I found this master list of cases that work and do not work with the whitestone dome glass on Reddit. I thought it would be helpful for those here as well! There seems to be a submission form for other cases that people have tested out and whether or not they fit, so it is continually updated.
Hope this helps others as it really stinks to spend so much on that screen protector only to have a case screw it up because it doesn't fit
mod edit - affiliate links list removed
I believe something isn't right. Spigen Slim Armor does not fit with Dome Glass but Tough Armor which is bigger fits... Can someone confirm?
DJ SNap said:
I believe something isn't right. Spigen Slim Armor does not fit with Dome Glass but Tough Armor which is bigger fits... Can someone confirm?
Click to expand...
Click to collapse
Both of those cases are similar in design but the actual edges are different and the slim armor touches the glass, so it doesn't fit. It is indeed confirmed.
ThatGuitarGuy said:
Both of those cases are similar in design but the actual edges are different and the slim armor touches the glass, so it doesn't fit. It is indeed confirmed.
Click to expand...
Click to collapse
Well, I now have Slim Armor and Dome Glass. It fits perfectly so I would like to recommend change on the list
Related
I recently got my note 3 and need to protect it properly. I got the iloom flexible glass screen protector and have been looking at a few options for a case:
- samsung original flip wallet (expensive!)
- spinge neo hybrid case - which i think i prefer for being sober, slim and seems sturdy
- Feel free to suggest a nice quality case - slim, non obtrusive.
But i have a doubt if the spinge case wont damage the screen protector on the edges. Saw a review of the neo hybrid (i think its the one on the spinge website) and the reviewer's note3 had that screen protector problem, a little damage on the edges because of the case - it lifts the screen protector a bit.
Do any of you have any problems like these with the neo hybrid? I assume it all depends on the screen cover, on how much surface it covers and if it gets tucked below the cover.
Anyway, please feel free to give me your feedback and opinions. They are very welcome.
Thanks
I have the Spigen bounce. Love it. The neo hybrid is nice but the outer plastic can crack if it hits the corner when it falls.
mikemq2003 said:
I have the Spigen bounce. Love it. The neo hybrid is nice but the outer plastic can crack if it hits the corner when it falls.
Click to expand...
Click to collapse
Seems very nice also. I somehow missed it when i was browsing the cases. And do you have a screen protector? Does the case mess with the screen protector?
I do. I have a tempered glass protector with the spigen bounce. No problems with it. It won't mess with film protectors either. This is the case with my protector. Page 64 closer towards the bottom of page.
http://forum.xda-developers.com/showthread.php?t=2441894
Great feedback. Thank you guys. I just ordered my spigen bounce case from amazon and cant wait for it to get here.
Again, thanks for everything.
manifesto42 said:
Great feedback. Thank you guys. I just ordered my spigen bounce case from amazon and cant wait for it to get here.
Again, thanks for everything.
Click to expand...
Click to collapse
Awesome! Enjoy your case. You will love it.
Otterbox defender, punched out the plastic screen protector and installed a mime feather tempered glass screen protector. Doesn't get any better... In my opinion.
Sent from my NOT3
http://www.amazon.com/Caseology-Sam...d=1386577863&sr=8-1&keywords=caseology+note+3
i have the iloome flex screen protector as well with the case above. Fits PERFECTLY! looks good too.
Has anyone had better luck than I at finding a case and screen protector, preferably one with a matte finish, that work well together on the S7 (non-edge)? I generally use Spigen cases as they are slim and slightly wrap around the front of the phone. However, this caused my first two screen protectors (both plastic) to bubble up around the edges and eventually peel off. The best was the Skinomi but it only lasted a few weeks longer than the first one I tried.
From reviewing most threads it looks like most people have either went the route of either a) skin + screen protectors or b) case + no screen protectors on their S7 due to slightly curved nature of the screen. But being as it's now September, I was hoping there would have been some better options to fully protect the phone. I'm hoping to hear if anyone has found a good combo.
Thanks in advance.
-J
Has anyone found any matte screen protector that works with ANY s7 case?
No luck? I just put a Spigen Neo-Hybrid and immediately the BSE cover bubbled up.
The Tech21 matte screen protector works with my Tech21 cases, which have quite a lip, so I assume it'll fit other rugged cases too.
Sent from my SM-G930F using Tapatalk
iridaki said:
The Tech21 matte screen protector works with my Tech21 cases, which have quite a lip, so I assume it'll fit other rugged cases too.
Click to expand...
Click to collapse
I use the tech 21 matte impact shield with a tech 21 impact tactical case. Really nice combo that work well together, but far from cheap!
I use goospery with screen protector and no problems
iridaki said:
The Tech21 matte screen protector works with my Tech21 cases, which have quite a lip, so I assume it'll fit other rugged cases too.
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
Wow $35! Not something to just try out.
robotapocalypse said:
Wow $35! Not something to just try out.
Click to expand...
Click to collapse
I paid £16 for mine here in the UK off ebay. They are very pricey but I am very happy with it. The anti glare makes such a huge difference. Equally it does feel like it will last.
The tactical case I got seems very rare to source here in the UK as well from anywhere other than tech 21. Ended up paying £30 for that!
In the kitchen bro
Hello guys,
I am still doing my search for an ultra-thin case with mate finish for my S8. It is something like the Peel cases for iPhone (sadly they don't care about Samsung phones).
There are some thin cases but I often don't like their glossy finish or the case is not well built.
If anyone knows a case like the Peel, please let me know
AirSupply said:
Hello guys,
I am still doing my search for an ultra-thin case with mate finish for my S8. It is something like the Peel cases for iPhone (sadly they don't care about Samsung phones).
There are some thin cases but I often don't like their glossy finish or the case is not well built.
If anyone knows a case like the Peel, please let me know
Click to expand...
Click to collapse
I'm using this one from Amazon and very happy with it - only scratch protection, but that's what I was looking for - https://www.amazon.com/gp/product/B06XHFYJM7
I just purchased this one. Waiting for it to come in Wednesday. I can post some pictures once I have it.
https://www.amazon.com/gp/product/B06XGQM76L/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
ddenson said:
I'm using this one from Amazon and very happy with it - only scratch protection, but that's what I was looking for - https://www.amazon.com/gp/product/B06XHFYJM7
Click to expand...
Click to collapse
This looks like what I wants. I ordered the blue one but wished that they made the white/mate version as welll
I'm using spigen thin fit. Matte black and has some grip.
konman795 said:
I just purchased this one. Waiting for it to come in Wednesday. I can post some pictures once I have it.
https://www.amazon.com/gp/product/B06XGQM76L/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
This looks closest to peel/Cali case I always use, will be purchasing this for myself , got the wife a Spigen liquid armor she needs a bit more protection
Received the elago case today in black. Cut outs are exact and fit is good, seems to be a bit of movement along the edges.
Perfect for scratch protection and a screen protector should work great with the elago.
Sent from my SM-G955U using Tapatalk
Spigen AirSkin
https://www.spigen.com/products/galaxy-s8-case-air-skin?variant=30613364033
Shuthefrontdoor said:
This looks closest to peel/Cali case I always use, will be purchasing this for myself , got the wife a Spigen liquid armor she needs a bit more protection
Click to expand...
Click to collapse
This is CaliCase. They changed their name.
Get the elago case from Amazon. It's sooooooooooooo slim! It's .3 I believe and leaves you the flush look of the phone. Just need a decent screen protector now lol
https://www.aliexpress.com/item/CAF...32749572685.html?spm=2114.13010608.0.0.cmWG3X
bought this. dirt cheap and very slim
@guaneet Elago case is not available as transparent case?
Tatsch said:
@guaneet Elago case is not available as transparent case?
Click to expand...
Click to collapse
Nope - the one negative for me. If it was, it would be perfect, but otherwise it's great
Spigen AirSkin is the best quality and closest you'll get to Peel or Caudabe.
+1 for Spigen Airskin. It is .36mm and the peel is .35mm. It is *very* thin, bordering on scratch-only protection.
Are you guys speaking from experience on the S8? The Spigen air skin doesn't fit my S8 for some reason, it's just a tad bit too narrow. Spigen was nice enough to replace it, but the new one is the same.
MNML fits perfectly and is the same ultra thin type case. It's my vote for the S8. The other benefit to the MNML case over the Spigen is, the bottom is covered on the MNML, while on the Spigen it's exposed.
I have the Spigen Air Skin on an S8 now and it fits perfectly. The bottom is exposed (except the corners) and the back cutout looks to be different (one big cutout) than the MNML (3 separate cutouts). Face down, it still sits without the front glass touching.
The Nillkin brand of cases out of china are good quality. I've owned a few version of their cases for different models of phone. If you want the slimist case that is TPU and gives some slight shock protection over not having a case, the NATURE line is awesome. I just ordered my clear S8 case from Amazon. can't go wrong with this case. I will update once it arrives.
Also, thing of note...this case has a separator for the camera and fingerprint reader. This actually helps out and functional to keep me from placing my finger on the camera. My current case has the same design as this was a feature I was looking for. Most of the cases has a large cutout on the back which I think was the cheap/fast way to release a case.
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=&id=6851&page=1
I just got this case from Amazon.
Exactly what I was looking for.
Very slim, no branding, matte black.
Maxboost Galaxy S8 Plus Case mSnap [Perfect Fit] [Black] Samsung Galaxy S8+ / S8 Plus Case Anti-Slip https://www.amazon.com/dp/B06XS66SFG/ref=cm_sw_r_cp_apa_HKhbzb4MBPSPX
I got mine from a company called Bare Cases. Think they're a small company but the case felt very premium. Has a matte finishing. So far it's scratched at the back but I don't mind it cos I guess it protects my phone from those exact scratches.
The Spigen air skin didn't fit good and I just gave up with that.
I'm not sure if I'm just having issues with the case, but my whitestone dome glass keeps lifting on the corners. Does anyone have this screen protector and a good compatible case?
Been considering the whitestone dome screen protector or the upcoming rhinoshield plastic one, mind if I ask what case you're using that is causing it to lift?
Waiting official LED samsung cover to test with... hope it will fit
getting some tg lifting issue when using the unicorn bettle pro.
rhinoshield solidsuit works just fine with wsd
Sent from my LG-H930 using Tapatalk
I'm using Dome Glass with no issue with the dbrand. I can also tell you the UAG and Spingen Tough Armor also work fine with Domeglass.
I like the "tear down" skin you can get with the case. dbrand is not cheap. I think I paid 44 for the case and the skin. They have a nice micro fiber interior to protect the glass back.
Just for anyone wondering, the protector that I was using that caused lifting was the Spigen clear ultra hybrid. After about a day, the corners lifted, and any button presses cause screen lifting. We swapped it for a spigen liquid crystal and so far it's not as bad.
I'm using the Otterbox defender with no issues
Sent from my SM-G988B using Tapatalk
i have the official clear view cover for my s20 +, works fine with the dome glass
One vote here for Spiegen Tough Armor
I love this case, cause it's tough. Like armor.
No lifting of the whitestone dome glass (well, my first placement did result in lifting but i messed up , had it too far toward the bottom. 2nd try was perfect).
I also didn't have a problem with the Samsung LED cover or the Samsung flip-open cover with the clear section running down the right
And, I'd just like to add, that the fingerprint detection is SOOO much better than my prior Galaxy note 10+. Thank you thank you thank you Samsung.
I love this S20+. (I had an Ultra but turned it in cause it was just a little too big. This one fits my mitts well).
Cheers XDA! Keep up the great site!!!
Samsung Led Cover [emoji846]
Spigen Slim Armor
Just got the Spigen Slim Armor case. It fits perfectly and feels great on the hand. There is no problem with the Whitestone dome glass that I installed a few days ago.
I had similar issue with my S10+ so this time I went screen protector free. With Assurion, if I break my screen is $30 the screen replaced, they even come to my house to do it so to me, it was a no brainier
San Diego said:
I love this S20+. (I had an Ultra but turned it in cause it was just a little too big. This one fits my mitts well).
Cheers XDA! Keep up the great site!!!
Click to expand...
Click to collapse
+1 with this comment.
Sent from my SM-G986U1 using Tapatalk
Anyone using Whitestone with Spigen Liquid Air?
Still following this and hoping there's more feedback. Just installed Dome on mine and my wife's and I'm not sure any cases we have will work without pulling up the glass. The test begins tomorrow!
Case test 1 and 2 - Scnail Titan works well. No issues. Schnail Savior lifted the very top lip of the glass on my wife's.
Samsung silicone case (for regular s20) also fits well.
https://www.amazon.com/CYRILL-Color-Designed-Samsung-Galaxy/dp/B0832B3DH1
This is Spigen's alt-brand. I have it in green and blue, definitely my favorite cases out right now. Works perfectly with the Whitestone glass.
UAG Monarch fits perfectly. My favorite case this far. Wife just got a Snakehive leather case that is awesome too and works well with the Dome.
---------- Post added at 04:48 AM ---------- Previous post was at 04:41 AM ----------
[/COLOR]
Digibeginner said:
Just got the Spigen Slim Armor case. It fits perfectly and feels great on the hand. There is no problem with the Whitestone dome glass that I installed a few days ago.
Click to expand...
Click to collapse
I have the slim armor case. Is it still working well with the Whitestone glass? Trying to be sure before I make the investment.
Received my new Armadillotek Vanguard case for my S20+ today. Already was using a Samsung Rugged Protective Case but wanted more protection when out and about and I had recently returned a Supcase Unicorn Beetle Pro case due to it's incompatibility with the Whitestone Dome Glass Protector. The inner frame of the Supcase pressed on the lower right corner of my old glass protector causing it to lift and detach from the phone.
The case came in good packaging with a yellow thank you card and support information which was a nice touch. The case itself has roughly the same dimensions as the Supcase. As I initially test-fitted the case I was VERY PLEASED to find out that the frame did not touch or push on the WD glass protector (unlike the Supcase) and there was clearance all-around. The frame is then inserted into the tpu/plastic cover and the fit is perfect. The kickstand is different that the Supcase as it lifts out from the end as opposed to from the middle but it works just as well and appears sturdy. The plastic back has a very deep rear camera cutout so am not worried if it happens to drop on the ground. Side and front protection is on par with other rugged cases like the Supcases and with the glass protector it allows for good protection.
All in all, it appears to be a very protective case that was perfect for my needs: 1) good protection; 2) kickstand; and 3) Whitestone Dome Glass compatibility. Sounds like a keeper!
No pics?
GeoFX said:
Received my new Armadillotek Vanguard case for my S20+ today. Already was using a Samsung Rugged Protective Case but wanted more protection when out and about and I had recently returned a Supcase Unicorn Beetle Pro case due to it's incompatibility with the Whitestone Dome Glass Protector. The inner frame of the Supcase pressed on the lower right corner of my old glass protector causing it to lift and detach from the phone.
The case came in good packaging with a yellow thank you card and support information which was a nice touch. The case itself has roughly the same dimensions as the Supcase. As I initially test-fitted the case I was VERY PLEASED to find out that the frame did not touch or push on the WD glass protector (unlike the Supcase) and there was clearance all-around. The frame is then inserted into the tpu/plastic cover and the fit is perfect. The kickstand is different that the Supcase as it lifts out from the end as opposed to from the middle but it works just as well and appears sturdy. The plastic back has a very deep rear camera cutout so am not worried if it happens to drop on the ground. Side and front protection is on par with other rugged cases like the Supcases and with the glass protector it allows for good protection.
All in all, it appears to be a very protective case that was perfect for my needs: 1) good protection; 2) kickstand; and 3) Whitestone Dome Glass compatibility. Sounds like a keeper!
Click to expand...
Click to collapse
You gotta show us the photo and link, mate
halifaxcrosby said:
You gotta show us the photo and link, mate
Click to expand...
Click to collapse
You could search it on Amazon, bruh
Amazon.com
What a great response to "actually put up a real life review with pictures"...
"search it on amazon", the "bruh" just makes it out like he's 12.
montrealbagel said:
You could search it on Amazon, bruh
Amazon.com
Click to expand...
Click to collapse
Don't be an idiot.
@GeoFX
That case looks downright scary.