Hi everyone,
Maybe it's a dumb question but I would like to buy a car's magnet support from Spigen, this one to be specific:
https://www.amazon.fr/dp/B0109JIQ0W/_encoding=UTF8?coliid=I3MFOYES92280T&colid=6Q7SUXA95ZM4
And I would like to put the magnet of the phone in my case on the back of the phone, but I would like to know if there will not be a conflict with QI charging or even explode I don't know ^^
Thank you.
If you put the metal disc just below the camera, your wireless charging will NOT be affected.
Related
Hello everyone I wanted to share my experience with a wireless charging pad and a lifeproof case. I purchased the Nuud lifeproof case a while back and ended up having to replace it due to the charging door that snaps closed started breaking. I figured a way to prevent me from opening that little snap door is to go with wireless charging.
I purchased the wireless charging reciever card and the oem charging pad off amazon. Much to my disappoint me the case was too thick for the wireless charge to continually work. It recognizes that its on the pad but would act as if I were plugging and unplugging a power cord every 2 seconds. So I tried to come up with ways to reduce the surface area between my card and the charger pad. I removed the stickers which ended up not being enough but then came up with the idea to remove the top cover of the oem charging pad. Removing this plastic seems like it was just enough to get it to work correctly. The only problem I see now is the phone is actually sitting on top of the coil which brings up some heat issues.
I'm thinking of sewing together some fabric to act as a cover. What do you guys think about this?
BUMP - I have a very thick ballistics case. I am wondering if a solution like this would work for me as well.
stein5830 said:
BUMP - I have a very thick ballistics case. I am wondering if a solution like this would work for me as well.
Click to expand...
Click to collapse
I doubt my case is as thick as yours stein but it is working correctly once I removed the plastic cover on the charger pad. Not sure if you have all the items yet but you can find them on amazon for probably around 60 bucks.
Wireless Charging is working fine for me with my Otterbox Defender case and an Incipio Ghost 100 Wireless Charging Base. I'm using a cheap China QI antenna receiver that I got on eBay.
Currupt247 said:
Hello everyone I wanted to share my experience with a wireless charging pad and a lifeproof case. I purchased the Nuud lifeproof case a while back and ended up having to replace it due to the charging door that snaps closed started breaking. I figured a way to prevent me from opening that little snap door is to go with wireless charging.
I purchased the wireless charging reciever card and the oem charging pad off amazon. Much to my disappoint me the case was too thick for the wireless charge to continually work. It recognizes that its on the pad but would act as if I were plugging and unplugging a power cord every 2 seconds. So I tried to come up with ways to reduce the surface area between my card and the charger pad. I removed the stickers which ended up not being enough but then came up with the idea to remove the top cover of the oem charging pad. Removing this plastic seems like it was just enough to get it to work correctly. The only problem I see now is the phone is actually sitting on top of the coil which brings up some heat issues.
I'm thinking of sewing together some fabric to act as a cover. What do you guys think about this?
Click to expand...
Click to collapse
Try moving the phone slightly on the charging pad.
I don't have the factory pad but on both of my qui charging pads the phone needs to be placed slightly above center. If I put it directly on the center I experienced the same symptoms you are describing.
Sent from a Galaxy S4... Far far away
gadget! said:
Try moving the phone slightly on the charging pad.
I don't have the factory pad but on both of my qui charging pads the phone needs to be placed slightly above center. If I put it directly on the center I experienced the same symptoms you are describing.
Sent from a Galaxy S4... Far far away
Click to expand...
Click to collapse
im thinking this oem charging pad is the prob I'm going to order the ghost and see if I get better results.
The magnetic charging docks are not bad. Also, the qi charging case from Sony is pretty nice. However, the best case would be a plastic case with a Qi wireless coil inside with a lead that wraps around and fits over the magnetic contact. Qi chargers like the Tylt work really well and they are so handy at home and in the car. I wear a holster so the flip cover is not necessary.
Sent from my D6503 using XDA Free mobile app
rambo6 said:
The magnetic charging docks are not bad. Also, the qi charging case from Sony is pretty nice. However, the best case would be a plastic case with a Qi wireless coil inside with a lead that wraps around and fits over the magnetic contact. Qi chargers like the Tylt work really well and they are so handy at home and in the car. I wear a holster so the flip cover is not necessary.
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
Can you please tell me where you managed to get the Qi charging case? I cannot find it anywhere...
matthieup said:
Can you please tell me where you managed to get the Qi charging case? I cannot find it anywhere...
Click to expand...
Click to collapse
Sony Cancelled the accessory.
They also removed any trace of it on their official websites.
HussainQ said:
Sony Cancelled the accessory.
They also removed any trace of it on their official websites.
Click to expand...
Click to collapse
I know, that's why I asked if maybe there are some prototype floating around
I did not mean to infer that I had one of the Sony Qi charging cases. I may have purchased one had they been available. I prefer the a slim fitting tpu or hybrid case. However, none that I have found fit correctly. Sony's magnetic charging docks are great and work fast, but one has to remove his case to use them. Yet no one makes a good case that covers up the SIM/Micro USB cover and exposes the magnetic charging area. This is totally stupid. One only seldomly changes his SIM and needs access to the micro usb port, but one always needs to charge.
If Sony is not going to add a Qi charger in the phone, they should at least make some good folio and slim fit cases at a sub $50 price that can be left on while charging using the magnetic dock.
Also, charging with a car dock is a pain without Qi charging using the Z2. The buttons are all in the wrong place also and interfere with the sides of both my car docks.
It's a real shame that Sony has not made a better attempt at charging options combined with cases. The Sony Z2 is a great phone. Even better yet woukd be a removeable battery. This is the only feature that keeps me going back to Samsung.
Sent from my D6503 using XDA Free mobile app
I have been thinking about trying this. I have dismantled a magnetic charger and there are only 2 wires in there. Positive and negative. Is there anything stopping me buying a universal micro usb qi adapter and soldering the positive and negative from that onto the positive and negative of the magnetic charger and hiding it all inside a case?
That's an interesting Idea. I've thought of the same thing, though I wanted to connect to the magnetic charger contact rather than the micro USB port. I'd like to make a case with a Qi charger and FM radio antenna built in. It wouldn't take up that much space.
I hope someone at Sony is watching this thread.
Sent from my D6503 using XDA Free mobile app
I for one actually feel a bit cheated.
The did announce Qi charging capability through a case and plate and while I had to choose between the S5/M8/Z2, this was one of the element that I considered...
Now all of a sudden they decide to cancel...
Though I would much prefer a Qi charger, the magnetic chargers can be useful. I bought some cheap magnetic charging cables and cut some of the plastic off them so they would work with my phone's case on. The magnets are weak and it s a pain to get them attached but of charges quite fast.
I was hoping that the Z3 would come out of the gate with wireless charging. In a statement made a few months back, they stated they would have Qi charging by the end of this year.
Hopefully the Z4 will have it. They also need to put 32 GB of internal storage in their phones.
Sent from my D6503 using XDA Free mobile app
If someone made a QI charging case, I'd be willing to pay for it, as long as it looked good enough!
might be worth testing out to see if the WCR14 connector and charging type works on a Z2. i can see the connector alone makes the phone look much bigger.
Why sony decided to put a magnetic charge on the side is beyond me.
Did anybody get any where with this? I am thinking about getting one of the coils on ebay for the samsungs and modifying it, they look very slimline as I suppose they are design to fit behind the battery cover?
I am planning to have it sit inside a TPU case I have. The difficult part will be the magnetic part / Soldering....etc
Preordered my phone yesterday and now i'm looking for some case. I think that I will go with some "wallet" case. Does somebody now good case in this gategory which support wireless charging ? This type of cases look's so thick, that does wireless work with these ?
Wireless Charging should not be a big issue in a case, it mostly just depends on the quality of the Charger.
There are several posts here about the Case Mate folio stand case, with good reviews. It is reported that the case works with wireless qi chargers, and, for the most part, it is favorably reviewed. It is also fairly slim, if a low profile is important to you.
I recommend you not to buy a flip case if you frequently use wireless charger!
Hi,
I recommend not to use any flip case. Yes, wireless charging may interrupt sometime if you use flip case. It also reduces the charging efficiency of device. So better not to buy a flip case if you frequently use wireless charger to charge your device.
sigma24 said:
Hi,
I recommend not to use any flip case. Yes, wireless charging may interrupt sometime if you use flip case. It also reduces the charging efficiency of device. So better not to buy a flip case if you frequently use wireless charger to charge your device.
Click to expand...
Click to collapse
I have used only wireless charger with my nexus 5, and will do same with N6. Well, maybe I have to forget wallet cases. Thanks anyway !
Hey guys!
Thought I would post a review for this Qi wireless car charger since I didn't see much info about it and help those in deciding one for their car.
I have been using this Qi wireless car charger for about 4 months. The weather here is summer now so the car interior does get super hot, and so far this charger has been working like a champ in the heat.
The charger comes with a bunch of accessories which include:
-Vent adapter holder
-Traditional suction cup stand holder for dashboards
-Micro Usb cable
-Usb car chager (1 input)
-Sticky pads for wire management
I used the suction cup on my dash since my vents in my car are not ideal for my setup. The Qi charger is made hard sturdy black plastic and the section where you place your phone is made of a softer grippy rubber that holds the Nexus 6 very well. There is button on the back that release the two arm clamps. The Nexus 6 being a big of a device I thought it would be a tight fit, but I am happy to report that there is plenty of space. I have a Caseology Case and still a bit of extra room on the dock. So for those with thicker cases than mine can still fit, but in terms of it charging through a thicker case is something I do not have to test, but for those familiar with my case which I will put a link on the bottom of this post, my phone charges perfectly fine with it. Also the Qi charging unit in this has a 3 coil system so placement is not an issue and wireless charging is maximized and efficient as possible. There is a LED light on the bottom that indicates if it idle or charging, Green means idle and Blue means charging. The cradle of the charger is very sturdy and holds the Nexus with ease, have not had it drop my phone (yet) and hopefully stays that way. I use the charger everyday for the past 4 months and yet to encounter an issue, remember I am using it 95 degree weather for the past 4 months and it has not died on me yet. Once winter comes I will update on how it handles the cold, hopefully like a champ as it does in the summer! I attached some pictures for everyone to have a better look at it. Overall I am very happy with this charger and highly recommended!
Any questions about this product let me know and I will try my best to answer and help!
Amazon Links:
Qi wireless charger:
http://www.amazon.com/RAVPower-Wire...id=1440909770&sr=8-1&keywords=ravpower+qi+car
Case:
http://www.amazon.com/Caseology®-Me...=1440911291&sr=8-1&keywords=nexus+6+caseology
Thanks!
Look.like so good.
Can you try in front window and let us know how it works? When I get my phone it's going to be a window mount and since I'll have to use an OTG adapter for long distance that means I'll have to use wireless charging.
thunderstruck! said:
Can you try in front window and let us know how it works? When I get my phone it's going to be a window mount and since I'll have to use an OTG adapter for long distance that means I'll have to use wireless charging.
Click to expand...
Click to collapse
If you mean having the suction cup on the windows then yes it works even better cause the surface on the glass gives it an even better grip.
Hello,
Im lokking for the case that does it all. That you can use on a magnetic car mount and also on a wireless charger stand.
I bought these one, https://store.exelium.net/en/galaxy-s8/189-galaxy-s8-wireless-charging-case.html
And it does all of that perfectly, but the case it self i dont like it because it feels and is slippery on the hands.
Do you know of something similar? or have any recomendation?
Thanks.
I just bought this:
https://www.ipitaka.com/collections/aramid-case-for-samsung-galaxy-s8
I can confirm that wireless charging works with the case on. I also just ordered the magnetic mount, just waiting on it to arrive.
edit:
Here's a post with pics:
https://forum.xda-developers.com/showpost.php?p=72532053&postcount=4
I don't think any wireless charger will work through the little piece of metal needed for the magnetic stand/holder. If you find a way, please let me know.
AJ4VS said:
I don't think any wireless charger will work through the little piece of metal needed for the magnetic stand/holder. If you find a way, please let me know.
Click to expand...
Click to collapse
The Pitaka case works with wireless charging and magnetic mount. I think the metal in the case is shaped like a ring which allows wireless charge to pass through.
Slightly off topic. Has anyone been able to find a good wireless charger for the car? Air vent chargers have unsightly cables in the car which I really tend to avoid. What I would ideally like is a wireless charger that is like a cup holder style, has a sticky pad on and is quick charge compatible.
I just dont get why there is a gap in the market for something like that.
Once again, wishlist:
1. Cup holder style wireless charger
2. Sticky pad so that the phone stays in place (Can consider magnetic as well, but will need a case with that)
3. Quick charge
4. Hide wires somewhere