My S9+ is locked and it says Encryption Failed. i never set that up so i didnt know the password. i did factory reset still says Encryption Failed, i aslo flashed it on odin and yet still says Encryption Failed.
I dont know what else to do to fix it.
Help please
https://www.androidcentral.com/factory-reset-protection-what-you-need-know
Emadze said:
My S9+ is locked and it says Encryption Failed. i never set that up so i didnt know the password. i did factory reset still says Encryption Failed, i aslo flashed it on odin and yet still says Encryption Failed.
I dont know what else to do to fix it.
Help please
Click to expand...
Click to collapse
Same here :crying: happened after a Samsung update
Had the same after update. Contacted Samsung (UK),and despite phone being brought through a private seller on Ebay, they are sending a courier with brand new phone to swap for 'Encryption Failed' one.
24 hours after I contacted them through Twitter.
To say I'm surprised is an understatement!
Related
hello classmates, I have a problem with my motorcycle z, it happens that I can not enter the system, and in fastboot I see a legend "failed to load kernel", I tried to install twrp but I have not been successful, I tried to install a rom and neither It worked for me, I did downgrade and neither did anyone have an idea of what I can do? I also get a message "start up failed! your device did not start up succesfully, use the software repair assistant on computer to repair device", sincerely I have not had a rooted device for a long time, I just acquired it yesterday and the seller did not tell me about it, I do not know what to do, also, sorry for my bad english
Give it back and get your cash back.
Since the seller didn't tell you the defect, he has to take it back.
So, this is my first ever thread, please dont judge me my english's not so well.
So let me tell ya' all what happened.
My cousin gave me his S8 (G950FD) and told me he got locked out of his phone with google verification. He forgot email and pass to his google account. So i looked for every way possible to bypass it, and i had only one option i.e. to go for odin firmware installation. So i grabbed all files and started. Odin showed fail. All the files were correctly selected and check marks were okay too, so i saw that on phone in downloading mode, it showed sm kinda error related to bootloader, so i removed the BL file and rest of the firmware got installed. And then when the phone started, it showed error under installing updates and went to recovery mode. I tried everything there, from factory reset to data chache reset, NOTHING is Working. I even tried my best to install a BL on phone but nothing worked. I tried the trick of closing downloading mode and going back, that didnt work. I tried patched versions of odin, that also didnt work. So I GAVE UP AND CAME HERE. Can any1 plz help me wd this? I cant install the BL and the phone is in recovery mode forever!
P.s: i tried smart switch and kies ERT and it didnt work either.
Hi , if you are unable to put your phone into Download mode , dry out your battery completely to 0% also probably you are usingwrong firmware version for diferent region .
Try to flash this Combinated firmware , if it fails send me 7 and 8 number from imei .
https://drive.google.com/uc?id=0ByX_bKWufhpieGpUOTV5aG1xbGM&export=download
Hi, I tried a few days ago to get help in General but my problem might fit better here.
I use a galaxy s7 with SupermanRom and TWRP I installed 1.5 year ago (updated it a few times but it wasn't up to date now).
A few days ago I got the error message "custom binary blocked by frp lock" after rebooting . I think I unchecked OEM by mistake recently, not sure.
So I used odin to install a stock firmware from Sammobile. I took the most recent one (8.0, my phone was 7.0 I think though). I used HOME_CSC to keep my data.
Odin task succedeed but I got the "No command" error after the blue android screen of installing updates. After restart it puts me on the "encryption failed, please reset to factory settings" screen. I did again the odin install and same issue. I tried a lower firmware but got an odin error.
The big issue is that my SD was actually full and only now I remember allowing the phone to save my pictures on the phone itself 3 months ago...
I just came back from holidays and I really need to get my pictures back before the factory reset.
So I now have only access to the stock (?) bootloader (Jb2v7Ie on imgur, can't post link), the "no command" then encryption failed factory reset screen and last the downloading screen.
I really need your help, I don't want to make a mistake I have barely no experience with all this and I didn't find anything except some shady softwares like dr fone. I don't mind paying 30$ for a software if I can get my pictures back though.
Thanks.
I have a pixel 6a that I successfully rooted but when I tried to unroot it something went wrong. When I restarted the phone I got a message saying
Your device is corrupt. It can’t be trusted and may not work properly.” then it was stuck on the Google logo. I managed to get it unstuck but then when it restarted I got the error message again and it shut off. Now the phone will not turn on at all. I tried charging it for hours. I tried forcing it to turn on with every ossible button configuration I could think of. It is completely unresponsive. Please help. I literally just reviewed it from Google Fi a week ago
Cheesymatt661 said:
I have a pixel 6a that I successfully rooted but when I tried to unroot it something went wrong. When I restarted the phone I got a message saying
Your device is corrupt. It can’t be trusted and may not work properly.” then it was stuck on the Google logo. I managed to get it unstuck but then when it restarted I got the error message again and it shut off. Now the phone will not turn on at all. I tried charging it for hours. I tried forcing it to turn on with every ossible button configuration I could think of. It is completely unresponsive. Please help. I literally just reviewed it from Google Fi a week ago
Click to expand...
Click to collapse
Are you on A13?
Did you have, at the minimum, the A13 bootloader on both slots?
What method did you use to uninstall Magisk?
What happens when you connect phone to computer?
Will Android Flash Tool recognize it? If so, use that to flash back to stock.
Try holding the power button down for at least 30 seconds?
If you were on A13 and didn't have the A13 bootloader on both slots, when bootlooping your phone may have reverted to the A12 slot. If so, your device may be a brick due to the new ARB and you should probably RMA it.
Yes it was A13. And nothing happens when I connect it to my laptop. And I'm not sure what you mean by "both slots". My apologies... This is my very first time rooting and trying to unroot a device
I am also using Linux. So I don't really know what other tools I could or should try other than sdk platform tools.
Cheesymatt661 said:
Yes it was A13. And nothing happens when I connect it to my laptop. And I'm not sure what you mean by "both slots". My apologies... This is my very first time rooting and trying to unroot a device
Click to expand...
Click to collapse
Did you do this after updating to A13?
It's a hard brick as per the link in the above post.
But why root, then unroot?
What steps did you take?
It would be helpful to others to find out where you went wrong.
Cheesymatt661 said:
I have a pixel 6a that I successfully rooted but when I tried to unroot it something went wrong. When I restarted the phone I got a message saying
Your device is corrupt. It can’t be trusted and may not work properly.” then it was stuck on the Google logo. I managed to get it unstuck but then when it restarted I got the error message again and it shut off. Now the phone will not turn on at all. I tried charging it for hours. I tried forcing it to turn on with every ossible button configuration I could think of. It is completely unresponsive. Please help. I literally just reviewed it from Google Fi a week ago
Click to expand...
Click to collapse
Why not post this in Pixel 6a forum?
@Cheesymatt661 Okay so you have unlocked bootaloder + fastboot is working right? One of my friend also faced this and what he did was flashed latest (A13) factory images to both A & B slots separately and that's it. It was simple as that for him.
please i need urgent help with my phone, it started about two weeks ago, i was using my phone and all of a sudden my phone just froze and then rebooted itself, i didn't know what to do so i ignored it and continued using my phone as usual, then after two to three days it happened again, i still didn't know what to do so i ignored it for the second time.
now my problem is that last week it happened again but while rebooting it got stuck at dm-verity corruption, your phone is corrupted and can not be trusted, i tried all i could to reboot it but it's not working,
i did some search on google to know what to do, i found this article on google but after trying it i found out that my device bootloader was locked and i can not unlock it except if the oem unlock toggle is on in the developer option in the phone. then i did some more research and found another article after downloading all the software required, i tried it but sp flash tool keeps saying ERROR: STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001).
i tried using wipe factory setting via recovery menu but it reboots and shows dm-verity error anytime i click it, please i need help.