Hi,
My Le Max 2 stopped working the WIFI, did not find any network.
I already changed ROM (RessurectRem, Cuoco92, Stock) and nothing works ...
Are there any adapters I can use? Like those used in notebooks?
If I adapt those of notebook with the USB cable will it work?
Here is the video link with the problem (fingerprint also does not work):
youtube com/watch?v=6ikliMr9-FI
tks!
WIFI not working.
luizfernandonv said:
Hi,
My Le Max 2 stopped working the WIFI, did not find any network.
I already changed ROM (RessurectRem, Cuoco92, Stock) and nothing works ...
Are there any adapters I can use? Like those used in notebooks?
If I adapt those of notebook with the USB cable will it work?
Here is the video link with the problem (fingerprint also does not work):
youtube com/watch?v=6ikliMr9-FI
tks!
Click to expand...
Click to collapse
Got the same problem.
I have LINEAGE OS 14.1 last revision.
Fingerprint is working, but I cannot switch off the cellular (infinite loop) neither reboot on TWRP recovery.
Any idea?
Thanks.
MTG-SPA said:
Got the same problem.
I have LINEAGE OS 14.1 last revision.
Fingerprint is working, but I cannot switch off the cellular (infinite loop) neither reboot on TWRP recovery.
Any idea?
Thanks.
Click to expand...
Click to collapse
Do you also have the Wifi problem?
unfortunately I could not fix any of the problems.
=(
Try when you reboot your phone in a loop, hold the volume up button (only the volume up, not the power).
Works for me!
=)
WIFI not working. SOLVED!!
luizfernandonv said:
Do you also have the Wifi problem?
unfortunately I could not fix any of the problems.
=(
Try when you reboot your phone in a loop, hold the volume up button (only the volume up, not the power).
Works for me!
=)
Click to expand...
Click to collapse
I have solved it. WIFI is working again.
I have noticed that cellular was offering me conection to WIFI when I was far from home or work, i.e., far from known WIFI´s . Then, when back home again the same infine loop. So I went out and deleted all the known WIFI´s. And problem solved. All the WIFI´s detected and reconected again. Working fine!!.
Theo some problem
Mans, you can help me ?
I'm with the some problem.
Hue.
Related
I have this problem over a month and I couldn't reach the solution yet I did everything I know but still
the problem kinda weird one , is that when I turn the WiFi on its works excellent for seconds then all of a sudden I can't browse anymore and only by turning off and on I can browse again for few seconds
I did a Factory reset but no benefit. And I tried to change the rom to Full 4 files (Pit,PDA,Phone,CSC) official rom and Still the same thing
I found the similar issue on the internet without any solution
What could it be?! I'm Afraid Its Hardware problem but why!
Any suggestion
Thanks in advance.
odsso said:
I have this problem over a month and I couldn't reach the solution yet I did everything I know but still
the problem kinda weird one , is that when I turn the WiFi on its works excellent for seconds then all of a sudden I can't browse anymore and only by turning off and on I can browse again for few seconds
I did a Factory reset but no benefit. And I tried to change the rom to Full 4 files (Pit,PDA,Phone,CSC) official rom and Still the same thing
I found the similar issue on the internet without any solution
What could it be?! I'm Afraid Its Hardware problem but why!
Any suggestion
Thanks in advance.
Click to expand...
Click to collapse
As wifi is more or less kernel related, you should post your kernel version.
Maybe flashing another ROM or kernel can help to solve this wifi issue.
Have a look at Intratech's Official Firmware thread here => http://forum.xda-developers.com/showthread.php?t=1075278
Download and flash the latest ROM for your country/region/carrier or just the latest Frankenstein ROM (XWLA4, I am using it right now).
Just wipe cache after flashing the ROM via recovery mode (shut down the phone, then press Volume UP + Home + Power button until recovery menu appears).
Good luck !
Guys maybe you can help me, my phone is behaving very strange. It is a Tianhe H920+ with 4gb ROM, identical with Mlais MX58 Pro, Auxus Nuclea N1 and others.
Roms for Auxus Nuclea N1 are working perfectly, but, first of all i have problems with the rear camera, i am not getting any error messages, but just only the front camera is working and the switch camera option is missing, after i install some third party camera app it freezes.
Phone was suited with Tianhe ROM, build march 2014, for sure i made backup. What i have found out, when i flash the original BOOT.IMG, camera works fine, but the old kernel will be installed. I have unpacked it, checked also init, init.project files, they are totally the same, no change there, just the Zimage differs / Kernel.
All works fine but i have the old known wake up bug, i must remove the battery and start the phone again. I was searching everywhere, but i couldnt find any fix for it. I know flash firmware, but like i already mentioned rear camera is not working with other kernels, all other functions are ok. Is there any possible solution? Framework fix or something please?
Till now i have tried almost 10-15 roms, from MX58 Pro, Star, Tianhe, but non of them is suited with a kernel with working rear camera :crying:. Thank you very much.
Heyy delltech1.. I've also facing similar issue...have you found any solution to your problem?
Tianhe H920+ Wake up issue
delltech1 said:
All works fine but i have the old known wake up bug, i must remove the battery and start the phone again. I was searching everywhere, but i couldnt find any fix for it. I know flash firmware
Click to expand...
Click to collapse
Hello DellTech1.
I am facing the same issue with the pnone not waking up after it has gone to deep sleep.
I found out, that it only happens, when WLAN (WIFI) is switched on.
(For tests I had no SIM installed and the phone was reset to factory setup)
When WIFI is switched off it starts up as it should.
Could this issue be related to baseband?
Do you have more informations now?
Additional infos:
It showed, that the wakeup issue occured, when the phone was logged into a Network with WPA2 security.
Because I did not believe this, I did trials on 3 different networks with 3 different routers.
In each case, the phone did not wake up, if WLAN was active and the security settings in the router have been WAP2.
If I changed the settings in the routers to WPA, wake up was fine.
Anyway: an active WLAN connection (either WPA2 or WPA) does not allow the phone to go into Deep Sleep.
(according to CPU SPY at WPA, and my fingers touching the warm back of the phone with WPA2)
Tianhe
Eleichstetten said:
Hello DellTech1.
I am facing the same issue with the pnone not waking up after it has gone to deep sleep.
I found out, that it only happens, when WLAN (WIFI) is switched on.
(For tests I had no SIM installed and the phone was reset to factory setup)
When WIFI is switched off it starts up as it should.
Could this issue be related to baseband?
Do you have more informations now?
Additional infos:
It showed, that the wakeup issue occured, when the phone was logged into a Network with WPA2 security.
Because I did not believe this, I did trials on 3 different networks with 3 different routers.
In each case, the phone did not wake up, if WLAN was active and the security settings in the router have been WAP2.
If I changed the settings in the routers to WPA, wake up was fine.
Anyway: an active WLAN connection (either WPA2 or WPA) does not allow the phone to go into Deep Sleep.
(according to CPU SPY at WPA, and my fingers touching the warm back of the phone with WPA2)
Click to expand...
Click to collapse
Hi,
i have flashed the "new rom" from pandawillforum. But be carefull, after flashing i wasnt able to start the phone, it softbricked the phone, but i was able to unbrick it. Before you will flash it, take the PRELOADER file from a good known working rom and replace it. Then try to flash it, it will work now.
I have used the phone without the simcard, Wifi was enabled, Gmail synchronization also, i have used the phone for about 5 days, wakeup issue didnt reappeared. Camera is working also. Just search in the forum for H920 and you will find many topics, but i can also post the link here:
4GB version:
http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool
8GB version:
http://www.pandawillforum.com/soft/12J36_S131WT_H920+_8P64_20140329_JB2V1.2.V02.MP.EN.rar
Like i said, use a good working preloader, you can take it also from an older ROM, doesnt matter.
delltech1 said:
Before you will flash it, take the PRELOADER file from a good known working rom and replace it.
Click to expand...
Click to collapse
Could you recommend a good preloader?
Tianhe
Eleichstetten said:
Could you recommend a good preloader?
Click to expand...
Click to collapse
Yes you can use one from this ROM, i was using it everytime:
http://www.needrom.com/mobile/tianhe-star-h920-2/
Camera still not working
delltech1 said:
Yes you can use one from this ROM, i was using it everytime:
http://www.needrom.com/mobile/tianhe-star-h920-2/
Click to expand...
Click to collapse
I have tryed all roms from needrom and pandavile..nothing.
Now I tried the ROM that was offered in the Pandawill Forum for 8GB Version.
This ROM does include a working preloader (maybe has been changed?)
Anyway, when I flash this ROM, it works, but problems persist.
No change.
CWM 8gb ver. ROM
HI guys, Please could some one upload the 8GB rom flashable with CWM recovery I can not do it with flashtools my usb conenctor is damaged...
PLEASE HELP and save my ass I am starting to be despaired with this phone
THANK YOU for any support and have a nice day
Modified version of Note 3 yasuu ROM.
Just for the case that someone do not know how to replace boot.img (kernel 2014) and replace camera drivers I am uploading modified version of Note 3 yasuu ROM.
No flickering screen,No back camera bug or green camera,No unlock freez yet.
Only bad thing is battery usage, maybe because my USB connector is damaged.I do not know try it out and share your results about the baterry please.
LINK (CWM zip file) :
mediafire.com/download/v3n65fltmwka52z/ROM_NOTE3_Kernel_2014_H920+.+Cam.Drivers.HanyxX.zip
Gave it a try.
Installation did work, but I missed keyboard.
Did install keyboard from APK.
Then tried to root. Framaroot said "ok", but Superuser did not work.
Tried to install Superuser by CWM method, but that ended in a startup-loop.
Had to Flash back Stock-ROM to recover.
Maybe try tomorrow again.
OK, Gave it a second try. This time without trying to root.
Well, the wake up issue does not exist anymore.
Unfortunately, it´s just because the phone does not start to Deep Sleep anymore.
It reduces processor rate, but does not start Deep Sleep.
That´s the cause for higher battery consumption.
By the way:
- The package of my phone is not labeled "Tianhe", but "CGC".
- Both cameras did work with this Rom.
- My phone has 8GB of memory and stock ROM is 03/2014
Hello
Eleichstetten said:
Gave it a try.
Installation did work, but I missed keyboard.
Did install keyboard from APK.
Then tried to root. Framaroot said "ok", but Superuser did not work.
Tried to install Superuser by CWM method, but that ended in a startup-loop.
Had to Flash back Stock-ROM to recover.
Maybe try tomorrow again.
Click to expand...
Click to collapse
I have tried your rom but camera still not working for me...i have 8GB version.
---------- Post added at 01:03 PM ---------- Previous post was at 12:59 PM ----------
Hello,
I have tried the last modified version of this rom but the camera is not working for me..not frontal one,not the back one..i have tried all roms from needrom(tianhe,mlais or star...)..no one is proper to have working camera...any advice
I did reset my phone with this firmware from Pandawill Forum (8GB version). The firmware is for H920+ that are produced after March 2014.
It seems, that there has been a change of camera hardware.
http://www.pandawillforum.com/showthread.php?25569-ROM-ROM-for-Tianhe-H920&p=136188&viewfull=1#post136188
This seems to be real stock.
If your phone is produced after March, 2014 and this firmware does not solve the problem, there is a high probability that it is defective.
How to find out?
How can i find out what is the date manufacture of my phone?
about Tianhe H920+ turbo /pandawill/, rear camera problems
validoican said:
I have tried your rom but camera still not working for me...i have 8GB version.
---------- Post added at 01:03 PM ---------- Previous post was at 12:59 PM ----------
Hello,
I have tried the last modified version of this rom but the camera is not working for me..not frontal one,not the back one..i have tried all roms from needrom(tianhe,mlais or star...)..no one is proper to have working camera...any advice
Click to expand...
Click to collapse
Hello,
After trying all firmwares from panda and needrom i find that there is a hardware problem. BAD CONNECTION between board and camera conector!
Try to open the phone and press firmly camera connector to the board. Then put above something thick 1 mm (non metal) to hold the connector in same position.
It's worked fine for me. Good luck to you!:good:
delltech1 said:
Hi,
i have flashed the "new rom" from pandawillforum. But be carefull, after flashing i wasnt able to start the phone, it softbricked the phone, but i was able to unbrick it. Before you will flash it, take the PRELOADER file from a good known working rom and replace it. Then try to flash it, it will work now.
I have used the phone without the simcard, Wifi was enabled, Gmail synchronization also, i have used the phone for about 5 days, wakeup issue didnt reappeared. Camera is working also. Just search in the forum for H920 and you will find many topics, but i can also post the link here:
4GB version:
http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool
8GB version:
http://www.pandawillforum.com/soft/12J36_S131WT_H920+_8P64_20140329_JB2V1.2.V02.MP.EN.rar
Like i said, use a good working preloader, you can take it also from an older ROM, doesnt matter.
Click to expand...
Click to collapse
How do you unbrick your phone... ??? Please advise !!!
Hi guys, first post here, so sorry if this is in the wrong section or something.
I just updated my phone (Honor 5X KIW-L21) from Lollipop to Marshmallow, and as soon as it updated, the Wi-Fi stopped working.
I can connect to my router, but can't connect to the internet. Mobile data works absolutely fine.
I have tried rebooting, forgetting and reconnecting to the router, network settings reset, factory default reset but no luck.
Is anyone able to help me here please?
ciaran1344 said:
Hi guys, first post here, so sorry if this is in the wrong section or something.
I just updated my phone (Honor 5X KIW-L21) from Lollipop to Marshmallow, and as soon as it updated, the Wi-Fi stopped working.
I can connect to my router, but can't connect to the internet. Mobile data works absolutely fine.
I have tried rebooting, forgetting and reconnecting to the router, network settings reset, factory default reset but no luck.
Is anyone able to help me here please?
Click to expand...
Click to collapse
Try reflashing the update again
Yes, try to flash the whole stock firmware package again, steps to do it are mentioned below, please follow them:
Download your phone's latest firmware.
After doing this put the UPDATE.APP in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Check your wifi after doing this and report back.
ciaran1344 said:
Hi guys, first post here, so sorry if this is in the wrong section or something.
I just updated my phone (Honor 5X KIW-L21) from Lollipop to Marshmallow, and as soon as it updated, the Wi-Fi stopped working.
I can connect to my router, but can't connect to the internet. Mobile data works absolutely fine.
I have tried rebooting, forgetting and reconnecting to the router, network settings reset, factory default reset but no luck.
Is anyone able to help me here please?
Click to expand...
Click to collapse
1- factory reset usually does the trick to solve problems
2- reflashing could help or it might just duplicate the same mistake
3- if there is no other feedback with the same malfunction, consider your problem to be isolated.
4- factory reset and do not setup anything, just skip the whole wizard. Let is settle for 5 minutes and then reboot. See if you can get wifi data.
5- consider using sensors multi tool app to check wifi or Huawei hidden test menu as every device have one.
Hello everyone,
at first - best ROM I ever tried!
Just one big problem for me:
When the screen is off (sleep mode), I CAN NOT unlock the phone with fingerprint - during first 5 seconds - when display is off, it works. I have to turn on display with power button and AFTER that I CAN unlock with fingerprint with no problems. I want to unlock my phone with fingerprint when the display is off even more than 5 seconds.
Is there a solution?
In stock ROM (16s International) everything works perfect, there were no time limitation. Fingerprint worked everytime even when screen was off for 10 minutes for example.
Where is the problem? It is no hardware problem for sure.
Someone said to use the same finger 3 times instead of 3 different fingers. Try it. It may solve your problem.
I am using the same ROM without the problem which you experienced although sometimes it took more than a second or required a couple of taps on the sensor to unlock the screen.
Go to settings, battery, power saving managements and see if the Ultra Long Standby During Sleep is turned ON. I have that disabled.
Edit. Sorry, I thought that you had the manufacturers' ROM. I had the factory ROM.
I have the same 3 fingerprints for better recognition for sure, but this tip did not help me.
Also I tried to turn off the Long sleep too, did not help to solve this.
Any other ideas @madsurfer1? With screen ON works flawlessly.
Hi guys
I'm experiencing exactly the same issue with my fresh received x829. Haven't tried much on stock ROM but apparently everything was working. Then I flashed AOKP and lignage os v13, and with both the fingerprint only works in the 5 seconds after screen off. And when I mean works, I mean detect a finger, if it's the good one unlocks and if not shows an error. After 5 seconds, the phone shows nothing at all, no unlock and no error.
Have you had any success since these posts ?
Regards
AOKP on my x829 has fingerprint "working" from sleep. It sometimes takes a while or multiple attempts though.
Thanks bwalter
@Razor99 any news on your side ? Looks like only you have the exact same issue I encounter.
same problem
bolof2 said:
Thanks bwalter
@Razor99 any news on your side ? Looks like only you have the exact same issue I encounter.
Click to expand...
Click to collapse
hi
i have the same problem with most of the roms,
is there any solution?
My solution was full wipe, including internal storage. After than clean install ROM. With these steps fingerprint begin works even in deep sleep mode.
Keep in mind that Max 2 has very bad fingerprint at all on every model compared to premium brands. It is slow and sometimes react after few attemps. But works.
If theese steps wont help you - proove claim to the seller of your mobile.
If fingerprint is your priority, I strongly recommend another model, except Le Max 2. Maybe Le Pro is now better with fingerprint.
Try it and let us know.
https://forum.xda-developers.com/showthread.php?t=3408395
Flash latest CN 23S modem, fp problem bye bye!
hackerpower said:
Flash latest CN 23S modem, fp problem bye bye!
Click to expand...
Click to collapse
Indeed hackerpower, I saw your post on the other topic https://forum.xda-developers.com/le-max-2/how-to/le-max-2-finger-print-t3408395/page16#post71613937 and for me, that did the trick, without flashing another rom or wiping anything.
Thanks a lot!
bolof2 said:
Indeed hackerpower, I saw your post on the other topic https://forum.xda-developers.com/le-max-2/how-to/le-max-2-finger-print-t3408395/page16#post71613937 and for me, that did the trick, without flashing another rom or wiping anything.
Thanks a lot!
Click to expand...
Click to collapse
glad I could help!
how do we flash modem only? i want to try the 23s china modem
updiliman said:
how do we flash modem only? i want to try the 23s china modem
Click to expand...
Click to collapse
Download under China folder (23S v0033 I think), link for download in this post: https://forum.xda-developers.com/showpost.php?p=71613937&postcount=151
Flash the modem zip file by Twrp recovery.
Moon75 said:
Download under China folder (23S v0033 I think), link for download in this post: https://forum.xda-developers.com/showpost.php?p=71613937&postcount=151
Flash the modem zip file by Twrp recovery.
Click to expand...
Click to collapse
Flashed the 023S modem and BAM! it works!!! Thanks a lot!
For me, I found flashing the dev 66 modem fixed this wake problem.
Hello,
I don't tether a lot, but I've just noticed that I don't have internet access on my phone when I do, via wifi or USB.
Any idea? Already did a reset of my network parameters and APN.
BLA29 8.0.0.128(C33)
Hildr said:
Hello,
I don't tether a lot, but I've just noticed that I don't have internet access on my phone when I do, via wifi or USB.
Any idea? Already did a reset of my network parameters and APN.
BLA29 8.0.0.128(C33)
Click to expand...
Click to collapse
Hey, have you found any solution??
I get the same problem with my Mate 10 (previously it worked fine).
No idea what could be the reason.
Any help or advice is appreciated!!!
It is wierd that the hotspot itself works perfectly (i can work from my laptop), but any app on the phone stops working (no whatsapp etc)
lisbon2004 said:
Hey, have you found any solution??
I get the same problem with my Mate 10 (previously it worked fine).
No idea what could be the reason.
Any help or advice is appreciated!!!
It is wierd that the hotspot itself works perfectly (i can work from my laptop), but any app on the phone stops working (no whatsapp etc)
Click to expand...
Click to collapse
I think it was due to the firmware I was using at the moment. It worked after changing it to the latest firmware. I also went from C33 to C432. Now on Pie.
Hildr said:
I think it was due to the firmware I was using at the moment. It worked after changing it to the latest firmware. I also went from C33 to C432. Now on Pie.
Click to expand...
Click to collapse
I'm on the latest FW, and it's not working...