Hello i have a huge problem with my k920 no boot no screen only blue led light when i connect the usb.In device manager is found as qualcomm hs-usb diagnostics 9006 (com13) everytime i connect it so is not discovered by emmc software.Is there any way i can fix it?bring it back to get the windows recognise it as hs-usb qdloader 9008 so i can flash new rom?
soulfreem said:
Hello i have a huge problem with my k920 no boot no screen only blue led light when i connect the usb.In device manager is found as qualcomm hs-usb diagnostics 9006 (com13) everytime i connect it so is not discovered by emmc software.Is there any way i can fix it?bring it back to get the windows recognise it as hs-usb qdloader 9008 so i can flash new rom?
Click to expand...
Click to collapse
Did you solve this problem? I have the same
Enter EDL Mode With K920
For Entering in EDL (Emergency Download Mode) In K920 ,
First try turn off your phone completely
then press Volume + and open your QFIL Program and connect usb cable to this (in this mode recognize as 9008 mode)
then you can flash it
but i flashed all rom that i know and still errors continues,
anyone know how can i Format my phone (Brush it from all previous things install on phones) ?
Enter testing, factory mode, power button+volume down. Wipe data, erase sd card, factory reset.
Same problem here.. Tried to flash with wrong model TWRP
Not only Blue light
K920
Hello everyone ...
While I was surfing the Internet suddenly the phone stopped responding then restart in boot loop.
I can enter recovery mode or download mode but the phone shut down or restart by it self in these modes
I tried wipe cache, safe mode, factory reset while the phone processing it shut down or restart before finish
when I enter the download mode and LGUP sees the phone as (unknown) then the phone shutdown
when I check after each process when the phone shutdown I can find (qualcomm hs-usb qdloader 9008) in the device manager.
If there is any solution for that I'll be thankful.
hi
PLS ADD THIS GUY (vo.minh.148) IN FACEBOOK. today 20/8/2017 this guy unbrick my H900 at&t . he just enter in my PC by teamviewer and i plug my mobile without battery. and he start..
keep ur KDZ file he will use it.
he charge me $20 after unbrick. now my phone is live
Hi.
1. I bricked my device many, many times. But never so hard. This time I can't revive it.
2. Yes, I checked every solutions, guides etc. Actually there are two guides, rest are only variations.
3. Yes, I tried many times every solution, tried to push other combinations with buttons, tried open computer apps as a supervisor and a normal user. For nothing.
What is the problem?
X820 is completely blind and deaf. I turned it off (force, power button) during the boot animation.
No ROM, no TWRP, no fastboot and - important - no diode (blue, red - whatever). Completely bricked.
After USB connecting my PC sees it as a Qualcomm HS-USB QDLoader 9008 (COM4).
That's it.
I tried yesterday and today many guides. I red:
https://forum.xda-developers.com/le-max-2/help/help-bricked-phone-t3707045
https://forum.xda-developers.com/le-2/how-to/repair-hard-bricked-phone-x52x-sd-t3648348
https://forum.xda-developers.com/le...k-fix-files-qfil-le-max-2-x820-t3423668/page2
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
https://www.gizmochina.com/2016/11/20/leeco-x820-max-2-super-unbrick-guide/
and few instructions from YouTube.
If the only way is FlashOne (version 1.9), every time I had a similar result: error after unzip (I tried 4 other ROMs). Problem with finding this or that file, but everytime problem in the same moment.
I tried turn off the device by: power button, power + Vol- and turn it on by: power, power + Vol+, power + Vol+ + Vol- (both). No difference (actually I heard if my device is on or off).
I really need working my own X820.
And I offer 25 euro if You can help me "step by step".
can you enter Qfile mode (Qualcomm HS-USB QDLoader 9008 (COM4))?
if yes, you need to check again with the FLASHONE program and the files of FlashOne (version 1.9), I remember there was version 1.8
AhmadSant said:
can you enter Qfile mode (Qualcomm HS-USB QDLoader 9008 (COM4))?
if yes, you need to check again with the FLASHONE program and the files of FlashOne (version 1.9), I remember there was version 1.8
Click to expand...
Click to collapse
Hi.
What do You mean "enter Qfile mode"?
When I connect the phone to PC with cable, PC usually sees my device as Qualcomm HS-USB QDLoader 9008 (COM4).
Sometimes as an unknown device. But nothing more.
Try this if pc detects your phone as Qualcomm HS-USB QDLoader https://drive.google.com/file/d/0B8In_WJch-UvQ3RtOGstbXdqUWs/view?usp=drivesdk
https://drive.google.com/file/d/0B8In_WJch-Uvb0xBbnBtbTlISDg/view?usp=drivesdk
If drivers error , install drivers manually
if your pc detects your phone as Qualcomm HS-USB QDLoader, then it is okay , it is just problem of the flashOne and recovery rom that u are using. Please check again.
pm me
i can slove this problem
pranjalm said:
Try this if pc detects your phone as Qualcomm HS-USB QDLoader https://drive.google.com/file/d/0B8In_WJch-UvQ3RtOGstbXdqUWs/view?usp=drivesdk
https://drive.google.com/file/d/0B8In_WJch-Uvb0xBbnBtbTlISDg/view?usp=drivesdk
If drivers error , install drivers manually
Click to expand...
Click to collapse
Thanks, but I tried FlashOne at least 10 times. 4 other ROMs and I always had some error after unzip.
Maybe you should try a different laptop. The method should work. Are you referring to "unzip error" as an error in flashone or are you trying to unzip the qfil file? Be more specific if it's flashone error.
Hey try this its for le2 but the process is similar
youtube.com/watch?v=iN9Ce3hKlRA
you can also try QPST and Mi flashtool
Hi again.
After few hours on other PC: failed.
I tried:
- two other drivers packs,
- FlashOne 1.9 (I didn't find 1.8 and 2.0 didn't work),
- four other ROMs (Qfil), probably 2 other (and 4 different names).
FlashOne opened as a supervisor and normal.
And I had always errors like this:
17:40:41: ERROR: function: sahara_rx_data:194 Unable to read packet header. Only read 0 bytes.
17:40:41: ERROR: function: sahara_main:854 Sahara protocol error
17:40:41: ERROR: function: main:265 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
Finish Download
So still nothing.
Do You have other ideas?
https://forum.xda-developers.com/zuk-z2-pro/how-to/howto-flash-stock-rom-t3435109
Try what the guys on the first page are suggesting, it might work. Also download the qfil that it's mentioned in the unbrick post in guides section, I should have uploaded it on mega and drive. That's 14s. The name should be without space when you save it, e.g.: Qfil_14s_Le_Max2.
You should not give up as you're on the right track. Phone is seen as Qualcomm 9008 (COM...). Try a different cable, different USB ports, a different computer again, maybe one with USB 2.0.
Even I experienced dsame problem but was able to revive my le max 2 by below mentioned guide.
Few important tips-
1. Place flash one in C drive
2. Press vol up, vol down & power button simultaneously before connecting d phone to PC.
3. Even if download fails, try 3-4 times & u vl succeed.
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
adityatiple said:
Even I experienced dsame problem but was able to revive my le max 2 by below mentioned guide.
Few important tips-
1. Place flash one in C drive
2. Press vol up, vol down & power button simultaneously before connecting d phone to PC.
3. Even if download fails, try 3-4 times & u vl succeed.
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
Click to expand...
Click to collapse
Thanks.
After 3 days it is time to stop.
No success.
2 PCs, 3 cables, 5 USB ports, dozens tries. And nothing.
Now I have to check somehow if the motherboard is OK.
For now thank You all. The best phone I ever had still dead.
All d best
MoRiA Cheo said:
Thanks.
After 3 days it is time to stop.
No success.
2 PCs, 3 cables, 5 USB ports, dozens tries. And nothing.
Now I have to check somehow if the motherboard is OK.
For now thank You all. The best phone I ever had still dead.
Click to expand...
Click to collapse
I wish u all d best
can you enter recovery mode?i have brick my x820 can repair using adb in recorvery
This is silly but maybe it helps... I had problems trying to flash my phone and the problem was the computer it was a 32bit computer so i switched to a 64bit one and it worked like a charm. Good luck
dylanmusik said:
can you enter recovery mode?i have brick my x820 can repair using adb in recorvery
Click to expand...
Click to collapse
No.
Nothing.
Absolutely none of lights on screen. And no LED.
It looks like dead. Only PC sees its as a Qualcomm... etc.
i wanted flash my phone so i follow this guild on youtube.
/watch?v=naQX9Was6DY
after flashing it got red light. it was fine before. i try the vol down +power and volume up and down + power but nothing works.
the computer recognize it as "Qualcomm HS-USB Diagnostics 900E"
i manage to get it to display " Qualcomm HS-USB QDLoader 9008" but dont know how to proceed from here.
Specs Before Dead:
Miui 7.012
Android 5.6
32 Gb Rom,3 Gb Ram (kenzo)
update:
i end up fixing my phone. it was in EDL Mode. i had Flash Using DFC Cable or Xiaomi EDL Cable. i made one from an youtube video ( it was one with button i made, it allow to get get QDLoader 9008 with consistency and without removing the back cover.)
afterthat i just flash it miflash tool with "kenzo_global_images_8.11.22_20181122.0000.00_6.0_global " it had to be DEVELOPER VERSION thought. i dont know if i can do it a second time because it might be a flute that it was able to flash at all LOL. and this is the only phone i have and i dont want to use an Iphone7. one thing i dont like is it wont let me flash twrp or OrangeFox- ( it said it can not found file flash_all.bat) cause when went push vol up + power it just give me standard xiami menu.
when i have a compatible phone on the same cell network, i'll try to flashing a diff rom cause the xiami rom has lots of ads. .
Bluesaky said:
i wanted flash my phone so i follow this guild on youtube.
/watch?v=naQX9Was6DY
after flashing it got red light. it was fine before. i try the vol down +power and volume up and down + power but nothing works.
the computer recognize it as "Qualcomm HS-USB Diagnostics 900E"
i manage to get it to display " Qualcomm HS-USB QDLoader 9008" but dont know how to proceed from here.
Specs Before Dead:
Miui 7.012
Android 5.6
32 Gb Rom,3 Gb Ram (kenzo)
please help
Click to expand...
Click to collapse
I think you have locked your bootloader. Well if that is the case try flashing TWRP again it will solve your problem.
Refer to this tutorial https://www.youtube.com/watch?v=xExKvog5RP4
LoadOP2 said:
I think you have locked your bootloader. Well if that is the case try flashing TWRP again it will solve your problem.
Refer to this tutorial watch?v=xExKvog5RP4[/url]
Click to expand...
Click to collapse
from you tube
tried it, didnt work. it said flash success. but the phone will not power on. VOL up +power not working, vol down + power not working either
Bluesaky said:
i wanted flash my phone so i follow this guild on youtube.
/watch?v=naQX9Was6DY
after flashing it got red light. it was fine before. i try the vol down +power and volume up and down + power but nothing works.
the computer recognize it as "Qualcomm HS-USB Diagnostics 900E"
i manage to get it to display " Qualcomm HS-USB QDLoader 9008" but dont know how to proceed from here.
Specs Before Dead:
Miui 7.012
Android 5.6
32 Gb Rom,3 Gb Ram (kenzo)
please help
Click to expand...
Click to collapse
Are you able to boot your device into EDL mode? If not, try to boot into EDL using the test point method if default method doesn't work. If you're successful in booting up in EDL, Follow the below forum to recover the bootloader and recovery.
Link to the test point method tutorial: https://www.youtube.com/watch?v=_jv1ZVQ95Ng
Follow this after you enter the EDL mode successfully: https://forum.xda-developers.com/redmi-note-3/how-to/unlock-unofficially-install-zcx-twrp-t3586778
Hi to everyone!
I have an old Huawei Ascend Y530 lying around, but I can't use it. The problem is that when I last used it, I thought it would cool to reset the phone by using the hidden Android Menu, when you hold down one of the volume buttons and the power button. I didn't understand anything though. I probably deleted the whole Android partiton. After that, when turned on, the notification LED would blink in red, blue and green, but that stopped after some months, probably because the battery died. It isn't completly dead though because when plugged in, it shows up as "QHSUSB_BULK" and after driver installation as "Qualcomm HS-USB QDLoader 9008". According to ChatGPT, it means that the phone is in Download Mode. I already tried getting the phone back using Qfil, but it always fails with the error "Download Fail: FireHose Fail: FHLoader Fail: The system can't find the specified file"(or similar, I had to translate it). When using an older version of Qfil, the error "Download Fail: Sahara FailSahara Fail". I'm really running out of ideas by now and if anybody knows anything about recovering that phone using Qfil, please give me some advice or if you have the necessary files, please leave them here!
Thanks in advance!
(and I hope it doesn't matter that the screenshots are in german)