Can someone tell me how to unbrick this model, because im looking many source but nothing happen
My condition right now :
1. Cannot go to Recovery Mode
2. Bootloop
3. Android Bootloader detected on PC
4. Can't go to storage data
I was looking stock rom with data and use SP Flash tool but no one have it. I keep downloading the same flash stock rom (its UPDATE.APP)
Hope someone can help me :crying:
Related
Hi. Everyone.
If someone has tried to flash a custom rom without backing up his stock rom, and messed up mid way by not installing custom rom. No need to worry Follow these steps
Go to
needrom.com/phone-roms/qmobile
download QMobile Z4 stock rom (You need Winrar 5 to unzip it). Unzip at your PC where u can easily access it.
Then You need MTK 6589t drivers (Download, Unzip n install) attached here
and finally u need SP Flash tool (Attached Here)
Just extract SP Flash Tool from Zip file and open it from Blue icon
Click "Scatter Loading" Scatter file is placed in the folder where you extracted the Stock Rom. (Dont attach your phone to pc uptill now)
Click "Download" on SP Flash Tool software and attache your Z4 with PC by micro USB cable. Phone will be detected and Stock ROM will be flashed in few minutes. A greenish Blue circle confirms Flashing successful. Close SP Flash Tool. Detach your Phone and Re boot.
My Qmobile z4 is full dead just read light show on charging time.
How is flash plz help me
[email protected]
Plz help me all
Mobile z4 flash
Aami786 said:
Hi. Everyone.
If someone has tried to flash a custom rom without backing up his stock rom, and messed up mid way by not installing custom rom. No need to worry Follow these steps
Go to
needrom.com/phone-roms/qmobile
download QMobile Z4 stock rom (You need Winrar 5 to unzip it). Unzip at your PC where u can easily access it.
Then You need MTK 6589t drivers (Download, Unzip n install) attached here
and finally u need SP Flash tool (Attached Here)
Just extract SP Flash Tool from Zip file and open it from Blue icon
Click "Scatter Loading" Scatter file is placed in the folder where you extracted the Stock Rom. (Dont attach your phone to pc uptill now)
Click "Download" on SP Flash Tool software and attache your Z4 with PC by micro USB cable. Phone will be detected and Stock ROM will be flashed in few minutes. A greenish Blue circle confirms Flashing successful. Close SP Flash Tool. Detach your Phone and Re boot.
Click to expand...
Click to collapse
I will tell you the method that worked for me
Firs of al I highly recommend you to use the v.3 version of sp flash tool,it worked for me then download q mobile stock ROM from www.needrom.com select q mobile and go to page 2 and there u will see q mobile stock ROM select it and download it, once u have downloaded just extract to desktop and then open sp flash tool and then I formated whole drive with sp flash tool and then try format all and download option if that doesn't work try firmware update option, if even that dosent work try download option and hit download then attach your phone with USB cable to your computer and it will be detected as v com driver and then the download will start, once the download will finish there will appear a green tick mark just close it and power on your q mobile z4 if u see the q mobile logo then just press volume down + volume up + power button and you will go to factory mod then clear data and your q mobile will start and will work 100% ...
I don't know if this method will work for you I don't know what you've done with it, this method just worked for me and know my z4 is working like a charm
qmobile z4
Hello friends, my qmobile z4 is completely dead only charging light is on. i have tried everything. i have downloaded flash tools and firmware but it flash tools only download the flash and after that nothing happened. but when i try to firmware upgrade then i need to check uboot, cashe and userdata. but these are not included in this firmware. can you please tell me what to do with this.
my email is [email protected]
sheridani said:
Hello friends, my qmobile z4 is completely dead only charging light is on. i have tried everything. i have downloaded flash tools and firmware but it flash tools only download the flash and after that nothing happened. but when i try to firmware upgrade then i need to check uboot, cashe and userdata. but these are not included in this firmware. can you please tell me what to do with this.
my email is [email protected]
Click to expand...
Click to collapse
Dear friend "Aami786" thank you for sharing sure nice information.
Unfortunately I am having the same problem as "sheridani"
My phone is also completely dead only charging light is on.
But the phone is being detected on the SPFlashTool, is there any other file that needs to be updated on the phone.
awaiting reply...
Thanks in advance!
Dears,
plz help if somebody can...!
i tried to flash cwm recovery .image file with flashify without knowing of boot-loader unlocking initially, didn't backup also. and after restart its in bootloop until now.
tiried to flash the stock rom with sp flash tool and even with the box too but no success as i'm unable to start flashing because it restarts.
the thing is it doesn't go into recovery mode. from fast-mode, computer or magic box it disconnects automatically due to its bootloop/restarting.
any professionals pls help, i'll be thankful greatly....
dskpoison said:
Dears,
plz help if somebody can...!
i tried to flash cwm recovery .image file with flashify without knowing of boot-loader unlocking initially, didn't backup also. and after restart its in bootloop until now.
tiried to flash the stock rom with sp flash tool and even with the box too but no success as i'm unable to start flashing because it restarts.
the thing is it doesn't go into recovery mode. from fast-mode, computer or magic box it disconnects automatically due to its bootloop/restarting.
any professionals pls help, i'll be thankful greatly....
Click to expand...
Click to collapse
you try soft Erase Tool , link ;https://drive.google.com/file/d/0B3CCjqbTuz5RUTY2ckJKWWp5LTg/view
Hi i bought a umi z not long ago and today i wanted to install twrp thanks to this link
Then i wanted to root it thanks to super su.
So I install SPFlash tool on my computer and downloaded the recovery twrp on my phone. It worked great until I wanted to reboot into android. And than !!!! problem. I'm in bootloop. Nothing to do. The people who did it also said they were all satisfied. I need help pleease. After several unsuccessful tries I find myself without Custom Recovery and without system.
HELP ME:crying::crying::crying::crying:
You can flash stock ROM again with SP flashtool.
Shut down phone. DL stock Rom. Extract this and flash whit SP tool. Works. Great.
First switch off your phone, staying the power button more than 10 seconds (release as soon as the bootanimation deseappears).
Then on your PC launch SP flash tool and use the scatter file of the last version ( https://forum.xda-developers.com/umi-z/development/compilation-original-roms-t3549971 ), start download, connect phone to PC and all is ok ! But factory reset...
hello everyone here I bring the rom zte z820 to metropc and t-mobile files are recognized by the spflash tool but I only work with the Multiport_download_Z820_V1.0 (Service) (with the computer without battery and pressing the volume button less until the end the installation without further I pass the link to a drive folder with 3 files on
Multiport_download_Z820_V1.0 (Service) .zip
322150B3090Z820V1.0.0B30.zip (rom for t-mobile)
316100B1178MPCS_Z820V1.0.0B11.zip (rom for metropc)
I hope that with this contribution you can create new rom mod that improves the z820 ...
link: https://drive.google.com/drive/folders/1Pk-Duhdt0svif8YYLY8NYk6tOG-bRL2k
please download and upload it to another server so that the contribution is not lost ...
Thanks a lot, your post help me so much, I repair my Z820 with the files but with the up volumen button. Thanks man.
Thanks you!! i fixed boot loop in logo screen MPCS
Could someone help me use this? It doesnt like the scatter file Nevermind, I just had to extract the entire folder. So I run the service program, load the scatter file, select scan and then plug my phone in with no battery and press volume up. It does it's thing and now what?
I wish people would be clear about things when it concerns processes that could brick your device...anybody reading this i followed this video to get a basic idea of what to do:
youtube.com/watch?v=yslH3ito2lQ
Thank you for the files, Diego
Thanks a lot
was able to flash the stock rom from metropcs with the sp flash tool even though it would not work without the agent.bin found in this folder:
ZTE_Obsidian_Z820_MT6735M_MetroPCS_V1.0_(by_ztefirmware.com)
with sp flash tool version 5.1720
anyways are all the other people having problems loading the bootloader to get to fastboot mode?
i cant access fastboot mode it says waiting for device. adb recognizes the phone and so does fastboot even though once i reboot to bootloader from adb and from manual option in recovery all it does it restart the phone never gets to fastboot mode on both ways. i want to unlock the bootloader so i can flash twrp and set a custom firmware.
anybody with help please post a reply and a link that will support this model. i tried the tool all in one and adb same problem for fastboot
Hi everyone
A friend gave me a demo unit of a huawei Y6 2019 (MRD-LX1) and I wanted to flash it with a stock rom (not a demo rom)
I double check when i took the stock rom file(https://www.getdroidtips.com/stock-rom-huawei-y6-2019/) and I flashed with SP flash tools
Since then this huawei Y6 only boots on a black screen and get a bootloop
Any idea to unbrick it ?
I tried : recovery mode
USB recovery mode with the dload folder in a USB stick) It seems that the rom is not recognised
The only mode that I can use is the Fastboot recovery but I can't do much in this mode since the bootloader is locked
Thank you.