HELLO , first SORRY FOR MY BAD ENGLISH...
my friend have gaves to me one samsung s6 edge sm-g925f from his cousin.
my friend have only changed the screen (broken) ...
now the phone when i try to switch on show to me this words:
"Recovery is not seamdroid enforcing"
and:
" your device will be in recovery mode all throught the recovery process
tip: if the data recovery is complete but your device keep in frozen state, please restart our product and coonnect your device the program will prompt you to exit recovery mode"
after many times that i have try to go in recovery mode, i have see that for me is impossible.
so i'd like to recover picture, photo video and so on...
is possible?
on my netbook win win 7 i have install both kies and smart switch.
but they do not recognize the phone.
i have also installed the correct driver.
now i'd like to recover data, picture and so on.
and i want to restart the phone...how may i do it?
please help me ...
thank you in advance....
hello..fail to install rom
this is the response:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXS3DPDC_G925FITV3DPB2_G925FXXS3DPB3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and this is teh rom:
G925FXXS3DPDC_G925FITV3DPB2_G925FXXS3DPB3_HOME.tar
please help me....
Related
Hi,
Recently i had an Samsung Galaxy Ace GT-S5839i, and when im trying to change for a custom rom (Razord Droid v2.5 on this forum) the phone bricks on the screen "Samsung Galaxy Ace GT-S5839i" when i try to turn him on, so i cant go to recovery mode to install another one, the only thing i can do with the phone is to put him on download mode, so i used de odin to flash de stock rom (Vodafone PT on sammobile), but always happends this error when i'm trying.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBULI1_S5839iTCLLE1_S5839iBULI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> BcmCP.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I already try to use another USB port, another cable, another PC, another ROM and the result is the same.
Anyone can help me with that ?
Reply
gadelhasss said:
Hi,
Recently i had an Samsung Galaxy Ace GT-S5839i, and when im trying to change for a custom rom (Razord Droid v2.5 on this forum) the phone bricks on the screen "Samsung Galaxy Ace GT-S5839i" when i try to turn him on, so i cant go to recovery mode to install another one, the only thing i can do with the phone is to put him on download mode, so i used de odin to flash de stock rom (Vodafone PT on sammobile), but always happends this error when i'm trying.
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBULI1_S5839iTCLLE1_S5839iBULI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> BcmCP.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I already try to use another USB port, another cable, another PC, another ROM and the result is the same.
Anyone can help me with that ?
Click to expand...
Click to collapse
Hello there!
I am knew to the android stuff, but I have flashed a new rom to my Galaxy Ace S5839i and now in the log screen appears S5830i. But it works so it's good for now.
Answering to your question I got that error too, I've downloaded a new Odin and a new rom to flash (like I said, know Appears S5830i on log screen) and it worked.
I know it's not much of an answer but I'm just trying to help, I wish you can sort it out.
All the best to you.
Hi to all! First of all, I am sorry if I put my problem in wrong forum. I'm new here...
I was trying to install Android Jelly Bean 4.2.2 firmware (I9105PXXUBMI3_I9105POXXBMJ1_I9105PXXUBMI1_HOME.tar.md5) on my Galaxy SII Plus via Odin_v3.09. Unfortunately, I put firmware file in field BL (in previous versions of Odin it was Bootloader) instead of AP. Odin finishes with status FAIL. Complete log is below:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9105PXXUBMI3_I9105POXXBMJ1_I9105PXXUBMI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> vc-firmware.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After that, phone is stuck in Download mode. I can't restart it, turn it off or boot it in recovery mode. All I can do is to boot it in download mode again or I get message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" (which, by the way, doesn't work because it Kies cannot see the phone in this state).
Any help would be much appreciated! Thanks guys!
Hello!
Last night I attempted to flash my Note II SCH-I605 that was running 4.4.2.
This is what it came loaded with.
I used this custom load to flash it: root66_VZW_stock_system.tar.md5
Now it will only boot to the Samsung Galaxy Note II splash Screen.
After this it only goes to a black screen and will not boot any further.
I did not know that this version of Android has a locked boot loader.
I have tried to clear Cache and Erase Data/Factory reset.
It ALWAYS says "Error" right before rebooting.
Now, when I attempt to flash it back this is what I get:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please walk me through the steps on how to get this resolved?
Fixed it!!!
I followed jadon0827's advice in this posting:
http://forum.xda-developers.com/showthread.php?t=2788925
And my Phone booted back up!
Now I just have to pour through everything on here to see if I can root my phone from a 4.4.2 stock image.
Unless someone would like to save me some time and tell me if it can be done for sure...
Hello, so recently I bought my first samsung device and tried to root my Samsung Galaxy S6 Edge and I was a complete newbie in doing this so then my device keeps saying Recovery Is not Sendroid Enforcing on the start up screen. I Live in Australia and am currently with the carrier Vodafone.
Help PLease
So I tried doing a stock firmware update with a .tar I found somewhere that said it was for the SM-G925I Vodafone Australia so I downloaded I go on Odin Tick Auto Reboot and F. Reset time i then tick AP and select the .tar file it takes a while to check the file then it says leave cs I connect my phone to my pc I then press start and get fail. It says then on my phone SW REV. CHECK FAIL. DEVICE: 3, BINARY: 1
ODIN Script:
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925IDVU1AOC4_G925IVAU1AOC4_G925IDVU1AOC5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Loquar said:
So I tried doing a stock firmware update with a .tar I found somewhere that said it was for the SM-G925I Vodafone Australia so I downloaded I go on Odin Tick Auto Reboot and F. Reset time i then tick AP and select the .tar file it takes a while to check the file then it says leave cs I connect my phone to my pc I then press start and get fail. It says then on my phone SW REV. CHECK FAIL. DEVICE: 3, BINARY: 1
ODIN Script:
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925IDVU1AOC4_G925IVAU1AOC4_G925IDVU1AOC5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
i am having same issues just trying to get my phone back to stock, have tried various different firmwares but just cant get odin to flash...
never had this issue on any previous fones and have been flashing many samsung devices for many years...
but the phone came to me in a bricked state so not sure as have read here that something to do with bootloader, not sure if phone was rooted or what firmware it was on before...
all i would like to do is get it back to stock firmware and running up an normal....
is there a simple way or simple files that i need?
HELLO , first SORRY FOR MY BAD ENGLISH...
my friend have gaves to me one samsung s6 edge sm-g925f from his cousin.
my friend have only changed the screen (broken) ...
now the phone when i try to switch on show to me this words:
"Recovery is not seamdroid enforcing"
and:
" your device will be in recovery mode all throught the recovery process
tip: if the data recovery is complete but your device keep in frozen state, please restart our product and coonnect your device the program will prompt you to exit recovery mode"
after many times that i have try to go in recovery mode, i have see that for me is impossible.
so i'd like to recover picture, photo video and so on...
is possible?
on my netbook win win 7 i have install both kies and smart switch.
but they do not recognize the phone.
i have also installed the correct driver.
now i'd like to recover data, picture and so on.
and i want to restart the phone...how may i do it?
please help me ...
thank you in advance....
news:
hello..fail to install rom
this is the response:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXS3DPDC_G925FITV3DPB2_G925FXXS3DPB3_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and this is teh rom:
G925FXXS3DPDC_G925FITV3DPB2_G925FXXS3DPB3_HOME.tar
please help me....
buzz71 said:
HELLO , first SORRY FOR MY BAD ENGLISH...
my friend have gaves to me one samsung s6 edge sm-g925f from his cousin.
my friend have only changed the screen (broken) ...
now the phone when i try to switch on show to me this words:
"Recovery is not seamdroid enforcing"
and:
" your device will be in recovery mode all throught the recovery process
tip: if the data recovery is complete but your device keep in frozen state, please restart our product and coonnect your device the program will prompt you to exit recovery mode"
after many times that i have try to go in recovery mode, i have see that for me is impossible.
so i'd like to recover picture, photo video and so on...
is possible?
on my netbook win win 7 i have install both kies and smart switch.
but they do not recognize the phone.
i have also installed the correct driver.
now i'd like to recover data, picture and so on.
and i want to restart the phone...how may i do it?
please help me ...
thank you in advance....
news:
hello..fail to install rom
this is the response:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXS3DPDC_G925FITV3DPB2_G925FXXS3DPB3_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and this is teh rom:
G925FXXS3DPDC_G925FITV3DPB2_G925FXXS3DPB3_HOME.tar
please help me....
Click to expand...
Click to collapse
Have you fixed this? You do know by flashing a firmware all your data will be deleted. So do you want the data or the phone to flash and work?
i'have upgraded the firmware...now work's fine...i have tried many firmwares. now the 6.01 working fine!