I cant put my phone on download mode, my PC recognizes it has Qualcomm HS-USB QDLoader 9008, because i installed the driver, otherwise i would get USB QHSUSB_DLOAD has a none driver installed.
I've tried so many guides refering to LG G2 tutorials, also other outside-xda guides, but none of them worked, because i cannot put the phone has a "download mode".
Tried many different combinations with the buttoms, but none of em worked. Just if i kept pressing the volume + button, the capacitive buttoms on the touch will light but nothing else, nothing changes on my device manager.
Can you guys recommend me what to do with the phone?.
Thank you so much!, Sorry if this post doesnt belong in this tree.
solution
mike_san said:
I cant put my phone on download mode, my PC recognizes it has Qualcomm HS-USB QDLoader 9008, because i installed the driver, otherwise i would get USB QHSUSB_DLOAD has a none driver installed.
I've tried so many guides refering to LG G2 tutorials, also other outside-xda guides, but none of them worked, because i cannot put the phone has a "download mode".
Tried many different combinations with the buttoms, but none of em worked. Just if i kept pressing the volume + button, the capacitive buttoms on the touch will light but nothing else, nothing changes on my device manager.
Can you guys recommend me what to do with the phone?.
Thank you so much!, Sorry if this post doesnt belong in this tree.
Click to expand...
Click to collapse
Turn the cellphone off
While pushing Vol - Connect it to the pc
Dowanload mode is on
I helped you, so you helpe me man I cant find the files to flash and unbrick my F7! this is my email: [email protected]
So a friend came to me with this phone in hopes of me fixing it for him. The phone doesn't turn on and I've concluded that most of his NAND partitions are corrupted as I can't enter fastboot or recovery. When I connect it to my PC it recognizes a Qualcomm HS-USB QDLoader 9008 (COM5) port in device manager. I first tried this method but the only thing what happens is that the phone turns on (screen light goes on but stays black), vibrates and shuts down again (I've tried putting it in fastboot or recovery mode with volume up/down + home button + power button while it does this but with no success).
Next thing I tried was this method (followed it step by step) and it turned out that I am stuck in the OLD “Qualcomm HS-USB QDLoader 9008” mode. After I follow the guide up to the point that I have to press 'Download' in QFIL, the program gives me the following message:
Code:
Download Fail:Unable to download Flash Programmer using Sahara Protocol
Download Fail:Sahara FailSahara Fail
I've included a log.
What else can I try to unbrick this phone?
I would really like to make my friend happy lol.
P.S. If anyone has a good link to the stock firmware of this phone (NLT/Netherlands region), please send me in a private message because I searched almost everywhere and all I found were fake or expired links.
Hello,
I super hard bricked the Phone from my Brother and he need it for work. I flashed the wrong Stock-Rom.
No when I connect the Phone to the Computer it appears as Qualcomm HS-USB QDLoader 9008.
Is there anywhere an Option to repair it?
Thank you for your attention.
RingeHD said:
Hello,
I super hard bricked the Phone from my Brother and he need it for work. I flashed the wrong Stock-Rom.
No when I connect the Phone to the Computer it appears as Qualcomm HS-USB QDLoader 9008.
Is there anywhere an Option to repair it?
Thank you for your attention.
Click to expand...
Click to collapse
Not sure with LG maybe lgup or 1 of their tools, I saved xiaomi device as long as pc recognises it should be a way, update Qualcomm HS-USB QDLoader from device manager and restart pc disabling driver signature varification. I had to put the phone in download mode.Thats best I can do someone with more knowledge will better explain. When PC doesn't find the phone that's the end without special cable, remove any sharp objects near your brother ��
---------- Post added at 06:41 PM ---------- Previous post was at 06:03 PM ----------
Have you not got a recovery installed anymore?
I Can do nothing. It wont Turn on. The only thing is to plug it into the pc
have it powered off
hold powerup and connect it to the pc
does it start in download mode?
if yes you should be able to upload the stock rom with lgup
Keep us posted how or if you can resurrect the phone.
Can't Go to Download Mode still recognised as Qualcomm 9008
RingeHD said:
Hello,
I super hard bricked the Phone from my Brother and he need it for work. I flashed the wrong Stock-Rom.
No when I connect the Phone to the Computer it appears as Qualcomm HS-USB QDLoader 9008.
Is there anywhere an Option to repair it?
Thank you for your attention.
Click to expand...
Click to collapse
If you can't re-flash a stock ROM with LG UP, perhaps you can take matters in your own hand. But you have to viod the warranty for this. Also, you have to be able to enter fastboot mode.
Since you are from GB, I assume that you have the European H850, which can be bootloader-unlocked.
If so, you can try the following:
- Unlock bootloader
- Flash TWRP
- Flash the complete 10E ZIP file
I don't know if this works, but if your phone is messed up anyways, you can as well try this before throwing it away.
I can't do anything no charging, no turning on. Nothing. The only thing is that it is recognised as Qualcomm
Fix guide for xiaomi
If it's possible for xiaomi can't see why there isn't a way for lg.
http://en.miui.com/thread-226426-1-1.html
Did you try this
http://www.androidbrick.com/ultimat...agons-are-unbrickable-qhsusb_dload_qpst_qfil/
Sounds like you can use miflash/xiaomi tool for any qualcomm snapdragon device.
jazz452 said:
If it's possible for xiaomi can't see why there isn't a way for lg.
http://en.miui.com/thread-226426-1-1.html
Did you try this
http://www.androidbrick.com/ultimat...agons-are-unbrickable-qhsusb_dload_qpst_qfil/
Sounds like you can use miflash/xiaomi tool for any qualcomm snapdragon device.
Click to expand...
Click to collapse
Bumping
Yes, but the tool are not for the phone and won't recognise it
you didnt specify what happens when you plug in usb. the only thing you said was that you can do it instead of turning on or anything else.
When i plug in the phone the phone is still dead only the processor will be recognised. I need a tool to flash the software through QHUSB. I found boarddiag but no systemimage.tot File for the phone
Follow these steps:
1. Remove the battery
2. Put back the battery
3. Hold the volume Up and connect the USB
What happens after that? Do you have the "firmware update" screen on your phone or is still death?
Still death
RingeHD said:
Yes, but the tool are not for the phone and won't recognise it
Click to expand...
Click to collapse
The second link says for any Qualcomm processor.
Did you disable driver signature? Damn only for g3
It's looking like service centre I'm afraid.
http://forum.xda-developers.com/tmobile-lg-g5/help/qualcomm-t-mobile-hs-usb-hs-qdloader-t3391520
if you still have phone inhand conntact me for check phone...
RingeHD said:
Yes, but the tool are not for the phone and won't recognise it
Click to expand...
Click to collapse
Hey check Windows Certificate Manager (certmgr.msc). Remove ANY Certifications with "USB [something] TEST003" from "Trusted Publishers and Trusted basic certificate something (sorry I have to translate it but it is the 2nd from Current User Directory.
If you have ANY Quallcom drivers (uninstall it).
Find Qualcomm HS-USB QDLoader 9008 device under Ports (COM & LPT) and note the COMxy port (in my case it is COM3).
the same happened to me, you could solve it if you were telling me how please ...
the same happened to me, you could solve it if you were telling me how please ...
I think is possible to recover the LG G5 with this tool, but require a full compatible rom in that format, impossible to find.
Here another LG G5 bricked without the "Download" mode screen, only recognizer in USB with "Qualcomm HS-USB QDLoader 9008".
Galaxy S3 won't turn on but is detected by PC as "relink hs-usb qdloader 9008"
Hi everyone! I was given a Galaxy s3 recently, the SC-06D variant but it doesn't turn on no matter what. It won't boot into recovery or odin mode.
However, when I plug it in the PC its detected as "relink hs-usb qdloader 9008". Is there any way to fix my phone? If so what should I do?
Any help would be appreciated
Looks like the phone is hard bricked. You could try to revive the phone by booting with a boot image from an SD card and then try to flash a stock ROM.
Alternatively, you could try a cell shop that can force flash the stock firmware.
No power at all means only jtag can recover it. Dead phone. Time to upgrade.
However, if your pc is detecting it then the board is alive but may not be in a recognisable state. You might be best looking for a bootloader for that particular board (the same as the factory would use to get the firmware on it in the first place). See this: https://goo.gl/qFcdsF
Beamed in by telepathy.
shivadow said:
No power at all means only jtag can recover it. Dead phone. Time to upgrade.
However, if your pc is detecting it then the board is alive but may not be in a recognisable state. You might be best looking for a bootloader for that particular board (the same as the factory would use to get the firmware on it in the first place).
Beamed in by telepathy.
Click to expand...
Click to collapse
Will try this method right now. Thanks a lot
Hi,
I have an hard bricked ASUS ZB501KL with the whole eMMC erased, actually very hard bricked shall we say.
Now my phone is recognized as Qualcomm HS-USB QDLoader 9008 (it goes automatically in this mode without pressing any button) and whenever I plug in the USB Port(S) I get a BSOD, and that happens on all the PCs I've tried (they don't even boot while the phone is attached), so it may be an hardware problem. In usbdeview the device is shown as deactivated and I can't enable it.
Does anyone know how can I activate it? If so, may it be that my device does not go "legitimately" in this mode because of the completely erased eMMC? Thanks for all your replies...