I recently flash custom ROM i.e LineageOS otus 14.xx while everything seemed worked well but I could not use mobile data, i tried to fix by setting apn but it says
APN setting is not availabe for this user. mobile data working well in other mobile but MOTO E got serious problem
Related
Hello, I have a huge problem with the ZTE v987 which I've bought from a Chinese purveyor.
I have installed on it:
V987 Android 4.2.1 V2.0MOD by BM, after that the 3rd and 4th version also. Now I have ROM BM 4. Noone solved my problem.
The phone is manufactured August 2013. It works good with 3G also, modem works in mode H or H+. I have tried 3 networks in my country and it works, anyway there is a network in my country which has voice/messages disabled and has roaming for data, the network is only for data service, no voice/message, this network works on my huawei and it works also on another v987 (probably version with another "baseband", I guess)
My V987 cannot connect to the network.
I have made a log from logcat
logcat -b radio -v threadtime *:V
There is that log:
paste.ubuntu.com/6819394/
The radio had been disabled, I had enabled it, the v987 tried to connect and failed
The network is called "FullName is Aero2", numeric "mccmnc = 26017, pnn = Aero2'
For comparison
There is a log from connecting to the network
[GsmSST0] long: Plus short: Plus numeric: 26001
full success, and the phone can works on 3g h+ mode, above 9mbit/s works
paste.ubuntu.com/6819381/
Ask any question if you want.
PS I know that this is advanced problem but I cannot post on proper part of this forum for developers.
for some reason whenever i try and flash a 6.0 rom my mobile data wont work. on 5.1.1 it works fine but 6.0 an rom i try the data wont turn on and when i go int other cellular network settings and chose an network it disconnects and then i have no signal at all. does anyone know what i should do ? i clean flashed the rom too before installing.
iixAndroidx said:
for some reason whenever i try and flash a 6.0 rom my mobile data wont work. on 5.1.1 it works fine but 6.0 an rom i try the data wont turn on and when i go int other cellular network settings and chose an network it disconnects and then i have no signal at all. does anyone know what i should do ? i clean flashed the rom too before installing.
Click to expand...
Click to collapse
Check that the APN Settings are correct for your carrier. I have T-Mobile and when flashing CM 13 I have to change the APN protocol from IPv6 to IPv4/IPv6.
Hey Team
I am facing a peculiar issue with my Moto e 1st gen (dual sim) off late. Recently all of a sudden my phone stopped reading the Sim, I found out that the IMEI and baseband were showing "unknown" so I did some reading online and tried to flash it to stock ROM which surprisingly worked and both my WiFi and IMEI were restored. However since then the phone fails to receive network signal , it keeps on going to 0 bars. Tried to replace the SIM and flashed it multiple timed with the stock ROM but still no go. Finally decided to unlock the bootlooder install TWRP and done a clean install of CM13 NIGHTLY, surprisingly the network signal reception improved for about 30 minutes after reboot but soon after again went blank. Post this tried to flash CM13 multiple times but no luck it just stays for a while after initial reboot but vanishes thereafter. Also tried to set the aggressive handover from WiFi ... Option under developer option but still no avail.
Really appreciate any help on this issue !!!
Sandeep
Try flashing radios again
Sent from my Moto E using Tapatalk
After updating the last update on 20th April,2016 I am not able to use my moto e as it is partially bricked.
After updating the sim seems to be working partially ie. In the notification bar it shows no tower of any sim and in the setting it shows that idea/Airtel, etc (all sim name showing which sim u have entered) but no towers ,no internet
It had become just a MOTO E tablet:crying: with no sim working
Else everything working fine
For your kind information I had flashed the firmware too, but when I flashed gpt partition it gives me error at that command
Please help me ,,,,
surajdpatel said:
After updating the last update on 20th April,2016 I am not able to use my moto e as it is partially bricked.
After updating the sim seems to be working partially ie. In the notification bar it shows no tower of any sim and in the setting it shows that idea/Airtel, etc (all sim name showing which sim u have entered) but no towers ,no internet
It had become just a MOTO E tablet:crying: with no sim working
Else everything working fine
For your kind information I had flashed the firmware too, but when I flashed gpt partition it gives me error at that command
Please help me ,,,,
Click to expand...
Click to collapse
Can you try flashing latest CM-13.0 and see if sim works or not?
Sent from my Redmi Note 3 using Tapatalk
i had bought an unlocked LG V60 from ebay and it was able to connect to mobile data using my Lyca mobile sim . but since the last update the phone is not able to connect to mobile data as the apn is coming greyed out . I tried updating it with few apn apps from the app store and didn't have any luck with it. Its a t-mobile version and the unlock checker app says the mobile is unlocked . Is there any way to revert back to the older version or add apn to use mobile data . I have already done a hard reset and the issue still persists . I am currently in uk and any help will be really appreciated .