Related
I don't take any credit for this I just discovered it here https://www.head-fi.org/threads/lg-v20-sound-quality.816024/page-189 and since I've never seen it mentioned at XDA I figured I would share it.
So I was playing around with my build.prop file (VS995) and I came across this line "audio.offload.pcm.16bit.enable=false". After some googling I came across that page at head-fi.org and learned that if you set "audio.offload.pcm.16bit.enable=true" it enables the Hi-Fi DAC to handle 16-bit content natively. By default the V20 is set to do this with 24-bit content only.
I can't speak for all formats but with the lossless flac files that I listen to it made an amazing difference in sound quality.
Tested on my VS995 13A stock rooted rom and on WETA 5.0.7 US99610h rom that I have running with dual boot patcher. It worked on both so chances are this works on all variants.
UPDATE:
I started to get curious about this DAC tweak so I decided to play around with my old V10, VS990 rooted stock rom. The build.prop on my V10 does not have the line "audio.offload.pcm.16bit.enable= (true or false)" so I added the line "audio.offload.pcm.16bit.enable=true", rebooted and viola. My V10 now sounds even better than before.
So this works on the V10 as well as the V20. Probably the V30 too, assuming root has been achieved.
Update: fixed
I did this and now my viper4android is not processing anymore
---------- Post added at 06:07 AM ---------- Previous post was at 05:54 AM ----------
dudeawsome said:
Update: fixed
I did this and now my viper4android is not processing anymore
Click to expand...
Click to collapse
Okay so it works but keep turning off and on
Using Viper4Android on the LG V20 undoes all the magic the ESS DAC performs.. It downsamples the audio to 16-bit/48kHz after the ESS DAC has upsampled everything to 32-bit/192kHz
Viper4Android increases the audio quality on most phones. However it is going to decrease the quality on any device running a dedicated DAC.
beavis5706 said:
Using Viper4Android on the LG V20 undoes all the magic the ESS DAC performs.. It downsamples the audio to 16-bit/48kHz after the ESS DAC has upsampled everything to 32-bit/192kHz
Viper4Android increases the audio quality on most phones. However it is going to decrease the quality on any device running a dedicated DAC.
Click to expand...
Click to collapse
Technically yes but viper4android is still a thing you can't miss with this device, no other playerapp can provide this lossless analog timbre equalizer and much other soundimprovements it can provide.
Poweramp and neutron are way behind what viper4android can do or reach in soundquality terms
I compared the tweak with the default settings its a improvement by a small margin yes (not really magic). but as its not compatible with viper4android this is a no go for me personally and for many other people too i guess
I disagree with your statement that viper4android is decreasing soundquality with this DAC, its a huge improvement in contrary you should try it out yourself dac by default sounds dull and unoptimized
Small tip: use viper4android in combination with neutron player this is where the real magic is.
jody2k said:
Technically yes but viper4android is still a thing you can't miss with this device, no other playerapp can provide this lossless analog timbre equalizer and much other soundimprovements it can provide.
Poweramp and neutron are way behind what viper4android can do or reach in soundquality terms
I compared the tweak with the default settings its a improvement by a small margin yes (not really magic). but as its not compatible with viper4android this is a no go for me personally and for many other people too i guess
I disagree with your statement that viper4android is decreasing soundquality with this DAC, its a huge improvement in contrary you should try it out yourself dac by default sounds dull and unoptimized
Small tip: use viper4android in combination with neutron player this is where the real magic is.
Click to expand...
Click to collapse
Very interesting I'm thinking about what your saying how Viper4Android doesn't work with this mod and I think I know why.
When audio.offload.pcm.16bit.enable=false the audio stream is being handled by Android, using Android's src converter and digital volume control. This also allows for Viper4Android functionality. When audio.offload.pcm.16bit.enable=true the audio stream is passed on to the ESS DAC directly, completely bypassing Android's audio processing. This is what I think is causing Viper4Android to lose functionality. Perhaps this is why LG chose to set audio.offload.pcm.16bit.enable=false in their rom. To increase functionality with other apps, albeit at the expense of audio quality.
Personally I like the way it sounds with audio.offload.pcm.16bit.enable=true and I'm gonna keep it that way. I have tried Viper4Android before and I know by my own ears that it did sound as good. At least not as pure which is what I prefer. So to each his own I guess
beavis5706 said:
Very interesting I'm thinking about what your saying how Viper4Android doesn't work with this mod and I think I know why.
When audio.offload.pcm.16bit.enable=false the audio stream is being handled by Android, using Android's src converter and digital volume control. This also allows for Viper4Android functionality. When audio.offload.pcm.16bit.enable=true the audio stream is passed on to the ESS DAC directly, completely bypassing Android's audio processing. This is what I think is causing Viper4Android to lose functionality. Perhaps this is why LG chose to set audio.offload.pcm.16bit.enable=false in their rom. To increase functionality with other apps, albeit at the expense of audio quality.
Personally I like the way it sounds with audio.offload.pcm.16bit.enable=true and I'm gonna keep it that way. I have tried Viper4Android before and I know by my own ears that it did sound as good. At least not as pure which is what I prefer. So to each his own I guess
Click to expand...
Click to collapse
okay it does work with the mod but it cuts in and out
jody2k said:
Technically yes but viper4android is still a thing you can't miss with this device, no other playerapp can provide this lossless analog timbre equalizer and much other soundimprovements it can provide.
Poweramp and neutron are way behind what viper4android can do or reach in soundquality terms
I compared the tweak with the default settings its a improvement by a small margin yes (not really magic). but as its not compatible with viper4android this is a no go for me personally and for many other people too i guess
I disagree with your statement that viper4android is decreasing soundquality with this DAC, its a huge improvement in contrary you should try it out yourself dac by default sounds dull and unoptimized
Small tip: use viper4android in combination with neutron player this is where the real magic is.
Click to expand...
Click to collapse
While you might disagree based on your opinion, the fact is Viper4Android does indeed downsample audio. Go back into that same headfi.org thread he mentions and there will be people who conducted tests that show that. You cannot get bit perfect audio quality out of V4A because the V4A driver downsamples (V4A doesn't support HiFi audio), the audio.
This is why I tend to stay away from V4A. Sure, it makes the audio "sound" better but you're running the audio through so much processing things will get lost. V4A is great for when you have devices without a dedicated DAC. But, if your phone has a dedicated DAC or you have a DAC connected via OTG, it's best to go without V4A
---------- Post added at 01:38 PM ---------- Previous post was at 01:32 PM ----------
beavis5706 said:
I don't take any credit for this I just discovered it here https://www.head-fi.org/threads/lg-v20-sound-quality.816024/page-189 and since I've never seen it mentioned at XDA I figured I would share it.
So I was playing around with my build.prop file (VS995) and I came across this line "audio.offload.pcm.16bit.enable=false". After some googling I came across that page at head-fi.org and learned that if you set "audio.offload.pcm.16bit.enable=true" it enables the Hi-Fi DAC to handle 16-bit content natively. By default the V20 is set to do this with 24-bit content only.
I can't speak for all formats but with the lossless flac files that I listen to it made an amazing difference in sound quality.
Tested on my VS995 13A stock rooted rom and on WETA 5.0.7 US99610h rom that I have running with dual boot patcher. It worked on both so chances are this works on all variants.
UPDATE:
I started to get curious about this DAC tweak so I decided to play around with my old V10, VS990 rooted stock rom. The build.prop on my V10 does not have the line "audio.offload.pcm.16bit.enable= (true or false)" so I added the line "audio.offload.pcm.16bit.enable=true", rebooted and viola. My V10 now sounds even better than before.
So this works on the V10 as well as the V20. Probably the V30 too, assuming root has been achieved.
Click to expand...
Click to collapse
Yeah, I have been using this tweak since the 990 got rooted. Works WONDERFULLY. Anything that can be done to et around the Android mixer is worth it to me. Bit perfect audio all the way around with this tweak.
---------- Post added at 01:39 PM ---------- Previous post was at 01:38 PM ----------
beavis5706 said:
I don't take any credit for this I just discovered it here https://www.head-fi.org/threads/lg-v20-sound-quality.816024/page-189 and since I've never seen it mentioned at XDA I figured I would share it.
So I was playing around with my build.prop file (VS995) and I came across this line "audio.offload.pcm.16bit.enable=false". After some googling I came across that page at head-fi.org and learned that if you set "audio.offload.pcm.16bit.enable=true" it enables the Hi-Fi DAC to handle 16-bit content natively. By default the V20 is set to do this with 24-bit content only.
I can't speak for all formats but with the lossless flac files that I listen to it made an amazing difference in sound quality.
Tested on my VS995 13A stock rooted rom and on WETA 5.0.7 US99610h rom that I have running with dual boot patcher. It worked on both so chances are this works on all variants.
UPDATE:
I started to get curious about this DAC tweak so I decided to play around with my old V10, VS990 rooted stock rom. The build.prop on my V10 does not have the line "audio.offload.pcm.16bit.enable= (true or false)" so I added the line "audio.offload.pcm.16bit.enable=true", rebooted and viola. My V10 now sounds even better than before.
So this works on the V10 as well as the V20. Probably the V30 too, assuming root has been achieved.
Click to expand...
Click to collapse
Yeah, I have been using this tweak since the 990 got rooted. Works WONDERFULLY. Anything that can be done to et around the Android mixer is worth it to me. Bit perfect audio all the way around with this tweak.
lyrical1278 said:
While you might disagree based on your opinion, the fact is Viper4Android does indeed downsample audio. Go back into that same headfi.org thread he mentions and there will be people who conducted tests that show that. You cannot get bit perfect audio quality out of V4A because the V4A driver will ALWAYS use the Android mixer which downsamples, or upsamples depending on the file's quality, the audio.
This is why I tend to stay away from V4A. Sure, it makes the audio "sound" better but you're running the audio through so much processing things will get lost. V4A is great for when you have devices without a dedicated DAC. But, if your phone has a dedicated DAC or you have a DAC connected via OTG, it's best to go without V4A
Click to expand...
Click to collapse
Well we can have a eternal discussion about this,"adiophiles" vs audio equalizer enthosiastics" viper4android is the best thing we have if you're a heavy equalizer user
It doesn't get better than that for android devices atm => Well... maybe with a hardware equalizer directly controlled from the kernel and DAC chip, there were some mods of that in the past with the wolfson dac chip from old android devices
For my personal use I cannot miss viper4android, clean default DAC sound is sounding dull for my "audeze insine 20 inears" for example
Poweramp and neutron does not the job well enough, not by far compared to viper4android
Technical speaking 16bit vs 32 bit rate is an improvement, but only by a small margin for my ears it's not worth letting go V4A
What DID improve the DAC was forcing the dac in high gain mode (other mod on this forum), this was a significant improvement imo, also audible in MP3's not only flac
jody2k said:
Well we can have a eternal discussion about this,"adiophiles" vs audio equalizer enthosiastics" viper4android is the best thing we have if you're a heavy equalizer user
It doesn't get better than that for android devices atm => Well... maybe with a hardware equalizer directly controlled from the kernel and DAC chip, there were some mods of that in the past with the wolfson dac chip from old android devices
For my personal use I cannot miss viper4android, clean default DAC sound is sounding dull for my audeze insine 20 inears for example
Poweramp and neutron does not the job well enough
Click to expand...
Click to collapse
Here is the thing, you're speaking to opinion. I'm speaking to technical fact. When you use V4A, any audio you use is merely being amplified by the DAC and not being processed by it. Why do you think V4A doesn't work with the mod enabled? It's because Android is being set to run 16 bit audio through the DAC for processing and amplification. Thus, V4A isn't even touching the audio with this mod.
So, if V4A isn't touching 16-bit audio with this mod, then it's not even touching 24-bit audio by default. So it does the only thing it can do, it downsamples (since it downsamples any audio above 16/44 by default anyway, whereas Android's mixer upsamples to the max capability of the DAC). I cannot speak to what you feel is dull and such. That's your truth based on your musical ears.
All I am saying is this, V4A is nothing more but an EQ. A VERY GOOD one at that. If I didn't have the V20 or the Dragonfly Black, I would still be using V4A. But I don't because I have those tools at my disposal. Grab poweramp Alpha or Ainur and you will see the DAC come to life. V4A, and anything after this is my opinion, doesn't do anything close to what an app that lets the DAC do its job can do.
Installing V4A on this phone, again, my opinion is a waste of the full abilities of the DAC.. Using it just turns the DAC into an amplifier instead of allowing it to be the thing that processes audio IN ADDITION TO amplification.
Didn't know I could enjoy music on my phone without viper. All my mp3s/flac sound more lively. To my knowledge Power amp 3 still downsamples. Is the availability of the built-in equalizer a good trade off for the lost sample size?
Edit: Both viper and Dolby are broken with this mod
mookiexl said:
Didn't know I could enjoy music on my phone without viper. All my mp3s/flac sound more lively. To my knowledge Power amp 3 still downsamples. Is the availability of the built-in equalizer a good trade off for the lost sample size?
Edit: Both viper and Dolby are broken with this mod
Click to expand...
Click to collapse
You could try blackplayer... It doesn't downsample. I use that because it also has an EQ and when I use my VE Monks, I need to tune the bass down
lyrical1278 said:
You could try blackplayer... It doesn't downsample. I use that because it also has an EQ and when I use my VE Monks, I need to tune the bass down
Click to expand...
Click to collapse
Apparently the equalizer attempts to downsample once activated and you get no sound with this tweak. Oh well I'm good knowing I'm actually getting the most out the DAC at all times.
mookiexl said:
Didn't know I could enjoy music on my phone without viper. All my mp3s/flac sound more lively. To my knowledge Power amp 3 still downsamples. Is the availability of the built-in equalizer a good trade off for the lost sample size?
Edit: Both viper and Dolby are broken with this mod
Click to expand...
Click to collapse
While this phone without viper sounds night and day better than any phone I've heard so far, viper still sounds the best with Poweramp imo
jody2k said:
What DID improve the DAC was forcing the dac in high gain mode (other mod on this forum), this was a significant improvement imo, also audible in MP3's not only flac
Click to expand...
Click to collapse
Forcing it into High impedance does nothing for music quality.
Sent from my LG V20 using XDA Labs
BROKEN1981 said:
Forcing it into High impedance does nothing for music quality.
Click to expand...
Click to collapse
It really depends
Some headphones do like the extra power, headphones with low impedance who are still powerhungry for example. For my audeze isine 20 it made a difference
Some audiophile headphones like the extra voltage, fact they are low impedance doesn't always mean they are easy to drive
mookiexl said:
Apparently the equalizer attempts to downsample once activated and you get no sound with this tweak. Oh well I'm good knowing I'm actually getting the most out the DAC at all times.
Click to expand...
Click to collapse
Do you mean V4A becomes broken? Because I am using BlackPlayer right now with the EQ activated (Blackplayer's built in EQ, not V4A) and I am having no issues plus there is no downsampling.
But yes, as I said in an earlier post, V4A will become broken (as will most audio mods) if you use this build.prop mod because the DAC will be handling 16-bit audio processing directly instead of it being bypassed and handled by the audio mods.
---------- Post added at 03:44 AM ---------- Previous post was at 03:41 AM ----------
jody2k said:
It really depends
Some headphones do like the extra power, headphones with low impedance who are still powerhungry for example. For my audeze isine 20 it made a difference
Some audiophile headphones like the extra voltage, fact they are low impedance doesn't always mean they are easy to drive
Click to expand...
Click to collapse
High Impedance doesn't affect quality, it affects loudness. Since the amp in the V20 is actually pushing the headphones, the headphones are able to play louder. The quality is affected by the DAC whether h.i. is on or not. The quality doesn't change (unless you're into letting your audio clip), its just able to be louder.
lyrical1278 said:
Do you mean V4A becomes broken? Because I am using BlackPlayer right now with the EQ activated (Blackplayer's built in EQ, not V4A) and I am having no issues plus there is no downsampling.
But yes, as I said in an earlier post, V4A will become broken (as will most audio mods) if you use this build.prop mod because the DAC will be handling 16-bit audio processing directly instead of it being bypassed and handled by the audio mods.
---------- Post added at 03:44 AM ---------- Previous post was at 03:41 AM ----------
High Impedance doesn't affect quality, it affects loudness. Since the amp in the V20 is actually pushing the headphones, the headphones are able to play louder. The quality is affected by the DAC whether h.i. is on or not. The quality doesn't change (unless you're into letting your audio clip), its just able to be louder.
Click to expand...
Click to collapse
I'm not gona try to learn a donkey maths, i'm not talking about more volume it does more than just that. you clearly don't know what you're talking about and as in contrary you read on hi fi forums you don't know anything about soundquality or how it affects ears/headphones
You're an idiot yes that right I'm gona ignore you from now
jody2k said:
I'm not gona try to learn a donkey maths, i'm not talking about more volume it does more than just that. you clearly don't know what you're talking about and as in contrary you read on hi fi forums you don't know anything about soundquality or how it affects ears/headphones
You're an idiot yes that right I'm gona ignore you from now
Click to expand...
Click to collapse
It only makes it louder. Just people say it does more then that on HiFi fourms does not make it true.
Just Google ohms law. It has no effect on audio quality. If you think High impedance makes better audio quality, then you have no clue as to what you are talking about.
Sent from my LG V20 using XDA Labs
jody2k said:
Well we can have a eternal discussion about this,"adiophiles" vs audio equalizer enthosiastics" viper4android is the best thing we have if you're a heavy equalizer user
It doesn't get better than that for android devices atm => Well... maybe with a hardware equalizer directly controlled from the kernel and DAC chip, there were some mods of that in the past with the wolfson dac chip from old android devices
For my personal use I cannot miss viper4android, clean default DAC sound is sounding dull for my "audeze insine 20 inears" for example
Poweramp and neutron does not the job well enough, not by far compared to viper4android
Technical speaking 16bit vs 32 bit rate is an improvement, but only by a small margin for my ears it's not worth letting go V4A
What DID improve the DAC was forcing the dac in high gain mode (other mod on this forum), this was a significant improvement imo, also audible in MP3's not only flac
Click to expand...
Click to collapse
i dunno why you praise v4A that much, but here is what i tried. i used v4A on my v20 with Razer adaro DJ, KZ Z26, and puresound 260ohm earbuds. it sounds great until my brother in law bring his cord mojo and Fiio Q1 Mark II dac/amp. no matter setting that i use in V4A i always got "buzzing" on my headphone/iem/earbuds. the bass were enough but i lost the vocal and instrument quality. it get worse when i use fiio as a dac. restore my backup and testing without V4A. and guess what? every noise and buzz gone. fiio as amp really blowing every sound aspect from my v20. more soundstage, neutral sound, etc. so yeah, if you only use v20 and iem v4a might be best for you but once you use external amp or dac it became useless even downgrading sound performance.
alldine345 said:
i dunno why you praise v4A that much, but here is what i tried. i used v4A on my v20 with Razer adaro DJ, KZ Z26, and puresound 260ohm earbuds. it sounds great until my brother in law bring his cord mojo and Fiio Q1 Mark II dac/amp. no matter setting that i use in V4A i always got "buzzing" on my headphone/iem/earbuds. the bass were enough but i lost the vocal and instrument quality. it get worse when i use fiio as a dac. restore my backup and testing without V4A. and guess what? every noise and buzz gone. fiio as amp really blowing every sound aspect from my v20. more soundstage, neutral sound, etc. so yeah, if you only use v20 and iem v4a might be best for you but once you use external amp or dac it became useless even downgrading sound performance.
Click to expand...
Click to collapse
Buzzing from your ear buds?? Maybe you did something wrong badly
And you lost vocal and instrument quality yes let me guess what you did: you boosted the bass options without boosting the low mids, mids and high's because you don't know how equalizing works because your that kind of audiophile who strives after pure neutral sound.
Ofcourse the chord mojo is on a other league here it's alot better yes I tried it too but no equalization options soo i was bit dissapointed afterwards, i loved the pure sound it was giving tho and maybe the only dac i could use without EQ but then again there is so much potential lost ... So sad
If the mojo could be paired with a decent EQ then this would be majestic sound i agree
Tried several DAP's from sony the nwzx2 was the one who came closest maybe even better yes but damn the price of that thing
I don't know why you guys try to dishonor v4a it's really good and all about the settings you use
I don't have a V30 yet. Saving up for it right now. I do have an audio question though....
For a typical, non-Quad-DAC phone, I realize that an aux cable between the car's head unit and the phone's headphone jack should sound better than playing music via Bluetooth due to losses from Bluetooth.
With that said, with the V30, and using an aux cable to the radio's input jack...would enabling the Quad-DAC make any difference to the sound quality? I assume that the DAC and amplifier are designed for headphone use where headphones typically have no external power other than that provided by the signal. But, while using the aux cable and going through a car's amplified radio head unit, would the DAC give you anything above what the radio itself provides? Does the fact that the radio has a powered amp negate what the V30's DAC provides?
On a similar note...my old LG Optimus G Pro (currently my EDC phone) when connected to my car via Bluetooth...when I play a song on my phone, and then play the exact same MP3 file on an iPhone, the iPhone sounds better. Cleaner, clearer, better dynamic range and stereo separation, yet it's the identical MP3 source file. Is that a hardware issue between the 2 phones, or is it a software/firmware issue?
Good question. I haven't tried it in my vehicle yet. (I use thumb drives to listen to music in my truck.) I will try and report back. You can toggle the DAC on and off.
I'm interested in me too. I listen to music in the car via bluetooth. that is, V30 connected to the car stereo.
andygold said:
I don't have a V30 yet. Saving up for it right now. I do have an audio question though....
For a typical, non-Quad-DAC phone, I realize that an aux cable between the car's head unit and the phone's headphone jack should sound better than playing music via Bluetooth due to losses from Bluetooth.
With that said, with the V30, and using an aux cable to the radio's input jack...would enabling the Quad-DAC make any difference to the sound quality? I assume that the DAC and amplifier are designed for headphone use where headphones typically have no external power other than that provided by the signal. But, while using the aux cable and going through a car's amplified radio head unit, would the DAC give you anything above what the radio itself provides? Does the fact that the radio has a powered amp negate what the V30's DAC provides?
On a similar note...my old LG Optimus G Pro (currently my EDC phone) when connected to my car via Bluetooth...when I play a song on my phone, and then play the exact same MP3 file on an iPhone, the iPhone sounds better. Cleaner, clearer, better dynamic range and stereo separation, yet it's the identical MP3 source file. Is that a hardware issue between the 2 phones, or is it a software/firmware issue?
Click to expand...
Click to collapse
Tl;DR - aux will usually be better than BT. Make sure your source files are high quality. And lastly, USB transfer or stream will be the best quality in almost all scenerios.
Okay, a couple basics. DAC stands for Digital to Analog Converter. Your car system has a DAC for playing digital audio files. I suspect most decent car audio systems perform better DAC than most cell phones. While it may be better than most cell phones, I doubt our V30's would be better than most new car systems.
With Aux, your phone is doing the DAC and sending an analog signal to the car. Then you car is just amplifying (as per you eq sertings). With BT, your phone sends a digital signal, which is then run through the car DAC system.
Here's where it gets complicated. There are a few different codecs that can be used to compress the transfer, and then quality settings within them. In theory, BT can be a very high quality transfer with near 320kbps sound... BUT ... You get into compatibility issues. This would very likely be why the sound from the iPhone generated playback sounded better than the other phone; it is using a different codec or higher bitrate on compression. My post is already too long but search for BT codecs if you want more detail.
A few tips. Make sure your source file is good!
General convention is that a 128 is comparable to FM radio. 160 or 192 is generally felt to be similar to CD quality.
Check the setting on your music app. In spotify, both streaming and download bitrate settings can be bumped up. Jist be aware of your potential data and storage issues.
Conclusions:
Phone DAC won't come into play for BT transfer. Hopefully your car system has the codec compatibility for high quality transfer. If so, go with that. If not, then AUX will be better.
V30 DAC seems to be high quality, and will function for aux transfers. The car system will then apply analog effects (bass/treble or EQ boosts) during amplification. You will have to play with the settings to see what sounds best to your ears.
A final consideration: Take a look at USB cable connection. A modern car audio system will likely be able to take advantage of digital transfer via USB. This may take the form of seeing your phone as file storage or may allow for your phone to stream music. Either way, assuming a good quality car system, your car can playback your high quality files without any losses that come with BT. If the DAC in your car is better than the V30, then this will be best.
Sent from my LG-H933 using Tapatalk
Audio DAC on the V30 is mostly better than most car stereo converter. Heck, most laptop / desktop PC have lesser DAC than the V30.
BUT, in order to use it rightfully, you need high quality audio files. No matter how good is the DAC, playing 160kbps mp3 won't make a difference... Playing 24bits flac, on the other hand, will show you the difference between them all.
If you want, you can downlaod the sample on this site to test out the result:
http://www.eclassical.com/pages/24-bit-faq.html
That being said, the V30 pluged in the AUX will most likely sound better than mp3, as long as the sourde file are higher in quality.
Some of this stuff has already been mentioned, but here's my experience. I have a rooted V20 (waiting for bootloader unlock for US998 V30 before I buy it) with V4A. I also have a $4k custom audio system in my car with an amp, subwoofer, and aftermarket speakers. I love music and it's the only reason I've bought V20.
If you use BT, V30's DAC won't be used (as has been previously mentioned in this thread). If you use AUX, it will be. In my experience, AUX provides *far* better sound quality than BT. As far as Hi-Fi DAC, I discernibly notice a difference only with lossless audio; not so much with MP3. That difference, however, is enough for me to stick to the LG V* line and not switch to google pixel, which I would have done otherwise.
You should also keep in mind that not all cars will allow you to play audio through USB-C. Digital audio through Android is not nearly as widespread supported with car manufacturers as with iPhones.
If you have a good audio system in your car, you will be happy with the sound quality of your V30 through AUX, much more so than through BT.
Just for comparaison;
AptX as a bitrate of 352kbps
AptX HD as a bitrate of 576kbps
Mp3 @ 320kbps will stream with AptX with no lost,
Flac @ 16 bits have a bitrate around 900kbps (more or less, depending on many factors, but you can average on this)
Uncompress 16bits @ 44hz stereo is ~1400kbps
The Audio Dac of the V30 can run above this.
deroth said:
Some of this stuff has already been mentioned, but here's my experience. I have a rooted V20 (waiting for bootloader unlock for US998 V30 before I buy it) with V4A. I also have a $4k custom audio system in my car with an amp, subwoofer, and aftermarket speakers. I love music and it's the only reason I've bought V20.
If you use BT, V30's DAC won't be used (as has been previously mentioned in this thread). If you use AUX, it will be. In my experience, AUX provides *far* better sound quality than BT. As far as Hi-Fi DAC, I discernibly notice a difference only with lossless audio; not so much with MP3. That difference, however, is enough for me to stick to the LG V* line and not switch to google pixel, which I would have done otherwise.
You should also keep in mind that not all cars will allow you to play audio through USB-C. Digital audio through Android is not nearly as widespread supported with car manufacturers as with iPhones.
If you have a good audio system in your car, you will be happy with the sound quality of your V30 through AUX, much more so than through BT.
Click to expand...
Click to collapse
What is your opinion/experience with streaming?
nitramus said:
What is your opinion/experience with streaming?
Click to expand...
Click to collapse
Most online streaming sources utilize same compression as MP3, so I personally don't notice much difference whether HIFI DAC is on or off. I'm sure if I was using something like Tidal for streaming, which steams lossless audio, the difference would be there.
Hey guys I was wondering if anyone in this V30 forum could help me out. I am looking to get a new device and my main interest is audio. I use my phone as my daily mp3 player in my car via Bluetooth. I cannot find any real answers anywhere I look. I am stuck between the new S9 and the V30. My main question is, does the DAC work via Bluetooth? I know the Dolby Atmos will but its not that customizable (only a few pre-set options). Can someone explain the V30's capabilities (tuning, adjusting, customizing via Bluetooth) and if you feel the S9 would be a better option for my situation? All the vids and write-ups I could find don't help at all. Thanks for any feed back, much appreciated.
The Bluetooth is digital; the DAC won't benefit you when using Bluetooth.
when playing music through the bluetooth Galaxy s9 will be a much better choice. Even on the headphones with the dolby atmos activated is really very good.
I have used both the devices and unless you are going to root LG v30 to get viper4android or Dolby Atmos s9 is the one to go
If you already have some high quality head phones then may be you can give v30 a try
skit777 said:
when playing music through the bluetooth Galaxy s9 will be a much better choice. Even on the headphones with the dolby atmos activated is really very good.
Click to expand...
Click to collapse
why will S9 be a MUCH BETTER choice?
what makes S9 so awesome on bluetooth?
Because V30 is not the best for me in this respect and in s9 dolby atmos also works by bluetooth and really gives a great effect.
Beesvee said:
Hey guys I was wondering if anyone in this V30 forum could help me out. I am looking to get a new device and my main interest is audio. I use my phone as my daily mp3 player in my car via Bluetooth. I cannot find any real answers anywhere I look. I am stuck between the new S9 and the V30. My main question is, does the DAC work via Bluetooth? I know the Dolby Atmos will but its not that customizable (only a few pre-set options). Can someone explain the V30's capabilities (tuning, adjusting, customizing via Bluetooth) and if you feel the S9 would be a better option for my situation? All the vids and write-ups I could find don't help at all. Thanks for any feed back, much appreciated.
Click to expand...
Click to collapse
The Quad DAC is audio processor for wired components via the 3.5mm headset jack -- normally headphones but some have used auxiliary cable to connect to car stereo.
Has nothing to do with Bluetooth.
The quad DAC will give you the BEST audio possible. Period. But your headphones or car stereo must be physically connected to your V30.
Yes the V30 has also Bluetooth, just like every other Android phones for the past several years. But Bluetooth has nothing to do with headset jack.
No Bluetooth headset can match high quality wired headset with a quad DAC.
If you must use Bluetooth, then that's another question.
Sent via open market LG US998 V30/V30+
skit777 said:
Because V30 is not the best for me in this respect and in s9 dolby atmos also works by bluetooth and really gives a great effect.
Click to expand...
Click to collapse
dolby atmos is not even hardware... it's software and it has been ported to oreo.
at this moment you cannot match the v30's DAC's quality with any phone.
and music through bluetooth sound like s*** compared to how it sounds through a wire... (asuming you have a good source and, in some cases, you can physically hear the difference (i met people who were slighty deaf and they could not hear the differences))
you could try poweramp with it's effects and DVC.
Do not tell me stupid about some ports because they are hopeless. I had s9 plus and dolby atmos in s9 is not the same as in the ports for other devices. There is not the smallest comparison. Even on wired headphones with s9 sounds great, there is nothing missing from it. And do not say that the V30 is such a miracle in terms of music because it is not like that at all. It plays very well when the amplifier that fills up the sound is played, without it the s9 with the dolby listens more pleasantly.
skit777 said:
Do not tell me stupid about some ports because they are hopeless. I had s9 plus and dolby atmos in s9 is not the same as in the ports for other devices. There is not the smallest comparison. Even on wired headphones with s9 sounds great, there is nothing missing from it. And do not say that the V30 is such a miracle in terms of music because it is not like that at all. It plays very well when the amplifier that fills up the sound is played, without it the s9 with the dolby listens more pleasantly.
Click to expand...
Click to collapse
Skit, please don't drink-and-post. Put the keyboard down. Back away from the keyboard.
You're confusing two topics.
The LG V30 has far superior wired audio over any other mainstream cellphone. That's one of the calling cards. Nothing else is close. It's okay if you can't hear the difference; the S9 is better than anything you could buy a decade ago, and without really good cans (headphones), hardly anybody would notice. You won't notice with hyper-compressed 120Kbps mp3s, just as that "enhance photo" scene from the original Blade Runner was crap. But the V30 Quad-DAC really is the best... if your music was compressed with enough quality, your earphones are good enough and you're wired.
Not that kind of "wired" you are while writing your semi-coherent rants. The other kind.
Now to Bluetooth...
The LG V30 supports aptX bluetooth. So does the Samsung Galaxy S9. This is the top-end Bluetooth "codec", often coined "CD quality." Which really means, "better than FM radio, better than low-bitrate MP3, but not so great." Remember, CDs came out in 1982. Which was probably before you were born.
So what happens with the music? If you're listening via wired cans (the DAC), the Quad-DAC applies a lot of math (FFTs, smoothing, psycho acoustics) and tries to make the music as great as it can be. Roughly the equivalent of anti-aliasing an image. The S9 doesn't have all of that, so it will sound a smidge harsher, just a shade less accurate... but still better than anything a decade ago. And Bluetooth... on either one - the LG V30 and Samsung S9 have precisely exactly the same best-case aptX sound, because it's from your headphones, not the phone... will sound like something from three-and-a-half decades ago. Which was amazing at the time, and is good enough for an airplane, or low-cost earbuds, or if you're listing to hip-hop or rap, etc. But in those cases, why are you pontificating?
Wotta said:
Skit, please don't drink-and-post. Put the keyboard down. Back away from the keyboard.
You're confusing two topics.
The LG V30 has far superior wired audio over any other mainstream cellphone. That's one of the calling cards. Nothing else is close. It's okay if you can't hear the difference; the S9 is better than anything you could buy a decade ago, and without really good cans (headphones), hardly anybody would notice. You won't notice with hyper-compressed 120Kbps mp3s, just as that "enhance photo" scene from the original Blade Runner was crap. But the V30 Quad-DAC really is the best... if your music was compressed with enough quality, your earphones are good enough and you're wired.
Not that kind of "wired" you are while writing your semi-coherent rants. The other kind.
Now to Bluetooth...
The LG V30 supports aptX bluetooth. So does the Samsung Galaxy S9. This is the top-end Bluetooth "codec", often coined "CD quality." Which really means, "better than FM radio, better than low-bitrate MP3, but not so great." Remember, CDs came out in 1982. Which was probably before you were born.
So what happens with the music? If you're listening via wired cans (the DAC), the Quad-DAC applies a lot of math (FFTs, smoothing, psycho acoustics) and tries to make the music as great as it can be. Roughly the equivalent of anti-aliasing an image. The S9 doesn't have all of that, so it will sound a smidge harsher, just a shade less accurate... but still better than anything a decade ago. And Bluetooth... on either one - the LG V30 and Samsung S9 have precisely exactly the same best-case aptX sound, because it's from your headphones, not the phone... will sound like something from three-and-a-half decades ago. Which was amazing at the time, and is good enough for an airplane, or low-cost earbuds, or if you're listing to hip-hop or rap, etc. But in those cases, why are you pontificating?
Click to expand...
Click to collapse
Just to continue the point, Bluetooth audio still requires a DAC or Digital Analog Converter. However the DAC in use when using Bluetooth audio is in the head unit of your car stereo, not in your phone. When you play music via Bluetooth, your sending a digital signal to your "headphones" (in this case your car stereo), where it pulls the muscle of converting the digital signal into an analog waveform that can be played back by your speakers. This is why the same sound file sounds different when played back through your hi-fi system when compared to your car stereo. They use different DACs.
If I'm not mistaken (if I am please correct me), Dolby Atmos is software processing applied to the digital signal before it reaches the DAC, which is why it works over Bluetooth.
Im pretty sure people have made a big mistake in their recommendation to you. The LG V30 has the high quality bluetooth audio feature along with its Quad DAC. Not just wired audio will benefit from it. Its designed for Hi-Fi bluetooth too.
The V30 has Qualcomms new aptX HD Bluetooth Codec. Which Samsung does not. LG are still retaining their place at top of the Wireless leaderboard with this device.
Samsung obviously cannot have aptX if it does not have a Qualcomm processor or chipset.
Hindustani1990 said:
I have used both the devices and unless you are going to root LG v30 to get viper4android or Dolby Atmos s9 is the one to go
If you already have some high quality head phones then may be you can give v30 a try
Click to expand...
Click to collapse
Please don't post this BS information.
If you are running V4A, your Quad Dac is not working.
The music will have a down sample and an up sample.
V4A is for devices without a Quad Dac.
Sent from my LG-H932 using XDA Labs
Just get the V30 if you are looking for audio.
I've used the v30 before i got my s9+, the audio quality that s9 delivers is nothing compared to what i get from my V30,I still go back to my v30 when I have to listen to my favourite beats. The v30 has a hardware advantage over the samsung. And both the phones have Bluetooth 5.0 support so you won't have any troubles playing audio via Bluetooth, but if you are looking for a superrior audio quality get a LG v30 with a good set of wired earphones/headphones. Sorry for any grammatical errors, English isn't my first language.
skit777 said:
Because V30 is not the best for me in this respect and in s9 dolby atmos also works by bluetooth and really gives a great effect.
Click to expand...
Click to collapse
Surprised to hear Dolby Atmos on Bluetooth. It's has to do something with speakers.
Sheephunter9000 said:
I've used the v30 before i got my s9+, the audio quality that s9 delivers is nothing compared to what i get from my V30,I still go back to my v30 when I have to listen to my favourite beats. The v30 has a hardware advantage over the samsung. And both the phones have Bluetooth 5.0 support so you won't have any troubles playing audio via Bluetooth, but if you are looking for a superrior audio quality get a LG v30 with a good set of wired earphones/headphones. Sorry for any grammatical errors, English isn't my first language.
Click to expand...
Click to collapse
Also, since you wrote that post a few months ago, we now have DTS 3D Surround sound on rooted V30, since LG put the DTS framework in the phones with recent updates. DTS is available on both wired AND wireless (Bluetooth) connections.
Why rooted? Because even though the libs are there, for some reason LG hasn't yet enabled it on unrooted stock firmware. But it's still a fantastic development, as long as you have most recent firmware. @JohnFawkes is enabling it on his TWRP-flashable zips, so you don't need to anything except flash Magkisk before rebooting (which you would do anyway). If you are not using one of his zips, then use the linked Guide above.
ChazzMatt said:
The Quad DAC is audio processor for wired components via the 3.5mm headset jack -- normally headphones but some have used auxiliary cable to connect to car stereo.
Has nothing to do with Bluetooth.
The quad DAC will give you the BEST audio possible. Period. But your headphones or car stereo must be physically connected to your V30.
Yes the V30 has also Bluetooth, just like every other Android phones for the past several years. But Bluetooth has nothing to do with headset jack.
No Bluetooth headset can match high quality wired headset with a quad DAC.
If you must use Bluetooth, then that's another question.
Sent via open market LG US998 V30/V30+
Click to expand...
Click to collapse
DTS libs though lol, doubt s9 or really any phone has anything like that over bluetooth
Hello. also you have that after the upgrade to oreo the music on the headphones quieter game? I have headphones above 50ohm and before the upgrade could not be heard above level 65. Now turn up the volume to the max and it is still not as loud as it was before the upgrade on level 65. I did a full wipe.
did you flash KDZ with refurbished option selected in LG UP ?
I updated over LG bridge and after updated i make full wipe.
try LG UP and a KDZ file
Hello friends i want to buy V30 plus because it has DAC, my doubt is whether i can use 32ohms earphone? will this sound good. Because i could see LG V30 plus supporting only above 50 ohms. is it true? please help.
P.K.Shivaram said:
Hello friends i want to buy V30 plus because it has DAC, my doubt is whether i can use 32ohms earphone? will this sound good. Because i could see LG V30 plus supporting only above 50 ohms. is it true? please help.
Click to expand...
Click to collapse
The quad DAC will try to make any earphones sound good. I have the OneMore triple driver earphones and they sound great.
However, around 50 ohms or more, the quad DAC unleashes HIM (high impedance mode).
Been discussed incessantly in other threads, so not going to reiterate here.
You can also activate this HIM mode with a short 3.5mm accessory plug that has enough ohms resistance (Google is your friend) or by rooting. @Whiskeyomega has standalone mods down in apps section that will do that.
https://forum.xda-developers.com/lg-v30/themes/whiskeyomegas-v30-sound-mods-t3757115
Also included in his Boombox ROM.
Ok I searched for Solution on google, it seems no body else is facing this issue. So here is my problem I migrated on to v30 from v20 and I noticed that whenever i play a song with quad dac on there is a very audible static noise in the background, like if the mic on or a better example would it feels like the song is being played on a radio.. where along with song there is a hint of crackle and white noise. My V20 never had this problem.
Is anyone else facing the issue, BTW I am on Philippine oreo KDZ, and will LG cover the warranty or should i wait and flash Indian Oreo to claim warranty??
did you try different audio sources, headphones, also try some speakers
taus90 said:
Ok I searched for Solution on google, it seems no body else is facing this issue. So here is my problem I migrated on to v30 from v20 and I noticed that whenever i play a song with quad dac on there is a very audible static noise in the background, like if the mic on or a better example would it feels like the song is being played on a radio.. where along with song there is a hint of crackle and white noise. My V20 never had this problem.
Is anyone else facing the issue, BTW I am on Philippine oreo KDZ, and will LG cover the warranty or should i wait and flash Indian Oreo to claim warranty??
Click to expand...
Click to collapse
Look: you ever used the "high performance" mode of the WCD9xxx in-built DAC of any previous Android phone ?
This raises up the output but also comes with the cost of higher "white noise" / static, etc. - this in turn is able to drive headphones with a high impedance Ω
The same applies to the dedicated "quad dac" - it has high output by default and thus is to be experienced best with "high quality" (well, most high quality headphones have higher impedance than the very cheap headphones).
There's a noticable difference for me when switching between e.g. the EP630, Xiaomi Pistons and the provided B & O Headphones that came along with the V30.
So there is NO issue and there is not really a solution but to use it in the way that it was meant to be used
tl;dr
What @iRS_ wrote (other headphones with higher impedance)
iRS_ said:
did you try different audio sources, headphones, also try some speakers
Click to expand...
Click to collapse
I did like, never had this problem on my Lg V20
taus90 said:
I did like, never had this problem on my Lg V20
Click to expand...
Click to collapse
i am asking if you tried all this on v30, NOT v20 ?
zacharias.maladroit said:
Look: you ever used the "high performance" mode of the WCD9xxx in-built DAC of any previous Android phone ?
This raises up the output but also comes with the cost of higher "white noise" / static, etc. - this in turn is able to drive headphones with a high impedance Ω
The same applies to the dedicated "quad dac" - it has high output by default and thus is to be experienced best with "high quality" (well, most high quality headphones have higher impedance than the very cheap headphones).
There's a noticable difference for me when switching between e.g. the EP630, Xiaomi Pistons and the provided B & O Headphones that came along with the V30.
So there is NO issue and there is not really a solution but to use it in the way that it was meant to be used
tl;dr
What @iRS_ wrote (other headphones with higher impedance)
Click to expand...
Click to collapse
If a DAC has distortion and audible static interference then its not doing its job. In simple layman terms, Switching on DAC should improve sound stage and frequency response and it is noticeable on any even basic headphones. Like I mentioned in my post I have Lg V20 too, and the DAC on that phone doesn't have any of the issue which i mentioned about my V30, to which you say is not an issue. Also Headphone (Mi Piston) is not an issue.. coz the same headphones works perfectly on V20..
taus90 said:
If a DAC has distortion and audible static interference then its not doing its job. In simple layman terms, Switching on DAC should improve sound stage and frequency response and it is noticeable on any even basic headphones. Like I mentioned in my post I have Lg V20 too, and the DAC on that phone doesn't have any of the issue which i mentioned about my V30, to which you say is not an issue. Also Headphone (Mi Piston) is not an issue.. coz the same headphones works perfectly on V20..
Click to expand...
Click to collapse
well, it could be due to how the driver & kernel is compiled (so it would be an out-of-the-box issue) - I've experienced this kind of increase in static noise on the Z5 once going from fstack-protector-regular to fstack-protector-strong (more functions protected or "tainted" in that case)
https://outflux.net/blog/archives/2014/01/27/fstack-protector-strong/
https://lwn.net/Articles/584225/
https://en.wikipedia.org/wiki/Buffer_overflow_protection
Since the stock kernel is built that way by default the audio output quality could be somewhat worse compared to V20 (if there the kernel was compiled with fstack-protector-regular).
I can clearly hear how there's some distortion and audible static noise when the screen is off, quad dac enabled and changing volume (up or down) - the amp first is gone, the output is much more silent and there sound is less clear - more static can be heard
I've attributed this to the quality of the audio tracks I'm listening to - since with fully digitally created tracks this didn't seem to occur that much.
Also there's one particular issue I had forgotten:
Once connecting the Xiaomi Hybrid Pro and having Quad DAC disabled (so the stock WCD94xx used) either on left or right channel (every several seconds) there is solely (no other output) very loud static noise while playing music [similar to the static on old-ass TVs where only static is being shown and similar sound played],
when enabling quad dac/ES9028PRO it's gone. No matter what audio track is being played this was happening - I wasn't sure whether this was a software or hardware issue and since this was only happening with one particular type of headphones/IEMs I keep the phone so far.
Since you mention that the static noise appears along music output I doubt it's a similar issue you're observing.
taus90 said:
I did like, never had this problem on my Lg V20
Click to expand...
Click to collapse
Yes I did.. And by v20 i mean i tried all Flac, same mp3 on both the devices, wired speakers, headphones, so it doesnt seem the problem is with any of the external devices, , tried different music player, same problem it has to be issue with V30's dac or the headphone jack its just when i start playing a song with Hifi option on, the static and light crackles starts and when the song finishes playing or I pause the song the noise stops after like 15 seconds or if i turn off the dac the noise stops immediately. But toggling hifi option on and off without any music playing the issue doesnt exist, its just when a song starts and DAC kicks the issue appears, so i doubt its even headphone jack
zacharias.maladroit said:
well, it could be due to how the driver & kernel is compiled (so it would be an out-of-the-box issue) - I've experienced this kind of increase in static noise on the Z5 once going from fstack-protector-regular to fstack-protector-strong (more functions protected or "tainted" in that case)
https://outflux.net/blog/archives/2014/01/27/fstack-protector-strong/
https://lwn.net/Articles/584225/
https://en.wikipedia.org/wiki/Buffer_overflow_protection
Since the stock kernel is built that way by default the audio output quality could be somewhat worse compared to V20 (if there the kernel was compiled with fstack-protector-regular).
I can clearly hear how there's some distortion and audible static noise when the screen is off, quad dac enabled and changing volume (up or down) - the amp first is gone, the output is much more silent and there sound is less clear - more static can be heard
I've attributed this to the quality of the audio tracks I'm listening to - since with fully digitally created tracks this didn't seem to occur that much.
Also there's one particular issue I had forgotten:
Once connecting the Xiaomi Hybrid Pro and having Quad DAC disabled (so the stock WCD94xx used) either on left or right channel (every several seconds) there is solely (no other output) very loud static noise while playing music [similar to the static on old-ass TVs where only static is being shown and similar sound played],
when enabling quad dac/ES9028PRO it's gone. No matter what audio track is being played this was happening - I wasn't sure whether this was a software or hardware issue and since this was only happening with one particular type of headphones/IEMs I keep the phone so far.
Since you mention that the static noise appears along music output I doubt it's a similar issue you're observing.
Click to expand...
Click to collapse
I wish i could have tested on indian nougat when i had it, to see if it is oreo related issue, now i have to wait for Indian Oreo to see if that rom has the solution. I think Ill probably send it to LG to fix it while its under warranty
Stock Nougat, just going to start the bootloader unlock process, but sonically it's been flawless, orgasmic actually, with Sennheiser 6xx's, Etymotic HF2's and ER4's as well as BT to a UE Boom. Only the occasional crackle because my HF2's cabling is getting old, so sadly I'd think you have a bad unit.
Even I am experiencing the exact same , I'm on Indian Oreo kdz. When I turn on high impedance mode with sennhieser hd 598 and then connect it to my ath e 40 , I get a continuous hiss throughout the song.. sometimes it's irritating really.. I want to ask if someone who has rooted and using whiskyomega mod having same issues ?
By the way I don't get it on hd 598 , it probably dampens it..
Bupreno said:
Even I am experiencing the exact same , I'm on Indian Oreo kdz. When I turn on high impedance mode with sennhieser hd 598 and then connect it to my ath e 40 , I get a continuous hiss throughout the song.. sometimes it's irritating really.. I want to ask if someone who has rooted and using whiskyomega mod having same issues ?
By the way I don't get it on hd 598 , it probably dampens it..
Click to expand...
Click to collapse
The HD598 is 50 ohms (more resistance) while the E40 is merely 12 ohms, with a dynamic driver, I am guessing fairly sensitive. I wouldn't use HIM with earphones like that in the first place. That said, V30 is known for having a very low noise floor, so I wouldn't expect hiss, even with HIM and sensitive earphones.
Which music player do you use and what is your music source? Unfortunately V30 will upsample 44.1Khz sources (i.e. all CDs and most streaming sources) to 48KHz before sending it to the DAC. This should not be audible in most cases, but a few people are able to hear it when using very sensitive IEMs (typically balanced armature drivers). It is described in the opening post of the thread linked below:
https://www.head-fi.org/threads/music-apps-tips-and-tricks-for-the-lg-v30.868978/
The way around it is to use a music player that bypasses the standard Android audio path, such as UAPP or Neutron, both of which use their own audio driver that sends music directly to the ESS DAC.
Another possible explanation is if some EQ or other processing in your music player is messing with the data before it reaches the DAC. If you try playing with UAPP using Bit-perfect mode, that's a great way to determine if it is a hardware problem (which is possible) or something in the digital audio path. You can download a free trial using the link below:
http://www.extreamsd.com/index.php/uapp-trial
TheDannemand said:
The HD598 is 50 ohms (more resistance) while the E40 is merely 12 ohms, with a dynamic driver, I am guessing fairly sensitive. I wouldn't use HIM with earphones like that in the first place. That said, V30 is known for having a very low noise floor, so I wouldn't expect hiss, even with HIM and sensitive earphones.
Which music player do you use and what is your music source? Unfortunately V30 will upsample 44.1Khz sources (i.e. all CDs and most streaming sources) to 48KHz before sending it to the DAC. This should not be audible in most cases, but a few people are able to hear it when using very sensitive IEMs (typically balanced armature drivers). It is described in the opening post of the thread linked below:
https://www.head-fi.org/threads/music-apps-tips-and-tricks-for-the-lg-v30.868978/
The way around it is to use a music player that bypasses the standard Android audio path, such as UAPP or Neutron, both of which use their own audio driver that sends music directly to the ESS DAC.
Another possible explanation is if some EQ or other processing in your music player is messing with the data before it reaches the DAC. If you try playing with UAPP using Bit-perfect mode, that's a great way to determine if it is a hardware problem (which is possible) or something in the digital audio path. You can download a free trial using the link below:
http://www.extreamsd.com/index.php/uapp-trial
Click to expand...
Click to collapse
Will try those apps out.. i always use the in built music app. And ath e 40 sound just amazing with the DAC, that kinda quality just gives me a high , so I can't let it go.. I never imagined those earphones could be so good !!
taus90 said:
Ok I searched for Solution on google, it seems no body else is facing this issue. So here is my problem I migrated on to v30 from v20 and I noticed that whenever i play a song with quad dac on there is a very audible static noise in the background, like if the mic on or a better example would it feels like the song is being played on a radio.. where along with song there is a hint of crackle and white noise. My V20 never had this problem.
Is anyone else facing the issue, BTW I am on Philippine oreo KDZ, and will LG cover the warranty or should i wait and flash Indian Oreo to claim warranty??
Click to expand...
Click to collapse
This sounds similar to what I experienced with my V30S using Beyerdynamic iDX200 headphones with the extension cable design*.
At first I thought I had received a defective V30S. Then I found the problem was limited to those particular headphones with their included extension cable. With the extension cable removed, and with any other headphones, the V30S audio quality problem disappeared. And the iDX200 sound fine on my other phone, as long as the extension cable connection is clean (it is prone to signal degradation by contamination).
My guess is that the V30 system that measures load impedance on the 3.5mm jack has some kind of anomaly related to imdedance/VSWR imposed by the connection of the iDX200 extension cable, even if that connection is clean.
Try different headphones.
(* The iDX200 cable is too short by itself, it has to be used with a short extension, either the included one or another.)
...
taus90 said:
Ok I searched for Solution on google, it seems no body else is facing this issue. So here is my problem I migrated on to v30 from v20 and I noticed that whenever i play a song with quad dac on there is a very audible static noise in the background, like if the mic on or a better example would it feels like the song is being played on a radio.. where along with song there is a hint of crackle and white noise. My V20 never had this problem.
Is anyone else facing the issue, BTW I am on Philippine oreo KDZ, and will LG cover the warranty or should i wait and flash Indian Oreo to claim warranty??
Click to expand...
Click to collapse
I have found a solution!!
Go to hifi settings in balance section, reduce the volume from left and right to as low as possible, I've kept it zero and just raise the volume to your liking..
In my case the hiss has reduced drastically to the point I can ignore it ! Hope this works for you!
TheDannemand said:
The HD598 is 50 ohms (more resistance) while the E40 is merely 12 ohms, with a dynamic driver, I am guessing fairly sensitive. I wouldn't use HIM with earphones like that in the first place. That said, V30 is known for having a very low noise floor, so I wouldn't expect hiss, even with HIM and sensitive earphones.
Which music player do you use and what is your music source? Unfortunately V30 will upsample 44.1Khz sources (i.e. all CDs and most streaming sources) to 48KHz before sending it to the DAC. This should not be audible in most cases, but a few people are able to hear it when using very sensitive IEMs (typically balanced armature drivers). It is described in the opening post of the thread linked below:
https://www.head-fi.org/threads/music-apps-tips-and-tricks-for-the-lg-v30.868978/
The way around it is to use a music player that bypasses the standard Android audio path, such as UAPP or Neutron, both of which use their own audio driver that sends music directly to the ESS DAC.
Another possible explanation is if some EQ or other processing in your music player is messing with the data before it reaches the DAC. If you try playing with UAPP using Bit-perfect mode, that's a great way to determine if it is a hardware problem (which is possible) or something in the digital audio path. You can download a free trial using the link below:
http://www.extreamsd.com/index.php/uapp-trial
Click to expand...
Click to collapse
THANKS A TON!! uapp works like a charm , zero noise and never before heard sound quality !!! I'm Loveñ it !! I couldn't configure neutron though
Bupreno said:
THANKS A TON!! uapp works like a charm , zero noise and never before heard sound quality !!! I'm Loveñ it !! I couldn't configure neutron though
Click to expand...
Click to collapse
Great! I'm glad you like it.
And interesting that it solved the noise problem too. That most likely means it was the artifacts caused by upsampling 44.1KHz to 48KHz (performed by Android's standard audio path) that you were able to hear.
UAPP is my favorite too, both for its features, its ability to play redbook (44.1KHz/16bit) without upsampling, and for its user interface. Neutron can do that too, but I could never understand its user interface.
In UAPP, under HiRes Driver flags, make sure to select the MQA flag if you play MQA files or streams. This will ensure that the ESS Sabre DAC is fully utilitized for MQA playback.
Correction- high impedance mode when switched on, even this app makes the noise , I had tried without the high impedance mode..?
but still ,otherwise quality seems better than the stock ! ?
Bupreno said:
Correction- high impedance mode when switched on, even this app makes the noise , I had tried without the high impedance mode..?
but still ,otherwise quality seems better than the stock ! ?
Click to expand...
Click to collapse
Something is wrong, that just doesn't make sense. If anything, there should be less noise (if the theory of HIM activating more DAC units is true). And in any case is the V30 known for having very little noise, in any of its modes.
How do you trigger HIM? If you plug your headphones/earphones in directly (no adapters of extension cables) is volume loud enough?
If you play music through an impedance adapter, then I suggest you don't. Unplug the adapter once you've achieved HIM, then plug your headphones/earphones into the extension cable (or TRS adapter).
And if you don't need HIM to drive your headphones/earphones loud enough, I suggest you don't need it for maximum sound quality. The V30 was designed to adapt its output mode to the connected headphones/earphones. While it fails to do that correctly with planar magnetic ones, it does it correctly on most others.
Still, unless you are playing through an impedance adapter (which will change the frequency response of your headphones/earphones) or through a poor quality extension cable or TRS adapter, I cannot see a good reason why HIM should have more noise.
Ath e40- when i connect without adapter, loud enough, okayish sound.. Just like any other device..
There was this one time the high impedance mode got activated by mistake, mustve been a glitch! but my god the sound !! - more punch, more soundstage , even minute details audible , more dynamic!! way more louder! Then i searched around and found a way to trigger it everytime by using ath cable extention and sennhieser hd 598 , then unplug senn without unplugging the cable And then connecting e40.
This time i could hear the hiss.. Whenever i plug the earphones only, theres no hiss, and quality is okay.. even though the hifi option is on. i guess it just uses the snapdragon dac or whatever.
to summarize-
if i connect the cable first and then e 40 - sound is louder and okay.
only e 40- sound is okay.
senn and then e40 (to enter high impedance mode,probably uses the quad dac for real this time)- sound is amazing!!!! but with hiss...
I've only used the stock music player uptil now.
now i use uapp- it still gives me the hiss when high impedance is on. otherwise the sound is a bit better than stock music player.