so...my p10 L29 was messed up after updating to oreo. i upgrade without rebranding, after that, my version shows bla bla bla(dont remember). after searching a lot on website (almost all of them), figure out that B217 firmware is the selution.
actually B217 firmware from ff finder has just 2 files, not 3. so using HWOT8 and change the update binary(with notepad++) you need go to META-INF>com>google>android>update-binary, open update-binary with notepad and delete the line with "echo - - update_package...... update_data public. zip.
after that copy the files to hwota8 > update file and make same process like you do to update.
after that, i rebrand my l29 to c432 and now all works fine:victory:
t.h.i said:
so...my p10 L29 was messed up after updating to oreo. i upgrade without rebranding, after that, my version shows bla bla bla(dont remember). after searching a lot on website (almost all of them), figure out that B217 firmware is the selution.
actually B217 firmware from ff finder has just 2 files, not 3. so using HWOT8 and change the update binary(with notepad++) you need go to META-INF>com>google>android>update-binary, open update-binary with notepad and delete the line with "echo - - update_package...... update_data public. zip.
after that copy the files to hwota8 > update file and make same process like you do to update.
after it's that i rebrand my l29 to c432 and now all works fine:victory:
Click to expand...
Click to collapse
So firmware 217 Is like a rollback?, I'm gonna try and Post lateral
MrAlez said:
So firmware 217 Is like a rollback?, I'm gonna try and Post lateral
Click to expand...
Click to collapse
yes it does
just don't forget to rebrand with full firmware after.
good luck
t.h.i said:
yes it does
just don't forget to rebrand with full firmware after.
good luck
Click to expand...
Click to collapse
Do you have a locked bootloader? Ir a relocked?, also, what was your version before? cause i cant find de c432 b217 firmware
MrAlez said:
Do you have a locked bootloader? Ir a relocked?
Click to expand...
Click to collapse
after the downgrade process, no.
after rebrand with a full version (i choose c432), yes
MrAlez said:
Do you have a locked bootloader? Ir a relocked?, also, what was your version before? cause i cant find de c432 b217 firmware
Click to expand...
Click to collapse
c900 B217
t.h.i said:
c900 B217
Click to expand...
Click to collapse
2 files
t.h.i said:
2 files
Click to expand...
Click to collapse
Have you upgraded to Oreo via official BETA? Or some beta build you found around XDA?
Buckthard said:
Have you upgraded to Oreo via official BETA? Or some beta build you found around XDA?
Click to expand...
Click to collapse
from ff finder.
in the beginning, to 8.0.0.311 and after that i flashed 8.0.0.321
more info please
can you please give HWOTA link and twrp thanks.
HWOTA8>https://drive.google.com/file/d/0B2D9GdWntw69U3N2aDEzZjY2S1E/view
TWRP for oreo>https://drive.google.com/file/d/0B45NCsO2AL_1NEh2aDFLM3JlYkU/view
t.h.i said:
HWOTA8>https://drive.google.com/file/d/0B2D9GdWntw69U3N2aDEzZjY2S1E/view
TWRP for oreo>https://drive.google.com/file/d/0B45NCsO2AL_1NEh2aDFLM3JlYkU/view
Click to expand...
Click to collapse
Will fastboot flashing the twrp works?
dmmercado23 said:
Will fastboot flashing the twrp works?
Click to expand...
Click to collapse
(fastboot
t.h.i said:
yes
use this: fastboot
Click to expand...
Click to collapse
I tried that method yesterday, but I cant get to recovery mode, it will go directly to erecovery. Should I use adb to reboot to recovery?
use this command:
fastboot flash recovery_ramdisk twrp_android_o_mate9_a1.img
and then, fastboot reboot recovery
I shared the "update-binary" file, I did not edit it with notepad ++
t.h.i said:
so...my p10 L29 was messed up after updating to oreo. i upgrade without rebranding, after that, my version shows bla bla bla(dont remember). after searching a lot on website (almost all of them), figure out that B217 firmware is the selution.
actually B217 firmware from ff finder has just 2 files, not 3. so using HWOT8 and change the update binary(with notepad++) you need go to META-INF>com>google>android>update-binary, open update-binary with notepad and delete the line with "echo - - update_package...... update_data public. zip.
after that copy the files to hwota8 > update file and make same process like you do to update.
after that, i rebrand my l29 to c432 and now all works fine:victory:
Click to expand...
Click to collapse
could you please share the update-binary, I don't find the line with notepad ++.
3D Fred said:
could you please share the update-binary, I don't find the line with notepad ++.
Click to expand...
Click to collapse
here you go...
t.h.i said:
here you go...
Click to expand...
Click to collapse
should be like this
t.h.i said:
should be like this
Click to expand...
Click to collapse
oh, it's in the zip file.. lol thanks
Related
Hi guys. I hava an Honor 7 how has number of versionLK-L01C636B330. I want to know what is the recent update for this version of Emui ? and if it exist where i can find it/
look on the chinese emui forum for your phone model
Iosifcosmin said:
Hi guys. I hava an Honor 7 how has number of versionLK-L01C636B330. I want to know what is the recent update for this version of Emui ? and if it exist where i can find it/
Click to expand...
Click to collapse
You can also google huawei firmware finder by team MT and use it to search for the latest firmware.
jkccl9 said:
look on the chinese emui forum for your phone model
Click to expand...
Click to collapse
I have Malayesia versoin
Iosifcosmin said:
I have Malayesia versoin
Click to expand...
Click to collapse
Huawei firmware finder by team MT is your best bet. It automatically searches different servers and gives you the firmware.
B350 is the latest update for your device.
But it should have arrived you via OTA already.
Check with HiSuite (or) HiCare app.
Update link - http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1046/g104/v60923/f1/full/update.zip
But since this is a zip file, I don't think you can update using this.
I'm not sure about the contents of the file. If the file contains only update.app then you can flash it manually.
vsriram92 said:
B350 is the latest update for your device.
But it should have arrived you via OTA already.
Check with HiSuite (or) HiCare app.
Update link - http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1046/g104/v60923/f1/full/update.zip
But since this is a zip file, I don't think you can update using this.
I'm not sure about the contents of the file. If the file contains only update.app then you can flash it manually.
Click to expand...
Click to collapse
The zip should contain update.app alone from my experience.
gopinaidu77 said:
The zip should contain update.app alone from my experience.
Click to expand...
Click to collapse
I mean to say that if there is any other thing apart from update.app, then this patch will not work properly.
vsriram92 said:
I mean to say that if there is any other thing apart from update.app, then this patch will not work properly.
Click to expand...
Click to collapse
Oh. Got it.
I own a Chinese AL00 Honor 9,B201 is so poor,so I am intending to downgrade to B136,or B155.However in FF the lowest version I can find for my phone is B190:crying:
I verified the B136 for AL10 with IMEI,miraculously it passed,saying the firmware I will install is AL00C00B136.But when I finish the DNS changing I found I still only can get AL10C00B136.
Any idea on this issue is appreciated
Check here:
https://forum.xda-developers.com/honor-9/development/honor-9-stock-rom-b136-root-built-china-t3632616
https://forum.xda-developers.com/honor-9/development/honor-9-stock-rom-b155-root-built-china-t3637120
kac222 said:
Check here:
https://forum.xda-developers.com/ho...or-9-stock-rom-b136-root-built-china-t3632616
https://forum.xda-developers.com/ho...or-9-stock-rom-b155-root-built-china-t3637120
Click to expand...
Click to collapse
Thanks so much!One question,will my bl be unlocked and lose my warranty?
Sent from my Huawei Honor 9 using XDA Labs
I handed over to the service in Poland with unlkock bootloader and there was no problem.
It depends on the service.
Normally your warranty is woid now.
How about download via FF and flash in the 3-button-mode?
Sent from my Huawei Honor 9 using XDA Labs
hujialun2002 said:
How about download via FF and flash in the 3-button-mode?
Sent from my Huawei Honor 9 using XDA Labs
Click to expand...
Click to collapse
Hi! what is the difference between B201 and B136 or B155?
BTW, I had AL00C00B201 flashed to L09C432B130, but it is very poor compared to AL00C00B201.
Now I want to go back to AL00C00B201 but I dont know how to do it...
oblivion2222 said:
Hi! what is the difference between B201 and B136 or B155?
BTW, I had AL00C00B201 flashed to L09C432B130, but it is very poor compared to AL00C00B201.
Now I want to go back to AL00C00B201 but I dont know how to do it...
Click to expand...
Click to collapse
Perhaps you need the HWOTA Rebrand method to AL00,I guess.Maybe you can use the B123 Service Repair Firmware but I AM NOT SURE
For the differences,they say that B201 underclock the CPU for better battery usage(ironically I didn't feel any improvement),but B123 and B136 aren't.I don't know about B155.So if you are a heavy gamer B201 may be a nightmare What's more B201 is in conflict with several Apps so they will evaporate into thin air after reboot...
Do notice that package for AL00 and AL10 are exactly the same.And the model number will be unchanged even flashing the AL10 firmware.I tested myself downgrading.And don't forget to wipe data.
hujialun2002 said:
Perhaps you need the HWOTA Rebrand method to AL00,I guess.Maybe you can use the B123 Service Repair Firmware but I AM NOT SURE
For the differences,they say that B201 underclock the CPU for better battery usage(ironically I didn't feel any improvement),but B123 and B136 aren't.I don't know about B155.So if you are a heavy gamer B201 may be a nightmare What's more B201 is in conflict with several Apps so they will evaporate into thin air after reboot...
Do notice that package for AL00 and AL10 are exactly the same.And the model number will be unchanged even flashing the AL10 firmware.I tested myself downgrading.And don't forget to wipe data.
Click to expand...
Click to collapse
how about the app bundles?
because there are many more apps on c00b201 than on c432b130...
oblivion2222 said:
how about the app bundles?
because there are many more apps on c00b201 than on c432b130...
Click to expand...
Click to collapse
Are you referring to the Chinese Apps?Well,they are no harm,and you can always uninstall them allI uninstalled right after turning on the phone
hujialun2002 said:
Are you referring to the Chinese Apps?Well,they are no harm,and you can always uninstall them allI uninstalled right after turning on the phone
Click to expand...
Click to collapse
Are you still on b201?
I am looking for a AL00C00B01 firmware etc. and you would help a lot if you can send it to me...
oblivion2222 said:
Are you still on b201?
Click to expand...
Click to collapse
Nope.Im on .341:laugh:Isn't it available on FF?
hujialun2002 said:
Nope.Im on .341:laugh:Isn't it available on FF?
Click to expand...
Click to collapse
Do you know a way to rebrand and downgrade to b201?
All the tutorials I found are for rebranding into EU phones and I want to come back to CN
oblivion2222 said:
Do you know a way to rebrand and downgrade to b201?
All the tutorials I found are for rebranding into EU phones and I want to come back to CN
Click to expand...
Click to collapse
If my mind is working properly,When it comes to select OEMinfo you can select to Rebrand to C00.All left to do should be replacing the EU Firmware with CN ones(can be downloaded on FF).I didn't try it so can't promise it's working
hujialun2002 said:
If my mind is working properly,When it comes to select OEMinfo you can select to Rebrand to C00.All left to do should be replacing the EU Firmware with CN ones(can be downloaded on FF).I didn't try it so can't promise it's working
Click to expand...
Click to collapse
I'm trying to do that for 5 hours now but it doesnt work
I tried to rebrand to AL00C00 first but after reboot, it is still L09C432
---------- Post added at 06:47 PM ---------- Previous post was at 06:43 PM ----------
the oeminfo file is copied onto the sdcard, but after that it says:
dd: /storage/sdcard1/oeminfo: no such files or directory
oblivion2222 said:
I'm trying to do that for 5 hours now but it doesnt work
I tried to rebrand to AL00C00 first but after reboot, it is still L09C432
---------- Post added at 06:47 PM ---------- Previous post was at 06:43 PM ----------
the oeminfo file is copied onto the sdcard, but after that it says:
dd: /storage/sdcard1/oeminfo: no such files or directory
Click to expand...
Click to collapse
Sorry for the late reply,it was 2:30 am that time here
People experience problems but that is about"tmp/oeminfo",not your problem...
I remember seeing a post about flashing it manually in terminal but can't find it now...
hujialun2002 said:
Sorry for the late reply,it was 2:30 am that time here
People experience problems but that is about"tmp/oeminfo",not your problem...
I remember seeing a post about flashing it manually in terminal but can't find it now...
Click to expand...
Click to collapse
thanks for answering.
there was two missing lines in the script, i managed to fix it.
but i can find the rights files for b201 (update, update_all_hw, update_data_public).
i copied an incomplete file, so adb installed a recovery version. i updated it with dload but it did not succeed...
oblivion2222 said:
thanks for answering.
there was two missing lines in the script, i managed to fix it.
but i can find the rights files for b201 (update, update_all_hw, update_data_public).
i copied an incomplete file, so adb installed a recovery version. i updated it with dload but it did not succeed...
Click to expand...
Click to collapse
The B201 files is on FF with number"88860"or"88861".It is under model STFAL10C00.There are 3 files to be renamed after downloading.Then the firmware change should work technically.
oblivion2222 said:
thanks for answering.
there was two missing lines in the script, i managed to fix it.
but i can find the rights files for b201 (update, update_all_hw, update_data_public).
i copied an incomplete file, so adb installed a recovery version. i updated it with dload but it did not succeed...
Click to expand...
Click to collapse
http://cn.club.vmall.com/forum.php?mod=viewthread&tid=13656801
I know this is about capacitive button fix but it should be exactly what you want.It contained the service Repair Firmware and a oeminfo_tool batch file which seems able to write oeminfo to CN and flash stock rec.It is also easier to use the 3-button-combo.
[/COLOR]
hujialun2002 said:
http://cn.club.vmall.com/forum.php?mod=viewthread&tid=13656801
I know this is about capacitive button fix but it should be exactly what you want.It contained the service Repair Firmware and a oeminfo_tool batch file which seems able to write oeminfo to CN and flash stock rec.It is also easier to use the 3-button-combo.
Click to expand...
Click to collapse
Thanks!
however meanwhile, also looks like the oeminfo file I installed was not AL00C00 but AL10C00...
So i'm stuck once again as I need AL00C00 oeminfo and b201 full firmware...
I'll try your link!
oblivion2222 said:
[/COLOR]
Thanks!
however meanwhile, also looks like the oeminfo file I installed was not AL00C00 but AL10C00...
So i'm stuck once again as I need AL00C00 oeminfo and b201 full firmware...
I'll try your link!
Click to expand...
Click to collapse
It is not that important due to the fact that AL00 and AL10 can use the same firmwares.I tried this method before and the model number did change to AL10 but nothing gets wrong.That time I didn't fully complete the guide.Seeing inside the package are separate folders of AL00 and AL10 I guess If the installation is done properly the model might not get wrong
Good luck!
Friends, if the firmware is not approved in FirmwareFinder we can only download and do not install??
It will download but It won't install. Since today it can't find any firmwares for the c432...
inthedark22 said:
It will download but It won't install. Since today it can't find any firmwares for the c432...
Click to expand...
Click to collapse
FF's database was down, it's back up now.
My firmware is the bla-L29 8.0.0.126 and I'm still with the March security patch.
To update, pay the Funkhuawei or wait for the update to arrive?
Hi,
HFF'S work properly for me, I have mate 10 pro L29-C185 this afternoon I find .133 firmware (previously I was on .126) downloading I just installed it. Everything it's ok
Is it possible to download the firmware and flash it with TWRP?
Lykeul said:
Hi,
HFF'S work properly for me, I have mate 10 pro L29-C185 this afternoon I find .133 firmware (previously I was on .126) downloading I just installed it. Everything it's ok
Click to expand...
Click to collapse
was it approved? what method did you use to install?
Buran79 said:
was it approved? what method did you use to install?
Click to expand...
Click to collapse
For downloading firmware I use in-app method and after download use update button from huawei system, you know in settings->system->update system
Psych Engel said:
Is it possible to download the firmware and flash it with TWRP?
Click to expand...
Click to collapse
You can using https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
I've tested it and it works on Mate 10 Pro
ante0 said:
You can using https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
I've tested it and it works on Mate 10 Pro
Click to expand...
Click to collapse
Thanks for answering. Where I've to place the files, because the Mate 10 Pro doesn't have a SD card?!
Lykeul said:
For downloading firmware I use in-app method and after download use update button from huawei system, you know in settings->system->update system
Click to expand...
Click to collapse
Was the firmware approved for download? In my bla-L29 8.0.0.126 says that the firmware are not approved for download, although it manages to download using FF itself.
Psych Engel said:
Thanks for answering. Where I've to place the files, because the Mate 10 Pro doesn't have a SD card?!
Click to expand...
Click to collapse
Internal storage, but you'd need to update TWRP to this one which has decryption support: https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904
rioferraz said:
Was the firmware approved for download? In my bla-L29 8.0.0.126 says that the firmware are not approved for download, although it manages to download using FF itself.
Click to expand...
Click to collapse
What your region cust? C185 C432 C576 C605...
ante0 said:
Internal storage, but you'd need to update TWRP to this one which has decryption support: https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904
Click to expand...
Click to collapse
I'm using this one. Was the first one with an BLA-L09 device. If I place it on the internal storage, won't it be deleted, because I've to wipe all partitions? Sry for so much questions, I only won't brick my phone. Now a lot about this stuff, but each phone is unique and has its own special things to look for.
Psych Engel said:
I'm using this one. Was the first one with an BLA-L09 device. If I place it on the internal storage, won't it be deleted, because I've to wipe all partitions? Sry for so much questions, I only won't brick my phone. Now a lot about this stuff, but each phone is unique and has its own special things to look for.
Click to expand...
Click to collapse
You don't need to Wipe anything. Internal sd is mounted in /data which is not wiped.
Well, it's either that or use HWOTA to update.
Or wait for firmware to be approved
Lykeul said:
What your region cust? C185 C432 C576 C605...
Click to expand...
Click to collapse
C605.
ante0 said:
You don't need to Wipe anything. Internal sd is mounted in /data which is not wiped.
Well, it's either that or use HWOTA to update.
Or wait for firmware to be approved
Click to expand...
Click to collapse
It's approved for my device. But it should be blocked on the device or I'm wrong. On my last devices, I wasn't able to update the original firmware from the system itself, because TWRP and Magisk were installed.
rioferraz said:
C605.
Click to expand...
Click to collapse
I find your firmware take the first of list, fullota-mf
Psych Engel said:
It's approved for my device. But it should be blocked on the device or I'm wrong. On my last devices, I wasn't able to update the original firmware from the system itself, because TWRP and Magisk were installed.
Click to expand...
Click to collapse
Yeah, you'd have to restore stock Recovery, and OTA might install (it checksums partitions and if they don't match the update fails)
You could still use Firmware finder to install FullOTA.
Lykeul said:
I find your firmware take the first of list, fullota-mf
Click to expand...
Click to collapse
Translating the dialog box: "The firmware is not approved for installation"
I was able to download the huawei pie full update zip and data from FF and how do i flash it using fstboot, do i just flash the system or do i have to flash all the partitions within the update.app as its changing to pie from oreo and what are the commands to flsh the partitions, nit sure if it will flash as it is still unapproved and bootloader might deny flashing it i am not sure, any ideas.
I was able to install the ff firmware using beta flashy 0.2 tool and all is well.
lingarajug said:
I was able to install the ff firmware using beta flashy 0.2 tool and all is well.
Click to expand...
Click to collapse
Did it wipe all your data?. Hopefully not.
I got the official update on my mate 10 pro
The version is 9.0.0.159
The downside is the camera app seems unstable, and crashes every so often..
matemade said:
Did it wipe all your data?. Hopefully not.
Click to expand...
Click to collapse
I already had this phone factory reseted when i moved to pixel 3xl do i don't know if it did anything.
chaos_envoys said:
I got the official update on my mate 10 pro
The version is 9.0.0.159
The downside is the camera app seems unstable, and crashes every so often..
Click to expand...
Click to collapse
I flashed 9.0.0.121
Did somebody receive B197 as OTA?
lingarajug said:
I flashed 9.0.0.121
Click to expand...
Click to collapse
Which model do you have?.
Bla a09 us
lingarajug said:
Bla a09 us
Click to expand...
Click to collapse
Sorry to revive such an old post but wanted to ask you how you used the flashy tool. Did you drop the 2 pie files into the "zips here" folder? Did you need to unzip the pie update files? Another post mentioned unzipping but maybe that was because it was a p20. Did you use the beta pie files or actual non beta files? Has it been able to get normal updates ota since then? Thank you
Hi, i have a mate 20 pro model c212 (at&t mexico), i want to install a new firmware for example c62 or c432, i can? or not? Pleas help me!
You could update main base easily, but that could screw the futur C212 stock OTA Updates if the new base version number you re flashing is not or won t be an official C212 base version number.
What is the matter with your LYA C212 ?
-still on emui9.0 and you want emui9.1 ?
-security patches date too old on latest C212 ?
oslo83 said:
You could update main base easily, but that could screw the futur C212 stock OTA Updates if the new base version number you re flashing is not or won t be an official C212 base version number.
What is the matter with your LYA C212 ?
-still on emui9.0 and you want emui9.1 ?
-security patches date too old on latest C212 ?
Click to expand...
Click to collapse
I am currently in version 9.1.320 of att mexico (212), but the Telcel version (C69) is updated faster, what I fear is that EMUI 10 does not arrive because of the att issue
Ok.
So no, there is no way to rebrand your M20P with a locked bootloader.
oslo83 said:
Ok.
So no, there is no way to rebrand your M20P with a locked bootloader.
Click to expand...
Click to collapse
And you know how to install an update if my operator does not?
You could use a service firmware to change cust, preload and base to a different region. I did this back and forth from C432 to C636 when I saw fit using the dload method.
Shaolin36 said:
You could use a service firmware to change cust, preload and base to a different region. I did this back and forth from C432 to C636 when I saw fit using the dload method.
Click to expand...
Click to collapse
dload will just skip the out-of-region cust and preload files ; only base will be applyed.
oslo83 said:
dload will just skip the out-of-region cust and preload files ; only base will be applyed.
Click to expand...
Click to collapse
Hm, when I used FH a while back it switched me to C636 - and every OTA I received was C636 - I couldn't return to C432 via any method until I tried dload and it worked for me. It may be because my device is natively C432.
I still don t understand how these previous FH updates managed to softrebrand just fine kirin980 devices.
Your build number once rebranded, in about phones, was then C636ExRyPz or you were missing the RyPz part?
oslo83 said:
I still don t understand how these previous FH updates managed to softrebrand just fine kirin980 devices.
Your build number once rebranded, in about phones, was then C636ExRyPz or you were missing the RyPz part?
Click to expand...
Click to collapse
Included RP section, so it successfully rebranded, and then I managed to move back to C432 using dload.
Shaolin36 said:
Included RP section, so it successfully rebranded, and then I managed to move back to C432 using dload.
Click to expand...
Click to collapse
Is it currently possible to do? For the bootloader issue, can you show me the guide you followed to flash?
Prounder15 said:
Is it currently possible to do? For the bootloader issue, can you show me the guide you followed to flash?
Click to expand...
Click to collapse
There will be guides around on our device forum. But basically requirements:
USB Stick (formatted exFAT)
USB OTG
You will need to download the service firmware, for this I used androidhost ru and firmware 9.1.0.300 C432.
You will have 3 zip files inside the firmware, you must create a folder on the USB stick called 'dload' and inside this folder you put the three zip files (named like update_sd_base.zip etc). Plug USB stick into device with OTG adapter and then open dialer and type *#*#2846579#*#* and choose software upgrade then memory card upgrade. Should restart and upgrade device to your new firmware (don't unplug USB during this process and make sure you have above 30% battery)
I though he was speaking about how to softrebrand with FunkyHuawei...
oslo83 said:
I though he was speaking about how to softrebrand with FunkyHuawei...
Click to expand...
Click to collapse
Well if he was speaking about that then there's no guidance I can provide him. It's a paid service and doesn't really require a 'guide' as it's simple. He can check out their website, but regardless - if he wishes to try the dload method then there's there guide.
Shaolin36 said:
There will be guides around on our device forum. But basically requirements:
USB Stick (formatted exFAT)
USB OTG
You will need to download the service firmware, for this I used androidhost ru and firmware 9.1.0.300 C432.
You will have 3 zip files inside the firmware, you must create a folder on the USB stick called 'dload' and inside this folder you put the three zip files (named like update_sd_base.zip etc). Plug USB stick into device with OTG adapter and then open dialer and type *#*#2846579#*#* and choose software upgrade then memory card upgrade. Should restart and upgrade device to your new firmware (don't unplug USB during this process and make sure you have above 30% battery)
Click to expand...
Click to collapse
Thank you very much brother for the guide, I will try with your guide and I will see what happens, only 1 more thing, the firmware I only found on the essy-firmware page but it is paid, do you know where I can download it for free?
Prounder15 said:
Thank you very much brother for the guide, I will try with your guide and I will see what happens, only 1 more thing, the firmware I only found on the essy-firmware page but it is paid, do you know where I can download it for free?
Click to expand...
Click to collapse
Search on androidhost.ru
Shaolin36 said:
Search on androidhost.ru
Click to expand...
Click to collapse
My model is LYA-09 is there any problem if I install some firmware for the LYA-L29?
In My model i only found:
Huawei Mate 20 Pro LYA-L09 hw eu Laya-L09C 9.0.0.266(C432E10R1P16) Firmware 9.0.0 r3 EMUI9.0.0 05015LBD [androidhost.ru].zip
In LYA-L29:
Huawei Mate 20 Pro LYA-L29 hw eu Laya-L29C 9.1.0.310(C432E10R1P16).DLOAD.zip
Shaolin36 said:
Included RP section, so it successfully rebranded, and then I managed to move back to C432 using dload.
Click to expand...
Click to collapse
So just to clarify, you're saying that you can rebrand a Huawei devices Cust code from example a C432 to C185 without bootloader being unlocked?
Sent from my EVR-L29 using Tapatalk
I'm in the same predicament. Previous owner flashed the firmware from C792 (Canada) to C636 (Asia) via FunkyHuawei. And now I'm not getting any OTA updates and stuck on 9.0.0265. I would like to re-flash my fw back to c792 and I have the bootloader unlock code for my device, but I'm unable to find any guides to help me achieve this. Will the guide you provided work for me as well?
Limeybastard said:
So just to clarify, you're saying that you can rebrand a Huawei devices Cust code from example a C432 to C185 without bootloader being unlocked?
Sent from my EVR-L29 using Tapatalk
Click to expand...
Click to collapse
Deevusone said:
I'm in the same predicament. Previous owner flashed the firmware from C792 (Canada) to C636 (Asia) via FunkyHuawei. And now I'm not getting any OTA updates and stuck on 9.0.0265. I would like to re-flash my fw back to c792 and I have the bootloader unlock code for my device, but I'm unable to find any guides to help me achieve this. Will the guide you provided work for me as well?
Click to expand...
Click to collapse
Yes, it should work. I'd be happy to help you if you add me on Telegram. @Shaolin36