Req: Automatic scroll of data fields - Amazfit

Hello,
Is it possible to make an option available in the Amazfit Stratos where there is an automatic scroll of the data fields for 4-5 seconds like Garmin has?
In the latest firmware there was also a bug when the watch was entering auto pause mode: after i was riding again, the first page of the watch was showing even though i had selected the third Page (HRM).
Thanks for making amazfit Stratos better and better [emoji847]
Grtz

https://support.amazfit.com/hc/en-us/requests/new

Related

Amazfit Bip Blocked

I have an Amazfit Bip clock and it has blocked in "Activity" page.
The touch screen does not respond, the physical side button either, the Mi Fit fails to connect, ...
The clock continuously displays that "Activity" menu screen and you can not interact with it.
How can I reset it or what should I do to use the watch?
I use Mi Fit 3.0.5, FW-0.9.14
Thanks
montarelonf said:
I have an Amazfit Bip clock and it has blocked in "Activity" page.
The touch screen does not respond, the physical side button either, the Mi Fit fails to connect, ...
The clock continuously displays that "Activity" menu screen and you can not interact with it.
How can I reset it or what should I do to use the watch?
I use Mi Fit 3.0.5, FW-0.9.14
Thanks
Click to expand...
Click to collapse
Yes, it happens when BIP trying updating A-GPS data. Run MiFit, keep watch close phone and let him update. Sometimes is failed, but close MiFit, clear memory and try again until success.
Thanks a lot.
In fact, it must be something related to what you say, becasuse as soon as the clock was recovered and connected again to the Mi Fit, it began to update the A-GPS.
What I do not know is if the solution you proposed works, because while it was blocked, the Mi Fit did not recognize it (it always put Connecting ...), it did not connect and I mismatched it and then I could not find it to link it again. That is, there was no bluetooth connection between My Fit and Clock, so I do not know how I could have updated the A-GPS clock trough the Mi Fit
Fortunately, the clock went off and when I put it to charge it started well and it works.
Hi there,
since today i have got the same problem. Sadly the battery is charged 100% so waiting for discharge may take some time. Does somebody know how to reset or force reboot or force discharge the watch?
Thanks in advance!
Amazfit bip problem
Hi, i got exactly the same problem with you..
After i switched my smartphone (from huawei P9 to LG V20) My amazfit Bip suddenly updating A GPS and after that, the touch display is hardly responding, then when i long press the button, it start to displays workout session that cannot be stopped or interrupted in the meantime, Mi Fit can not sync/interract during workout session).
After spent several frustating days, finally i conclude that the main issue is the firmware.
So here is what i did :
- Let the Amazfit watch battery drain (since the activity/workout session can not be stopped, it will drain faster than ussual).
- Recharge the watch until more than 10% and re-connect it to Mi Fit app. (Don't charge it too long, because when something goes wrong you will have to take time to drain the battery again).
- Download NOTIFY & FITNESS FOR AMAZFIT" app from google playstore and connect your Amazfit with the app.
- When the Amazfit Bip paired to Notify & Fitness For Amazfit,
unpaired the watch from the Mi Fit App, then uninstall Mi Fit from your phone.
- Now you have only 'Notify & Fitness for Amazfit' app connected to your amazfit bip.
.- Go to setting section in the app, scroll down and you will find firmware update section, then update the amazfit firmware (you will find some option : english/spain/italian etc., i've choosen english version)
- There imare 3 items that you have to sequintly update one by one : firmware, recources and gps (i failed to update the gps, but all i know, it doesn't matter anyway...)
- After the update finished (sometimes it failed, but i repeat it on and on untill it's succeed), my amazfit starts to work proper and not displaying work out session anymore.
Notify & Fitness for Amazfit is my saviour!
It works better than the official Mi Fit app.
Blocked after Workout
I also had a blocked Amazfit Bip:
On my first workout (a 3 hour bicyle ride), I wanted to stop it. Unfortunately the watch always restarted the workout again.
First I thought that I had double tapped the screen after pressing the Ok (to finish) button. But I tried this for at least 30 times. It always restartet the workout.
I still got a connection from the Mi Fit App, but it told me that the watch is within a workout.
I disconnected / reconnected the MiFit App several times and somehow I was able to quit the Workout.
I immediately switched off the watch, restarted and everything was fine again. No new firmware flashing was required.
I only have it since two days.
[Firmware 0.1.0.26]

Motion alert - Amafit Pace

Hey, now I have Amazfit Pace, In the past I had MI Band - There was an option to get alert every hour with no movement (I work in the office and sometimes forget hours to move!). How can it be done on the Amazfit?
Thanks
http://forum.xda-developers.com/smartwatch/amazfit/app-step-notify
You can delete...

Real Time Display Sport Data during lock screen

To all Stratos users. Do you having this problem?
Why is that the real time display sport Data keep changing during lock mode?
I want to see the Lap Time, Lap Pace and Lap HR, but it only temporary and will change back to default value as soon as the screen was lock. So, I am wondering, what is the purpose of having this when it is clearly can not being display throught out the workout session. Funny isn't it?
No issues here using firmware 2.3.6.0 and Amazfit 2.6.3 from AppStore (tested with Treadmill). Choose what data you want to see and the order in Amazfit and it is displayed on watch after syncing, even when screen is locked. If you have problems, I suggest that you reset watch data: upair and pair again but do not restore old data to watch. If you still have problems, do the same but reinstall Amazfit after unpairing watch.
It's true. the problem has been resolved. I just have to reboot the watch, and the active screen will display the lap HR, Pace or cadence just the way i wanted.

amazfit pace - tracking delay for pace, altitude and speed data

Hi forum,
today my amazfit pace 2 (firm v2.8.3) has shown a delay issue. It took 10min, after my run started, to track altitude, pace and speed. Distance tracking seems ok. Is there any tip to debug it further?
thanks in advance.
Go to Settings -> General -> Activity alerts, turn both ON, quit settings, go back and turn them OFF again.
lfom said:
Go to Settings -> General -> Activity alerts, turn both ON, quit settings, go back and turn them OFF again.
Click to expand...
Click to collapse
thanks, lfom. However, I was not able to follow your suggestion (Settings -> General -> Activity alerts) in my amazfit pace (under its current firmware version). This option is not available to me. I've tried "Additional Setting -> General", and, below this, I have "Time format" and others.
I also tried swipe left -> Running-> Settings -> Activity Reminders (this path does lead to some alerts, e.g lap alert, heart rate alert and others)
Did you mean this second option? (I'm afraid we are talking about different versions or I've missed something in your explanation).
Thanks in advance.
thiago.manel said:
thanks, lfom. However, I was not able to follow your suggestion (Settings -> General -> Activity alerts) in my amazfit pace (under its current firmware version). This option is not available to me. I've tried "Additional Setting -> General", and, below this, I have "Time format" and others.
I also tried swipe left -> Running-> Settings -> Activity Reminders (this path does lead to some alerts, e.g lap alert, heart rate alert and others)
Did you mean this second option? (I'm afraid we are talking about different versions or I've missed something in your explanation).
Thanks in advance.
Click to expand...
Click to collapse
You must disable the "Activity reminders", not the alerts during the activity (they may cause other problems, but not the one you have reported). My Pace has latest CN firmware (AmazeROM - 2.6.5.0) and my Stratos with latest INTL firmware (2.3.9.0) show the option at the same place: Settings -> Genereal -> Activity alerts. Maybe it's different in the Pace INTL ROM. Anyway, you should enable both, save, then disable them again.
If you don't have the "Activity reminders", maybe what happened was just weak GPS signal. To avoid this, make sure you wait a few seconds after you get a GPX fix in a clear area, away from buildings and trees.

amazfit stratos finish point problem

Hello, I have a problem with my stratos and I would like to know if anybody else has this problem or how to fix it.
When I finish my run and then sync with phone and open the app to check my run the finish flag on the map is not on the proper spot but 2-3km sooner.
For example, I run about 15 km but on 12th km, it sets finish flag but it continues to count distance, pace and so on further. In the app, it shows proper distance and everything seems ok but when I look on the map finish flag is on 12th km.
It seems like no issue at all but after uploading on Strava it cuts off everything after the finish flag, so it shows only those 12kms and nothing else. And this bothers me because I use Strava as my primary app to analyze my runs. Interesting is that no matter how long I run it always cuts off more or less the same distance around 2-3 km before the real finish.
I appreciate any help.
Go to Settings on wacth -> Activity reminders, set both to ON, save, then set both to OFF again (you must reset them).
If watch is running firmware > 2.3.7.0 then there is a bug when GPS signal is lost that didn't happen in the past. You may want to factory reset but do NOT restore old data to watch to reset all data, do the above again (also reset Activity reminders), make sure you get a strong GPS-fix before starting to record any activity. And to get better HR data, enable continuous HR for at least 24h and use the watch while you sleep to record resting rate.
lfom said:
Go to Settings on wacth -> Activity reminders, set both to ON, save, then set both to OFF again (you must reset them).
If watch is running firmware > 2.3.7.0 then there is a bug when GPS signal is lost that didn't happen in the past. You may want to factory reset but do NOT restore old data to watch to reset all data, do the above again (also reset Activity reminders), make sure you get a strong GPS-fix before starting to record any activity. And to get better HR data, enable continuous HR for at least 24h and use the watch while you sleep to record resting rate.
Click to expand...
Click to collapse
Thanks for the reply.
I tried reset activity reminders but it did happen again. The watches are running on 2.3.9.0 and this problem first time occurred on 7th January. Is it possible that some update came out around that date?
About the GPS when I get a green screen which indicated good GPS lock and I start the activity it shows always altitude like -20000m and it takes some time until altitude becomes accurate but I always wait on the same spot till it's ok. Could that be a problem? Should I wait to start tracking even though GPS is ready?
After factory reset can I upgrade the watches to the current version or I should stay on some older one?
Reseting data will only erase the activity data stored on watch, it won't affect firmware. I'd suggest that you do the procedure above, and also turn off the watch for about 15s to reset sensors. And find start to record the activity as soon as you get a green GO, wait a few seconds for a stronger GPS fix.
Hello, I have the same exact problem on Amazfit Pace. It happens on Cycling and Walk and always cut the last 1-2 km of the track before the arrive regardless of the length of the ride.
I would try the suggested solutions but I can't find Activity reminders on Pace.
Archenan said:
Hello, I have the same exact problem on Amazfit Pace. It happens on Cycling and Walk and always cut the last 1-2 km of the track before the arrive regardless of the length of the ride.
I would try the suggested solutions but I can't find Activity reminders on Pace.
Click to expand...
Click to collapse
On the Stratos Activity Reminders are found under Settings > General. Not sure if it will be the same on the Pace.
raubbbyy said:
Hello, I have a problem with my stratos and I would like to know if anybody else has this problem or how to fix it.
When I finish my run and then sync with phone and open the app to check my run the finish flag on the map is not on the proper spot but 2-3km sooner.
For example, I run about 15 km but on 12th km, it sets finish flag but it continues to count distance, pace and so on further. In the app, it shows proper distance and everything seems ok but when I look on the map finish flag is on 12th km.
It seems like no issue at all but after uploading on Strava it cuts off everything after the finish flag, so it shows only those 12kms and nothing else. And this bothers me because I use Strava as my primary app to analyze my runs. Interesting is that no matter how long I run it always cuts off more or less the same distance around 2-3 km before the real finish.
I appreciate any help.
Click to expand...
Click to collapse
Amazfit ended up replacing my watch for this issue. None of the fixes they suggested worked. If they are hesitant to replace the watch, remind them of the Satisfaction Guarantee slip included in the package when you purchased the watch.
I have the same problem on my Amazfit pace... So annoying!
Has anyone found a fix?
d0d091 said:
I have the same problem on my Amazfit pace... So annoying!
Has anyone found a fix?
Click to expand...
Click to collapse
Hello, I have the same kind of problem.
My watch : Amazfit Pace 2.8.5.0
It happens only when the run is more than 15km
The finish flag is about 1.5 km to short.
The total distance is ok on Zepp App but it is not good in Strava.
1
Does anyone has a fix?
did you ever tryed a climb and see what the altitude map shows you?
I think my issue (https://forum.xda-developers.com/t/...os-3-2020-12-03.4033223/page-25#post-84231665) is because of that...
butcher33 said:
did you ever tryed a climb and see what the altitude map shows you?
I think my issue (https://forum.xda-developers.com/t/...os-3-2020-12-03.4033223/page-25#post-84231665) is because of that...
Click to expand...
Click to collapse
Hi.
First sorry for my english.
I have same issue. Zepp is the problem. GPX data from watch is ok. When it is updated to Zepp, data is ok.
But when you download the .gpx from Zepp (like Strava should), the latest data is missing in the .gpx
I opened a ticket at Amazfit but for them everything is fine.
In the screenshot below, we see on the left my watch's .gpx on the left and Zepp's .gpx on the right. There are 30 seconds of data missing.

Categories

Resources