Related
Hello!
I hope there is someone who can help. I have purchased a second hand mini pro with custom firmware (some froyodroid). It worked for a couple of days and now it just doesnt start up anymore. When i turn it on it boots into the home screen and comes then up with dozens of error messages ie. phone was closed..., calender was closed,.... so i cant even go into the settings.
My idea was to install some other rom and hope the problem is solved but when i run flashtool i get this message
19/053/2012 01:53:15 - INFO - Selected U20_nAa-11_2.6.29.6-nAa-11.ftf
19/053/2012 01:53:15 - INFO - Preparing files for flashing
19/053/2012 01:53:15 - INFO - Please connect your device into flashmode.
19/053/2012 01:53:37 - INFO - Device connected with USB debugging off
19/053/2012 01:53:37 - INFO - For 2011 devices line, be sure you are not in MTP mode
19/054/2012 01:54:27 - INFO - Device disconnected
19/054/2012 01:54:41 - INFO - Device connected with USB debugging off
19/054/2012 01:54:41 - INFO - For 2011 devices line, be sure you are not in MTP mode
I assume it wants me to turn on USB debugging but unfortunately i cant even get into the settings. Any idea what to try to fix it?
TIA
Sorry guys, after reading some more threads i realized how to solve it. Thanks anyway
TO dosada or others who know: How to solve it?
THanks in advance!
i use flashtool before and the first time,i also dont know how to use it. but after more trials, i manage to understand on how to use flashtool (after reading thread by thread).
1. turn off the phone, unplug the cable.
2. open flashtool, selec flashmode, select kernel, then ok.
3. flashtool will give you a message about flashmode.
3. hold back button (<== arrow) and plug in the cable.
4. the flash process start.
I have two questions regarding flashtool. Before connect my phone i enable USB debugging.
When i try to connect my phone in flash mode, after few seconds it automatically reboot to flashmode. When it reboot i can see kernel boot logo. It keep rebooting to the flashmode. In addition to that, when the phone automatically reconnecting, flashtool display "USB debugging off". Why is that?
If i connect my phone after boot (normally), flashtool identify my phone WT19 as "ST17". I try to edit it in flashtool "Device>Edit", but it again identify my phone as "ST17". Why is that?
:crying:
Flash mode log:-
06/056/2012 18:56:07 - INFO - <- This level is successfully initialized
06/056/2012 18:56:07 - INFO - Flashtool Version 0.9.7.0 built on 2012-09-30 15:49:10
06/056/2012 18:56:07 - INFO - You can drag and drop ftf files here to start flashing them
06/056/2012 18:56:12 - INFO - Device disconnected
06/056/2012 18:56:38 - INFO - Device connected in flash mode
06/057/2012 18:57:19 - INFO - Device disconnected
06/057/2012 18:57:39 - INFO - Device connected with USB debugging off
06/057/2012 18:57:39 - INFO - For 2011 devices line, be sure you are not in MTP mode
06/057/2012 18:57:40 - INFO - Device disconnected
06/057/2012 18:57:43 - INFO - Device connected with USB debugging off
06/057/2012 18:57:43 - INFO - For 2011 devices line, be sure you are not in MTP mode
06/057/2012 18:57:43 - INFO - Device disconnected
Click to expand...
Click to collapse
android addicts said:
I have two questions regarding flashtool. Before connect my phone i enable USB debugging.
When i try to connect my phone in flash mode, after few seconds it automatically reboot to flashmode. When it reboot i can see kernel boot logo. It keep rebooting to the flashmode. In addition to that, when the phone automatically reconnecting, flashtool display "USB debugging off". Why is that?
If i connect my phone after boot (normally), flashtool identify my phone WT19 as "ST17". I try to edit it in flashtool "Device>Edit", but it again identify my phone as "ST17". Why is that?
:crying:
Flash mode log:-
Click to expand...
Click to collapse
On which software version are you currently on? Can you flash a wt19i firmware now on your device? Or does this fail/gives you an error?
Did you flash the wrong kernel?
Try reflashing the stock kernel/rom.
Install drivers again for windows
Sent from my MANGO using Tapatalk 2
Hi
I will try to be brief.
I have a ST18 (which has a bad flash that stops the screen working - if I press power button I can press power off/airplane mode etc but otherwise the screen is unresponsive).
The phone will not go into fastboot mode or be recognised in fb mode in windows (tried 3 different cables and 3 different pcs).
Windows 7 will recognise the phone but will not allow me to install the fb drivers ( I have tried everything, including disabling driver signing and getting windows to ask me what drivers to install).
On an XP machine, I still cannot install fb drivers but PC companion/flashtool/s1tool recognise the phone.
I have tried to work through the advice on here and reflash with various fw with flashtool but it will not fb and flash mode always stops with a security issue at the start of flashing. S1tool stops at the start of flashing with different issues depending on fw such as cannot send s1 command. DoomLord's toolkit does not recognise the phone.
I have tried everything I can find on this forum and on the web but don't want to write pages for you to sift through.
Any pointers would be really appreciated.
Thanks
jordan0001 said:
Hi
I will try to be brief.
I have a ST18 (which has a bad flash that stops the screen working - if I press power button I can press power off/airplane mode etc but otherwise the screen is unresponsive).
The phone will not go into fastboot mode or be recognised in fb mode in windows (tried 3 different cables and 3 different pcs).
Windows 7 will recognise the phone but will not allow me to install the fb drivers ( I have tried everything, including disabling driver signing and getting windows to ask me what drivers to install).
On an XP machine, I still cannot install fb drivers but PC companion/flashtool/s1tool recognise the phone.
I have tried to work through the advice on here and reflash with various fw with flashtool but it will not fb and flash mode always stops with a security issue at the start of flashing. S1tool stops at the start of flashing with different issues depending on fw such as cannot send s1 command. DoomLord's toolkit does not recognise the phone.
I have tried everything I can find on this forum and on the web but don't want to write pages for you to sift through.
Any pointers would be really appreciated.
Thanks
Click to expand...
Click to collapse
Can you post your log from flashtool and give some more information, like what you did before the problem started, if your bootloader is unlocked, are you rooted, and if you are on a custom ROM or running stock. If your bootloader is locked, have you tried to use PC Companion or SUS to fix your phone?
justmpm said:
Can you post your log from flashtool and give some more information, like what you did before the problem started, if your bootloader is unlocked, are you rooted, and if you are on a custom ROM or running stock. If your bootloader is locked, have you tried to use PC Companion or SUS to fix your phone?
Click to expand...
Click to collapse
Thanks for the quick reply justmpm
Sorry I cannot be too specific - the problem started after the phone was "unlocked" by a mobile shop.
From what I can work out, the bootloader is locked and the phone is not rooted. The phone was updated by SEUS to the latest stock.
I have had various flashtool errors, the latest of these was Read error :31 : A device attached to the system is not functioning. If I try another flash to save the log, would it be a good idea to use a particular fw as different fw give different logs?
Thanks
Any ideas at all would help.
And you have installed the drivers from flashtool -> drivers?
mihahn said:
And you have installed the drivers from flashtool -> drivers?
Click to expand...
Click to collapse
Hi
Yes, installing the flashtool drivers was the only way anything would work. Before that nothing worked which made me think this was more of a driver problem but then it does seem like the phone may be a problem with not being able to go into fastboot.
Thanks
Re: [Q] Help with ST18 bad flash
i think usb debugging is disabled on your phone and the unlocking procedure has your touchscreen firmware corrupted...
did u try repair phone option in SEUS..?
the reason why you got the device is not functioning error is because the usb debugging feature is disabled,not sure though..
can provide me the other errors you encountered in flashtool,maybe i can help you out..
a|\|droid_user said:
i think usb debugging is disabled on your phone and the unlocking procedure has your touchscreen firmware corrupted...
did u try repair phone option in SEUS..?
the reason why you got the device is not functioning error is because the usb debugging feature is disabled,not sure though..
can provide me the other errors you encountered in flashtool,maybe i can help you out..
Click to expand...
Click to collapse
Hi a|\|droid_user
What you are saying makes sense.
S1tool gives me the error
llbug:[\\?\USB#Vid_0fce&Pid_e161#43423531315632314D4C#{a5dcbf10-6530-11d2-901f-00c04fb951ed}] open error: "The system cannot find the file specified"
Here is my log for flashtool, the first is for the basic Nordic fw pack, which I read worked for other people. The second is for A fw which I think is right for my phone and the next is for B fw. The only one which seems to start to flash is the second one.
20/011/2013 13:11:22 - INFO - <- This level is successfully initialized
20/011/2013 13:11:22 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
20/011/2013 13:11:22 - INFO - You can drag and drop ftf files here to start flashing them
20/011/2013 13:11:30 - INFO - Device disconnected
20/012/2013 13:12:44 - INFO - Selected XperiaTimes.com-ST18i_4.1.B.0.431_kernel.ftf
20/012/2013 13:12:44 - INFO - Preparing files for flashing
20/012/2013 13:12:44 - INFO - Please connect your device into flashmode.
20/012/2013 13:12:54 - INFO - Device connected in flash mode
20/012/2013 13:12:54 - INFO - Opening device for R/W
20/012/2013 13:12:55 - INFO - Start Flashing
20/012/2013 13:12:55 - INFO - Processing loader
20/012/2013 13:12:55 - INFO - Checking header
20/012/2013 13:12:55 - INFO - Ending flash session
20/012/2013 13:12:55 - ERROR -
20/012/2013 13:12:55 - ERROR - Error flashing. Aborted
20/012/2013 13:12:55 - INFO - Device connected in flash mode
20/013/2013 13:13:07 - INFO - Log written to C:\Flashtool\flashtool_2013-02-20_01-11-22.log
20/013/2013 13:13:22 - INFO - Device disconnected
20/014/2013 13:14:12 - INFO - Selected ST18i_4.0.2.A.0.62.ftf
20/014/2013 13:14:12 - INFO - Preparing files for flashing
20/014/2013 13:14:25 - INFO - Please connect your device into flashmode.
20/014/2013 13:14:30 - INFO - Device connected in flash mode
20/014/2013 13:14:31 - INFO - Opening device for R/W
20/014/2013 13:14:31 - INFO - Reading device information
20/014/2013 13:14:31 - INFO - Phone ready for flashmode operations.
20/014/2013 13:14:31 - INFO - Current device : ST18i - CB511V21ML - 1252-5986_R3I - 1248-9545_4.1.B.0.587 - WORLD-i_4.1.B.0.587
20/014/2013 13:14:31 - INFO - Start Flashing
20/014/2013 13:14:31 - INFO - Processing loader
20/014/2013 13:14:31 - INFO - Checking header
20/014/2013 13:14:31 - INFO - Flashing data
20/014/2013 13:14:34 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : NOT_ROOTABLE
20/014/2013 13:14:34 - INFO - Processing kernel.sin
20/014/2013 13:14:34 - INFO - Checking header
20/014/2013 13:14:34 - INFO - Flashing data
20/014/2013 13:14:36 - INFO - Processing fota1.sin
20/014/2013 13:14:36 - INFO - Checking header
20/014/2013 13:14:36 - INFO - Flashing data
20/014/2013 13:14:36 - INFO - Ending flash session
20/014/2013 13:14:36 - ERROR - Read error :31 : A device attached to the system is not functioning.
20/014/2013 13:14:36 - ERROR - Error flashing. Aborted
20/014/2013 13:14:36 - INFO - Device connected in flash mode
20/014/2013 13:14:47 - INFO - Log written to C:\Flashtool\flashtool_2013-02-20_01-11-22.log
20/014/2013 13:14:54 - INFO - Device disconnected
20/015/2013 13:15:50 - INFO - Selected ST18i_4.1.B.0.587.ftf
20/015/2013 13:15:50 - INFO - Preparing files for flashing
20/016/2013 13:16:24 - INFO - Please connect your device into flashmode.
20/016/2013 13:16:35 - INFO - Device connected in flash mode
20/016/2013 13:16:35 - INFO - Opening device for R/W
20/016/2013 13:16:35 - INFO - Reading device information
20/016/2013 13:16:35 - INFO - Phone ready for flashmode operations.
20/016/2013 13:16:35 - INFO - Current device : ST18i - CB511V21ML - 1252-5986_R3I - 1248-9545_4.1.B.0.587 - WORLD-i_4.1.B.0.587
20/016/2013 13:16:35 - INFO - Start Flashing
20/016/2013 13:16:35 - INFO - Processing loader
20/016/2013 13:16:35 - INFO - Checking header
20/016/2013 13:16:35 - INFO - Flashing data
20/016/2013 13:16:35 - INFO - Ending flash session
20/016/2013 13:16:35 - ERROR - Read error :31 : A device attached to the system is not functioning.
20/016/2013 13:16:35 - ERROR - Error flashing. Aborted
20/016/2013 13:16:35 - INFO - Device connected in flash mode
Thanks for looking into this.
May sound stupid but I have just found the thanks button (really) to thank mihahn and alokbina whose guides were the one's I tried before joining here.
So this is your problem?
20/016/2013 13:16:35 - ERROR - Read error :31 : A device attached to the system is not functioning.
20/016/2013 13:16:35 - ERROR - Error flashing. Aborted
i havent see this before
but, try reinstall the driver and flashtool or check your cabel. or you can try another PC maybe
alund said:
So this is your problem?
20/016/2013 13:16:35 - ERROR - Read error :31 : A device attached to the system is not functioning.
20/016/2013 13:16:35 - ERROR - Error flashing. Aborted
i havent see this before
but, try reinstall the driver and flashtool or check your cabel. or you can try another PC maybe
Click to expand...
Click to collapse
Hi alund
Thanks, I have tried different cables and PCs and eventually got one working but not with the standard drivers, only with flashtool and Gordon's gate drivers.
I am not sure if the drivers I have are good or not (I found them on a download site) or if it is a problem with the phone not going into fastboot (so the system not knowing it needs the fb drivers) but when I try to install drivers for fb mode they are not recognised.
Another thing is that, from what was said and from a small mark on the phone, it may have been dropped.
I am still searching for answers but I have still not got any ideas where I need to start.
Does anyone think it is a particular issue (maybe the phone or maybe the pc/drivers)?
Thanks
AW: [Q] Help with ST18 bad flash.
try flashing a kernel only..maybe this will work...
rob rich said:
try flashing a kernel only..maybe this will work...
Click to expand...
Click to collapse
Hi
Thanks, it was worth a go but the result was the same.
If anyone has got any idea what it might be, it would be a big help so I could start searching for clues.
AW: [Q] Help with ST18 bad flash.
jordan0001 said:
Hi
Thanks, it was worth a go but the result was the same.
Click to expand...
Click to collapse
the same error in flashtool?
Crazyyyyyyyyyyyyyy...................
jordan0001 said:
Hi alund
Thanks, I have tried different cables and PCs and eventually got one working but not with the standard drivers, only with flashtool and Gordon's gate drivers.
I am not sure if the drivers I have are good or not (I found them on a download site) or if it is a problem with the phone not going into fastboot (so the system not knowing it needs the fb drivers) but when I try to install drivers for fb mode they are not recognised.
Another thing is that, from what was said and from a small mark on the phone, it may have been dropped.
Click to expand...
Click to collapse
Hi its really sounds crazy to you but believe me i have gone through this with my MINI..................... you have to find another MDPI device or RAY itself an added advantage............ just tick MTP in USB Connectivity and connect it to your another PC i mean try different PC....... let your PC install its drivers after that install Flashtool and now you are good to go its worked for me...........in my case i have installed my friends LWW drivers n its worked for me:good::good: i think you have to try.................... and plz do let me know if it worked happy flashing..........................
jesudas said:
Hi its really sounds crazy to you but believe me i have gone through this with my MINI..................... you have to find another MDPI device or RAY itself an added advantage............ just tick MTP in USB Connectivity and connect it to your another PC i mean try different PC....... let your PC install its drivers after that install Flashtool and now you are good to go its worked for me...........in my case i have installed my friends LWW drivers n its worked for me:good::good: i think you have to try.................... and plz do let me know if it worked happy flashing..........................
Click to expand...
Click to collapse
Thanks jesudas - you're a star!
Not completely solved but I've got the right drivers installed so I'm pretty sure it is a phone problem.
Can anyone tell me if it is possible to change the USB settings of my phone without using the touchscreen (maybe using a pc connection or something)?
Gr8..........
jordan0001 said:
Thanks jesudas - you're a star!
Not completely solved but I've got the right drivers installed so I'm pretty sure it is a phone problem.
Can anyone tell me if it is possible to change the USB settings of my phone without using the touchscreen (maybe using a pc connection or something)?
Click to expand...
Click to collapse
Hey you are most welcome buddy.......................:laugh::laugh: i think you have to ggogle about ANDROID COMMANDER may be this will help you to solve your problem best of luck buddy.......................
Solved
Thanks for all of your help.
I downloaded fresh copies of flashtool and drivers and re-installed everything.
As I was setting administrator privileges I noticed that the start menu shortcut was pointing to the 32 bit version not 64.
As my system is 64 bit, I started up the right version and it flashed ok.
Re: [Q] Help with ST18 bad flash.
Please add solved in the title.
Hi I got SGP 321 LTE
I folowed the procedure up to 18,http://forum.xda-developers.com/xperia-tablet-z/development/root-sp321-ftf-10-5-1-0-283-t2873377
but it just couldnt get connected with the device, I have tried win 8.1,win 7 i XP it was everywhere the same, so I did flash recovery from the same page.
Enter TWRP and did backup to SD card.
Afterwords something really stupid , still in TWRP I did wiped all data on internal memory, factory reset.....and tried to instal CM11 with gapps ...
Guys the tablet is really dead, the screen will not go ON, only the LED is allive
flashtool says:
23/011/2014 13:11:22 - INFO - List of connected devices (Device Id) :
23/011/2014 13:11:22 - INFO - - USB\VID_0FCE&PID_0DDE\CB5A1RWK0G Driver installed : true
23/011/2014 13:11:22 - INFO - List of ADB devices :
23/011/2014 13:11:22 - INFO - - none
23/011/2014 13:11:22 - INFO - List of fastboot devices :
23/011/2014 13:11:22 - INFO - - CB5A1RWK0G
Is there any way to fix this? :crying:
korkis said:
Hi I got SGP 321 LTE
I folowed the procedure up to 18,http://forum.xda-developers.com/xperia-tablet-z/development/root-sp321-ftf-10-5-1-0-283-t2873377
but it just couldnt get connected with the device, I have tried win 8.1,win 7 i XP it was everywhere the same, so I did flash recovery from the same page.
Enter TWRP and did backup to SD card.
Afterwords something really stupid , still in TWRP I did wiped all data on internal memory, factory reset.....and tried to instal CM11 with gapps ...
Guys the tablet is really dead, the screen will not go ON, only the LED is allive
flashtool says:
23/011/2014 13:11:22 - INFO - List of connected devices (Device Id) :
23/011/2014 13:11:22 - INFO - - USB\VID_0FCE&PID_0DDE\CB5A1RWK0G Driver installed : true
23/011/2014 13:11:22 - INFO - List of ADB devices :
23/011/2014 13:11:22 - INFO - - none
23/011/2014 13:11:22 - INFO - List of fastboot devices :
23/011/2014 13:11:22 - INFO - - CB5A1RWK0G
Is there any way to fix this? :crying:
Click to expand...
Click to collapse
Have you tried holding volume + and power button, you should see one white flash keep holding and you should see three more flashes. If that worked you may be able to get into flash mode. (copied from another thread)
keijers said:
Have you tried holding volume + and power button, you should see one white flash keep holding and you should see three more flashes. If that worked you may be able to get into flash mode. (copied from another thread)
Click to expand...
Click to collapse
holding volume+ power button and pluq usb cable...3 white flashes and than different colour flash
and flastool says
23/046/2014 14:46:55 - INFO - Device connected in flash mode
23/047/2014 14:47:20 - INFO - Device disconnected
korkis said:
holding volume+ power button and pluq usb cable...3 white flashes and than different colour flash
and flastool says
23/046/2014 14:46:55 - INFO - Device connected in flash mode
23/047/2014 14:47:20 - INFO - Device disconnected
Click to expand...
Click to collapse
that's a start, try different ways. Like holding volume+ power untill 3 white flashes, then plug in to the usb. Or the other way around. It should work but you (maybe) have to try a lot of times.
keijers said:
that's a start, try different ways. Like holding volume+ power untill 3 white flashes, then plug in to the usb. Or the other way around. It should work but you (maybe) have to try a lot of times.
Click to expand...
Click to collapse
If i uderstood well and try what u say,,, what would happened? Will the tab boot up? Or will i be able to acces TWRP? Just to make sure where am i supposed to get...
Is there way how to flash nandroid backup in fastboot mode or flash mode thru the flashtool?
Sent from my One X using XDA Free mobile app
korkis said:
If i uderstood well and try what u say,,, what would happened? Will the tab boot up? Or will i be able to acces TWRP? Just to make sure where am i supposed to get...
Is there way how to flash nandroid backup in fastboot mode or flash mode thru the flashtool?
Sent from my One X using XDA Free mobile app
Click to expand...
Click to collapse
your tablet should get and stay in flash mode / fastboot, then you can flash the original firmware through flashtool. I don't think TWRP will ever startup...
keijers said:
your tablet should get and stay in flash mode / fastboot, then you can flash the original firmware through flashtool. I don't think TWRP will ever startup...
Click to expand...
Click to collapse
Awesome, thanks I made it work and my xperia is again alive, but now I got stuck at point 21. i did reboot the device after first flash, skip the set up, went to settings to enable usb debug, unknown sources i did even try to change MTP to MSC
and flastool says:
Device connected with USB debugging off
for 2011 devices line, be sure you are not in MTP mode
i have tried that 100 times and still no succes.... what am I doing wrong?
korkis said:
Awesome, thanks I made it work and my xperia is again alive, but now I got stuck at point 21. i did reboot the device after first flash, skip the set up, went to settings to enable usb debug, unknown sources i did even try to change MTP to MSC
and flastool says:
Device connected with USB debugging off
for 2011 devices line, be sure you are not in MTP mode
i have tried that 100 times and still no succes.... what am I doing wrong?
Click to expand...
Click to collapse
glad it's alive again! For that error at point 21 I can't help you. You've got to ask your question in that thread I guess!
korkis said:
Awesome, thanks I made it work and my xperia is again alive, but now I got stuck at point 21. i did reboot the device after first flash, skip the set up, went to settings to enable usb debug, unknown sources i did even try to change MTP to MSC
and flastool says:
Device connected with USB debugging off
for 2011 devices line, be sure you are not in MTP mode
i have tried that 100 times and still no succes.... what am I doing wrong?
Click to expand...
Click to collapse
ehh. What's exactly the problem?
Rootk1t said:
ehh. What's exactly the problem?
Click to expand...
Click to collapse
the problem is that eventhough the USB debug is ON, once the tablet goes OFF, the debug goes OFF as well...
25/054/2014 13:54:46 - INFO - Device connected with USB debugging on
25/054/2014 13:54:47 - INFO - Connected device : Sony Xperia Tablet Z
25/054/2014 13:54:47 - INFO - Installed version of busybox : N/A
25/054/2014 13:54:47 - INFO - Android version : 4.4.4 / kernel version : 3.4.0-perf-ge2ad053-00925-g7f21499 / Build number : 10.5.1.A.0.283
25/055/2014 13:55:26 - INFO - Selected Bundle for Sony Xperia Tablet Z (SGP321). FW release : 10.5.A.0.230. Customization : Customized_CE1
25/055/2014 13:55:26 - INFO - Preparing files for flashing
25/055/2014 13:55:28 - INFO - Please connect your device into flashmode.
25/055/2014 13:55:39 - INFO - Device disconnected
25/056/2014 13:56:25 - INFO - Device connected with USB debugging off
25/056/2014 13:56:25 - INFO - For 2011 devices line, be sure you are not in MTP mode
korkis said:
the problem is that eventhough the USB debug is ON, once the tablet goes OFF, the debug goes OFF as well...
25/054/2014 13:54:46 - INFO - Device connected with USB debugging on
25/054/2014 13:54:47 - INFO - Connected device : Sony Xperia Tablet Z
25/054/2014 13:54:47 - INFO - Installed version of busybox : N/A
25/054/2014 13:54:47 - INFO - Android version : 4.4.4 / kernel version : 3.4.0-perf-ge2ad053-00925-g7f21499 / Build number : 10.5.1.A.0.283
25/055/2014 13:55:26 - INFO - Selected Bundle for Sony Xperia Tablet Z (SGP321). FW release : 10.5.A.0.230. Customization : Customized_CE1
25/055/2014 13:55:26 - INFO - Preparing files for flashing
25/055/2014 13:55:28 - INFO - Please connect your device into flashmode.
25/055/2014 13:55:39 - INFO - Device disconnected
25/056/2014 13:56:25 - INFO - Device connected with USB debugging off
25/056/2014 13:56:25 - INFO - For 2011 devices line, be sure you are not in MTP mode
Click to expand...
Click to collapse
does it prevent you from flashing?
Rootk1t said:
does it prevent you from flashing?
Click to expand...
Click to collapse
exactely :good:
Hi guys, So the problem im having at the minute is im trying to flash it back to a a lower firmware but for some reason on flash tools im getting:
15/020/2015 11:20:36 - INFO - Device disconnected
15/020/2015 11:20:36 - INFO - Device connected with USB debugging on
15/020/2015 11:20:36 - ERROR - Cannot identify your device.
15/020/2015 11:20:36 - INFO - Selecting from user input
15/021/2015 11:21:48 - ERROR - You can only flash devices.
Ive actually installed EVERY single driver on the drivers list as I tried the Xperia Z2 drivers to begin with and they didnt work
Am I right in thinking that I can just choose the Z2 from the list that comes up or does flashtool have to actually recognize it?
Ive gone on to USB Connectivity and the only 2 options that I have are MTP and MSC, Ive enabled USB Debugging and allowed my Computer access, But it still wont work, Can anyone help me please?
Thanks.