Related
Second attempt to fix this nasty bug using Xposed.
Now we have a new fix from Jose Ferreira aka @Bazoocaze, so all fame should go him! I just implemented it as Xposed module.
More details you can find in @Bazoocaze's thread: http://forum.xda-developers.com/xperia-zl/general/cm12-1-cell-standby-mobile-radio-active-t3188147
Source, just in case: https://github.com/pylerSM/MobileRadioActiveFix
Module is not yet in repo, we need more tests.
Download: http://repo.xposed.info/module/com.pyler.mobileradioactivefix
Thank you. Original post is here:
http://forum.xda-developers.com/xperia-zl/general/cm12-1-cell-standby-mobile-radio-active-t3188147
First impression are good, thanks for the good work. Really appreciated
edit: omfgggg battery is killer with the xposed. i think they have done it, that patch works
Works on bacon Oneplus One Exodus Rom 5.1.1
Doesn't seem to work on Oneplus with Sultans stable. Module loads but apps still shows loads of MRA
Skickat från min A0001 via Tapatalk
Nexus 6 CM12.1 nightly
I will try this out an report solutions.
pyler said:
Second attempt to fix this nasty bug using Xposed.
Now we have a new fix from Jose Ferreira aka @Bazoocaze, so all fame should go him! I just implemented it as Xposed module.
More details you can find in @Bazoocaze's thread: http://forum.xda-developers.com/xperia-zl/general/cm12-1-cell-standby-mobile-radio-active-t3188147
Source, just in case: https://github.com/pylerSM/MobileRadioActiveFix
Module is not yet in repo, we need more tests.
Download: http://repo.xposed.info/module/com.pyler.mobileradioactivefix
Click to expand...
Click to collapse
Can't install. Error: invalid apk. Is this an Expedia only mod?
Installed on s6 international. All fine, now test in progress
Inviato dal mio SM-N920C utilizzando Tapatalk
Does this version require an unlocked bootloader? I'm on an att galaxy s5 and can't unlock the BL.
slicetwo said:
Does this version require an unlocked bootloader? I'm on an att galaxy s5 and can't unlock the BL.
Click to expand...
Click to collapse
If you find the other way to root and install exposed framework. But I think bootloader is the key to this.
I already have xposed on a debloated TouchWiz. Didn't need to unlock the bootloader for it.
Soooooooo... Does this module require the BL unlocked, or just xposed?
slicetwo said:
I already have xposed on a debloated TouchWiz. Didn't need to unlock the bootloader for it.
Soooooooo... Does this module require the BL unlocked, or just xposed?
Click to expand...
Click to collapse
Oh didn't know, so then you could just test it(?) I don't see why it would need unlocked bootloader if other modules work. I might be wrong...
Groovy. I just don't wanna get stuck in a bootloop and have to redo my phone.
No bootloop, no need of unlocked bootloader. It is a normal Xposed module.
Pyler do you notice any improvement after using this?
for my yuphoria
plz help me ....................
i have yuphoria phone but in its don't work any xposed modual like Donkey guard
problem occur during runnging time.. so plz help...
and plz give best support or rom for my yuphoria...
and which xposed will work..on my phone.....
and must be work donkey guard.
:crying::crying::crying::crying::crying::crying::crying::crying:
it worksss !!! nexus 6 aicp rom 5.1.1
is this xposed module the same as the zip file on bazoocaze's thread?
Testing on xperia Z2 stock 5.1.1
Enviado desde mi D6503
Testing on Oneplus one 64GB, in Resurrection Remix ROM 5.1.1
Enviado desde mi A0001 mediante Tapatalk
Hi.
This is an Aroma zip that you can use to clean/debloat OxygenOS roms. Simple for use, flash it, check what you want to remove and install it, done.
This zip is tested only on stock OOS rom, but should work on any stock based rom.
Changelog:
v.4.0
Initial release for OxygenOS 4.0.x
Apps that you can remove:
AndroidPay
AntHalService
BTtestmode
BasicDreams
Chrome
DivesIconPack
Drive
Duo
EngSpecialTest
EngineeringMode
Gmail2
Hangouts
LatinImeGoogle
LogKitSdService
Maps
Music2
NFCTestMode
OEMLogKit
OPWallpapers
OemAutoTestServer
OpenWnn
Photos
RifonIconPack
SensorTestTool
Stk
SwiftKey
SwiftKeyFactorySettings
Videos
VrCore
WifiRfTestApk
YouTube
YuloreFramework
OnePlusWizard
SetupWizard
Velvet
Usage:
- Flash in TWRP
Download:
V.4.0 - AFH
Important:
If you still see some of the apps you've removed in your app drawer,please uninstall them manually, these are updates from Google Play.
Credits to @NevaX1, he saved me hour of typing and reading, thank you
And of course @amarullz for the great aroma installer.
First release for 3T, please test and report back, thanks
Thanks!!!!! ?
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
Work like a charme with
OP3T_O2_OPEN_2 (beta 2) 4.0.2
No problems here, running 4.0.1. Thanks!
Works brilliantly. Maybe you can add a few more apps like stock clock and user experience app etc in the future
hassan_1000 said:
Works brilliantly. Maybe you can add a few more apps like stock clock and user experience app etc in the future
Click to expand...
Click to collapse
Make a list and I'll add them on the next release. User experience app in the official oos can be uninstalled manually, did you tried that?
siankatabg said:
First release for 3T, please test and report back, thanks
Click to expand...
Click to collapse
Are all of these apps safe to remove? What do they do?
knpk13 said:
Are all of these apps safe to remove? What do they do?
Click to expand...
Click to collapse
No, at least not for all people. I personally remove all of them, because most of those are already updated and installed in your data partition and the apps in the system are unused.
I can recommend you to remove only those that you know (and you don't need) and those with "test" or "log" in their names.
Is it possible to get a flashable zip for Google phone?
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
inzaghi75 said:
Is it possible to get a flashable zip for Google phone?
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Click to expand...
Click to collapse
+1
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
great! this works on the latest version of oos too.
--Deleted--
I'm on 4.1.6 and when I delete everything I lose the keyboard to decrypt the phone and I have to do a full restore. Anyone else having the same problem?
brhooma said:
I'm on 4.1.6 and when I delete everything I lose the keyboard to decrypt the phone and I have to do a full restore. Anyone else having the same problem?
Click to expand...
Click to collapse
you already answer your question at "delete everything"
brhooma said:
I'm on 4.1.6 and when I delete everything I lose the keyboard to decrypt the phone and I have to do a full restore. Anyone else having the same problem?
Click to expand...
Click to collapse
Yes there is a warning not to delete all keyboards.
This thread is outdated, Oreo port will be uploaded to this other thread from now on.
Download link 7.11.18:
Mega
Baidu
Android One Nougat 7.12.19 is out but not ported. However, you can install it using my modded TWRP
https://forum.xda-developers.com/mi...rp-3-1-1-0-t3715084/post74745680#post74745680
How to install:
- Unlock bootloader
- Flash TWRP
- Wipe data, cache and dalvik
- Flash A1 Firmware
- Flash rom zip file
- Reboot
How to update
- Boot into TWRP
- Wipe cache and dalvik/art
- Flash rom zip file
- Reboot
Known issues:
- If you dont flash A1 firmware your fingerprint will acts as a button while unlocked.
- If you don't have Goodix fingerprint variant, fingerprint may not work.
- You tell me.
FAQ:
Q: Can I flash over August patch without wiping data?
A: Yes, you can. However WiFi may not work. If that's your case try restoring network settings. (Settings -> More -> Restore network settings). If WiFi still doesnt work, you'll need to wipe data.
Q: Can I update via OTA?
A: No, you can't. You'll need to wait until I port the update.
Q: Does this ROM come pre-rooted
A: No, it's the A1 stock rom which doesn't come rooted. If you want root, flash Magisk through TWRP
Q: Can I install Xposed?
A: Yes, you can. Just make sure you download xposed for SDK 25.
Q: Will this rom unlock 4G 800MHz band (B20)?
A: No, it won't unlock it. Mi A1 uses a different modem which supports it. Mi 5X modem doesn't.
Q: Do I need to unlock my bootloader?
A: Yes, you need to unlock the bootloader before you can install any custom ROM.
Q: How can I unlock my bootloader?
A: Apply for permissions on http://en.miui.com/unlock/ then download the tool and follow the steps.
Q: Where can I download TWRP?
A: You can download it from here
Donations:
If you like my work and want to contribute, you can donate via paypal.me/aex12
XDA:DevDB Information
Android One Port Nougat, ROM for the Xiaomi Mi 5X
Contributors
Aex12
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based On: Android One
Version Information
Status: Stable
Current Stable Version: 7.11.18
Stable Release Date: 2017-11-24
Created 2017-10-21
Last Updated 2018-03-07
Reserved
anyone know if it is possible to sideload the ota updates maybe??
---------- Post added at 03:30 PM ---------- Previous post was at 03:15 PM ----------
looks like it would be ok to dirty flash this hmm...
killswitx said:
anyone know if it is possible to sideload the ota updates maybe??
Click to expand...
Click to collapse
As stated on FAQs, you cant update via OTA, as this OTAs are made for an A/B device, and Mi 5X doesnt support A/B.
killswitx said:
looks like it would be ok to dirty flash this hmm...
Click to expand...
Click to collapse
It's OK if you come from another Android One port. Probably you will face some WiFi issues, to solve them read FAQs.
thanks
thanks but Are you sure you will let Android O run in this device??
adeljck said:
thanks but Are you sure you will let Android O run in this device??
Click to expand...
Click to collapse
I cant say it for sure. Will see when it's released for the A1 if it can be ported.
OMG! You're an angel!!
---------- Post added at 04:55 AM ---------- Previous post was at 04:48 AM ----------
@Aex12 is this rom pre-rooted?
I was waiting for this!! THANK YOU SO MUCH!!
Dirty flashed on this rom: http://en.miui.com/forum.php?mod=vi...997&page=15&extra=page=1&mobile=2#pid17831997
Everything working perfectly.
alekos panagulis said:
Dirty flashed on this rom: http://en.miui.com/forum.php?mod=vi...997&page=15&extra=page=1&mobile=2#pid17831997
Everything working perfectly.
Click to expand...
Click to collapse
Didn't you get any WiFi issues?
I got WiFi issues while updating from august to september. But not from september to october. Maybe updating from august to october dont cause any issue.
Aex12 said:
Didn't you get any WiFi issues?
I got WiFi issues while updating from august to september. But not from september to october. Maybe updating from august to october dont cause any issue.
Click to expand...
Click to collapse
No wifi issue.
@Aex12
Thank yoouuu! After waiting so long to unlock my bootloader I finally made it and flashed your rom right away. And it's working as a charm. I'm so happy I got rid of Miui 8 Chinese version and it's many bugs and problems (and occasional Chinese language notification I got no idea what it was saying). MiUi was cute and nice on a few parts, but it just seemed like an unfinished piece of software on many points (super aggressive ram management, brightness slider problem, crazily complex settings menu -especially the applications permissions one divided in three sections-).
This rom works just flawlessly for now, and I had no issue with the fingerprint reader acting as a button on my side. It's really great to see some functions works like fingerprint swipe for notifications or lock-screen notifications. Oh ! And I can finally make the google assistant and feed works out of the box without complex tweaks :laugh:
Camera is still ****ty though (especially coming from a nexus 5x) but, hey, it's a 200€ phone.
Do you have a paypal donate account so I can offer you a beer and encourage you to port the next android updates ?
As we all know all these 3 devices (Note 4x, MIA1 and MI5x) have the se chipsets
Is it possible to port it also on note 4x?
jonjon88 said:
@Aex12
Thank yoouuu! After waiting so long to unlock my bootloader I finally made it and flashed your rom right away. And it's working as a charm. I'm so happy I got rid of Miui 8 Chinese version and it's many bugs and problems (and occasional Chinese language notification I got no idea what it was saying). MiUi was cute and nice on a few parts, but it just seemed like an unfinished piece of software on many points (super aggressive ram management, brightness slider problem, crazily complex settings menu -especially the applications permissions one divided in three sections-).
This rom works just flawlessly for now, and I had no issue with the fingerprint reader acting as a button on my side. It's really great to see some functions works like fingerprint swipe for notifications or lock-screen notifications. Oh ! And I can finally make the google assistant and feed works out of the box without complex tweaks :laugh:
Camera is still ****ty though (especially coming from a nexus 5x) but, hey, it's a 200€ phone.
Do you have a paypal donate account so I can offer you a beer and encourage you to port the next android updates ?
Click to expand...
Click to collapse
You can make camera a little better by downloading the Google Camera modded with HDR+ and adding these two lines to build.prop:
Code:
persist.camera.HAL3.enabled=1
persist.camera.eis.enable=1
However, you will lose HDR support on native camera.
If you want to donate me you can do so on paypal.me/aex12
Thank you, donations are very appreciated!
rEsonancE_0404 said:
As we all know all these 3 devices (Note 4x, MIA1 and MI5x) have the se chipsets
Is it possible to port it also on note 4x?
Click to expand...
Click to collapse
Probably it can be done. Just ask a dev who have Note 4X to port it.
Aex12 said:
You can make camera a little better downloading the Google Camera modded with HDR+ and adding these two lines to the build.prop:
However, you will lose HDR support on native camera.
If you want to donate me you can do so on paypal.me/aex12
Thank you, donations are very appreciated!
Probably it can be done. Just ask a dev who have Note 4X to port it.
Click to expand...
Click to collapse
Edit: Can't PM you
Did you port the MIA1 rom.on 5x or did you build it on source?
I wonder what porting software did you use as android kitchen is not working on newer roms now
Edit2: do you have google+ or anything? To PM you?
After a few hours I noticed that unlocking with fingerprint has become very slow again. Something like 3 seconds.
alekos panagulis said:
After a few hours I noticed that unlocking with fingerprint has become very slow again. Something like 3 seconds.
Click to expand...
Click to collapse
The slow fingerprint sensor is an A1 related issue. Maybe it get improved in the future with updates.
rEsonancE_0404 said:
Edit: Can't PM you
Did you port the MIA1 rom.on 5x or did you build it on source?
I wonder what porting software did you use as android kitchen is not working on newer roms now
Edit2: do you have google+ or anything? To PM you?
Click to expand...
Click to collapse
I dont use any kind of AIO software. I use a bunch of linux tools and use them through CLI.
I use simg2img and make_ext4fs for the system.img and mkbootimg and unpackbootimg for the boot.img
Hello Aex12, I have no coding skills, so maybe my question is silly: it is possible to introduce in this rom the possibility to set different ringtone for each sim? Thank you.
Inviato dal mio Mi A1 utilizzando Tapatalk
alekos panagulis said:
Hello Aex12, I have no coding skills, so maybe my question is silly: it is possible to introduce in this rom the possibility to set different ringtone for each sim? Thank you.
Inviato dal mio Mi A1 utilizzando Tapatalk
Click to expand...
Click to collapse
Yes, it would be possible. However this rom is intended to be an exact same copy of the Mi A1.
Aex12 said:
Yes, it would be possible. However this rom is intended to be an exact same copy of the Mi A1.
Click to expand...
Click to collapse
Oh wow! Please consider to introduce this feature, please!! You could make a copy of Mi A1 and one more rom with experimental features. You would be my hero.
Inviato dal mio Mi A1 utilizzando Tapatalk
After the emui 9 updates to honor 8x china version, google play services stop working.GMS installer also didn't work anymore. Is there anyone here to help me? I need a fix ASAP.Thank you.
meme probleme
I have also the same problem,
Yes its availble use frimware finder app to see new rollable 8.2 version
rakib1129 said:
After the emui 9 updates to honor 8x china version, google play services stop working.GMS installer also didn't work anymore. Is there anyone here to help me? I need a fix ASAP.Thank you.
Click to expand...
Click to collapse
Goto device settings->Apps & Notification->Apps->Google Play Services->Storage->Clear cache & clear data.
Santhosh362 said:
Goto device settings->Apps & Notification->Apps->Google Play Services->Storage->Clear cache & clear data.
Click to expand...
Click to collapse
Didn't work. We can't even access the play service storage cache. It's stuck with white screen.
rakib1129 said:
After the emui 9 updates to honor 8x china version, google play services stop working.GMS installer also didn't work anymore. Is there anyone here to help me? I need a fix ASAP.Thank you.
Click to expand...
Click to collapse
Are you using adb to install google services?
The last time i updated OTA my google services were gone and half the apps didnt open...
And the apk refused to install from the phone!
After reinstalling using ADB everything worked again.
Enviado desde mi ARE-AL00 mediante Tapatalk
Off-topic
Those who updated to latest EMUI9, please check Dev Options bluetooth codec and describe what you see?
You may need to turn ON bluetooth to get the full list.
Is HWA or LDAC present?
Is it greyed out?
Does HWA or LDAC stick after selection? Select HWA/LDAC, exit Dev options and check again
Much thanks
alrynec said:
Are you using adb to install google services?
The last time i updated OTA my google services were gone and half the apps didnt open...
And the apk refused to install from the phone!
After reinstalling using ADB everything worked again.
Enviado desde mi ARE-AL00 mediante Tapatalk
Click to expand...
Click to collapse
No.Is there any tutorial or guide for that?
alrynec said:
Are you using adb to install google services?
The last time i updated OTA my google services were gone and half the apps didnt open...
And the apk refused to install from the phone!
After reinstalling using ADB everything worked again.
Enviado desde mi ARE-AL00 mediante Tapatalk
Click to expand...
Click to collapse
After installing using adb Google services are working on your 8x??
rakib1129 said:
After the emui 9 updates to honor 8x china version, google play services stop working.GMS installer also didn't work anymore. Is there anyone here to help me? I need a fix ASAP.Thank you.
Click to expand...
Click to collapse
Bought a mate 20x china version. The seller had installed Google playstore but it cannot either download or update any app. It shows download pending,,,,,,
I have already cleared cache and data of playstore, play services and framework cache as well. Didn't work.
I did a factory reset. No good.
Then I tried reinstalling google apps via google installer v2 and v3. Both fail to install google as I already have a never update of google play services.
What should I do know? Please help!
GMS on EMUI9
Instructions for installing google framework on emui 9 cn.ui.vmall.com/thread-20304446-1-1.html. An unlocked bootloader is required!
Problem open bootloader
fakimosha said:
Instructions for installing google framework on emui 9 cn.ui.vmall.com/thread-20304446-1-1.html. An unlocked bootloader is required!
Click to expand...
Click to collapse
How open bootloader? This is problem.
me too. howto fix?
Hi there,
i have a ZTE Blade A5 2019 as a replacement for some weeks for my Galaxy S7. It seems like it runs Android Go instead of standard Android. Unfortunately some apps arent supported, like Wear OS App, which i need.
Is there any way to upgrade to a standard Android? Like flashing another android or installing some google apps (like google services, google launcher) to make it compatible with that app?
Thanks!
Did you try to manually install Wear APK?
https://www.apkmirror.com/apk/google-inc/android-wear-smartwatch-android-wear/
Otherwise on a Reddit thread someone claimed he was able to install form play store after changing build.prop file. But no change details and you would need root, of course
About your main question: it would be possible as long as someone provided a custom ROM for the device
Inviato dal mio Mi MIX 2 utilizzando Tapatalk
brainvision said:
Did you try to manually install Wear APK?
https://www.apkmirror.com/apk/google-inc/android-wear-smartwatch-android-wear/
Otherwise on a Reddit thread someone claimed he was able to install form play store after changing build.prop file. But no change details and you would need root, of course
About your main question: it would be possible as long as someone provided a custom ROM for the device
Inviato dal mio Mi MIX 2 utilizzando Tapatalk
Click to expand...
Click to collapse
i tried it and the app freezes on the start screen (wear os logo) and nothing happens.
I also tried to update google play services to a newer version, because maybe there are some framework functions missing for the app to work. But first the service crashed every 5-10 sec, then the play store showed me an update for the services, after that the app actually started but couldnt connect to the watch, i restarted the device and now the app freezes again. I dont know whats wrong at all, the app itself faulty or still some android dependencies missing. Does anybody has a clue?
would you share that reddit link with me?
Edit:
Current Versions:
Google Play Services: 20.12.16 (110306-306753009)
Google Services Framework: 9-5272573 (updated: 31. December 2008)
maybe the services are too old?
AI don't know, I think it would be hard..
Anyway the link: https://www.reddit.com/r/WearOS/comments/a32abv/wearos_android_go_compatibility/
EDIT I read it again the guy said to turn off the lowmem option, but you still need root..
Inviato dal mio Mi MIX 2 utilizzando Tapatalk
brainvision said:
AI don't know, I think it would be hard..
Anyway the link: https://www.reddit.com/r/WearOS/comments/a32abv/wearos_android_go_compatibility/
EDIT I read it again the guy said to turn off the lowmem option, but you still need root..
Inviato dal mio Mi MIX 2 utilizzando Tapatalk
Click to expand...
Click to collapse
Ok, thx. I will try to root it somehow (didnt find any instructions) and try to set this lowmem option
k1x1987 said:
Ok, thx. I will try to root it somehow (didnt find any instructions) and try to set this lowmem option
Click to expand...
Click to collapse
Yea don't use some random APK or pc file to root, there are fake sites claiming to root your device based on what you search on Google. Ask on XDA about the device and CPU, if it's not here it's hard that someone ever rooted it.
Or if you want to experiment consider you can brick the device
Good luck [emoji123]
Inviato dal mio Mi MIX 2 utilizzando Tapatalk
k1x1987 said:
Hi there,
i have a ZTE Blade A5 2019 as a replacement for some weeks for my Galaxy S7. It seems like it runs Android Go instead of standard Android. Unfortunately some apps arent supported, like Wear OS App, which i need.
Is there any way to upgrade to a standard Android? Like flashing another android or installing some google apps (like google services, google launcher) to make it compatible with that app?
Thanks!
Click to expand...
Click to collapse
I think you can flash any stock Android of your choice as long as its minimum system requirements are met: stock Android generally requires a faster CPU, more RAM, etc.pp than Android GO.
Check out your respective devices' Android Development section on XDA, you might be able to find a non-android go ROM there. Goodluck!
jwoegerbauer said:
I think you can flash any stock Android of your choice as long as its minimum system requirements are met: stock Android generally requires a faster CPU, more RAM, etc.pp than Android GO.
Click to expand...
Click to collapse
What? How come? You can't flash a rom built for a specific device with a certain CPU on other device. It would 100% brick your device!
He could root more easily if the CPU is a common one (mediatek or Snapdragon) however
brainvision said:
What? How come? You can't flash a rom built for a specific device with a certain CPU on other device. It would 100% brick your device!
He could root more easily if the CPU is a common one (mediatek or Snapdragon) however
Click to expand...
Click to collapse
Garbage ...
I spoke of stock Android - or pure Android as I like to call it - what - I'm pretty sure - in no case depends on what manufacturer produced the CPU: it depends on CPU-architecture only, IMHO.
For example Lineage OS offers you a pure, stock Android experience for your device. Others also exist.
AFAIK you at any time also can replace on a mobile its Android ( downgrade/upgrade ) , as long as it's suitable.
jwoegerbauer said:
Garbage ...
I spoke of stock Android - or pure Android as I like to call it - what - I'm pretty sure - in no case depends on what manufacturer produced the CPU: it depends on CPU-architecture only, IMHO.
For example Lineage OS offers you a pure, stock Android experience for your device. Others also exist.
AFAIK you at any time also can replace on a mobile its Android ( downgrade/upgrade ) , as long as it's suitable.
Click to expand...
Click to collapse
maybe I didn't understand your words, but just to be clear: you can't flash any random ROM on your device.
CPU is only a factor. Another one are partitions. Also before anything you need to root and you need a custom recovery. And each device needs it's own.
So, yes, depends on cpu, not cpu manufactures. They could make the job easy by releasing drivers, but they still often don't do.
Don't believe me? Flash some random lineage os that is not for your device and then tell us what happens..
Inviato dal mio Mi MIX 2 utilizzando Tapatalk
EDIT double
k1x1987 said:
Ok, thx. I will try to root it somehow (didnt find any instructions) and try to set this lowmem option
Click to expand...
Click to collapse
The Build prop method really worked for me like a charm. I was unable to use notification, third party access in my Samsung J2core(j260g). But i rooted my phone using magisk and odin by creating a boot.tar file. it took hardly 5 minutes to follow all process. After rooting, just download the build.prop editor from play store and search for lowram config. edit the entry to true . reboot and you will see a full fledged android instead of go.