WAS-LX???????? version in the Netherlands P10 Lite - Android Q&A, Help & Troubleshooting

Hello,
I bricked my P10 lite and I hope that it will work if I try the original rom that is used for the Netherlands because I tried a lot original roms but none of them works. TWRP gives a lot of error codes like code 9. Extracted update.app install via Fastboot works but the phone freezes after the bulby bootlogo. Phoneversion is called NDR90M testkeys and bootloader is unlocked so please give me the dutch versioncode WAS-LX????????
Thank you

paultjuh1980 said:
Hello, I bricked my P10 lite and I hope that it will work if I try the original rom that is used for the Netherlands because I tried a lot original roms but none of them works. TWRP gives a lot of error codes like code 9. Extracted update.app install via Fastboot works but the phone freezes after the bulby bootlogo. Phoneversion is called NDR90M testkeys and bootloader is unlocked so please give me the dutch versioncode WAS-LX???????? Thank you
Click to expand...
Click to collapse
I don't have this device but, the following threads may be helpful for what you are looking for and don't be afraid to ask for some member guidance within one of them.
https://forum.xda-developers.com/showthread.php?t=3688097
https://forum.xda-developers.com/showthread.php?t=3736754
https://forum.xda-developers.com/showthread.php?t=3710586
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE

Related

[Q] Huawei honor u8860 - b930 downgrade

Please help!
I accidentally installed the b930 firmware on my Huawei Honor, without knowing that the bootloader was locked.
I wish to install the Miui rom on my phone, and according to what i've read me to, the b919 firmware would be the wisest choice, since is it possible to change the recovery file.
But the problem is that every time i try downgrading from b930 to b919 it allways gives me an error! I've been searching for so long for an answer to my problem, but nothing i've found have been helpful.
Please help me downgrade to b919!
Best regards
tgraneberg said:
Please help!
I accidentally installed the b930 firmware on my Huawei Honor, without knowing that the bootloader was locked.
I wish to install the Miui rom on my phone, and according to what i've read me to, the b919 firmware would be the wisest choice, since is it possible to change the recovery file.
But the problem is that every time i try downgrading from b930 to b919 it allways gives me an error! I've been searching for so long for an answer to my problem, but nothing i've found have been helpful.
Please help me downgrade to b919!
Best regards
Click to expand...
Click to collapse
I think if you use this downgrade patch, that you'll be able to downgrade
http://forum.xda-developers.com/showthread.php?p=33000395&highlight=b930+downgrade#post33000395
hope it helps!
tgraneberg said:
Please help!
I accidentally installed the b930 firmware on my Huawei Honor, without knowing that the bootloader was locked.
I wish to install the Miui rom on my phone, and according to what i've read me to, the b919 firmware would be the wisest choice, since is it possible to change the recovery file.
But the problem is that every time i try downgrading from b930 to b919 it allways gives me an error! I've been searching for so long for an answer to my problem, but nothing i've found have been helpful.
Please help me downgrade to b919!
Best regards
Click to expand...
Click to collapse
if downgrade patch doesn't work.. try installing full b919 from dload folder

Doogee Y6 Piano Black not switching on after firmware reload

hi. i reloaded my y6 firmware with stock firmware via fladh tool but now it is dead. wont switch on at all. usb still pics up but no display. all i can do with flashtools is to format the phone but still nothing. cant even load twrp. please assist.
charled said:
hi. i reloaded my y6 firmware with stock firmware via fladh tool but now it is dead. wont switch on at all. usb still pics up but no display. all i can do with flashtools is to format the phone but still nothing. cant even load twrp. please assist.
Click to expand...
Click to collapse
I don't have this device but, the following threads may be helpful for you. Don't be afraid to ask for some member guidance on them either.
https://forum.xda-developers.com/showthread.php?t=3480459
https://forum.xda-developers.com/showthread.php?t=3509692
https://forum.xda-developers.com/showthread.php?t=3487594
Just an FYI on a few leads to help you get some guidance from a member with the same/similar device.
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Fixed
charled said:
hi. i reloaded my y6 firmware with stock firmware via fladh tool but now it is dead. wont switch on at all. usb still pics up but no display. all i can do with flashtools is to format the phone but still nothing. cant even load twrp. please assist.
Click to expand...
Click to collapse
Managed to load the custom rom. found that on windows 10 it failed to load with splashtools. tried on my win7 machine and it worked. phone up and running.
do any of you know if there's a stock rom with android 7 for the doogee y6 piano black. would like to try it out.:good:
charled said:
do any of you know if there's a stock rom with android 7 for the doogee y6 piano black. would like to try it out.:good:
Click to expand...
Click to collapse
As I had stated, I don't have this device but, your best bet is to ask this question within one of the following threads for some member guidance.
https://forum.xda-developers.com/showthread.php?t=3480459
https://forum.xda-developers.com/showthread.php?t=3487594
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE

A8 plus (2018) Live Demo Unit problem...

Hi
Need help...
I have an A8 plus 2018 Live Demo Unit
(A730X)
In an attempt to permanently remove the retail mode, I did not back up before .... I tried to install another firmware of a normal device (A730F) but without success, the device is only in the Samsung logo ...
I already tried using combination firmware and it also did not work ....
I can enter download mode
TWRP is currently installed
The notebook that I use at the moment does not allow the installation of Samsung kies nor the Smart Switch, but drives well installed ....
I have another Live Demo Unit to copy the rom, if possible ...
Or if there is another method that can save the device .... I am looking for the A8 firmware plus demo but it seems it does not exist ...
Who can help at least in the configuration of a rom or any help already thank ...
Sorry for bad english translator
Thokkynn said:
Hi, Need help... I have an A8 plus 2018 Live Demo Unit (A730X)...
Click to expand...
Click to collapse
I don't have this device but, the following threads may be helpful for what you need and don't be afraid to ask for some member guidance within one of them too.
https://forum.xda-developers.com/showthread.php?t=3760991
https://forum.xda-developers.com/showthread.php?t=3726970
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.

Need Huawei Y5 2017 MYA-L02 Stock Rom for SP Flash Tool

Good day, developers!
This is a request thread for Android, particularly on a recent HUAWEI device.
I have a hard-bricked Huawei Y5 2017 MYA-L02 device, and I found a way to restore this device from bricked state: I could flash ROMs via SP Flash Tool. So, the firmware that I'll be needing is for my device's model. Unfortunately, however, the only firmware available online at present was for MYA-L22 model which I found here (https://forum.xda-developers.com/hu...-stock-rom-t3757134/post76637498#post76637498). I tried flashing that firmware in SP Flash Tool several times, but I always get this error message, "ERROR: S_PL_VALIDATION_FAIL (3182)" which tells me that I am flashing the wrong ROM.
With this, I am requesting a compatible stock rom to those who have working Huawei Y5 2017 MYA-L02 devices.
Exconvinced said:
Good day, developers! This is a request thread for Android, particularly on a recent HUAWEI device...
Click to expand...
Click to collapse
I don't have this device but, the following thread is probably your best bet in locating the Firmware for your device.
https://forum.xda-developers.com/showthread.php?t=3469146
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
The stock rom for Huawei Y5 2017 MYA-L02 model is now available online. Check out needrom.com. Credits to uploader victoriordachi

Huawei Y6 2018 ATU-L22 Stock Firmware

Hi. Can someone please provide me the stock firmware of Huawei Y6 2018 ATU-L22? I've been searching it for hours with no luck so I kinda hoping that someone could help me.
rhadz19 said:
Hi. Can someone please provide me the stock firmware of Huawei Y6 2018 ATU-L22? I've been searching it for hours with no luck so I kinda hoping that someone could help me.
Click to expand...
Click to collapse
I know this aint what your asking for BUT if you have a custom recovery you could backup what it is to an sdcard for of what it is needing from the firmware maybe. or if its to fix your phone, i know that if your systems gone bad, This device ( atu-l22 ) which of what i has is able to download the firmware for you even if your phone doesnt have a system installed on it..
****BELOW COMMENT
NOT RELATED TO YOUR POST****
I know i shouldnt be posting this question on your forum but maybe you or anyone that visits this post may know how to install ( custom rom/ custom firmware ) to our specific device? ( Atu-L22 ) ive been trying for a very long time, i have Unlocked bootloader & Magisk rooted device. Much experience with doing stuff to phone systems BUT then it comes to huawei which is muc different for ME to what samsung and other androids are? i just need help installing custom roms, im currently about to delete my system from my phone which ive backed up, and am about to have it reinstalled from that Erecovery thingy which our device offers, then imma fix/ unlock the vendor type thingy thru HCU Client and see if that helps?

Categories

Resources