When i try to unlock(lockscreen) my phone, it doesnt react, no matter what I press.
After pressing and taping on the phone( 4 to 6 seconds) , It finally unlock the screen. After that I am able to unlock the phone
Any suggestions
Corrupted SD card casued the problem, all solved.
Related
Hello guys, I'll try to be as brieff as possible:
My cousin has a SGS3, which suddenly started showing the power options screen (when you long press power button). Now his phone restarts on its own every time. When you insert the battery, it turns on by itself. If you try to access download mode or recovery mode, it does it but restarts again. I read it may be the power button is not working properly, but I dissassembled the phone and the switch is works normally (it's not broken, either stuck). I read several solutions about clearing cache and stuff, but it just keeps restarting! Like if someone were pushing the powerbutton every time. Btw, he discovered he can turn the phone on and actually stop the phone from restarting if he continously presses the power button and menu button alternatively without stopping (which is useless). When he stops doing that, 3 secs later, it restarts again. Any suggestions?
It's a hardware fault, did you test the button with a meter?
If yes then something else is shorted, to power on when the battery is inserted.
Sent from my GT-I9300 using Tapatalk
Ah, so this is merely hardware. I did not test it, but now it seems clear something is wrong on the inside (which, unfortunately, I cannot help with). Thanks mate!
Guys , please help me...
The problem is that my power button has become way to sensitive and registers even the slightest pressure on it.
This causes the phone to lock up while using..
BUT THE REAL PROBLEM IS --> This causes the phone to reboot as the kay gets stuck in the pressed position ( long press of power button reboots the phone R8 ? )
please help me...
If you can suggest me how to disable the long press to reboot it would be really helpful..
even if you can point me as to which files are to be modified to reroute the function , I would get into it..
You cant disable it, it's done in hardware. The phone will reboot always if you keep pressed the power button, no matter if you are on recovery, download mode or normal mode.
The button must be replaced. Or you can try doing something like massage to the button by quickly pressing it hundreds of times with the battery off, for around 5-10 minutes, maybe it cleans the contacts a bit and the problem is solved.
You'll end tired, but luckly with a working phone. Or go to a repairing shop and tell them to replace the button.
Mine is also failing, for now it keeps going by pressing a lot of times when it fails, after a week or so it fails again. I'll replace it soon, no problem because I work repairing phones, it's not a hard or dangeours repair
Hello everyone
I replaced my lcd and digitizer because the touch did not working on the original screen of K3 note
I have the following problems
The screen works and touch also when i power up the device but when i lock the screen from power button the screen 8/10 times never turn on and i can see only the backlight, if i press multiple times the power button it will turn on finally but i never know when it will. If i remove the battery and turn it on again , everything works fine until i lock the phone. The phone works when it is locked by the way. Also if i press the power button to unlock the touch works but i can see only the back light no image.
I tried to lock and unlock the screen with gestures , same problem.
The weird think is that sometimes it turns on.
One think i forgot to mention is that sometimes when the screen turn on after pressing the power button i see black horizontal lines for some seconts(flickering) and then they dissapear
I tried a lot of different roms, i disconnected and connected again, never sleep mode with safe locker , i disabled the proximity sensor with x posed , i removed the sd card, nothing helped.
Can anyone suggest me something else to do?
Changing screen settings maybe? and how
Thanks a lot and sorry for my engish it is not my native language.
I've just dropped my RN4 and the screen stopped to work (black screen with no backlight) but I could tell that the touch was working well as I've managed to pick up a call. I wanted to remove the SIM card from the tray so I turned the device off by pressing power button for approx. 15s. Then I wanted to back my data up and boot the device to transfer data to the PC however I was unable to - when I've tried to press the power button to turn it on, device vibrated once and is doing so repeatedly from then on (the cycle is: vibration - 10 s pause - vibration-.... you get it). After plugging it into PC it is discovered as unknown device only. Is it matter of broken screen only or some more serious problem?
Hi everyone,
I have an odd issue with my tablet. Suddenly the touchscreen becomes glitchy.
This situation just started without any reason.
The touchscreen not responding. Can not swipe to unlock. I need to press the power button 10 - 15 times until I can swipe and unlock it. The tablet will work as normal while you using it. You can turn it off, restart will work as normal. But if you leave your tablet unused for 30 min or longer you can not swipe to unlock it again. I need to press the power button 10 - 15 times again until I can swipe to unlock it again.
I did restart, factory reset, and updated the system, but nothing helped.
Does anybody have any ideas?
I would contact Samsung, might have to send it to them.