Related
I tried to flash the team spain 5.8 recovery but it does not work , flash seem to go well but still only boots into stock recovery.
Rom is 15s
zsajak said:
I tried to flash the team spain 5.8 recovery but it does not work , flash seem to go well but still only boots into stock recovery.
Rom is 15s
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=68462069&postcount=2
sanke1 said:
http://forum.xda-developers.com/showpost.php?p=68462069&postcount=2
Click to expand...
Click to collapse
How can I follow your guide If I cannot flash the recovery?
zsajak said:
How can I follow your guide If I cannot flash the recovery?
Click to expand...
Click to collapse
Are you having correct adb drivers installed? On my PC Windows 10 X64, they get installed from Windows Update and show up as "London Marshal adb interface."
It wouldn't hurt to try a different USB port.
Also try fully resetting your phone to factory default from the settings.
I am using X821 and only the TWRP recovery posted in my guide works. Other recoveries do not work for our device.
BTW I have updated my guide. Check it out again.
sanke1 said:
Are you having correct adb drivers installed? On my PC Windows 10 X64, they get installed from Windows Update and show up as "London Marshal adb interface."
It wouldn't hurt to try a different USB port.
Also try fully resetting your phone to factory default from the settings.
I am using X821 and only the TWRP recovery posted in my guide works. Other recoveries do not work for our device.
BTW I have updated my guide. Check it out again.
Click to expand...
Click to collapse
For some reason it was not working, it is now.
I still get a bootloop when I try to flash the resurrection remix rom.
cm13 by teamspain worked fine though
sanke1 said:
Are you having correct adb drivers installed? On my PC Windows 10 X64, they get installed from Windows Update and show up as "London Marshal adb interface."
It wouldn't hurt to try a different USB port.
Also try fully resetting your phone to factory default from the settings.
I am using X821 and only the TWRP recovery posted in my guide works. Other recoveries do not work for our device.
BTW I have updated my guide. Check it out again.
Click to expand...
Click to collapse
I followed your guide and installed twrp correctly and it worked.
I cannot install any rom besides cm13 unofficial though, i always get a bootloop if I install resurrection remix for example.
Its really very annoying, I wiped everything including data and system, only the official 16s roms works and cm13 unofficial, all other roms result in a bootloop.
something is not right here.
twrp not mounting storage data
sanke1 said:
Are you having correct adb drivers installed? On my PC Windows 10 X64, they get installed from Windows Update and show up as "London Marshal adb interface."
It wouldn't hurt to try a different USB port.
Also try fully resetting your phone to factory default from the settings.
I am using X821 and only the TWRP recovery posted in my guide works. Other recoveries do not work for our device.
BTW I have updated my guide. Check it out again.
Click to expand...
Click to collapse
twrp flased but its not mounting storage data, also sideload command to install supersu.zip didnt worked tried several times
its just stopping exactly at 73% everytime
hi
i have an honor 7 from switzerland and i tried to install on him the PLK-AL10 6.6.1 - B651 full, ofcurse the instalation was stuck on 19% and i can't go to recovery,
what i can do to fix these?
thanks
update, i can't get the product ID (to find this, open the dialler and enter *#*#1357946#*#*) - cause i don't have dialer..and system....
what you advice me to do next?
First of all, I would guess you have a model PLK-L01, not AL10. Anyway, we need more information if we should help you. What does "can't go to recovery" mean exactly? What have you tried? What happens and what does not happen when you try? What happens when you connect the phone to a PC ?
Not sure if of any use, but try to connect the phone to a PC via USB Cable, then press volume UP and Power to boot into eRecovery, a second (and I think identical) recovery. Maybe that works? If you make any progress, try the Honor 7 MultiTool.
Let us know if you can make any progress.
yes its PLK-L01
i worked on the day with these and finally what i did is that i put the update.app into the micro sd card and than start the device + vol up+vol down and than the device probebly tooks the update.app that i add to the sd card and installed him correctly.
the case was that i probebly install at the first time locally version for AL10 and than i start MultiTool but the multitool request to open the bootloader in order to install the bootloader something that needs the productID that i can get if i have a dialer and enter *#*#1357946#*#* but i don't have any dialer since i don't have any system so...i don't know how, but it's worked as i wrote from the sd card
So you managed to install the UPDATE.APP package??
yes
Sent from my Nexus 6P using Tapatalk
I7210I said:
yes
Click to expand...
Click to collapse
Good.
Sent from my Huawei PLK-L01 using XDA Labs
I7210I said:
yes
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Just don´t forget, if you root the device, you must first unroot, flash stock recovery.img and boot.img and THEN update to whatever stock ROM version available.
no i won't be root the device,
i just want to know that now he is ok with stock rom(these i know) stock recovery and stock recovery, how can i know that for sure?
Sent from my Nexus 6P using Tapatalk
SOLVED!!!!
THANKS : http://forum.xda-developers.com/le-max-2/development/twrp-recovery-3-0-2-f2fs-letv-max2le-t3486134
AND THANKS : https://www.skyneel.com/install-twrp-recovery-and-root-letv-leeco-le-max-2
if someone have the same problem just do what i did ! XXDDDDDD
georgesalo said:
hello guys as i said i installed 3 TWRP but all of them when i hit vol + and power it going on stock recovery...any solution?
Click to expand...
Click to collapse
Hello. Where in fastboot mode and you flash recovery it should automatically boot after flashing. You may also try "fastboot boot" command to run recovery without flashing.
Regards Filozof71
Sent from my Le X820 using Tapatalk
Filozof71 said:
Hello. Where in fastboot mode and you flash recovery it should automatically boot after flashing. You may also try "fastboot boot" command to run recovery without flashing.
Regards Filozof71
Sent from my Le X820 using Tapatalk
Click to expand...
Click to collapse
thanks for reply but i did it can you tell me the best of the best rom to flash i want a high score for antutu DD
georgesalo said:
thanks for reply but i did it can you tell me the best of the best rom to flash i want a high score for antutu DD
Click to expand...
Click to collapse
Hello, To get best Antutu get the phone cooled enough, eg. I used refrigerator, but be gentle BTW best Antutu benchmark does not make a ROM the best . For me stability is more important.
regards Filozof71
Ive got 143K antutu score 15s version.
black screen no boot twrp
georgesalo said:
Ive got 143K antutu score 15s version.
Click to expand...
Click to collapse
Hello everyone,
I have a problem with my leeco Le max 2 - 6gb/64gb (x820).
I installed the ROM EUi cuoco92 and I would like to install a new rom (lineageOS 7.1.2 for LeEco MAX2)
I installed a new recovery on the official site, I followed the steps (install adb, drivers, unlock the boot loader ok and install Twrp)
When I finish it is not going to start on the twrp at startup there's marked recovery then a black screen and it vibrates several times to finally start normally on the old ROM)
Trwp no loadind or booting same for recovery Eui !
I responded to the manipulation several times, I do not know what to do
Thank you and your help
azerty321123 said:
Hello everyone,
I have a problem with my leeco Le max 2 - 6gb/64gb (x820).
I installed the ROM EUi cuoco92 and I would like to install a new rom (lineageOS 7.1.2 for LeEco MAX2)
I installed a new recovery on the official site, I followed the steps (install adb, drivers, unlock the boot loader ok and install Twrp)
When I finish it is not going to start on the twrp at startup there's marked recovery then a black screen and it vibrates several times to finally start normally on the old ROM)
Trwp no loadind or booting same for recovery Eui !
I responded to the manipulation several times, I do not know what to do
Thank you and your help[/QUOTE
Hey Dude if you wouldn't flashed SuperSU then its Normal.So first of all you flashed SuperSU using Twrp..
Click to expand...
Click to collapse
OK, so I flashed TWRP and now I have sort of a halfway bricked x829- I can load TWRP and Fastboot, that's it. I can't adb sideload anything because I get a "cannot read" error. I also can't Fastboot flash anything because all the ROMs I can find are zip files, and not .img files. What am I doing wrong?
Wagmans said:
OK, so I flashed TWRP and now I have sort of a halfway bricked x829- I can load TWRP and Fastboot, that's it. I can't adb sideload anything because I get a "cannot read" error. I also can't Fastboot flash anything because all the ROMs I can find are zip files, and not .img files. What am I doing wrong?
Click to expand...
Click to collapse
ok why do you even want to flash the rom with adb/fastboot?
even if you forgot to cp the rom onto the sdcard - just flash with twrp from a stick - OTG works fine
Horsebeatsbishop said:
ok why do you even want to flash the rom with adb/fastboot?
even if you forgot to cp the rom onto the sdcard - just flash with twrp from a stick - OTG works fine
Click to expand...
Click to collapse
OTG not working for me either. I have a USB C to standard USB adapter and it doesn't see any flash drives (I can see the drive being accessed- the light flashes, but doesn't mount). Do I need a USB OTG C Y adapter? I'm a bit lost why I can't just adb sideload.
Someone explain it to me like I'm a child. Obviously I'm doing something wrong and I'm missing something.
Wagmans said:
OTG not working for me either. I have a USB C to standard USB adapter and it doesn't see any flash drives. Do I need a USB OTG C Y adapter? I'm a bit lost why I can't just adb sideload.
Someone explain it to me like I'm a child. Obviously I'm doing something wrong and I'm missing something.
Click to expand...
Click to collapse
ok sounds like a toughie - never had a problem with OTG (neither with fat32 nor ntfs both works (twpr 3.0.2.1 myself) )
since i'm just a beginner myself i can only give you ideas where i would look:
-do you even see your device in adb service?
-enabled usb-debug?
-current usb driver?
-current adb version?
-correct adb version (32/64b)?
Horsebeatsbishop said:
ok sounds like a toughie - never had a problem with OTG (neither with fat32 nor ntfs both works (twpr 3.0.2.1 myself) )
since i'm just a beginner myself i can only give you ideas where i would look:
-do you even see your device in adb service?
-enabled usb-debug?
-current usb driver?
-current adb version?
-correct adb version (32/64b)?
Click to expand...
Click to collapse
I flashed TWRP properly- but when I put it into recovery I get half a corrupted screen- after the screen goes off if I press the power button I can access TWRP.
I tried flashing multiple flash drives in different formats- yes, I can see the drive LEDs flash after I insert it, but when I try to mount it says "0" space for all drives.
So, I assume everything is working properly because adb can see the device in sideload mode (Win 10 device mgr shows it as a USB device, when in TWRP (no sideload mode) it sees it as ADB device- but when I try to run ADB it doesn't show any devices):
List of devices attached
17963e29 sideload
No devices listed when sideload in TWRP is off.
I should be able to sideload something, but I get:
loading: 'le_x2_x820-5.9.020S.zip'
* cannot read 'le_x2_x820-5.9.020S.zip' *
Every time- every file.
Bricked?
are you using the official twrp ?
you should... https://twrp.me/devices/leecolemax2.html
or use multirom.
you can also transfer the rom first using mtp (in twrp).and flash afterwards.
Gesendet von meinem LEX820 mit Tapatalk
A.N.Droid said:
are you using the official twrp ?
you should... https://twrp.me/devices/leecolemax2.html
or use multirom.
you can also transfer the rom first using mtp (in twrp).and flash afterwards.
Gesendet von meinem LEX820 mit Tapatalk
Click to expand...
Click to collapse
FlashTools64_20161125.zip
I figured it out. I had to download FlashTools64 from Asus in order to sideload the file without the "cannot read" error. Well, that took me all morning.
This should be posted in the TWRP sticky.
I'm sideloading a rom right now. Let's see what happens...
Wagmans said:
FlashTools64_20161125.zip
I figured it out. I had to download FlashTools64 from Asus in order to sideload the file without the "cannot read" error. Well, that took me all morning.
This should be posted in the TWRP sticky.
I'm sideloading a rom right now. Let's see what happens...
Click to expand...
Click to collapse
looks like the standard 15 sec adb installer to me... seems u had the wrong version
Horsebeatsbishop said:
looks like the standard 15 sec adb installer to me... seems u had the wrong version
Click to expand...
Click to collapse
I don't know- I dowloaded it right from the link in the TWRP thread.
Anyways. now when I'm sideloading a ROM it times out at 46% every time (TWRP stops sideload mode). Any ideas?
Wagmans said:
I don't know- I dowloaded it right from the link in the TWRP thread.
Anyways. now when I'm sideloading a ROM it times out at 46% every time (TWRP stops sideload mode). Any ideas?
Click to expand...
Click to collapse
I had sort of the same problem, your not encrypted are you?
Supertacomonkeyexplosion said:
I had sort of the same problem, your not encrypted are you?
Click to expand...
Click to collapse
Nope. Unless I can sideload a ROM I'm stuck because TWRP won't mount a flash drive for me.
why dont you transfer the zip first with mtp?
Gesendet von meinem LEX820 mit Tapatalk
Wagmans said:
Nope. Unless I can sideload a ROM I'm stuck because TWRP won't mount a flash drive for me.
Click to expand...
Click to collapse
You can't boot the OS at all ?
I flashed twrp, couldn't backup,side load or read any OTG. I ended up booting back into my stock OS, loosing twrp, putting teamspain cm13 on, reflashing twrp from fastboot then immediately booting into twrp and flashing CM zip.
Mine was encryption problem though, cm let me decrypt and twrp started working right
Supertacomonkeyexplosion said:
You can't boot the OS at all ?
I flashed twrp, couldn't backup,side load or read any OTG. I ended up booting back into my stock OS, loosing twrp, putting teamspain cm13 on, reflashing twrp from fastboot then immediately booting into twrp and flashing CM zip.
Mine was encryption problem though, cm let me decrypt and twrp started working right
Click to expand...
Click to collapse
Nope. Just TWRP, that's it. As for MTP it doesn't even show up- just as a Android ADB Device in the drivers when in TWRP, and as a USB Device in TWRP Sideload mode. Remember, I'm stuck in either TWRP or Fastboot mode.
Wagmans said:
Nope. Just TWRP, that's it. As for MTP it doesn't even show up- just as a Android ADB Device in the drivers when in TWRP, and as a USB Device in TWRP Sideload mode. Remember, I'm stuck in either TWRP or Fastboot mode.
Click to expand...
Click to collapse
you have strange issues. are you sure you installed the right twrp version for your device? a link would help.
about adb:
i'm using universal ADB drivers and it just works.
http://adbdriver.com
Gesendet von meinem LEX820 mit Tapatalk
Wagmans said:
Nope. Just TWRP, that's it. As for MTP it doesn't even show up- just as a Android ADB Device in the drivers when in TWRP, and as a USB Device in TWRP Sideload mode. Remember, I'm stuck in either TWRP or Fastboot mode.
Click to expand...
Click to collapse
Strange that you lost your OS just flashing a recovery image, I've never seen that before. My last suggestion would be to fastboot flash a earlier version of TWRP.
Not sure of you seen this..... Last resort if you can't figure it out
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
Getting closer- I gave up on sideloading and I was finally able to push a ROM to the phone.
Thanks for all the help guys. Now running Chinese .20s ROM. Took long enough.lol
Wagmans said:
Getting closer- I gave up on sideloading and I was finally able to push a ROM to the phone.
Thanks for all the help guys. Now running Chinese .20s ROM. Took long enough.lol
Click to expand...
Click to collapse
Glad you figured it out.
Your running Chinese 20s on x829?
Lots of people will be interested to know how it runs..... Fingerprint? Language? Band 20? VoLTE?
Supertacomonkeyexplosion said:
Glad you figured it out.
Your running Chinese 20s on x829?
Lots of people will be interested to know how it runs..... Fingerprint? Language? Band 20? VoLTE?
Click to expand...
Click to collapse
Been playing with it a bit:
Shows as X820 with 64GB
Fingerprint still doesn't work for me
Google Voice doesn't work- at least I haven't figured it out (Doesn't recognize "OK Google"- I have to go into the app by hand).
Same problem- no VoLTE on AT&T here in US (didn't think it would work- unsupported phone). On Band 2 with LTE (cycled it- was on band 17 before). Haven't checked the other bands yet.
Lots of bloatware. That I can deal with. If I can't get Google voice recognition working properly I'll probably go to a custom ROM.
Wagmans said:
Getting closer- I gave up on sideloading and I was finally able to push a ROM to the phone.
Thanks for all the help guys. Now running Chinese .20s ROM. Took long enough.lol
Click to expand...
Click to collapse
You should share how did u fix it for helping other people in the future
Enviado desde mi ASUS_Z00TD mediante Tapatalk
hey,
i just unlocked the bootloader of my note 4 then i tried to install the twrp via command line.
i always get the error message remote: dtb not found when starting the twrp via the command line.
when i try to boot into twrp via volume up+power button i only see a screen with a usb cable.
i read in different forums that people installed the wrong twrp, so which one is the correct version for my redmi note 4?
i have the android 6.0.1 MMB29M version.
device info:
device tampered: false
device unlocked: true
device critical unlocked: true
charger screen enabled: false
THX FOR YOUR HELP!!
btw, its the global version
johnkevin123 said:
hey,
i just unlocked the bootloader of my note 4 then i tried to install the twrp via command line.
i always get the error message remote: dtb not found when starting the twrp via the command line.
when i try to boot into twrp via volume up+power button i only see a screen with a usb cable.
i read in different forums that people installed the wrong twrp, so which one is the correct version for my redmi note 4?
i have the android 6.0.1 MMB29M version.
device info:
device tampered: false
device unlocked: true
device critical unlocked: true
charger screen enabled: false
THX FOR YOUR HELP!!
btw, its the global version
Click to expand...
Click to collapse
You've MTK variant or snapdragon one?
Anyway, once you install twrp using fastboot flash recovery recoveryname.img ,then do not reboot, just keep the device connected and use this command to boot to twrp fastboot boot recoveryname.img
sachin n said:
You've MTK variant or snapdragon one?
Anyway, once you install twrp using fastboot flash recovery recoveryname.img ,then do not reboot, just keep the connected and use this command to boot to twrp fastboot boot recoveryname.img
Click to expand...
Click to collapse
hey sachin_n,
thxxx so much for your help, i always rebooted and then tried to use twrp instead of switching directly to it!
btw, i have the snapdragon version!
is there anything i should install now (new android version?!)
thx!
johnkevin123 said:
hey sachin_n,
thxxx so much for your help, i always rebooted and then tried to use twrp instead of switching directly to it!
btw, i have the snapdragon version!
is there anything i should install now (new android version?!)
thx!
Click to expand...
Click to collapse
Yep.
Check here *Xiaomi Redmi Note 4 [Snapdragon] ROMs, Kernels, Recoveries, & Other Development and pick one, flash it.
And do flash cm14.1 firmware if you're coming from Android 6 based Miui.
Sent from my Redmi Note 4 using Tapatalk
sachin n said:
Yep.
Check here *Xiaomi Redmi Note 4 [Snapdragon] ROMs, Kernels, Recoveries, & Other Development and pick one, flash it.
And do flash cm14.1 firmware if you're coming from Android 6 based Miui.
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
thx for the great help!
can you please give me a link to
a) most stable/well balanced rom or should i stay with the original?
b)cm14.1 fw?
thx so much!
johnkevin123 said:
thx for the great help!
can you please give me a link to
a) most stable/well balanced rom or should i stay with the original?
b)cm14.1 fw?
thx so much!
Click to expand...
Click to collapse
Eh, there are tons of roms to choose from. As of my experience, if you want more customizations then go for ResurrectionRemix or AospExtended rom otherwise stick to LineageOS 14.1 latest build.
Yep, link to firmware :- https://www.androidfilehost.com/?fid=817550096634766008
Note that, flash the above mentioned firmware before installing any rom.
how to stay with stockrom? is it really that bad?
and whats the difference between the aforementioned firmware and rom?
thx for the noob question answers
johnkevin123 said:
hey,
i just unlocked the bootloader of my note 4 then i tried to install the twrp via command line.
i always get the error message remote: dtb not found when starting the twrp via the command line.
when i try to boot into twrp via volume up+power button i only see a screen with a usb cable.
i read in different forums that people installed the wrong twrp, so which one is the correct version for my redmi note 4?
i have the android 6.0.1 MMB29M version.
device info:
device tampered: false
device unlocked: true
device critical unlocked: true
charger screen enabled: false
THX FOR YOUR HELP!!
btw, its the global version
Click to expand...
Click to collapse
Try twrp ver 3.0.3.0
johnkevin123 said:
how to stay with stockrom? is it really that bad?
and whats the difference between the aforementioned firmware and rom?
Click to expand...
Click to collapse
Stock Miui is not bad. Stay with that if you like it. But if you install twrp on stock Miui don't forget to flash lazyflasher or you will get a bootloop.
Stock ROM stable is based on Android 6. Custom ROMs usually base on Android7. Because of that you better flash Android 7 Firmware before flashing a custom ROM.
Gesendet von meinem Redmi Note 4 mit Tapatalk
cy_coe said:
Stock Miui is not bad. Stay with that if you like it. But if you install twrp on stock Miui don't forget to flash lazyflasher or you will get a bootloop.
Stock ROM stable is based on Android 6. Custom ROMs usually base on Android7. Because of that you better flash Android 7 Firmware before flashing a custom ROM.
Gesendet von meinem Redmi Note 4 mit Tapatalk
Click to expand...
Click to collapse
i will stay with the stockrom for the first time. i just flashed lazy today.
i now discovered another problem...
when the phone is connected via USB with my pc, it only charges.
i changed it to MTP in in developer options, but it wont work.....
sachin n said:
You've MTK variant or snapdragon one?
Anyway, once you install twrp usingfastboot flash recovery recoveryname.img ,then do not reboot, just keep the device connected and use this command to boot to twrp fastboot boot recoveryname.img
Click to expand...
Click to collapse
Hey sachin i am also facing that same problem and i tried your solution but it is still giving that dtb error
travishtaz said:
Hey sachin i am also facing that same problem and i tried your solution but it is still giving that dtb error
Click to expand...
Click to collapse
Screenshot please?
Here it is
travishtaz said:
Here it is
Click to expand...
Click to collapse
Either Rename the recovery to recovery.img and Reflash the twrp and try to boot with the command "fastboot boot recovery.img''
Or once it's done flashing twrp, do not disconnect your device, just use physical buttons combo and enter into twrp. Iie; volume up +power key.
Thnxxx for your response
But i have downloaded twrp_mido (twrp 3.0.3.0) and flashed it, this recovery is working fine
travishtaz said:
Thnxxx for your response
But i have downloaded twrp_mido (twrp 3.0.3.0) and flashed it, this recovery is working fine
Click to expand...
Click to collapse
Alrighty then :good:
I´m having this same error but I can´t get through it.
I have the Redmi Note 4 with MIUI 9 and Android 7.x and I tried all the available recovery images I found for this model
The flash seems to work but the reboot doesn´t
Any idea?
if you install twrp on stock Miui don't forget to flash lazyflasher or you will get a bootloop.
Pls help me i m getting this remote dtb not found error in my mi note 4
johnkevin123 said:
hey sachin_n,
thxxx so much for your help, i always rebooted and then tried to use twrp instead of switching directly to it!
btw, i have the snapdragon version!
is there anything i should install now (new android version?!)
thx!
Click to expand...
Click to collapse
Sachin said:
You've MTK variant or snapdragon one?
Anyway, once you install twrp using fastboot flash recovery recoveryname.img ,then do not reboot, just keep the device connected and use this command to boot to twrp fastboot boot recoveryname.img
Click to expand...
Click to collapse
please help me with this iam not able to boot its telling dtb not found or too many links