Hello.
Just wondered if anyone else was having the auto brightness setting reset to auto after every restart. I have mine in manual, but once I restart the phone it goes back to the factory setting for auto.??
Anyone else having this issue.??
DANIELWHITT said:
Hello.
Just wondered if anyone else was having the auto brightness setting reset to auto after every restart. I have mine in manual, but once I restart the phone it goes back to the factory setting for auto.??
Anyone else having this issue.??
Click to expand...
Click to collapse
YES! Happening to me too
Same as you here.
DANIELWHITT said:
Hello.
Just wondered if anyone else was having the auto brightness setting reset to auto after every restart. I have mine in manual, but once I restart the phone it goes back to the factory setting for auto.??
Anyone else having this issue.??
Click to expand...
Click to collapse
On Mate 10? Mate 10 pro? What is your software version?
Not happening to me on Mate 10 Pro BLA-29, SW version127.
It's on a mate 10 pro. BLA-L09 C432 127, happened on 125 aswell. Auto brightness on this phone is a tad quirky anyway. Chrome even on manual adjusts the brightness.
Hi, no news for this bug?
Happening to me too on mate 10 Middle East version alp 029. Anyone contacted huawei?
Related
Hi folks,
I have had this issue a few times now, basically when I try to tun wifi on using the quick settings tile it doesn't come on, if I then go into settings-wifi & try to turn it on using the toggle the toggle moves but doesn't change to the blue colour or say it is on, it just goes a light blue colour, if I then back out of settings & try again the toggle is back to off. I then basically have to turn the phone off & then back on (the quick boot feature in developer settings doesn't do anything) & when it boots up wifi is on.
Anybody else had this issue? The phone is getting replaced in a few days due to gap issues, over heating & camera lens not being centred anyway but just though I would check.
Cheers.
No one else have this issue?
BanziBaby said:
No one else have this issue?
Click to expand...
Click to collapse
I had this issue on .55 firmware. Haven't noticed it on .69 yet.
Cheers for the reply Jackos.
I had it both on the .55 firmware as well as the .69 firmware, have done factory reset etc but it still happens every few days, really stumped by it.
BanziBaby said:
Cheers for the reply Jackos.
I had it both on the .55 firmware as well as the .69 firmware, have done factory reset etc but it still happens every few days, really stumped by it.
Click to expand...
Click to collapse
I think I saw someone posting this issue at Sony Support Forums, let's hope they fix this in the next firmware revisions.
I'll keep you posted if this happens to me again on .69.
I have this happening to me, on .69 fw. Normally a restart will do.
Sent from my D6503 using XDA Premium 4 mobile app
@Jackos Cheers for keeping us posted mate
@pohsze Yeah mate, only way I have found so far to resolve it is to power off then back on, strange thing is wifi is on when phone finishes booting lol.
I have the exact same problem and I am on .55.
Sometimes I can't even turn Wifi off so I have to reboot. It is really weird because I don't know what triggers the bug.
I almost decided to return the phone but it is hard to recreate the error, and a reboot fixes it so I don't know if my phone company will accept the bug.
Since others have the same problem I hope they fix it in the new updates. Will come back when the .69 is released here.
I have same problem - switching in & out of AIrport mode cleared it.
I have the same problem.
First time I encountered it this morning.
Not sure from when wifi was not working for me.
In wifi settings no networks were shown.
Turning on wifi button would go light blue . . . but nothing would happen.
I selected Airport mode. Waited a moment. Then exited Airport mode . . . and wifi started working.
I'm on firmware .55
BanziBaby said:
Hi folks,
I have had this issue a few times now, basically when I try to tun wifi on using the quick settings tile it doesn't come on, if I then go into settings-wifi & try to turn it on using the toggle the toggle moves but doesn't change to the blue colour or say it is on, it just goes a light blue colour, if I then back out of settings & try again the toggle is back to off. I then basically have to turn the phone off & then back on (the quick boot feature in developer settings doesn't do anything) & when it boots up wifi is on.
Anybody else had this issue? The phone is getting replaced in a few days due to gap issues, over heating & camera lens not being centred anyway but just though I would check.
Cheers.
Click to expand...
Click to collapse
Hey I get it sometimes too, just press and hold on the wifi icon and then manually turn wifi on in the wifi settings, works fine after that. Just a minor bug.
I have also experienced the exact same problem on the newest firmware. Only happened once, and going in to the actual WiFi settings didn't solve it, since the button turned light blue as described. Strangely after a little while when the phone was inactive it started working all by itself.
Phones:
Samsung Galaxy S I9000
Asus Padfone 2
Sony Xperia Z2
____________________________
Android user since mid 2010
Same issue
Hello all,
I have the same problem when I tried to turn Wifi on by accessing Quick Settings and pressing Wifi button.
It works again after 10-15 times pressing Wifi icon.
It just happened last few days and I didn't have any system update recently.
Im also having the same issue. Anyone managed to get a fix for this?
Same issue
Im also having the same issue.
Anyone had a solution for this :/ ?
I don't think i have this issue yet since I just got the phone, but I remember when I setup my wifi connection there was an option to enable/disable wifi based on location. Could it be that the phone's GPS location hasn't update yet and think you are close to your wifi location thus won't let you turn on? May be disable this feature and report back if you guys still have this issue.
I am on .167 and this is happening to me more and more often it seems like it is getting worse. If I go into settings/wifi I get a white screen that says tunring wifi on and no further change. This usually starts occurring 18 hours or so after I reboot. It looks like no one has any idea what is wrong.
Fred
I have this same issue, a restart fixed this fora couple of days but now it seems the Wifi wont start up at all
Still had some warranty so returned the phone at the store that I bought it at.
Had the issue from the moment I got the phone from my gf (she has a new one) and did a factory reset.
After that I have flashed 3 different versions on it and for all the WiFi didn't work.
Let's see what happens after I get the phone back..
Hi all. I have been using a 6833 for about 5 months now and it has been problem free. Today while reading a book on aldiko i paused, locked the screen and later when i tried to wake the phone with the power button the backlight of the lcd turned on, but nothing appeared. Since then i have tried to restart the phone by pressing power+volup, the phone does the triple vibrate and shuts down but nothing appears on screen when i turn it back on. Same is the case with the hard reset, the red button under the flap. I have also tried to restore the phone by using flashtool and 108 ftf. The phone is detected properly by the computer but the display remains blank. Only the backlight turns on.
Any help in figuring this out would be appreciated.
Oh and just before this happened i had manually adjusted the screen brightness and turned auto backlighting off and then on.
makfreeman said:
Oh and just before this happened i had manually adjusted the screen brightness and turned auto backlighting off and then on.
Click to expand...
Click to collapse
when you did the FTF did you do a full wipe?
blueether said:
when you did the FTF did you do a full wipe?
Click to expand...
Click to collapse
Used Flashtool and wiped cache, data and appslog, i believe that means a full wipe.
I know the phone is on, i can use the touchscreen from memory for receiving calls. But there is no display. Since i bought it off of amazon i don't have any warranty on it either. Any help or guidance into diagnosing the problem would be appreciated.
Hi,
Had the same exact problem to solve it I actually had to sent it in Sony service to have it reinstated to factory settings.
Now everything is fine.
pavlos46 said:
Hi,
Had the same exact problem to solve it I actually had to sent it in Sony service to have it reinstated to factory settings.
Now everything is fine.
Click to expand...
Click to collapse
Could you elaborate on "reinstated to factory settings". Because sending it to sony is out of the question for me.
As far as i know, flashing a ftf means your phone is wiped completely so in essence its restored to factory settings.
Well I actually was under the exact same impression myself, even my local Sony support centre though so too but when we send it to the main support centre in Athens and they reinstated the problem got solved.
To me it seems that the main Sony support centres have different s/w for wiping and flashing.
Pavlos
pavlos46 said:
Well I actually was under the exact same impression myself, even my local Sony support centre though so too but when we send it to the main support centre in Athens and they reinstated the problem got solved.
To me it seems that the main Sony support centres have different s/w for wiping and flashing.
Pavlos
Click to expand...
Click to collapse
That sounds promising. I'll be back in the US in april maybe i can send it in for repair then.
This device has dynamic backlight that if I am correct was adjustable on versions until 4.3 so have a good look around for that ftf. I presume you are on a non Gpe version.
Also have you used a manual brightness app, cause you could have just turned your backlight way down, try by memory to turn autobrightness back on. Easiest way by quick settings.
Pavlos
pavlos46 said:
This device has dynamic backlight that if I am correct was adjustable on versions until 4.3 so have a good look around for that ftf. I presume you are on a non Gpe version.
Also have you used a manual brightness app, cause you could have just turned your backlight way down, try by memory to turn autobrightness back on. Easiest way by quick settings.
Pavlos
Click to expand...
Click to collapse
Are yiou suggesting that brightness could have been set very low and even flashing a FTF wouldn't have fixed it? Just before this issue happend i was turned off the autobacklight and turned it back on.
Hello, my phone keeps changing resolution in games, even with the option Smart screen turned off. Any ideas? I have phone 2nd day And IT IS Up to date.
Thank you
Plzenak92 said:
Hello, my phone keeps changing resolution in games, even with the option Smart screen turned off. Any ideas? I have phone 2nd day And IT IS Up to date.
Thank you
Click to expand...
Click to collapse
Try factory reset your phone.
Hi Guys!
I just bought the new Redmi Note 9s in Europe (which is the Note 9 Pro in India)
My problem is after I set my fingerprint, the system unlocks the phone I can hear the clicking sound but the screen do not turn on, or it turns on but just after a couple of seconds. Sometimes it works correctly. And I know that my phone is unlock cuz even though the screen is all black I still can interact with the phone, open apps etc.
It happnes when fingerprint unlock is off. The problem is wiht the screen most likely
Tried factory reseting but it did not help.
Has anyone experienced the same problem? Is this a faulty unit?
Thanks in advance
same. have you found the solution?
Which firmware / ROM version are you on?
I took the OTA update for my AT&T LM-V600AM (LGV60). This put me onto software version "V600AM10w", with the December 1st, 2020 security patch. I have attached screen shot. Since the update, my AOD (always-on-display) will not work. I have deleted the cache and restarted, I have deleted and redownloaded the AOD's I wanted and reinstalled them. I have toggled the AOD on and off. No luck. I am out of ideas. Does anyone have a clue? phone info here.
Does it do anything when you set it to only display for 10 seconds? Do you have a Google nest device that sends you notifications?
masondoctorjt said:
Does it do anything when you set it to only display for 10 seconds? Do you have a Google nest device that sends you notifications?
Click to expand...
Click to collapse
Thanks for your reply!
I did a factory reset in an attempt to fix this. No luck. I believe it was the last software update that caused this.
No to Google Nest.
If I set it to display for 10 seconds, it flashes rapidly.... it blinks on and off very fast. Eventually it stops blinking on and off very fast and just disappears.
If I set it to always on, it does nothing. Screen just goes blank.
draexo said:
Thanks for your reply!
I did a factory reset in an attempt to fix this. No luck. I believe it was the last software update that caused this.
No to Google Nest.
If I set it to display for 10 seconds, it flashes rapidly.... it blinks on and off very fast. Eventually it stops blinking on and off very fast and just disappears.
If I set it to always on, it does nothing. Screen just goes blank.
Click to expand...
Click to collapse
Yes, mine does the exact same thing. But I found it was the nest notification on my device. As soon as I swipe it away my AOD works properly again. I wonder if it is a notification of some sort on yours too? I also factory reset and all that, turns out for no reason.
You might be on to something. I cleared all my notifications and let the AOD kick in and it is fine. I guess I just need to figure out which one it is.
draexo said:
I took the OTA update for my AT&T LM-V600AM (LGV60). This put me onto software version "V600AM10w", with the December 1st, 2020 security patch. I have attached screen shot. Since the update, my AOD (always-on-display) will not work. I have deleted the cache and restarted, I have deleted and redownloaded the AOD's I wanted and reinstalled them. I have toggled the AOD on and off. No luck. I am out of ideas. Does anyone have a clue? phone info here.
Click to expand...
Click to collapse
Sent wit
draexo said:
I took the OTA update for my AT&T LM-V600AM (LGV60). This put me onto software version "V600AM10w", with the December 1st, 2020 security patch. I have attached screen shot. Since the update, my AOD (always-on-display) will not work. I have deleted the cache and restarted, I have deleted and redownloaded the AOD's I wanted and reinstalled them. I have toggled the AOD on and off. No luck. I am out of ideas. Does anyone have a clue? phone info here.
Click to expand...
Click to collapse
I have found that when I had set up the Bedtime Mode in the Digital Wellbeing settings that unless you turn off the "Keep the screen dark" in the Bedtime Mode customizations, the AOD will go dark. I hope this helps.