Somehow my radio is either dead or switched of. Using *#*#4636#*#* I can enter the phone menu but the "Turn on radio" button does nothing. I tried several modems and reinstalling LeMax2-CN-ARoMA_28s-V4_15112017_by_CBG and installing Small_EUI. Even managed to get my phone bricked in the process (unbricked using: https://www.gizmochina.com/2016/11/20/leeco-x820-max-2-super-unbrick-guide/). After unbricking the phone still doesn't connect to network. Using *#*#4636#*#* I read: GSM service: Radio off; Network type: Unknown, Unknown. Tried "Selecting radio bands" but setting [Band mode 6] and [USA band] both give unsuccessful. I'm now running the unbrick rom: LeMax2_x820_QFIL_androidbrick (some dev version I think). Wifi is working fine. All suggestions on how to turn my radio back on or establish it is truly dead are welcome.
awjkok said:
Somehow my radio is either dead or switched of. Using *#*#4636#*#* I can enter the phone menu but the "Turn on radio" button does nothing. I tried several modems and reinstalling LeMax2-CN-ARoMA_28s-V4_15112017_by_CBG and installing Small_EUI. Even managed to get my phone bricked in the process (unbricked using: https://www.gizmochina.com/2016/11/20/leeco-x820-max-2-super-unbrick-guide/). After unbricking the phone still doesn't connect to network. Using *#*#4636#*#* I read: GSM service: Radio off; Network type: Unknown, Unknown. Tried "Selecting radio bands" but setting [Band mode 6] and [USA band] both give unsuccessful. I'm now running the unbrick rom: LeMax2_x820_QFIL_androidbrick (some dev version I think). Wifi is working fine. All suggestions on how to turn my radio back on or establish it is truly dead are welcome.
Click to expand...
Click to collapse
Have you tried LTE Discovery from the play store? Or "network"...
https://play.google.com/store/apps/details?id=de.mangelow.network
Was it working before? What happened that it turned off? Is your sim card / sim tray in and with active service?
Supertacomonkeyexplosion said:
Have you tried LTE Discovery from the play store? Or "network"...
https://play.google.com/store/apps/details?id=de.mangelow.network
Was it working before? What happened that it turned off? Is your sim card / sim tray in and with active service?
Click to expand...
Click to collapse
It was working normally. SIM is in tray and found by Le Max 2, SIM pincode is accept, I get the message no network.
I'm not sure what happend, in the morning there was some update, I couldn't see what. After that I made a phonecall, i restarted the phone and the radio went dead.
Solution for u
1. Open settings in your phone tap on about phone tap 5 times on build number.
2. Come back to the settings and you can find Developer options. Tap on it.
3. Tap "ON" and enable "USB debugging"
4. Download adb
5. Install the same
6. Connect your phone to PC through your charger cable.
(your phone will be detected by PC at this step. If not download the drivers from same site)
7. A popup "Allow USB debugging" appears on your phone screen. Tap ok
8. In your PC, open command prompt and enter
adb reboot bootloader
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
Geekmylife said:
1. Open settings in your phone tap on about phone tap 5 times on build number.
2. Come back to the settings and you can find Developer options. Tap on it.
3. Tap "ON" and enable "USB debugging"
4. Download adb
5. Install the same
6. Connect your phone to PC through your charger cable.
(your phone will be detected by PC at this step. If not download the drivers from same site)
7. A popup "Allow USB debugging" appears on your phone screen. Tap ok
8. In your PC, open command prompt and enter
adb reboot bootloader
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
Click to expand...
Click to collapse
Thank you for your clear instructions. I followed them but no success, yet. I will try again if the problem still exists after I flashed a stock ROM, 19s or better. Difficult to find an unmodified one.
Similar problem here with Le Max 2 - 6/128 GB
Hello, i also have problems to get mobile network. Bought the phone used from private person in Austria. I tried almost everything, even a special windows programm to individually activate / deactived LTE, 3G and GSM frequencies, nothing helped, then I left the phone alone some months...
...and now I flashed several roms which have extra baseband / modem files to flash, but it did not help - but even now ruined my mobile network connection completely. LTE discovery says "Potential eCSFB issue detected". Now I flashed resurrection and get System UI crashes and in TWRP it wants a f*** password which I always could solve by setting display security to none which is impossible now when I can't start the system, so I can't flash the backup from data partition and at the moment I don't feel like adb sideload again with no idea how to solve the problem. I think I throw it into the drawer again - I really really hate this phone would appreciate any help
this is the old thread: https://forum.xda-developers.com/le-max-2/help/mobile-network-problems-le-max-2-6gb-t3507500
I have got the same problem and in India, neither Vodafone nor Airtel or JIO works with the phone. No solution.
Related
Hi folks,
I'm desperately searching for some help to get my chinese F9300 / MT6577 back to live. What happened?
Yesterday I've booted into the standard installed boot manager (vol + and power on) to figure out whether or not it offered an option to install a zip. As it only offered to modes (recovery mode and factory mode) and a reboot option, I've decided just to leave the bootmanager by selecting 'reboot'. The deviced rebooted, but fell into a boot loop. On boot it automatically starts recovery mode, at the bottom of the screen a white bar appears, then the display goes off and the phone reboots, endlessly...
But with the combination Vol+ and power on I still can access the boot manager. When selecting 'factory mode' I get the option to run a bunch of tests, and in this mode I still have access to the phone via ADB. By running adb shell and entering 'su' at the prompt I also get root access.
Beside that, there is no way I can access the phone to push another ROM to it. In Odin the device doesn't show up, SP Flash Tool doesn't recognize the device and 'adb push' doesn't have any result as it ends with 'insufficient permissions'. To make things worse, it seems the extra SD-card isn't mounted... :crying:
Any options how to proceed...?
Greetz, Ronald
Some more info... after a night of trial and (a lot of) error it seems the phone goes into meta mode for a second or two (battery in, keep the middle button pressed and plug in the USB connector). During those 1 or 2 second it shows up as COM5 and SP Flash Tool recognizes it. Sadly enough then the connection to the phone drops again...
How can I force the phone to remain connected in this notorious meta mode...?
Any help, tips and tricks are welcome!
Ronald
Sent from my HTC Vision using xda app-developers app
try repair this by volcano box.. your problem is finally solve...
Hm, I don't think so. The tool costs more than the actual phone
Sent from my HTC Vision using xda app-developers app
make it
rbouwens said:
Hm, I don't think so. The tool costs more than the actual phone
Sent from my HTC Vision using xda app-developers app
Click to expand...
Click to collapse
but you can make more money by the tool for repairing all friends china phones and androids.
its the best tool for chinese:good:
Aqui lo tienes todo
rbouwens said:
Hi folks,
I'm desperately searching for some help to get my chinese F9300 / MT6577 back to live. What happened?
Yesterday I've booted into the standard installed boot manager (vol + and power on) to figure out whether or not it offered an option to install a zip. As it only offered to modes (recovery mode and factory mode) and a reboot option, I've decided just to leave the bootmanager by selecting 'reboot'. The deviced rebooted, but fell into a boot loop. On boot it automatically starts recovery mode, at the bottom of the screen a white bar appears, then the display goes off and the phone reboots, endlessly...
But with the combination Vol+ and power on I still can access the boot manager. When selecting 'factory mode' I get the option to run a bunch of tests, and in this mode I still have access to the phone via ADB. By running adb shell and entering 'su' at the prompt I also get root access.
Beside that, there is no way I can access the phone to push another ROM to it. In Odin the device doesn't show up, SP Flash Tool doesn't recognize the device and 'adb push' doesn't have any result as it ends with 'insufficient permissions'. To make things worse, it seems the extra SD-card isn't mounted... :crying:
Any options how to proceed...?
Greetz, Ronald
Click to expand...
Click to collapse
Look at Here : .movilesdualsim.com/foro/threads/22396-Backup-firmware-SMARPHONE-F9300-mtk6577
Before write www
rbouwens said:
Some more info... after a night of trial and (a lot of) error it seems the phone goes into meta mode for a second or two (battery in, keep the middle button pressed and plug in the USB connector). During those 1 or 2 second it shows up as COM5 and SP Flash Tool recognizes it. Sadly enough then the connection to the phone drops again...
How can I force the phone to remain connected in this notorious meta mode...?
Any help, tips and tricks are welcome!
Ronald
Sent from my HTC Vision using xda app-developers app
Click to expand...
Click to collapse
most mt6577 devices would go into this mode even without a battery, the reason why it goes off after one or two seconds is that its not recieving any command from spflash tool, i suggest you find the proper firmware of your device load it up in spflashtool after selecting the proper scatter file for your device just click on download, spflashtool would now start to scan all usb ports for your device connected now this is the time to connect your device and after connecting it would show up as comXX on spflashtool and flashing will imimediately start. if successful youll see a green circle and your device will go off of meta mode immadietely after flashing
I read the post on http://forum.xda-developers.com/showthread.php?t=2380700 but it is not working...:crying::crying:
Firstly I was having SamFlare V5 installed on my phone with CWM 6.0.3.0 then i tried to update to CWM 6.0.4.4 which was not working then again i replaced with older one. Now SIM cards are not getting detected and SIM MANAGEMENT from settings in disabled and when i checked in ENGINEERING MODE in CDS INFORMATION i found that RADIO is TURNED OFF...
Then i tried to install Canvas 4 Stock ROM but same problem persists...:crying::crying::crying:
Plz Help!!!
TIA...
nimishshah1508 said:
I read the post on http://forum.xda-developers.com/showthread.php?t=2380700 but it is not working...:crying::crying:
Firstly I was having SamFlare V5 installed on my phone with CWM 6.0.3.0 then i tried to update to CWM 6.0.4.4 which was not working then again i replaced with older one. Now SIM cards are not getting detected and SIM MANAGEMENT from settings in disabled and when i checked in ENGINEERING MODE in CDS INFORMATION i found that RADIO is TURNED OFF...
Then i tried to install Canvas 4 Stock ROM but same problem persists...:crying::crying::crying:
Plz Help!!!
TIA...
Click to expand...
Click to collapse
Watch this video tutorial - http://youtube.com/watch?v=8ZEVDwcCVzY
Sent from my Micromax A116 using XDA Premium 4 mobile app
RE:
I have watched this video and tried same but problem is in his case the radio is on but in my case radio is off and sim state is also not ready as shown in previously attached image!!! and while typing list box is not also opening and when i click on send AT command android will toast "AT command is failed to send"
RE:
I have watched this video and tried same but problem is in his case the radio is on but in my case radio is off and sim state is also not ready as shown in previously attached image!!! and while typing list box is not also opening and when i click on send AT command android will toast "AT command is failed to send"
[solved] radio off problem in mtk devices
hi, atlast i have found a solution of the "radio off" problem. It will definitely work...........just follow my instructions............
1. First of all you need to have the stock rom for your phone which you can easily find by googling.
2. Now run the sp flash tool in your pc.
3. click on the "scatter loading" botton and select the .txt file by browsing your downloaded stock rom.
4. Now click the "format" option on top of the flash tool.
5. Now switch off your phone and connect it to your pc via usb cable and press the up/down volume bottons for detecting.
6. once detected, your phone will be formatted.
7. now disconnect your phone from pc and close the sp tool. Then repeat the steps from 2 to 3.
8. Now click on the "download" option on top of the sp flash tool.
9. and again connect your phone and make it detected in the same process described earlier.
10. once the flashing is completed you will see a green o .
11. now disconnect your phone and switch it on, and the radio of your phone will be turned on.
12. also you need to rewrite the imei nos going to engineer mode by simply dialing *#3646633#*#*
Guys, I worked hard to find this solution so, if this process works please make a little donation to my sbi account 30449335478
Can you made back up of your IMEI ? Onceday I Already Same Question.before doing anythings.fortunately i backed up my IMEI.So if You not backed up.then no answer for your questions.
Puspendu said:
hi, atlast i have found a solution of the "radio off" problem. It will definitely work...........just follow my instructions............
1. First of all you need to have the stock rom for your phone which you can easily find by googling.
2. Now run the sp flash tool in your pc.
3. click on the "scatter loading" botton and select the .txt file by browsing your downloaded stock rom.
4. Now click the "format" option on top of the flash tool.
5. Now switch off your phone and connect it to your pc via usb cable and press the up/down volume bottons for detecting.
6. once detected, your phone will be formatted.
7. now disconnect your phone from pc and close the sp tool. Then repeat the steps from 2 to 3.
8. Now click on the "download" option on top of the sp flash tool.
9. and again connect your phone and make it detected in the same process described earlier.
10. once the flashing is completed you will see a green o .
11. now disconnect your phone and switch it on, and the radio of your phone will be turned on.
12. also you need to rewrite the imei nos going to engineer mode by simply dialing *#3646633#*#*
Guys, I worked hard to find this solution so, if this process works please make a little donation to my sbi account 30449335478
Click to expand...
Click to collapse
Great work. My problem solved :good:
Puspendu said:
hi, atlast i have found a solution of the "radio off" problem. It will definitely work...........just follow my instructions............
1. First of all you need to have the stock rom for your phone which you can easily find by googling.
2. Now run the sp flash tool in your pc.
3. click on the "scatter loading" botton and select the .txt file by browsing your downloaded stock rom.
4. Now click the "format" option on top of the flash tool.
5. Now switch off your phone and connect it to your pc via usb cable and press the up/down volume bottons for detecting.
6. once detected, your phone will be formatted.
7. now disconnect your phone from pc and close the sp tool. Then repeat the steps from 2 to 3.
8. Now click on the "download" option on top of the sp flash tool.
9. and again connect your phone and make it detected in the same process described earlier.
10. once the flashing is completed you will see a green o .
11. now disconnect your phone and switch it on, and the radio of your phone will be turned on.
12. also you need to rewrite the imei nos going to engineer mode by simply dialing *#3646633#*#*
Guys, I worked hard to find this solution so, if this process works please make a little donation to my sbi account 30449335478
Click to expand...
Click to collapse
Really thank u man, i had this problem with my bq e5 fhd and now solve it. Thank u!!!!! Greetings from spain!!
radio of zenfone 2 laser fix
i have zenfone 2 laser wich radio was off i cannot turn on radio please help
Puspendu said:
hi, atlast i have found a solution of the "radio off" problem. It will definitely work...........just follow my instructions............
1. First of all you need to have the stock rom for your phone which you can easily find by googling.
2. Now run the sp flash tool in your pc.
3. click on the "scatter loading" botton and select the .txt file by browsing your downloaded stock rom.
4. Now click the "format" option on top of the flash tool.
5. Now switch off your phone and connect it to your pc via usb cable and press the up/down volume bottons for detecting.
6. once detected, your phone will be formatted.
7. now disconnect your phone from pc and close the sp tool. Then repeat the steps from 2 to 3.
8. Now click on the "download" option on top of the sp flash tool.
9. and again connect your phone and make it detected in the same process described earlier.
10. once the flashing is completed you will see a green o .
11. now disconnect your phone and switch it on, and the radio of your phone will be turned on.
12. also you need to rewrite the imei nos going to engineer mode by simply dialing *#3646633#*#*
Guys, I worked hard to find this solution so, if this process works please make a little donation to my sbi account 30449335478
Click to expand...
Click to collapse
Man many thanks for your post finally got it working
Lenovo K6/K6 Power (Karate)Lenovo K6/K6 Power features a 5” 1080P IPS LCD display, giving a pixel density of ~441 PPI. Under the hood sits a Qualcomm Snapdragon 430 SoC, which utilises a 1.4 GHz octa-core CPU, an Adreno 505 GPU and 2 or 3 GB of RAM. The 16 GB internal storage version packs 2 GB of system RAM, the 32 GB, has 3 GB. The primary camera is capable of capturing images at 13 MP, the secondary at 8 MP. The whole 145g package is powered by a non-removable 4000mAh battery.*
Here is the guide for locking/unlocking your bootloader and flash custom recovery .
*Your Warranty will be void after unlocking bootloader*
What You need
A Laptop/PC
ADB Drivers
TWRP recovery
Some Patience
For Unlocking Your Bootloader :
First of all Install ADB drivers In Your Laptop/PC , Link is Here
https://forum.xda-developers.com/showthread.php?t=2588979
Now Go to Settings of Your Phone , Scroll Down and go to About Phone And Click on Build Number Until Your Developer Options Is enabled .
Now go to the Developer Options and turn on USB debugging and OEM unlocking.
Connect Your Mobile To your Pc through a USB cable.
Open ADB folder on Your Pc ( It will be in Local Disk C on your My files ) .
Right click + Press Shift in Adb folder , a popup will open , choose 'open command window here' .
Write Commands
Code:
adb reboot bootloader
(It should reboot your phone to fastboot , if not you must have done something wrong)
Code:
fastboot -i 0x17ef oem unlock-go
(This will unlock your bootloader and it will wipe your internal storage So better to backup first)
Done. Your phone will be rebooted and Your Bootloader is Unlocked.
For Flashing TWRP :
Download the twrp for Lenovo k6/k6 power (karate) from official twrp site.
Place it in the adb folder and rename it to recovery.img .
Now run these command
Code:
adb reboot bootloader
Code:
fastboot -i 0x17ef flash recovery recovery.img
OR
Code:
fastboot flash recovery recovery.img
Done Recovery is flashed , Now You can Flash anything with the Help of TWRP recovery.
If You want to lock Your Bootloader again :
Use the same process as above , and use command
Code:
adb reboot bootloader
Code:
fastboot oem lock
It should relock Your Bootloader.
Any query about unlocking bootloader or root , feel free to ask here.
Can you please help me with install and use aircrack-ng and metasploit in my Lenovo k6 power.
@dr.bathman
AkashBahetra said:
@dr.bathman
Click to expand...
Click to collapse
Added your thread.
hii
twrp asking for password??
write password to decrypt.?
any idea??
amit.tiger12 said:
hii
twrp asking for password??
write password to decrypt.?
any idea??
Click to expand...
Click to collapse
go to WIPE > FORMAT DATA > TYPE yes
firemax13 said:
go to WIPE > FORMAT DATA > TYPE yes
Click to expand...
Click to collapse
Yep. Got that.. Lenovo stock ROM encrypts device after clearing data or every factory reset..
It doesn't happens with custom ROMs..
Is it necessary to type 0x17ef, i.e. Block ID??
AFAIK, Mostly I type Fastboot OEM Unlock or in case of Motorola, Enter key and for flashing, just Fastboot flash ......
I have k33a42 2gb ram/16 gb K6 Power and Nougat 7.0 (K33_S229_170908_ROW)
Is this method also valid for my phone?
Is there any way to reset boot loader settings to their original state?
Hello,
I have Lenovo K6 Power (K33a42, 32GB, 3GB RAM)
I had accidentally selected USA band in *#*#4636#*#* . Since then, I was only getting signal in one of the selected 4G SIMs, the 2nd SIM was without network. My phone was updated to latest Nougat 7.0 prior to this problem (build S229, July security patch).
To solve the USA band problem, I flashed original ROM with help of Lenovo Moto Smart Assistant 3.2.0.9 (in hopes of reviving the networks). It downloaded S156 (Marshmallow 6.0.1) by default, which I flashed onto device successfully. Still the network problem was not solved, the 2nd sim still did not show any network.
Later, I found this link :
Code:
cnet dot com / forums/discussions/accidentally-selected-usa-band-in-moto-x-play/
so to try the solution I downloaded Platform Tools from Android Developers website :
Code:
developer dot android dot com /studio/releases/platform-tools.html
(Please adjust the above links correctly, XDA did not allow me to post direct links since this is my first post)
and as per the instructions tried these commands:
Code:
adb reboot bootloader
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
Now, the signals did show up on both sims upon reboot, but I realised I lost VoLTE. None of the 4g sims were able to connect to VoLTE. I tried Network Settings Reset, APN settings reset, Restart, updated again to Nougat latest build S229 from phone's Software Update menu, nothing worked.
I also have a minor problem, upon reboot the 1st sim instantly shows network bars, the 2nd sim shows zero bars. Yet inside 'Phone Status' menu, network is shown as connected and even SMSes are received. Putting on Airplane Mode helps, but this is annoying, as I will have to deal with this bug each time I restart.
Can anyone please help? I want my phone's boot loader to be back to default network settings, and both my networks to work like when the phone is new.
I have a lenovo k6 power. I have done
fastboot erase modemst1
fastboot erase modemst2
fastboot erase cache
But after that my phone isn't detecting sim cards. Someone have a solution for this?
hello guys
seems like when i am unlocking my bootloader is very different.
i did follow this tutorial: https://www.youtube.com/watch?v=icMaiZRiugQ&t=171s
but my results are different, seems i can't unlock my bootloader
been searching, reading and watching any possible way but i cant pull this through
can someone please help?
in the tutorial, all is false, but mine is different, and after that, stucks on fastboot
sevenfolds said:
hello guys
seems like when i am unlocking my bootloader is very different.
i did follow this tutorial: https://www.youtube.com/watch?v=icMaiZRiugQ&t=171s
but my results are different, seems i can't unlock my bootloader
been searching, reading and watching any possible way but i cant pull this through
can someone please help?
in the tutorial, all is false, but mine is different, and after that, stucks on fastboot
Click to expand...
Click to collapse
As what we see you need to follow the instruction here in xda because some nuub's people posting fake slash real slash lol things.
I can't help you now because I'm not using k6 power
firemax13 said:
As what we see you need to follow the instruction here in xda because some nuub's people posting fake slash real slash lol things.
I can't help you now because I'm not using k6 power
Click to expand...
Click to collapse
okay bro lol, thanks i'm done. aex now.
Hi, does this method works if I already updated device to the latest official android N?
flashing twrp is not working
on the adb menu says its finished but the device says its still flashing and when i try to use recovery its still the lenovo recovery
---------- Post added at 03:13 PM ---------- Previous post was at 03:11 PM ----------
[/COLOR]
iamvm007 said:
i have same problem , have you got solution?
Click to expand...
Click to collapse
AravindN said:
I have a lenovo k6 power. I have done
fastboot erase modemst1
fastboot erase modemst2
fastboot erase cache
But after that my phone isn't detecting sim cards. Someone have a solution for this?
Click to expand...
Click to collapse
have you got solution? i have same problem
Gonime said:
flashing twrp is not working
on the adb menu says its finished but the device says its still flashing and when i try to use recovery its still the lenovo recovery
Click to expand...
Click to collapse
I'm also experiencing this. Did I screw up somewhere?
Gonime said:
flashing twrp is not working
on the adb menu says its finished but the device says its still flashing and when i try to use recovery its still the lenovo recovery
Click to expand...
Click to collapse
goblin95 said:
I'm also experiencing this. Did I screw up somewhere?
Click to expand...
Click to collapse
Just after flashing the recovery (the last step), hold the power button, and the volume up button until your device reboots to a screen where you can select recovery option.
The trick is, don't let the device boot to the system, since it flashes the stock recovery and you will have to do it all over again. boot directly to recovery after flashing a custom recovery.
btw, I was on the last update (some S31) stock Nougat 7.0.
Got Unlocked and Twrp Running with this method, including my last step. Hope to see some custom ROM working without issues with it.
little confession here
Well I got this device from a relative and she says it hangs like hell, I was in a habit of getting the back cover out and pulling the battery. forgot about that here and removed the back panel with full force. luckily only some plastic bits came off. That's what happen when I keep jumping in all the forum flashing all kinds of device for my peeps. :laugh::laugh:
Sai SD said:
Hello,
I have Lenovo K6 Power (K33a42, 32GB, 3GB RAM)
I had accidentally selected USA band in *#*#4636#*#* . Since then, I was only getting signal in one of the selected 4G SIMs, the 2nd SIM was without network. My phone was updated to latest Nougat 7.0 prior to this problem (build S229, July security patch).
To solve the USA band problem, I flashed original ROM with help of Lenovo Moto Smart Assistant 3.2.0.9 (in hopes of reviving the networks). It downloaded S156 (Marshmallow 6.0.1) by default, which I flashed onto device successfully. Still the network problem was not solved, the 2nd sim still did not show any network.
Later, I found this link :
Code:
cnet dot com / forums/discussions/accidentally-selected-usa-band-in-moto-x-play/
so to try the solution I downloaded Platform Tools from Android Developers website :
Code:
developer dot android dot com /studio/releases/platform-tools.html
(Please adjust the above links correctly, XDA did not allow me to post direct links since this is my first post)
and as per the instructions tried these commands:
Code:
adb reboot bootloader
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
Now, the signals did show up on both sims upon reboot, but I realised I lost VoLTE. None of the 4g sims were able to connect to VoLTE. I tried Network Settings Reset, APN settings reset, Restart, updated again to Nougat latest build S229 from phone's Software Update menu, nothing worked.
I also have a minor problem, upon reboot the 1st sim instantly shows network bars, the 2nd sim shows zero bars. Yet inside 'Phone Status' menu, network is shown as connected and even SMSes are received. Putting on Airplane Mode helps, but this is annoying, as I will have to deal with this bug each time I restart.
Can anyone please help? I want my phone's boot loader to be back to default network settings, and both my networks to work like when the phone is new.
Click to expand...
Click to collapse
Modemst 1 and Modemst 2 means your Imei of sim 1 and sim 2.
Go to phone and type *#06# and it will show you the imei.
It must be null as you erased it.
Since they both are same,you wont have signal in both sims.
I have a problem connecting to Blutooth. I bought a car 2DIN radio for android. My phone turns on blutooth and connects to a call without a phone call. My radio with other smartphones connects seamlessly, has a problem with my phone only. My phone connects properly with the handsfree, with the speaker and other devices, just does not want to connect with my radio. I had an original Image, now I changed to MUI, but it is the same.
Is it really so difficult to repair if no one else has encountered such a problem?
Help
I'm fighting for 3 days and I do not know where I'm making a mistake. I was looking for a solution for bluetooth connection with 2DIN radio. I found the image in EUI 5.8 15S still works well. I had TWRP installed so there was no problem, I found the image I installed. Unfortunately bluetooth does not work. I wanted to install MIUI so I downloaded the image and here my problem starts. I am in TWRP unfortunately I can not access the phone memory. I will start everything from scratch. I will do everything as described:
I have ADB installed on my PC
on the phone I enter the system developer set
in the directory where I have downloaded twrp with shift PPM and the command window opens
adb devices command - correct answer
adb reboot command bootloader - telefin into bootloader mode
fastboot oem unlock command - correct answer
fastboot flash twrp twrp.img - install twrp
button + volume and power - twrp mode
in the twrp install button - and again the same I can not access the memory.
If I choose the memory, I have 0 mg memory and OTG memory
What I do is not where the error is.
wojt_wc said:
Help
I'm fighting for 3 days and I do not know where I'm making a mistake. I was looking for a solution for bluetooth connection with 2DIN radio. I found the image in EUI 5.8 15S still works well. I had TWRP installed so there was no problem, I found the image I installed. Unfortunately bluetooth does not work. I wanted to install MIUI so I downloaded the image and here my problem starts. I am in TWRP unfortunately I can not access the phone memory. I will start everything from scratch. I will do everything as described:
I have ADB installed on my PC
on the phone I enter the system developer set
in the directory where I have downloaded twrp with shift PPM and the command window opens
adb devices command - correct answer
adb reboot command bootloader - telefin into bootloader mode
fastboot oem unlock command - correct answer
fastboot flash twrp twrp.img - install twrp
button + volume and power - twrp mode
in the twrp install button - and again the same I can not access the memory.
If I choose the memory, I have 0 mg memory and OTG memory
What I do is not where the error is.
Click to expand...
Click to collapse
When you start it, is TWRP asking for a password? If it does, that means your phone is encrypted, which, for example, is the default for Indian firmwares. It's a bug, but not the end of the world. You have to hit cancel at the password prompt and restart recovery. It will eventually start without asking for a password and then you'll have access to the internal memory. Once, I had to restart TWRP about 10 times until this worked, so you have to be patient.
Thanks a lot. Actually I had to start again and it was OK. But now I have a bigger problem. I downloaded the picture MIUI 9. The installation ran smoothly. MIUI 9 has been installed but I can not take over the configuration. Even though the SIM card is inserted it does not see it. Can not find no IMEI. Can not set up MI Acccount. The phone is hot all the time and it's still on Mi Account. Can you stop it? Can I upload another image?
Yesterday at a late hour I managed to run everything on a regular basis on SmailSUI. I reinstalled the memory cleaner and it works fine. All the time I'm waiting for MIUI 9. As you work on this image you can check if BT is working properly. At me mixed with different images from this began. So far I have not found a system that works properly BT. When connected to another Android BT connects without a phone. You can not receive or call BT.
Thanks again for your help.
Info:
Xiaomi Redmi 9 Pro EEA (I think)
Model: M2003J6A1G
MIUI version: MIUI Global 12.5.4.0 (RJWMIXM) Stable
Android version: 11 RKQ.200826.002
I used the command line while trying to flash my ROMs.
Attached the last ROM I flashed.
First I tried to root my xiaomi, enabled debug usb, unblocked OEM and put phone in fastboot, connected the phone to the pc and unlocked it with the official program, downloaded some random sdk tools, picked a ROM "Redmi 9 S Global" and tried to modify it with magisk, then I flashed my phone with the modified ROM, I noticed it was the wrong ROM only after a fastboot bootloop, so I flashed the correct Redmi 9 Pro EEA ROM and used recovery mode to do a factory reset "Wipe Data", it entered a screen that stated "Your device is locked" followed by two buttons, one for putting my mi account password, the other for connecting to wi-fi, but it was set to airplane mode and I couldn't press anything other that the switch to activate wi-fi that didn't work, I then did a second factory reset and 4G started working, so i could unlock my phone, after booting everything up I see that every time I attempt to do a phonecall my phone immediatly terminates it, and my wi-fi doesn't activate, not recognizing any network and shutting itself off when exiting the Wi-fi setting screen.
I did a third factory reset but not from recovery mode, from the settings menu, it didn't change anything.
My phone is now unlocked but not working properly.
What can I do to fix this issues and possibly root my phone more safely without transforming it into a brick?
George Browns said:
Info:
Xiaomi Redmi 9 Pro EEA (I think)
Model: M2003J6A1G
MIUI version: MIUI Global 12.5.4.0 (RJWMIXM) Stable
Android version: 11 RKQ.200826.002
I used the command line while trying to flash my ROMs.
Attached the last ROM I flashed.
First I tried to root my xiaomi, enabled debug usb, unblocked OEM and put phone in fastboot, connected the phone to the pc and unlocked it with the official program, downloaded some random sdk tools, picked a ROM "Redmi 9 S Global" and tried to modify it with magisk, then I flashed my phone with the modified ROM, I noticed it was the wrong ROM only after a fastboot bootloop, so I flashed the correct Redmi 9 Pro EEA ROM and used recovery mode to do a factory reset "Wipe Data", it entered a screen that stated "Your device is locked" followed by two buttons, one for putting my mi account password, the other for connecting to wi-fi, but it was set to airplane mode and I couldn't press anything other that the switch to activate wi-fi that didn't work, I then did a second factory reset and 4G started working, so i could unlock my phone, after booting everything up I see that every time I attempt to do a phonecall my phone immediatly terminates it, and my wi-fi doesn't activate, not recognizing any network and shutting itself off when exiting the Wi-fi setting screen.
I did a third factory reset but not from recovery mode, from the settings menu, it didn't change anything.
My phone is now unlocked but not working properly.
What can I do to fix this issues and possibly root my phone more safely without transforming it into a brick?
Click to expand...
Click to collapse
Better ask here https://forum.xda-developers.com/c/redmi-note-9s-note-9-pro-indian-model.10207/ your model has different specs and processor than Redmi Note 9.
SubwayChamp said:
Better ask here https://forum.xda-developers.com/c/redmi-note-9s-note-9-pro-indian-model.10207/ your model has different specs and processor than Redmi Note 9.
Click to expand...
Click to collapse
thanks will do