Related
After flashing I9100XWKE7 XEUKD1 XXKE4 with Odin, after the reboot there was a message saying 'No access to .../csc/system...' or 'Can't access .../csc/system...'.
Phone booted successfully, firmware version upgraded but when I check with *#272*IMEI# - no CSCs are available at all. It only shows my current one.
Anyone else with the same problem?
http://forum.xda-developers.com/showthread.php?p=13730471
xtzz said:
After flashing I9100XWKE7 XEUKD1 XXKE4 with Odin, after the reboot there was a message saying 'No access to .../csc/system...' or 'Can't access .../csc/system...'.
Phone booted successfully, firmware version upgraded but when I check with *#272*IMEI# - no CSCs are available at all. It only shows my current one.
Anyone else with the same problem?
Click to expand...
Click to collapse
If you took the time to research you'd have seem that it's not a multi-CSC package but only contains XEU csc. This is not a problem, it's working correctly. If you want another CSC that flash a firmware package containing that CSC.
Thanks guys.
@Intreatech, no, XEU is okay for me, it's the one I actually want.
HHi, after 4 deep clean I still can not solve this problem, two weeks ago I installed a Multi-CSC, now I changed ROM, kernel and everything but every time I change ROM or go into Recovery Mode appears:
Code:
-- Copying media files...
Successfully copied meida files.
# MANUAL MODE #
-- Updating application...
Successfully updated application.
-- Applying Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/XEN/system/'.
Successfully applied multi-CSC.
How to solve?
Please! Thanks
If you have Root Explorer or similar, check the directory exists and that the permissions are correct?
Have you done a system and data format in recovery mode?Then re-flash your firmware and ROM.
I reflashed few times without success, I tried some ROM, I did some deep clean... The directory doesn't exist, I created it with correct permissions, when I'm going to flash a new ROM I have to redo everything because the problem always returns...
My phone isn't rooted now, so I don't have Root Explorer now.
The ROM is XWKJ3 original, with original kernel.
I just want to remove multi-csc! When I'm doing a factory reset it "Installing multi-csc" and "Successfully installed" now, I created this folder manually and everything is OK. I don't want multi-csc! But I can't remove it. I flashed Multi-CSC clicking on CSC and flashing a MultiCSC.
crik91 said:
I reflashed few times without success, I tried some ROM, I did some deep clean... The directory doesn't exist, I created it with correct permissions, when I'm going to flash a new ROM I have to redo everything because the problem always returns...
My phone isn't rooted now, so I don't have Root Explorer now.
The ROM is XWKJ3 original, with original kernel.
I just want to remove multi-csc! When I'm doing a factory reset it "Installing multi-csc" and "Successfully installed" now, I created this folder manually and everything is OK. I don't want multi-csc! But I can't remove it. I flashed Multi-CSC clicking on CSC and flashing a MultiCSC.
Click to expand...
Click to collapse
It might be a good idea to root again and boot to recovery and wipe cache partition,dalvik cache,battery stats and then format system,format data and then factory reset and reboot.You phone will get stuck on the galaxy boot animation so after a couple of minutes pull the battery put it back in,boot to download mode and flash your firmware you want.Give that a go.
Type into the phone dial: *#272*<your-phones-IMEI>#
Choose an available CSC from the upcomming list.
But note: this will perform a FULL WIPE and factory reset!
So backup your data before doing it.
cooza said:
It might be a good idea to root again and boot to recovery and wipe cache partition,dalvik cache,battery stats and then format system,format data and then factory reset and reboot.You phone will get stuck on the galaxy boot animation so after a couple of minutes pull the battery put it back in,boot to download mode and flash your firmware you want.Give that a go.
Click to expand...
Click to collapse
Thank you. I'm going to try it tomorrow..
Sent from my GT-I9100 using XDA App
crik91 said:
Thank you. I'm going to try it tomorrow..
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
mate, have you solved your problem? how? please tell me more details, thank you so much...
ehe12 said:
mate, have you solved your problem? how? please tell me more details, thank you so much...
Click to expand...
Click to collapse
No, because is not a problem. IMHO it's normal when the ROM's CSC is not the native CSC of your phone.
crik91 said:
No, because is not a problem. IMHO it's normal when the ROM's CSC is not the native CSC of your phone.
Click to expand...
Click to collapse
But CSC is interchangable and a phone does not need CSC to work in othwer words their are no native CSCs .
You could remove all CSC files and folder from the phone via root explorer and copy a new set back .
Clean phone method solves 99% of problems .
As posted already Recovery Mounts and Storage Format Data Cache System SD card if you want but that wipes SD card .
Empty phone will not boot remove battery
Replace battery boot to download mode flash stock rom via Odin .
jje
I've just tried different solutions for days and days without change. I restored the original ROM, all original, DEEP CLEAN, no change.
crik91 said:
No, because is not a problem. IMHO it's normal when the ROM's CSC is not the native CSC of your phone.
Click to expand...
Click to collapse
could you explain in more detail? I'm having problem with this CSC, it won't recognize my Orange sim card, previously it was working fine. Now all other networks' sim cards work on my phone, only orange won't...I'm thinking it's something to do with CSC...
Sorry, I'm not an expert in this field and I'm not very good in english. Try to search HOWTOs to do a DEEP CLEAN f your phone.
ehe12 said:
could you explain in more detail? I'm having problem with this CSC, it won't recognize my Orange sim card, previously it was working fine. Now all other networks' sim cards work on my phone, only orange won't...I'm thinking it's something to do with CSC...
Click to expand...
Click to collapse
If CSC does not have a networks settings then you just enter the APN settings manually .
CSC is just a list of networks with the settings for each .
<CSCEdition>ED003</CSCEdition> <Country>UK</Country> <SalesCode>O2U</SalesCode> <NbNetworkInfo>2</NbNetworkInfo> -<NetworkInfo> <MCCMNC>23410</MCCMNC> <NetworkName>O2 UK Pay Monthly</NetworkName> </NetworkInfo> -<NetworkInfo> <MCCMNC>23410</MCCMNC
My Quattro was previously running on cosmic Rom with philz recovery img but now I switched back to stock Rom but the bootloader is still show the build number different in the bootloader because of which software update download but doesn't install. Pls help me
Aditya78 said:
My Quattro was previously running on cosmic Rom with philz recovery img but now I switched back to stock Rom but the bootloader is still show the build number different in the bootloader because of which software update download but doesn't install. Pls help me
Click to expand...
Click to collapse
did you use odin for flashing stock? flash stock firmware
Yes I did switched to stock Rom through Odin and the phone is working but software update downloads but when the time comes for installation it goes into bootmode and says installation aborted. Could you pls tell me that if I am using a custom Rom that is installed by philz recovery "install zip from ext card " then how to switch back to stock Rom using Odin.
Aditya78 said:
Yes I did switched to stock Rom through Odin and the phone is working but software update downloads but when the time comes for installation it goes into bootmode and says installation aborted. Could you pls tell me that if I am using a custom Rom that is installed by philz recovery "install zip from ext card " then how to switch back to stock Rom using Odin.
Click to expand...
Click to collapse
Update via kies looks like update.zip was corrupted
Hi everybody,
Yesterday I decided I wanted to root my S6 Edge phone (SM-G925F, International Version) and flash a custom ROM onto it. I managed to root it successfully and install a working version of TWRP.
I began installing the XtreStoLite Custom ROM onto my S6 Edge. Around the 10% mark of installation, my phone suddenly booted. I read online that I should boot back normally and install an app which reduces my CPU power or something like that, can't really remember. But when I tried to boot back normally, it was stuck in a boot loop with only the Samsung S6 Edge logo appearing.
During installing TWRP I bricked my phone a couple of times because I installed wrong versions of TWRP. I flashed a stock firmware a few times to get rid of the brick (a similar bootloop), which worked every time like a charm.So I figured that with this "Custom ROM bootloop", I can just flash the stock firmware, boot everything back and try again. But after flashing the previously so glamorously working stock FW, I was stuck in a bootloop way worse than before.
This time the phone starts, I get the S6 edge logo, I get a "installing software update" screen for about a millisecond and then a "no command" screen. After the latter, it repeats. Once repeated for - I don't know - a 1000 times, it boots into stock recovery.
I tried factory resetting, which only gets rid of "software update" and "no command" screens. The bootloop stays.
What do you suggest I do? Can I do anything? Could it possibly work with 'another' stock firmware file?
Thanks in advance :good:
Probably you end up with dm verify verification error, drk issue, try to flash back stock firmware using repartition and a pit file to see if will fix your issue
Thanks for the quick reply mate. Just to get this right, I don't want to mess anything else up: first, I download a new firmware from lets say, SamMobile. When flashing with Odin, I check the box re-partition. What do I do with the pit file? If I download the FW from SamMobile, I'm supposed to get a CSC file right? With the pit file inside of it? Will Odin recognize it just like that (from the CSC file)?
you must download pit file and add in pit file, depending on your csc code of firmware you want to flash search that pit file on google
Okay, thanks. I googled and found this website: droidviews.com/download-pit-files-for-galaxy-s6-edge-all-models/
You figure I could just use a pit file downloaded from there? Or should I worry about 32GB / 64 GB pit files?
Also found this website: sammobile.com/forum/showthread.php?t=30136
It has an "SM-G925F OXA multi CSC ( BTU CPW DBT ITV KOR NEE XEF XEO XEU )" pit file. My S6 Edge is NEE region marked. Is this any better than the 'droidviews' one? Is it possible to tell or are they one and the same?
jalle65 said:
Also found this website: sammobile.com/forum/showthread.php?t=30136
It has an "SM-G925F OXA multi CSC ( BTU CPW DBT ITV KOR NEE XEF XEO XEU )" pit file. My S6 Edge is NEE region marked. Is this any better than the 'droidviews' one? Is it possible to tell or are they one and the same?
Click to expand...
Click to collapse
You need this firmware
http://updato.com/firmware-archive-select-model?record=85560321743B11E7963AFA163EE8F90B
And this pit file
https://mega.nz/#!rERH1LqK!QSYjirrXtPjKc1giOahnZI0BrWR2WXMg0GI3ZR3LLeY
Or just try to flash your original firmware
Ok so, I flashed the FW callumbr1 suggested, with the required pit file. Something happened! The phone now boots from the S6 Edge screen all the way to the next screen, the one with 'Samsung' text on it. The logo keeps flashing, with it never going away. So still in bootloop, but a little different one.
What now? Thanks for all of the advice thus far!
Its working! Oh thank each and every God, but most of all you guys.
So the phone was stuck in the Samsung boot logo. I booted into recovery, wiped cache, no result. 2nd try, I boot to recovery, do a factory reset, and it SEEMED like it was still in boot loop, with the logo flashing. I went to take a leak and my God, that leak turned out to be a leak of faith. I came back and the phone had booted. Now it seems to work normally.
Thank you so much!
jalle65 said:
Its working! Oh thank each and every God, but most of all you guys.
So the phone was stuck in the Samsung boot logo. I booted into recovery, wiped cache, no result. 2nd try, I boot to recovery, do a factory reset, and it SEEMED like it was still in boot loop, with the logo flashing. I went to take a leak and my God, that leak turned out to be a leak of faith. I came back and the phone had booted. Now it seems to work normally.
Thank you so much!
Click to expand...
Click to collapse
It's because the glowing Samsung logo is not actually a bootloop.
It's just on that logo while the phone builds the firmware. Usually takes about 10-20 minutes on that logo screen. Glad I could help and it's all working :good: thanks the posts if you can
Is your s6 edge bootloader unlocked? If so, how?
I am unable to load TWRP as my bootloader is locked, and can't find a solution anywhere. Any pointers?
callumbr1 said:
You need this firmware
http://updato.com/firmware-archive-select-model?record=85560321743B11E7963AFA163EE8F90B
And this pit file
https://mega.nz/#!rERH1LqK!QSYjirrXtPjKc1giOahnZI0BrWR2WXMg0GI3ZR3LLeY
Or just try to flash your original firmware
Click to expand...
Click to collapse
I'm in the exact same situation as the OP,with the exception that i cant even get to recovery
(I got the phone in that situation tbh so i dunno what happened)
I tried to flash the firmware and the pit file you provided but i got a cm.img error and binary error device 5 binary 4.
So i guess device had newer os installed.
I'm now trying to download(those sammob speed limits ) the newest btu file my question is the pit file you provided is for every btu firmware or do i need another one?
razenxd said:
I'm in the exact same situation as the OP,with the exception that i cant even get to recovery
(I got the phone in that situation tbh so i dunno what happened)
I tried to flash the firmware and the pit file you provided but i got a cm.img error and binary error device 5 binary 4.
So i guess device had newer os installed.
I'm now trying to download(those sammob speed limits ) the newest btu file my question is the pit file you provided is for every btu firmware or do i need another one?
Click to expand...
Click to collapse
Yes try the latest firmware.
The pit file will work for every btu firmware aslong as you have G925F. If it fails quote me and I'll try to help further
callumbr1 said:
Yes try the latest firmware.
The pit file will work for every btu firmware aslong as you have G925F. If it fails quote me and I'll try to help further
Click to expand...
Click to collapse
I've downloaded the latest BTU firmware with samfirm and flashed it along with the pit file
Again i got the updating screen which was already on 25% jumped to 32% and then got to erasing screen in which the refreshing icon froze.
I'm waiting for it to make something but nope.
razenxd said:
I've downloaded the latest BTU firmware with samfirm and flashed it along with the pit file
Again i got the updating screen which was already on 25% jumped to 32% and then got to erasing screen in which the refreshing icon froze.
I'm waiting for it to make something but nope.
Click to expand...
Click to collapse
See if you can manually boot to recovery. If so then wipe data and cache and reboot
callumbr1 said:
See if you can manually boot to recovery. If so then wipe data and cache and reboot
Click to expand...
Click to collapse
i can't.
It passes in some milisecs the updating screen and gettting me to the no command screen.
razenxd said:
i can't.
It passes in some milisecs the updating screen and gettting me to the no command screen.
Click to expand...
Click to collapse
Hold down and power until it completely reboots. As soon as it goes off switch to recovery combo and keep holding
callumbr1 said:
Hold down and power until it completely reboots. As soon as it goes off switch to recovery combo and keep holding
Click to expand...
Click to collapse
That's what i do, and i get what i said in the previous post
Now will try and give a flash the 4 file btu repair firmware which i downloaded from samfirm app along with the
ZEROLTE_EUR_OPEN.pit
Should i also check repartition and nand erase all in odin?
razenxd said:
That's what i do, and i get what i said in the previous post
Now will try and give a flash the 4 file btu repair firmware which i downloaded from samfirm app along with the
ZEROLTE_EUR_OPEN.pit
Should i also check repartition and nand erase all in odin?
Click to expand...
Click to collapse
Only check repartition if you flash a pit file. Don't select nand erase
callumbr1 said:
Only check repartition if you flash a pit file. Don't select nand erase
Click to expand...
Click to collapse
That's what i did.
Fingers crossed
Edit: Now stucked in galaxy s6 edge screen before samsung logo.
Edit 2 : Tried to access recovery, phone got again in system update screen and then stuck on erasing
rebooted then tried to access recovery again and got the no command screen again.
Edit 3 : After several attempts to access recovery it got me to the black screen before the wipe options of recovery appeared and phone hang up.
It has the following
No Support SINGLE-SKU
Supported API: 3
#MANUAL MODE v1.0.0#
Appling Multi-CSC
Applied The CSC Code :XEO
Succesfully applied multi-csc
Hum, just noticed in download mode that the device has on the reactivation lock.
Could that be one problem that i face?
Hi everyone,i am asking for your help i am noob at this. So i wanted to install a custom rom on my s9+ (Pixle Expirience),after using the rom i installed a random android pie kernel,then the rom woudnt boot.So i installed a normal custom rom that i knew it worked.I flash that but i didint have mobile data and i coudnt see my IMEI and my flight mode was plain blue instead of gray(but my wifi worked like everything elese).Then i installed stock firmware via odin,still nothing.
Then i panic and found some software which with u can insert your IMEI,but i have accidentally wiped my efs.So now when i install firmware it is stuck at samsung logo,and in TWRP it says failed to mount /efs Invalid argument.So i ask u if u can guide me on what to do and how to get efs file.Your help is appreciated.Thank you
Did you wipe the date with the csc file while flashing your firmware with odin?
danlivesey said:
Did you wipe the date with the csc file while flashing your firmware with odin?
Click to expand...
Click to collapse
Same problem with me phone works but network issue