My Mi Pad 2 is fully bricked, is there any solution?
this is what happend, I install LineageOS on it and it was fine, but then I wanted to change the recovery, then the OS wont boot so I try to put the old recovery in it, it also fails, so I tried to put windows on it, by booting an USB pendrive and mouse with an OTG cable when it start, but a signal of battery error appears, and now it wont boot at all. If I connect the tablet to the wall power, it shows me 0% loading, I left it for like 2 or 3 days connected and nothing, still 0%, when I try to power on the tablet, it shows me the battery icon with a warning sign /!\ and wont show me the "Mi" logo, just direct to the warning sign.
The pc wont recognize it either, and wont work any buttons combination, is there any solution?
This might be over 2 years late for you but the same thing happened to me and I thought i'd post the fix incase anyone else comes across this thread.
[FIX] Open the backing and simply untether the battery ribbon cable, im not sure if leaving it unplugged cleared any held memory so I left it for a good minute or so before reconnecting. Screw it all back together, turn it on, should work fine
sk3iron said:
This might be over 2 years late for you but the same thing happened to me and I thought i'd post the fix incase anyone else comes across this thread.
[FIX] Open the backing and simply untether the battery ribbon cable, im not sure if leaving it unplugged cleared any held memory so I left it for a good minute or so before reconnecting. Screw it all back together, turn it on, should work fine
Click to expand...
Click to collapse
Can you please describe the process of opening the back cover?
Thank you
Hannah
hannah187 said:
Can you please describe the process of opening the back cover?
Thank you
Hannah
Click to expand...
Click to collapse
remove the 2 screws at the bottom (they're torx t3? I think. a good set of precision screwdriver bits should have it) and use ideally plastic spudgers to spudge it out. its clipped in but it's really easy to remove. the back panel comes off by itself, and the rest of the tablet is self contained in a magnesium frame attached to the screen.
i was pretty impressed by the construction really. super solid!
So... I had the Mi pad 2 laying in my house running on MIUI 9 and one day I got curious and tried to unlock its bootloader.
I didn't remember my password and the recovery phone no. is discontinued now. and I couldn't change it or sign out.
So like an idiot, I factory reset it. And now it's asking for a password for the last mi id.
can anyone help me? Will and edl flash do the work?
THANKS
Ved0704 said:
So... I had the Mi pad 2 laying in my house running on MIUI 9 and one day I got curious and tried to unlock its bootloader.
I didn't remember my password and the recovery phone no. is discontinued now. and I couldn't change it or sign out.
So like an idiot, I factory reset it. And now it's asking for a password for the last mi id.
can anyone help me? Will and edl flash do the work?
THANKS
Click to expand...
Click to collapse
Just reinstall it like a PC
Related
Hi. The phone application was not functioning well and the F/C dialog showed up. I powered off the phone and from that point, the phone won't turn on.
The battery was fully charged before this happened.
When I press the power button, the phone vibrates for half a second, the screen brightens up but does not show anything but a black screen.
I removed SIM and SD cards, removed the battery and performed the above steps but nothing happened.
I also tried to put on the charger to see what's going on. Once I plug the charger, the phone's screen brightens but shows only blank (even without pressing the power button)
When connected to the charger, the green light for charging is on for some minutes, then goes off automatically.
I tried to connect it to the PC, and PC Companion finds the device as usually. It even shows the dialog on the pc screen to mount the device.
I tried a hard reset, but does not work
On some point, the sony logo appeared and then a dialog saying: "sorry process system is not responding". The first time I pressed Force Close and the phone turned off. Immediately after that, the phone turned on and showed the exact message. I pressed "Wait" but nothing happened in the next 15 minutes.
I called Sony's support center and they suggested a software update. Did the process exactly as it should, but again, even after the software update the screen shows nothing but black. It is all the time brightened for some reason.
I tried to turn off the phone for some time by removing the battery, but as soon as I put the battery back on, the phone's screen brightens and stays that way forever.
The phone was functioning perfectly up until this issue. The only application I had installed apart from some games, was AWDLauncher. On the screen I had only a TASK widget and a battery status widget.
The phone is 3 months old and has been always in perfect condition.
ANY help would be appreciated!!!!
Many Thanks
Try to format phone with this method hope it should work as it seems the issue is with OS only ..
http://forum.xda-developers.com/showthread.php?t=717949
Many thanks for the prompt reply. I will try to do so and let you know how it goes!
o0k00l said:
Try to format phone with this method hope it should work as it seems the issue is with OS only ..
Click to expand...
Click to collapse
I tried the steps found in the link you gave me, but I couldn't go any further after step no (5) from the tutorial, as it would require to enable Debugging mode and I cannot access the OS (since the device won't turn on).
Is there a way to format all the contents of the device and have them replaced by running SEUS (as it always says that my device is up to date now)?
Was it this:
http://www.sonyericsson.com/cws/sup.../detailed/updateservice/xperiax10?cc=gb&lc=en
That Sony Ericsson told you to do?
If not, use that.
Download it, follow the steps when it says you have the latest version, press "Install Anyway".
Hope this works.
Hi itTim. thanks for the response
this is what i did but no improvement at all ((
Sounds like you broke your LCD screen somehow.
That would suck because I broke mine and it cost me $200 to fix.
Hi Hypercore.
Yes that could be the problem. The thing is that I always took rally good care of the phone, always carried in a leather pouch and never droped it. How sensitive is this lcd anyway?? Did you notice any cracks on your lcd or was the problem simillar to mine?
Thanks
When you turn on the phone does the lcd backlight turn on?
If so, look for any faint lines of color (usually a hairline size). If you see any of those then your screen is cracked.
the backlight is on, but there are no lines of colour on the lcd screen.
another weird thing is that the green light on the top blinks one or two times every time i put on the battery. even if the phone is off, once I insert the battery turns on automatically after a couple of seconds.
If all else fails you could try to flash back to your original fw with the tools here:
ht tp://forum.xda-developers.com/showthread.php?t=683793
AyDee said:
If all else fails you could try to flash back to your original fw with the tools here:
ht tp://forum.xda-developers.com/showthread.php?t=683793
Click to expand...
Click to collapse
That won't do anything.
I had almost the same issue. Nothing worked. But, when I removed the battery and left it for a day (24h) without it, it just started working again. Still working without issues..
Good luck!
Devtone said:
I had almost the same issue. Nothing worked. But, when I removed the battery and left it for a day (24h) without it, it just started working again. Still working without issues..
Good luck!
Click to expand...
Click to collapse
Phones are very wierd pieces of technology. I once bricked my k610i and that's a phone that's supposed to be impossible to un-brick, but out of nowhere a month or so later i picked it up, hit power and it turned on perfectly. Made no sense at all, but it worked.
Taking the battery out for a long time probably took all the electrical charges from it (kind of like how a computer power supply / monitor can hold power charges) and reset your handset.
Hypercore said:
Phones are very wierd pieces of technology. I once bricked my k610i and that's a phone that's supposed to be impossible to un-brick, but out of nowhere a month or so later i picked it up, hit power and it turned on perfectly. Made no sense at all, but it worked.
Taking the battery out for a long time probably took all the electrical charges from it (kind of like how a computer power supply / monitor can hold power charges) and reset your handset.
Click to expand...
Click to collapse
Indeed. It could be a frozen chip, memory fault, power-regulator and so on.
Hypercore said:
That won't do anything.
Click to expand...
Click to collapse
Ah, debug mode needed- I see now
tasaki said:
I tried the steps found in the link you gave me, but I couldn't go any further after step no (5) from the tutorial, as it would require to enable Debugging mode and I cannot access the OS (since the device won't turn on).
Is there a way to format all the contents of the device and have them replaced by running SEUS (as it always says that my device is up to date now)?
Click to expand...
Click to collapse
if you have done this and did not worked , then it is the LCD.
send it to workshop and check it there.
Guys i Really need the solve of this problem , my xperia has blank screen now without backlight and the phone completely doesn't work . when i put the battery and prees the switch botton it gives me 3 red signals , i've updated and hard reset but it didn't work , and btw the LCD is fine , any idea. did removing the battery worked???? . please answer
After a looooot of time since my latest post, finally my Xperia came back to life. There was a battery failure which means the phone was ok all the time. Weird thing is that the led light showed that the battery was charging ok. I removed the battery and after a lot of time it is working ok again. This was really really odd.
FYI for anyone else that gets this issue.
I just had this for the past hour after trying to change my baseband....could not get it back for anything.
What I did finally try was run another baseband via flash tool, connected to usb and it started flashing....after flash phone powered on again...yeah I agree with everyone, that is freaking scary when it happens.
HELP ME. Flashed CwmFolio_v02_update.zip from one of the tread from this forum. I think most of you know which one.
After clicking reboot system in the menu in clockwork.. the tablet just stalled..
black screen. nothing.
BUT, the home, back, search, and menu button still works.
power button not working.. long press and still nothing.
power light still up.
connected to pc through mini usb. not detected.
the only solution i could think of now is to wait for the battery to dry out, which could take forever as the battery was still 79% the last time i saw it.
is it possible for me to take out the battery?.. like i normally does when my laptop stuck??
Help me please..
You can unlock the back on the left side and remove the back cover. Then you can also remove the battery.
atiti said:
You can unlock the back on the left side and remove the back cover. Then you can also remove the battery.
Click to expand...
Click to collapse
if there any step by step instruction on how to do that?.. or maybe just any tips about what i should be careful with when removing the battery?
1. Slide the lock to the unlock position on the left side (when facing the device)
2. Open the back by using the little gap on the top left side of the device (it might sound like its breaking, but its not..)
3. Then pull out the battery by using the handle for it
Its relatively straight forward Not much you can mess up if your careful.
atiti said:
1. Slide the lock to the unlock position on the left side (when facing the device)
2. Open the back by using the little gap on the top left side of the device (it might sound like its breaking, but its not..)
3. Then pull out the battery by using the handle for it
Its relatively straight forward Not much you can mess up if your careful.
Click to expand...
Click to collapse
Thank YOu soo much!.
i think the problem is with clockworkmod. i installed a version using rom manager. before that already flashed a modded version from this forum. the last time i installed another modded one with support for internal sd.. also from this forum.. maybe any one of that caused the problem.. anyway.. removing the battery and reinserting it seems to do the job. Thanks again!
gingerboy92 said:
HELP ME. Flashed CwmFolio_v02_update.zip from one of the tread from this forum. I think most of you know which one.
After clicking reboot system in the menu in clockwork.. the tablet just stalled..
black screen. nothing.
BUT, the home, back, search, and menu button still works.
power button not working.. long press and still nothing.
power light still up.
connected to pc through mini usb. not detected.
the only solution i could think of now is to wait for the battery to dry out, which could take forever as the battery was still 79% the last time i saw it.
is it possible for me to take out the battery?.. like i normally does when my laptop stuck??
Help me please..
Click to expand...
Click to collapse
Did you by chance have an usb device connected? I managed to get this kind of lock twice, but only when I had my usb flash disk attached/removed while I was in recovery.
mblaster said:
Did you by chance have an usb device connected? I managed to get this kind of lock twice, but only when I had my usb flash disk attached/removed while I was in recovery.
Click to expand...
Click to collapse
i didn't remember exactly what happened, but im not mistaken I didn't have any usb connected at that time. just the sd card.
Hello. I have the same problem. I flashed my tablet Folio 100. (FolioMod v1.4). After restarting remained only a black screen (not even Toshiba logo). I choose the battery and waited 10 minutes. The problem remains. What should I do? Help me!
I saw on several forums your are the best in what you do.
I have a major problem.
My little brother played on my folio( never had to give him this) i had your latest update 3x and it freezed. and for one or another reasen he pushed several types on power butten. now my folio is crashed. if i turn it on, i just have the powerlight, nothing more.
i already took my battery out and even pushed on reset button but nothing works
please help
thanx in advance
francigel said:
... and then after to have read how to install a huawai key, thanks the installation instruction posted by DERARTEM i have proceeded....but at the end I have got a big problem...the tablet is rebooted ...then I saw the logo TOSHIBA but at the end the screen remained black....
Click to expand...
Click to collapse
DerAartem technique works with version FolioMod 1.3
It changes the boot
If your boot is corrupted, you still have a black screen
You can change the boot.img with fastboot command
Code:
fastboot erase linux
fastboot flash linux boot.img
fastboot reboot
Hi guys. Is there any fix for my P7500 tab?
It wont turn on, black screen, but can be detected by the computer via apx.I use to flash it via apx or nvflash but I it was locked tablet. Is there any ways to boot it up so i can flash it via odin?
Thank you in advance for the reply.
psychoneo said:
Hi guys. Is there any fix for my P7500 tab?
It wont turn on, black screen, but can be detected by the computer via adx.I use to flash it via adx or nvflash but I it was locked tablet. Is there any ways to boot it up so i can flash it via odin?
Thank you in advance for the reply.
Click to expand...
Click to collapse
So do you mean adb or apx?
Sent from my GT-P7510 using XDA Premium 4 mobile app
...
stinky73 said:
So do you mean adb or apx?
Click to expand...
Click to collapse
Oh sorry. APX i mean. my question above is now edited. Any idea sir? or i should brought it to samsung service center?
Maybe the only thing to try at the moment would be the old battery drain technique... Usual means is to tape down the power button and wait days and days until it is dead, really dead ( shows nothing when connected to computer), then connect to wall charger and reboot and see what you get. This is really the ultimate "hard reset" but same result can be obtained far more quickly by removing the back and disconnecting the battery for a while to remove residual charge... Not as frightening or difficult as it might seem, have done it loads of times for various faults and to replace batteries in several tabs.
Sent from my GT-P7510 using XDA Premium 4 mobile app
onoeowh eye
stinky73 said:
Maybe the only thing to try at the moment would be the old battery drain technique... Usual means is to tape down the power button and wait days and days until it is dead, really dead ( shows nothing when connected to computer), then connect to wall charger and reboot and see what you get. This is really the ultimate "hard reset" but same result can be obtained far more quickly by removing the back and disconnecting the battery for a while to remove residual charge... Not as frightening or difficult as it might seem, have done it loads of times for various faults and to replace batteries in several tabs.
Click to expand...
Click to collapse
thank you sir. Im doing it now. But Im a doing it correctly? i just connected it to the computer for apx mode then after that i tape the power button so that it continuously on and off for apx mode then i disconnected it to the computer or I should leave it stay? i think it will charge if i connected it to the computer.
If you're trying to discharge by taping down power button just leave the tab on it's own not plugged into anything... Plugging into something that charges rather defeats the object of the exercise
Sent from my SGP311 using XDA Premium HD app
Samsung Service Center
Thank you for the help. I think I need to bring it to service center. There's no battery charging icon when I charged it. I dont know if its well drain but I use a laptop cooling fan via OTG to drain it. the fan and the lights from the cooling pad is not functioning anymore so i try to plug the tab to the wall charger and nothing happens.
By the way thank you. :good:
Any luck?
psychoneo said:
Thank you for the help. I think I need to bring it to service center. There's no battery charging icon when I charged it. I dont know if its well drain but I use a laptop cooling fan via OTG to drain it. the fan and the lights from the cooling pad is not functioning anymore so i try to plug the tab to the wall charger and nothing happens.
By the way thank you. :good:
Click to expand...
Click to collapse
I'm facing the same issue now, i have taped my power and volume button for a day... will that work? Did you finally turn on your tablet?
omeshls said:
I'm facing the same issue now, i have taped my power and volume button for a day... will that work? Did you finally turn on your tablet?
Click to expand...
Click to collapse
In some cases it takes more than a day, be patient... Unless you are prepared to remove the back and unplug battery... The aim of the game is to completely power down the tab and remove residual charge in components, the "hardest" reset available.... So, two ways to achieve that is drain battery or disconnect battery... If you drain battery you must be sure it's empty to achieve desired effect then you obviously cannot restart it without charging a bit as the battery is empty, so you connect charger then try to boot, but the tricky bit is being sure the battery is completely drained otherwise you are just wasting your time... That is why battery disconnect is preferable
Sent from my SGP311 using XDA Premium HD app
How to disconnect battery
stinky73 said:
In some cases it takes more than a day, be patient... Unless you are prepared to remove the back and unplug battery... The aim of the game is to completely power down the tab and remove residual charge in components, the "hardest" reset available.... So, two ways to achieve that is drain battery or disconnect battery... If you drain battery you must be sure it's empty to achieve desired effect then you obviously cannot restart it without charging a bit as the battery is empty, so you connect charger then try to boot, but the tricky bit is being sure the battery is completely drained otherwise you are just wasting your time... That is why battery disconnect is preferable
Sent from my SGP311 using XDA Premium HD app
Click to expand...
Click to collapse
How do you disconnect the battery to discharge. I tried the taped power button for five days and it still seen by PC in Device Manager.
datastar said:
How do you disconnect the battery to discharge. I tried the taped power button for five days and it still seen by PC in Device Manager.
Click to expand...
Click to collapse
Suggest you go here http://forum.xda-developers.com/showthread.php?t=2325109 download the manual - then unplug the battery for 10 mins or so to remove any residual power, reconnect and see what happens
Good luck
Edit....I got beat to the post. I would follow the advice above first.
datastar said:
How do you disconnect the battery to discharge. I tried the taped power button for five days and it still seen by PC in Device Manager.
Click to expand...
Click to collapse
Look for some videos on YouTube because it involves removing the back of your tab. So see seeing it done is a great help.
Sent from my GT-P5210 using XDA Premium HD app
Happy camper iFixIt
stinky73 said:
Suggest you go here http://forum.xda-developers.com/showthread.php?t=2325109 download the manual - then unplug the battery for 10 mins or so to remove any residual power, reconnect and see what happens
Good luck
Click to expand...
Click to collapse
Many Thanks to You stinky73
I had to purchase an iFixIt repair kit to get the correct driver to remove the two screws. I disconnected the battery, waited ten minutes and when I reconnected I was SO HAPPY to see the battery charging icon. I charged for a while a fired up the tablet. Everything was the same as if nothing happened. I am so happy because Samsung said they could fix the problem and it would be a flat rate of $150 which I don't have and I would lose everything.
Many thanks
datastar said:
Many Thanks to You stinky73
I had to purchase an iFixIt repair kit to get the correct driver to remove the two screws. I disconnected the battery, waited ten minutes and when I reconnected I was SO HAPPY to see the battery charging icon. I charged for a while a fired up the tablet. Everything was the same as if nothing happened. I am so happy because Samsung said they could fix the problem and it would be a flat rate of $150 which I don't have and I would lose everything.
Many thanks
Click to expand...
Click to collapse
How hard was removing the back? I'm wanting to do some building for my 7510 and will be using it for testing so I'm most likely to brick it at least once or twice.
Hard screw removal
Benzoman said:
How hard was removing the back? I'm wanting to do some building for my 7510 and will be using it for testing so I'm most likely to brick it at least once or twice.
Click to expand...
Click to collapse
It took me longer to remove the screws then anything. I stripped them and will need to replace them. I tried a regular screwdriver before the tri-wing screw driver and paid dearly in time. Once the two screws were removed, use a plastic pry tool starting on the bottom where the screws are because once the bottom and sides are pried lose, the top will slide over the extended audio jack.
1.5 hours to remove stripped screws
10 minutes to pry open
1 minute to disconnect battery (did not remove battery or three data cables on top of battery)
10 minutes wait for discharge
3 minutes to re-connect battery cable (it slides forward and snap down)
2 minutes to replace case
datastar said:
Many Thanks to You stinky73
I had to purchase an iFixIt repair kit to get the correct driver to remove the two screws. I disconnected the battery, waited ten minutes and when I reconnected I was SO HAPPY to see the battery charging icon. I charged for a while a fired up the tablet. Everything was the same as if nothing happened. I am so happy because Samsung said they could fix the problem and it would be a flat rate of $150 which I don't have and I would lose everything.
Many thanks
Click to expand...
Click to collapse
Happy for you, it usually works!! :good:
stinky73 said:
Happy for you, it usually works!! :good:
Click to expand...
Click to collapse
Forgive the gravedigging, but I am unable to find anything regarding my situation, and the original poster has a problem that is similar to mine (my thread is http://forum.xda-developers.com/showthread.php?p=52931715 ). I hope someone is able to give me a hand here!
I am wondering, it has been over 15 minutes since I disconnected the battery completely, but connecting the P7500 to my laptop still shows an APX device being connected. Could there be some hardware issue preventing the device from being fully discharged?
Thanks in advance for any help!
Still no joy with waking the tablet up
Lightside said:
Forgive the gravedigging, but I am unable to find anything regarding my situation, and the original poster has a problem that is similar to mine (my thread is http://forum.xda-developers.com/showthread.php?p=52931715 ). I hope someone is able to give me a hand here!
I am wondering, it has been over 15 minutes since I disconnected the battery completely, but connecting the P7500 to my laptop still shows an APX device being connected. Could there be some hardware issue preventing the device from being fully discharged?
Thanks in advance for any help!
Click to expand...
Click to collapse
I've got the same issue as Lightside and the original poster. Mine is a GT-P7500, which had CM10 nightly ROM with CWM recovery. I sold it on eBay, but before selling, I wiped the tablet and got it back to the Clockworkmod main screen. I turned it off completely and shipped it to the buyer, ready for it to be registered by the new user.
The buyer received the tablet and from the e-mails I received from him in the first couple of days, all was going well. Then, a couple of days later, he sent me an e-mail saying that the screen shows the android lying on its back with "Odin download" mode showing. A day later, he sends me a messaging saying that he can't turn the tablet on at all. The guy who bought it is an old man and didn't know much about fixing the issue. I asked him whether he powered the tablet off while still plugged in to the wall charger and he confirmed that he did. I asked him to return it to me and I can try and fix it, so now, I have the tablet back and it won't turn on. Here's what is happening:
1. I drained the battery using the cellotape method
2. Installed the NVflash drivers
3. Waited for the battery to drain (almost 9 days and the LED flash stopped blinking, so assumed it was completely drained)
4. Plugged it in to the PC and it immediately showed up again as a device under the USB controllers within Device Manager
5. I then unplugged the battery by opening the back of the tab, left it for 15 mins, then tried the wall charger again, but nothing. No charging icon on the screen.
When I try to press the power button, I can see the LED light up, but the screen is still blank.
Could this be a hardware issue and if so, what do you think could have caused it?
Could really do with some help here, folks! I don't want to have to give the buyer a refund because technically, he got it when it was in working condition and he probably did something to screw it up, but since he's an old man, I thought I'd try and help him, if I can.
same to me
someshj1577 said:
I've got the same issue as Lightside and the original poster. Mine is a GT-P7500, which had CM10 nightly ROM with CWM recovery. I sold it on eBay, but before selling, I wiped the tablet and got it back to the Clockworkmod main screen. I turned it off completely and shipped it to the buyer, ready for it to be registered by the new user.
The buyer received the tablet and from the e-mails I received from him in the first couple of days, all was going well. Then, a couple of days later, he sent me an e-mail saying that the screen shows the android lying on its back with "Odin download" mode showing. A day later, he sends me a messaging saying that he can't turn the tablet on at all. The guy who bought it is an old man and didn't know much about fixing the issue. I asked him whether he powered the tablet off while still plugged in to the wall charger and he confirmed that he did. I asked him to return it to me and I can try and fix it, so now, I have the tablet back and it won't turn on. Here's what is happening:
1. I drained the battery using the cellotape method
2. Installed the NVflash drivers
3. Waited for the battery to drain (almost 9 days and the LED flash stopped blinking, so assumed it was completely drained)
4. Plugged it in to the PC and it immediately showed up again as a device under the USB controllers within Device Manager
5. I then unplugged the battery by opening the back of the tab, left it for 15 mins, then tried the wall charger again, but nothing. No charging icon on the screen.
When I try to press the power button, I can see the LED light up, but the screen is still blank.
Could this be a hardware issue and if so, what do you think could have caused it?
Could really do with some help here, folks! I don't want to have to give the buyer a refund because technically, he got it when it was in working condition and he probably did something to screw it up, but since he's an old man, I thought I'd try and help him, if I can.
Click to expand...
Click to collapse
i have a GT-7500 ,i used the original firmeware,it's the same issue,drain battery method not working,somebody help?
All
While flashing my LS990 back to stock (was rooted/TWRP) my dog hit my laptop and the USB cable unplugged and the battery popped out right in the middle of the process. Now when I try to enter download mode it simply reboots to the LG logo and when trying to enter recovery I get the same (says Entering Recovery then just reboots). Am I screwed/bricked? Is there any way to recover from this or am I buying a new phone? UGH UGH UGH.
Any help would be greatly appreciated - I work in technology so being without a phone, even for a few hours won't fly so I may be driving to Sprint here in a few minutes...
-Ross
When you have it plugged in is it not recognizing or what is it doing? The reason I am asking is because, depending on how your dog pulled out/ stepped on the wire may tell you if the adapter in the phone is broken. When your in flashtool and it is searching try moving the wire in phone up and down till you find a "Sweet spot" then just hold it like that till it is done. Also change the usb on the computer you are using like try a different usb port. Not on the software on the sides
If you need any more help like really fast just PM me or else I wont check this till like tomorrow
First thanks for taking the time to help. It's never recognized by my Windows 8 box as it never gets into recovery or download mode. When I try download mode it simple reboots back to the LG screen and with recovery it says its entering recovery then reboots. So the PC never ever sees it in device manager at all as it won't boot that far. Honestly I think it's toast and I'm just gonna have to replace it. Ugh.
-Ross
Since your phone is in that little area you maybe able to run the command: adb reboot bootloader
defiantly try the wire jiggle thing that maybe the reason I had a similar problem with a nexus 4 my dog stepped on the wire while it was charging and the bottom adapter messed up and I had to hold a wire for like a half hour to get it to flashback then I just had to return it to t-mobile.
All change usb port use another one that you know works.
It's not a physical connection issue now - that works fine. it's that since it got cut off mid flash I think the boot loader is only half written or something. So it never shows in ADB since it just reboots over and over and over. Nothing can get it to stop/settle down.
I assume I'll be taking it to Sprint tomorrow to see if they'll be nice to me...
First of all, sorry if this isn't the right place to post this thread.
Last night i was playing TFT on my Xiaomi Mi 10 as it shut itself down without any warning.
I'm sure i had more than 20% battery left.
This device is about 1 month old, and it crashed one time before, but i could just reboot it with the power button.
This time though, no reaction.
I tried every possible combination of Volume Up/Down and Power button presses, nothing. No vibration, nothing on the screen, just plain nothing.
It literally bricked itself. I did not root it or anything similar, I just used it normally.
Any ideas on what caused this, and more importantly how to fix this? I can't believe this.
PO5T MORTEM said:
First of all, sorry if this isn't the right place to post this thread.
Last night i was playing TFT on my Xiaomi Mi 10 as it shut itself down without any warning.
I'm sure i had more than 20% battery left.
This device is about 1 month old, and it crashed one time before, but i could just reboot it with the power button.
This time though, no reaction.
I tried every possible combination of Volume Up/Down and Power button presses, nothing. No vibration, nothing on the screen, just plain nothing.
It literally bricked itself. I did not root it or anything similar, I just used it normally.
Any ideas on what caused this, and more importantly how to fix this? I can't believe this.
Click to expand...
Click to collapse
I guess, that your battery is totally empty. Put on charger and leave on it few hours long.
krepsz said:
I guess, that your battery is totally empty. Put on charger and leave on it few hours long.
Click to expand...
Click to collapse
I charged it 4 hours in the night and right now since 3 hours
Call service. Sorry. If it doesn't boot into fastboot (vol-&power) things are bad...
Try plugging in your phone to a computer. I had a similar thing happen to another phone a little while ago when out of the blue it just died. I tried charging it, wireless charging it, trying power buttons etc but it instantly fixed itself when I plugged in the phone to my computer via USB. Let us know how it went.
PO5T MORTEM said:
I charged it 4 hours in the night and right now since 3 hours
Click to expand...
Click to collapse
Try different cable or check if the cable you use is working. Then press both volume up, down, and power button for at least five minutes. It might reset the phone. It happened to me once time not on the mi 10 but my rog phone 2 and I press that 3 buttons combination and the phone booted up again. I know the mi 10 might not work the same way as the rog phone 2 but you have nothing to lose to try it.
Yeah I tried using another cable, although I know this cable works (old phone). I also tried charging it via my PC, I even tried to connect to it via ADB, it didn't show up in the device list after installing the drivers.
Pretty sure I'm going to give it to service, I still got warranty and I even have insurance for it.
Because of that I don't want to open it to get the battery out and back in, although I'd really really like to know what caused this. I literally played a game and zap it goes black never to be seen again... I hope the service finds the cause and tells me.
Anyway, thank you really much for the suggestions and the help. Incase I get to know what caused this I will write it here as long as I remember to. Until then Cheers Lads.
Same here. My step-daughter purchased this phone and received it Tuesday morning. Now it won;t respond to anything.
I was handed the phone with "pcsuite.mi.com" on the screen but upon connecting to my laptop the screen went black and now won't respond to anything at all. No Recovery mode, no fastboot mode, no vibrations, nothing.
From reading reports online from other users, it seems like Xiamoi really "dropped the ball"/"shat the bed" with this model
edit2add (just seconds after posting)
I've also performed "lsusb" to see if the device is alive and there's nothing there either