Hey, now I have Amazfit Pace, In the past I had MI Band - There was an option to get alert every hour with no movement (I work in the office and sometimes forget hours to move!). How can it be done on the Amazfit?
Thanks
http://forum.xda-developers.com/smartwatch/amazfit/app-step-notify
You can delete...
Related
I have an Amazfit Bip clock and it has blocked in "Activity" page.
The touch screen does not respond, the physical side button either, the Mi Fit fails to connect, ...
The clock continuously displays that "Activity" menu screen and you can not interact with it.
How can I reset it or what should I do to use the watch?
I use Mi Fit 3.0.5, FW-0.9.14
Thanks
montarelonf said:
I have an Amazfit Bip clock and it has blocked in "Activity" page.
The touch screen does not respond, the physical side button either, the Mi Fit fails to connect, ...
The clock continuously displays that "Activity" menu screen and you can not interact with it.
How can I reset it or what should I do to use the watch?
I use Mi Fit 3.0.5, FW-0.9.14
Thanks
Click to expand...
Click to collapse
Yes, it happens when BIP trying updating A-GPS data. Run MiFit, keep watch close phone and let him update. Sometimes is failed, but close MiFit, clear memory and try again until success.
Thanks a lot.
In fact, it must be something related to what you say, becasuse as soon as the clock was recovered and connected again to the Mi Fit, it began to update the A-GPS.
What I do not know is if the solution you proposed works, because while it was blocked, the Mi Fit did not recognize it (it always put Connecting ...), it did not connect and I mismatched it and then I could not find it to link it again. That is, there was no bluetooth connection between My Fit and Clock, so I do not know how I could have updated the A-GPS clock trough the Mi Fit
Fortunately, the clock went off and when I put it to charge it started well and it works.
Hi there,
since today i have got the same problem. Sadly the battery is charged 100% so waiting for discharge may take some time. Does somebody know how to reset or force reboot or force discharge the watch?
Thanks in advance!
Amazfit bip problem
Hi, i got exactly the same problem with you..
After i switched my smartphone (from huawei P9 to LG V20) My amazfit Bip suddenly updating A GPS and after that, the touch display is hardly responding, then when i long press the button, it start to displays workout session that cannot be stopped or interrupted in the meantime, Mi Fit can not sync/interract during workout session).
After spent several frustating days, finally i conclude that the main issue is the firmware.
So here is what i did :
- Let the Amazfit watch battery drain (since the activity/workout session can not be stopped, it will drain faster than ussual).
- Recharge the watch until more than 10% and re-connect it to Mi Fit app. (Don't charge it too long, because when something goes wrong you will have to take time to drain the battery again).
- Download NOTIFY & FITNESS FOR AMAZFIT" app from google playstore and connect your Amazfit with the app.
- When the Amazfit Bip paired to Notify & Fitness For Amazfit,
unpaired the watch from the Mi Fit App, then uninstall Mi Fit from your phone.
- Now you have only 'Notify & Fitness for Amazfit' app connected to your amazfit bip.
.- Go to setting section in the app, scroll down and you will find firmware update section, then update the amazfit firmware (you will find some option : english/spain/italian etc., i've choosen english version)
- There imare 3 items that you have to sequintly update one by one : firmware, recources and gps (i failed to update the gps, but all i know, it doesn't matter anyway...)
- After the update finished (sometimes it failed, but i repeat it on and on untill it's succeed), my amazfit starts to work proper and not displaying work out session anymore.
Notify & Fitness for Amazfit is my saviour!
It works better than the official Mi Fit app.
Blocked after Workout
I also had a blocked Amazfit Bip:
On my first workout (a 3 hour bicyle ride), I wanted to stop it. Unfortunately the watch always restarted the workout again.
First I thought that I had double tapped the screen after pressing the Ok (to finish) button. But I tried this for at least 30 times. It always restartet the workout.
I still got a connection from the Mi Fit App, but it told me that the watch is within a workout.
I disconnected / reconnected the MiFit App several times and somehow I was able to quit the Workout.
I immediately switched off the watch, restarted and everything was fine again. No new firmware flashing was required.
I only have it since two days.
[Firmware 0.1.0.26]
My Pace started to baaadly delay notifications It started about 2-3 weeks ago, it's irregular, about 1/3 notifications does not goes in-time. Delay is sometimes 10sec, sometimes 40 seconds or even a few minutes! The most annoying thing is that sometimes I have a call (not notified on Pace), I pickup, end it in 20 seconds, put my mobile on desk and...bam! - notification on Pace pops out. Very annoying.
I did a factory reset after WOS installed, nothing helped. I enabled screen-on if notification arrived on mobile, still no-go. Do you have any idea what's wrong with my setup?
I'm using Huawei Mate 9 EMUI 5 Nougat, Watch App v2.3.0/v2.3.2, Amazfit Pacefied rel 39 (v1.2.51) and WOS 2.6.0.12
You've asked for an idea, so: turn off Wi-Fi on your phone, and observe if it gets better.
lfom said:
You've asked for an idea, so: turn off Wi-Fi on your phone, and observe if it gets better.
Click to expand...
Click to collapse
Thanks for tips, but unfortunately does not help at all :/ It looks like watch app service is delayed somehow....
Are you sure that Amazfit app is not being killed while it's in background? Some phones have strict settings that would kill non system apps in background to save battery, even disable Bluetooth. Unless the watch has a Bluetooth problem, the culprit is the phone. Can you pair the watch to other phone for tests? Did you change anything on your phone at the time the notifications started to lag?
Hello I am facing the same problem. My phone is the Huawei nova with android nougat and emui 5
Hello,
Is it possible to make an option available in the Amazfit Stratos where there is an automatic scroll of the data fields for 4-5 seconds like Garmin has?
In the latest firmware there was also a bug when the watch was entering auto pause mode: after i was riding again, the first page of the watch was showing even though i had selected the third Page (HRM).
Thanks for making amazfit Stratos better and better [emoji847]
Grtz
https://support.amazfit.com/hc/en-us/requests/new
Hello,
in Germany, last night clocks were adjusted at 3:00am to 2:00am due to dayliht saving. My Android phone switched the time instantly, my Amazfit BIP ignored it, even at 11 am, the time was still faulty, syncing with the Mi Fit app didn't help. The only thing that helped was to unbind and rebind the BIP to the phone
This is really a pitty, I wonder how often at all the BIP does syncronize at all, and why the people developing this piece of software are so ignorant not to implement the most obvious use-cases.
Any tips and hints how the time sync behaviour can be improved? Thanks!
Turn off and then on the Bluetooth. That's all. Works every time. I travel a lot and that's what I do to sync the time when I change timezones.
Sent from my Huawei P9 using Tapatalk Pro
A lot Xiaomi/Amazfit Products (Miband, Bip, Cor etc) has to connect one time to mifit after time change to get the right time again! I use mifit since a few years now and i‘ve never a problem with the time change!
I tried reconnecting bluetooth as well as syncing in the MiFit App, both did not help. Only unpairing and repairing solved the issue Even if these two did work, it is a shame that things like that do not work automatically out of the box...
Hello, i have same issue. Just turn off and on your bip and it solve the problem.
Restart the phone
I had same issue today and restarting the phone connected to my BIP solved the issue instantly. Hope it helps!!
4 years later and my brand new Amazfit Band 7 ignores daylight saving even after a full shutdown. Disappointing indeed because (almost) all my devices, clocks, watches use either DCF or NTP to avoid this issue in the first place.
Last week I got an amazfit band 5. I already had a stratos 3. Today I ran 20km wearing both the band and the watch, recording the activity only on the stratos. The band 5 was the active device. Then when done I did a manual data sync from the stratos without activating it. I was hoping to get PAI AND all the firstbeat metrics. The data sync worked or it least it said it did but the activity didn't show up in zepp or strava so after maybe 5 minutes I activated the stratos and synced from zepp. Then the activity displayed in zepp. Finally I activated the band 5 again, because it's more comfortable and might be better for sleep etc.. This last step reset my 18k steps in zepp back to zero which was disappointing. I did get 79 pai though.
Should I have waited longer before giving up and activating the stratos or can't this be done?
EDIT* Answering my own question. Yes I should have waited. Today I tried again except this time with an indoor rowing activity on the stratos and a manual data sync from the watch and the activity displayed in zepp and synced to strava without me having to activate the stratos in zepp. I might go back to wearing the bip s.
Sleep detection on the band is pretty strange. Says I was in rem sleep while reading in bed.