people posting stuff they haven't tried and wasting my time. I am thankful for the advise but I am tired of people not knowing if stuff is working and posting that it worked on windows 7 or their friends computer and not sure if it did. Please help I really need my phone and no I can't get another. Thanks for the real help!!
trayluv73 said:
PLEASE HELP, I have the Haipai N6 N7889 6" phone and yes its a clone but it is a fantastic phone but I need your help, I changed the rom and magically my IMEI went bye bye!! I've used every method known to man, and what I found out that I need my original rom. Now NONE OF THE METHODS ON THIS FORUM WORK!! I'VE TRIED THEM AND OTHERS AND THEY DON'T WORK!! I need the original rom or a rom that someone has used and THEY KNOW FOR A FACT THAT IT WORKS!! I am tired of people posting stuff they haven't tried and wasting my time. I am thankful for the advise but I am tired of people not knowing if stuff is working and posting that it worked on windows 7 or their friends computer and not sure if it did. Please help I really need my phone and no I can't get another. Thanks for the real help!!
Click to expand...
Click to collapse
The problem is that most people don't have a Haipai phone and they are giving you advice based on their own experience. I know it is frustrating when it doesn't work, but please remember that they mean well. Most manufacturer's have firmware on their websites, so that is the place I would look...sorry if this isn't true for Haipai...you know how it is
justmpm said:
The problem is that most people don't have a Haipai phone and they are giving you advice based on their own experience. I know it is frustrating when it doesn't work, but please remember that they mean well. Most manufacturer's have firmware on their websites, so that is the place I would look...sorry if this isn't true for Haipai...you know how it is
Click to expand...
Click to collapse
Yes and I am thankful for the advise, I have fixed other phones from here and thanked the people for the help. I need my phone and its frustrating that I can't seem to get it fixed. Do you know the Haipai website because when I google it, I can't seem to find it.
Hi, first tip
http://www.androidgroupon.com/2013/06/13/imei-repair-for-mtk-phone.html
Not working?! Look what mtk cpu u have and Google mtk.... Imei repair
Gesendet von meinem Xperia SP
I tried using SN writer several times. I installed MTK USB drivers, and I followed the following steps:
1. turned off my mobile
2. connected my mobile to PC.
3. run the SN writer
4. click start
5. enter IMEI number
6. remove the battery and insert it again, while USB cable is connecting my device to PC
7. I got the following messages and writing IMEI failed, as the device came from factory without writing IMEI on it.
>>—————————————————<<
>>Step: Scan Smartphone IMEI.
OK: IMEI[0] = "15 digits".
>>Step: Start to Connect with target.
COM port searching and preloader handshake
COM port searching and preloader handshake ok
COM port searching and Kernel handshake
Error: Connect failed, Exit Meta Mode and turn to next phone.
can you please guide me what shall I do or what was the wrong thing I did.
trayluv73 said:
PLEASE HELP, I have the Haipai N6 N7889
Click to expand...
Click to collapse
try downloads from here http://www.mobile01.com/topicdetail.php?f=586&t=3365251&last=46234383 and here http://www.mobile01.com/topicdetail.php?f=586&t=3365251&p=2
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
Ok I downloaded the roms xsenman suggested and one of them is kind of working. I used sn station tool to write imei back on my phone and I got the green light BUT STILL INVALID IMEI!! I tried mk droid tool no luck. I'm all ears on the next step.
trayluv73 said:
Ok I downloaded the roms xsenman suggested and one of them is kind of working. I used sn station tool to write imei back on my phone and I got the green light BUT STILL INVALID IMEI!! I tried mk droid tool no luck. I'm all ears on the next step.
Click to expand...
Click to collapse
Hi, man! I know how to repair it!
--Download an Engineer Menu for MTK in play market.
--Then enter it.
--Then follow the menu :
"CDS Information> Radio Information> Phone 1"
--In the top row , after writing and enter AT + EGMR = 1,7, »YOUR_IMEI_PHONE1».
--Confirm your selection by pressing the SEND AT COMMAND.
--Then be sure to reboot device!
--Write commands separately for each SIM card .
that's all!!
Greetings from Russia!!
Hi guys I have zte blade l2 single sim missed imei while changing Roms . but I tried SN write tool ,maui meta , all showing error.
In Maui meta it's showingboot ROM communication failed . while please help me
nemelkiy said:
Hi, man! I know how to repair it!
--Download an Engineer Menu for MTK in play market.
--Then enter it.
--Then follow the menu :
"CDS Information> Radio Information> Phone 1"
--In the top row , after writing and enter AT + EGMR = 1,7, »YOUR_IMEI_PHONE1».
--Confirm your selection by pressing the SEND AT COMMAND.
--Then be sure to reboot device!
--Write commands separately for each SIM card .
that's all!!
Greetings from Russia!!
Click to expand...
Click to collapse
i was looking for a solution too, finally this helped. also had help from a youtube video
youtube.com/watch?v=w9POQK3kf6U
Thanks guys
Friends, I need help LS990 ( Views: 124 user ... 0 replies .. Who knows how to solve the problem, tell me. )
There were the power cut during the firmware.
Friends, can help to restore the backup EFS with the same phone? This help me?
EFS, imei, serial, gps, Baseband unknown - not working
wifi, Bluetooth - working
The re-flashing didn’t brought any results.
UPD oops (((((( I can't write 000000 spc.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have the same problem
Did you solve it?
iwtb.alone said:
I have the same problem
Did you solve it?
Click to expand...
Click to collapse
Yes =)
No problem.
modemst ls990
cloud. mail. ru/public/wKLY/QAEQSUA9d
soft for img backup
play. google.com/store/apps/details?id=ma.wanam.partitions#
Edit the links! (Remove spaces)
good luck, friend
Thank you for your prompt reply!
Thank you very much..!
iwtb.alone said:
Thank you for your prompt reply!
But error occurred
Capture Error:
i.imgur.com/12TDVuf.png
Click to expand...
Click to collapse
1 ) modem_backup_2015-12-02_12-45-25.img (64 mb) mmcblk0p1
2) modemst1_backup_2015-12-02_12-45-25.img (3mb) mmcblk02p21
3) modemst2_backup_2015-12-02_12-45-25.img (3mb) mmcblk0p22
EFS & MODEM for LG G3 LS990!
I got my IMEI back, but now imei number is 35030526000004. How do you know recover original IMEI?
iwtb.alone said:
I got my IMEI back, but now imei number is 35030526000004. How do you know recover original IMEI?
Click to expand...
Click to collapse
Can you make the calls with this phone now?
Vasiliskin said:
Can you make the calls with this phone now?
Click to expand...
Click to collapse
Yes! Calls ok, but mobile data can't connect. Error: Unable to establish a wireless data connection
Need help!!
this seems to be the most recent post for this issue. I need help as a stock ROM has corrupted my MEID and IMEI. I have the original numbers on the phone, but they do not match what the software is reporting. How can I change this back. Unfortunately I did not back up first. PLEASE HELP!!!
iwtb.alone said:
Yes! Calls ok, but mobile data can't connect. Error: Unable to establish a wireless data connection
Click to expand...
Click to collapse
j83holmes said:
this seems to be the most recent post for this issue. I need help as a stock ROM has corrupted my MEID and IMEI. I have the original numbers on the phone, but they do not match what the software is reporting. How can I change this back. Unfortunately I did not back up first. PLEASE HELP!!!
Click to expand...
Click to collapse
Make backup copies !!!
Recovery TWRP - full backup on a flash drive.
Good luck, my friends
Good...
It can be fixed.
Programs for this hotfix
1) DFS (CDMA DFS Tool)
2) CDMA Workshop 2.7
If you do not know how to use these programs, you can hurt and make brick.
https://cloud.mail.ru/public/GRGV/EEoj7SiT5
Vasiliskin said:
1 ) modem_backup_2015-12-02_12-45-25.img (64 mb) mmcblk0p1
2) modemst1_backup_2015-12-02_12-45-25.img (3mb) mmcblk02p21
3) modemst2_backup_2015-12-02_12-45-25.img (3mb) mmcblk0p22
EFS & MODEM for LG G3 LS990!
Click to expand...
Click to collapse
Hello could you upload the files again?
I have a realted problem with an Lgg3 ls990.
Thank you
WiFi "NVRAM WARNING: ERR 0x10" Problem Fixed
The reasons for the appearance of this error
1- Write Firmware After Select in SP FLASH TOOL to Format All + Download
2- After Root + Insert Nvram File for another Model
3- After Upgrade System by OTA Upgrade
Fix the error problem
1- Download MTK ALL USB Driver 1.0.4 -1.0.8
2- Download SN Writer Tool v1.1728
3- Download AP_BP_Base
4- Extracted Files
5- Install Drivers
6- Open SN Write Tool Folder and Double Click to SN Writer.exe
7- Select in Interface Program
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
8- Click "System Config" and select Choose
9- Click "Start" and Writing IMEI1 / IMEI2 / Wifi Address
10- Processing
11- Finish
========================= Notes: =========================
1- If you do not find the modem file, just watch the following video:
2- After and Before Processing:
========================================================
i dont have IMEI 1 and IMEI 2
what to do if you dont have IMEI 1 and IMEI 2 , when i searched in my phone i found IMEI UNKOWN ?
Amrati23 said:
what to do if you dont have IMEI 1 and IMEI 2 , when i searched in my phone i found IMEI UNKOWN ?
Click to expand...
Click to collapse
you can download in the google playstore the app System info for Android.. open the app and go to System -telephony and their it has to be..
DiaboliCall
other solution for fixing invalid imei on infinix note 3 pro ?
hi master i am having always the same msg (entering meta mode failed ) but i am in meta mode and its affiched in little letters in the downscreen, so what is the solution, i tried more versions of imei writer and always the same msg ???
Know IMEI Original Code
Amrati23 said:
what to do if you dont have IMEI 1 and IMEI 2 , when i searched in my phone i found IMEI UNKOWN ?
Click to expand...
Click to collapse
In your phone there you can find your imei number after removing your battery or back cover. If your phone comes with a fix battery and cover then you can find those number from your mobile box that give you with phone when you brought it.
Hello , have the same Problem with NVRAM Warning,
Where can I find the address data for the Wifi of my Teclast T8 Tablet?
Invalid IMEI and NVRAM Error is Not Fix
For my mistake I use the "format all" option when I flash my phone by SP flash tool*without backup necessary data. Now my phone shows "NVRAM warning: err= 0x10"**and WIFI*Mac address frequently change and also IMEI is invalid. For this reason how can I fix this problem? Please give me a proper solution.**
Note: Phone does not root yet.
Doesn't work. Waste of time. There isn't enough explanation for "5- Install Drivers".
In the driver ZIP file, there are two version 1.0.4 and 1.0.8. Why have two? Which to install? And in each of them, there are 3 versions of Driver_auto_installer, and an MTK_Driver_ext. I tried the last version of Driver_auto_installer, but the writing software kept failing with "SmartPhoneSN::ConnectWithPreloader():Get dynamic preloader comport timeout".
I tried to run the "DriverInstaller.exe" in MTK_Driver_ext, but Windows said it cannot run it. It turned out that the application is 64-bit. So, I tried the same thing on a 64-bit Windows PC, but I got the same errors.
Also, the AP DB something file, it contains multiple files that start with BPL/AP per each chipset. The OP did not explain which files to use.
Dear Community,
Model: Lenovo X2-CU (is that Vibe X2?)
It has these problems:
IMEI1 is unknown
NVRAM WARNING: Err=0x10(which results in wrong WiFi MAC address)
Also, IMEI2 is valid
I've, recently, tried to restore NVRAM(IMEI + WiFi MAC address) using SN Write Tool(after Format ALL + Download method using SP Flash Tool), but it gives:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After that, it just hangs in META mode:
Stock ROM X2-AP_ROW_S223_150528(it also supports X2-CU model) is downloaded from https://www.needrom.com/download/lenovo-x2-ap/. Which, also, includes Modem and AP databases for IMEI and WiFi MAC restore.
Files BPLGUInfoCustomAppSrcP_MT6595_S00_X2-AP-L_V2_1_lwg_n and APDB_MT6795_S01_L0.MP5_W15.20 were chosen while using tool.
I've tried near everything:
1. Reinstalling VCOM drivers(by the way, they are from Vibe X2 drivers)
2. Using different versions to restore NVRAM:
SN_Write_Tool_v2.1504.00
SN_Write_tool_exe_v2.1412.00
SN-Write-Tool.2.13
IMEI and SN Writer v1.5.3
3. Chaging USB port
All in all, what could gives these errors? How to restore NVRAM correctly then?
ERROR!!SwitchMDBIndex[1] : MetaResult = META_FAILED
Click to expand...
Click to collapse
SP_META_ConnectInMetaMode_r Error: maybe is DEFAULT_FAIL cause this error...
Error: Connect failed, Exit Meta Mode
Click to expand...
Click to collapse
Thank you very much,
Best regards
Try This
vv77vv said:
Dear Community,
Model: Lenovo X2-CU (is that Vibe X2?)
It has these problems:
IMEI1 is unknown
NVRAM WARNING: Err=0x10(which results in wrong WiFi MAC address)
Also, IMEI2 is valid
I've, recently, tried to restore NVRAM(IMEI + WiFi MAC address) using SN Write Tool(after Format ALL + Download method using SP Flash Tool), but it gives:
After that, it just hangs in META mode:
Stock ROM X2-AP_ROW_S223_150528(it also supports X2-CU model) is downloaded from https://www.needrom.com/download/lenovo-x2-ap/. Which, also, includes Modem and AP databases for IMEI and WiFi MAC restore.
Files BPLGUInfoCustomAppSrcP_MT6595_S00_X2-AP-L_V2_1_lwg_n and APDB_MT6795_S01_L0.MP5_W15.20 were chosen while using tool.
I've tried near everything:
1. Reinstalling VCOM drivers(by the way, they are from Vibe X2 drivers)
2. Using different versions to restore NVRAM:
SN_Write_Tool_v2.1504.00
SN_Write_tool_exe_v2.1412.00
SN-Write-Tool.2.13
IMEI and SN Writer v1.5.3
3. Chaging USB port
All in all, what could gives these errors? How to restore NVRAM correctly then?
Thank you very much,
Best regards
Click to expand...
Click to collapse
Hi there,
You can use the mobileuncletool and use the engineering mode to manually insert the imei number which can be found back of the phone or the phones box or evening the sim tray. Make sure that you root your device first before inserting the imei, it's more effective.
Thank you
KIBS2173
KIBS2173 said:
Hi there,
You can use the mobileuncletool and use the engineering mode to manually insert the imei number which can be found back of the phone or the phones box or evening the sim tray. Make sure that you root your device first before inserting the imei, it's more effective.
Thank you
KIBS2173
Click to expand...
Click to collapse
Dear KIBS2173,
I've already tried that and getting:
Also, I can't root this phone, because its firmware will fail to OTA update with it.
Thank you
Try This
vv77vv said:
Dear KIBS2173,
I've already tried that and getting:
Also, I can't root this phone, because its firmware will fail to OTA update with it.
Thank you
Click to expand...
Click to collapse
Hi there,
have you tried not putting a space between AT+EGMR.
If that doesn't work try this method
use mtk driod tool
https://androidmtk.com/download-mtk-droid-tool
However you need to root for this method and it's a must have, without root access you cannot insert the imei. So using this mtk driod tool you can insert the imei then reboot the phone and check if its working. If it's working then you can backup the imei using mtk driod tool and now you can unroot the device, reflash the whole firmware and then restore the imei using mtk driod tool.
But you need to have ROOT no matter what.
Thank you
KIBS2173
Hi,
I have a question about my old kenzo. I flashed Pixel experience and since then the phone lost its SIM signal. I already flashed the stock ROM (MIUI 8 & MIUI 10) from recovery and fastboot, I flashed the NON-HLOS.bin file, I restored the IMEI too and it's still not working. Anyone has another approach for this problem?
PD: It's curious because I can see the SIM provider's name and the phone seems to have SIM signal ONLY if I have turned on the WIFI, but if I try to make a call (even if the WiFi is turned on or not) I receive the following message: "mobile network not available".
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry for my bad English.
Thanks in advance!
MoNiKoS said:
Hi,
I have a question about my old kenzo. I flashed Pixel experience and since then the phone lost its SIM signal. I already flashed the stock ROM (MIUI 8 & MIUI 10) from recovery and fastboot, I flashed the NON-HLOS.bin file, I restored the IMEI too and it's still not working. Anyone has another approach for this problem?
PD: It's curious because I can see the SIM provider's name and the phone seems to have SIM signal ONLY if I have turned on the WIFI, but if I try to make a call (even if the WiFi is turned on or not) I receive the following message: "mobile network not available".
Screenshot:
Sorry for my bad English.
Thanks in advance!
Click to expand...
Click to collapse
Try jio sim.
Black_Stark said:
Try jio sim.
Click to expand...
Click to collapse
I forgot to mentioned it, but I'm from Colombia so I can't use Jio SIM
MoNiKoS said:
I forgot to mentioned it, but I'm from Colombia so I can't use Jio SIM
Click to expand...
Click to collapse
Can u see ur baseband info under phone - about info ?
Or is it showing baseband unknown?
Black_Stark said:
Can u see ur baseband info under phone - about info ?
Or is it showing baseband unknown?
Click to expand...
Click to collapse
Hi. I recently installed LineageOS 13 and I can see it (and I am always able to see the Baseband version in any OS). Baseband version is "-8976_GEN_PACK-1.74446.1.75478.1"
MoNiKoS said:
Hi. I recently installed LineageOS 13 and I can see it (and I am always able to see the Baseband version in any OS). Baseband version is "-8976_GEN_PACK-1.74446.1.75478.1"
Click to expand...
Click to collapse
Why did u touch imei partition?
Black_Stark said:
Why did u touch imei partition?
Click to expand...
Click to collapse
I repaired the IMEIs because when I flashed using fastboot the phone booted without the IMEIs
MoNiKoS said:
I repaired the IMEIs because when I flashed using fastboot the phone booted without the IMEIs
Click to expand...
Click to collapse
Which method u followed to repair imei? Show me the link?
Black_Stark said:
Which method u followed to repair imei? Show me the link?
Click to expand...
Click to collapse
Sure. This is the link: http://en.miui.com/thread-271552-1-1.html
MoNiKoS said:
Sure. This is the link: http://en.miui.com/thread-271552-1-1.html
Click to expand...
Click to collapse
Use below link.
U need to repair baseband and imei both.
I think ur baseband also have problem. So follow both part1 and part 2.
https://forum.xda-developers.com/redmi-note-3/how-to/flash-recover-efs-snapdragon-t3406789/page38
Black_Stark said:
Use below link.
U need to repair baseband and imei both.
I think ur baseband also have problem. So follow both part1 and part 2.
https://forum.xda-developers.com/redmi-note-3/how-to/flash-recover-efs-snapdragon-t3406789/page38
Click to expand...
Click to collapse
Ok, i'll try it and I'll edit this message with the results. Thanks!
i also have a similar problem.
*flashed Pixel experience and lost network
*flashed the stock ROM from recovery and fastboot,
*flashed the NON-HLOS.bin file
* i never damaged the IMEI. still looks fine
* the default APN settings are stuck on a belgium provider (this hasn't changed no matter how many roms i try to flash)
* i can see the provider in the sim settings but whenever i add the providers APN the setting disappears. (particularly when i ad the mcc)
*i can't unlock the bootloader because i can't receive text messages