Related
Hi all. I think this will help you to save some time. Flash KK directly with Flash Tool.
Link: https://drive.google.com/folderview?id=0B6jBYS-HIMjOQWlkWVlRM19kekk&usp=sharing
Enjoy.
stympy said:
Hi all. I think this will help you to save some time. Flash KK directly with Flash Tool.
Link: https://drive.google.com/folderview?id=0B6jBYS-HIMjOQWlkWVlRM19kekk&usp=sharing
Enjoy.
Click to expand...
Click to collapse
Thanks for this.. Will save everybody a lot of time. Cheers !!:good:
Thanq very much for this new firmware..
Sent from my XOLO Q3000 Xtreme V1 by Avinash using XDA Premium 4 mobile app
Thanks for the update, but now files could not be downloaded due to reach of limited access. Is there any mirror site to download?
Hi When download finish it got some errors and once I extract the zip file and found that many files are missing. Anyone got issue like me?
There is a zip file with filename "pradai_row-ota-P780_ROW_8G_S222_140817.zip_WITH_EBR.zip" inside the target_bin folder, can I delete that away ?
It should not have any impact on flashing right ?
Error in file
auto_lover said:
Hi When download finish it got some errors and once I extract the zip file and found that many files are missing. Anyone got issue like me?
Click to expand...
Click to collapse
File size is too big ...1.6 GB !!?? Anyway I decided to download and try. Yes, I also have a problem with the downloaded file. I tried downloading twice. On both the occasions, when I tried to unzip the folder, it is throwing error message as follows for all files :
Unknown method in S222_8GB\P780_ROW_S222_140817\apdb\APDB_MT6589_S01_KK1.MP5_...
Same here. may b a bad download. will try again
Download
I could complete download now.
If you guys have problem in downloading or got error message. This problem occurred when downloading using Chrome browser right?
I downloaded using web browser "Safari" or "Firefox" could be completed without any errors. You can try. Good luck!
---------- Post added at 08:22 PM ---------- Previous post was at 08:11 PM ----------
If you can complete download in anyway but got error while extracting. I run Windows 7 right click at zip file then choose 7 zip to extract.
Guys i have downloaded and installed it succesfully.. I conform there is nothing wrong with the download. Please check your connections and browsers.:good:
File extract
auto_lover said:
I could complete download now.
If you guys have problem in downloading or got error message. This problem occurred when downloading using Chrome browser right?
I downloaded using web browser "Safari" or "Firefox" could be completed without any errors. You can try. Good luck!
---------- Post added at 08:22 PM ---------- Previous post was at 08:11 PM ----------
If you can complete download in anyway but got error while extracting. I run Windows 7 right click at zip file then choose 7 zip to extract.
Click to expand...
Click to collapse
Thank you for the clue. 7 Zip worked for extracting the files without error. Later in the day, will try flashing and report.
ganapathyraman_s said:
Thank you for the clue. 7 Zip worked for extracting the files without error. Later in the day, will try flashing and report.
Click to expand...
Click to collapse
Successfully installed and also got OTA update done for S223. Genie failed to root. VRoot worked. Lower versions of Titanium back up is unable to locate apk file. Higher versions of Titanium back up is stuck on 'checking for root elevation''. Theme center not showing online content but only the couple of local themes. Switching from Dalvik to ART works.
noob here, need a proper guide in how to use the flash tool in the zip file to flash the stock s222 row rom. please guide. thx.
Gouki^ said:
noob here, need a proper guide in how to use the flash tool in the zip file to flash the stock s222 row rom. please guide. thx.
Click to expand...
Click to collapse
Here
http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
The steps are allmost the same.
it would not start after i press the "firmware > upgrade" button. i wonder what i did wrong.
Gouki^ said:
it would not start after i press the "firmware > upgrade" button. i wonder what i did wrong.
Click to expand...
Click to collapse
Open the case and press the small red button. See what happent.
Sent from my Lenovo P780
stympy said:
Open the case and press the small red button. See what happent.
Sent from my Lenovo P780
Click to expand...
Click to collapse
okay, i figured out the problem why it doesnt flash. i cant install the driver even if i manage to catch it in device manager. Win8 wont allow me to install the driver after the device disconnect. pls advise.
Gouki^ said:
okay, i figured out the problem why it doesnt flash. i cant install the driver even if i manage to catch it in device manager. Win8 wont allow me to install the driver after the device disconnect. pls advise.
Click to expand...
Click to collapse
The driver should be installed in this way:
1. plug in the phone
2. the driver should appear like an autorun(one exe file)
3. install driver, double click etc etc next next
4. in device manager it is normal to appear like 1 or 2 seconds max, it is not an error.
5. after you install the driver turn off your phone
6. plug in the cable in the computer and in the phone
7. the driver should install automaticaly.
Tell me if something goes wrong.
stympy said:
The driver should be installed in this way:
1. plug in the phone
2. the driver should appear like an autorun(one exe file)
3. install driver, double click etc etc next next
4. in device manager it is normal to appear like 1 or 2 seconds max, it is not an error.
5. after you install the driver turn off your phone
6. plug in the cable in the computer and in the phone
7. the driver should install automaticaly.
Tell me if something goes wrong.
Click to expand...
Click to collapse
i manage to figure it out. I have to do all this in the link below in windows 8/8.1 to get the driver installed. hope it help other win8 users.:fingers-crossed:
http://revryl.com/2013/08/06/install-unsigned-drivers/
Gouki^ said:
i manage to figure it out. I have to do all this in the link below in windows 8/8.1 to get the driver installed. hope it help other win8 users.:fingers-crossed:
http://revryl.com/2013/08/06/install-unsigned-drivers/
Click to expand...
Click to collapse
Indeed. That's why i do not use windows 8 or 8.1.
Sent from my Lenovo P780
**You can begin the following process from any Build/ROM but you must already have Root Access**
**Required** FlashFire - Play BETA - PREVIEW
1. Join the G+ community using the same Google account as you're using for Play on your phone/tablet Here.
2. Sign up to receive the BETA versions from Play Here.
- Use the link provided after sign-up to download the app.
**Caution!** The process below is only for the G900T T-Mobile S5 Variant. Use on any other device may result in a hardbrick!
Download:
- G900T_OB1_Stock_Rooted_ROM
- G900T_OB1_Stock_DeOdexed_ROM
Set screen timeout to 10 mins before beginning!
1. Place the ROM onto your device (use either internal or ext-sdcard).
2. Open the FlashFire app and "Agree" to the Terms and Conditions.
3. Press "(+)" twice to bring up the "Actions" menu.
4. Select "Flash Zip or OTA" and locate and select the ROM. Leave "Auto-mount" unchecked under the "Options" menu and press the checkmark to continue.
5. From the main menu Uncheck all options under "EverRoot" and use default "Reboot" setting.
6. Last, press the lightning bolt then "Ok" to begin the flash .
The screen will turn black then display the contents of your system before beginning the flash. FlashFire will pause for about 1 minute while flashing the "system" partition. Once complete your device will reboot and pause on the T-Mobile splash screen for about 1 -2 minutes (10 - 15 mins for the DeOdexed version) before completely rebooting. Done!
Tip: for blazing fast speed turn off animations from Developer Options and reboot!
Known Issues:
- None!
Optional - Enable Native Tethering:
- G900T_OB1_TetherAddOn (Flash using FlashFire's "Flash Zip or OTA" option).
Notes:
1. This process will not affect your knox warranty flag.
2. The above process will update your Modem, Non-hlos, System, Kernel, Stock Recovery, and Bootloader to OB1. No need to wipe prior to flashing!
3. If you are currently unrooted and on a non-"Towelroot-able" firmware version you must first a)downgrade to G900TUVU1ANE5 using Odin(perform a factory data reset from recovery after flashing), b)root using Towelroot, then continue with the above process.
Anyone confirmed this for the G900T with pictures and all? If it works, I'll give it an update to the compilation thread.
? Did any one try this
---------- Post added at 06:06 AM ---------- Previous post was at 05:11 AM ----------
Can i just flash this on twrp ...
esema1o said:
? Did any one try this
---------- Post added at 06:06 AM ---------- Previous post was at 05:11 AM ----------
Can i just flash this on twrp ...
Click to expand...
Click to collapse
You can but the whole point is to not use TWRP because it trips your warranty flag.
I just tried this and KNOX has not been tripped. Once my phone has completed the update I'll upload some screenshots.
EDIT:
I apologize for not providing links but I'm below the 10 post threshold.
Mods, I'm just trying to contribute but understand if you need to edit this.
Hope this is enough, if you'd like more please let me know.
ODIN Screen
i.imgur .com/9mu0GlN.jpg
Root Checker
i.imgur .com/abBP0HG.png
november84 said:
I just tried this and KNOX has not been tripped. Once my phone has completed the update I'll upload some screenshots.
Click to expand...
Click to collapse
Nice! Thanks for confirming!
Is there any way of flashing through Odin to go back to KitKat? Just being cautious. If this works great than thanks for all the hard work. Been waiting for this.
Jjday7 said:
Is there any way of flashing through Odin to go back to KitKat? Just being cautious. If this works great than thanks for all the hard work. Been waiting for this.
Click to expand...
Click to collapse
I just went back to KitKat today from stock G900T OTA update. I googled "downgrade galaxy s5 lollipop to kitkat" and the 1st option was a tutorial from AndroidCentral titled "TUTORIAL: Downgrade Samsung Galaxy S5 from 5.0 to 4.4 KitKat."
I successfully downgraded to 4.4.2 after 2 reboots and running "wipe data/factory reset". From there I followed the steps in OP for rooted 5.0 Lollipop.
november84 said:
I just went back to KitKat today from stock G900T OTA update. I googled "downgrade galaxy s5 lollipop to kitkat" and the 1st option was a tutorial from AndroidCentral titled "TUTORIAL: Downgrade Samsung Galaxy S5 from 5.0 to 4.4 KitKat."
I successfully downgraded to 4.4.2 after 2 reboots and running "wipe data/factory reset". From there I followed the steps in OP for rooted 5.0 Lollipop.
Click to expand...
Click to collapse
I'm gonna have to give this a try and see how it goes. I just have to get mobile Odin first. Thanks for letting me know.
I too will be giving this a shot.
Just waiting on the download now
so supper use will work ok been in other post they claim super su was giving them problems.?????
getting error message can't open package when it reboots and goes to the mobile odin screen. This happens after it tries to flash the package. Anybody have any ideas why? I have tried three times.
a bit late for me as i tripped knox but glad this worked out.
1iwilly said:
so supper use will work ok been in other post they claim super su was giving them problems.?????
Click to expand...
Click to collapse
People previously attempted this method by using the inject SuperSU option in MobileOdin. The problem is MobileOdin uses SuperSU v1.94 which is incompatible with 5.0.
Users are now instructed in the OP to untick the inject SuperSU option. Instead the ROM is pre-rooted with SuperSU v2.46.
Worked flawlessly, thanks muniz!
G900T_OB1_100%_Stock_Rooted_ROM
can i just flash this on twrp i wanna test stock lilpop plz any help idont care albout warrantys ijust wanna test the stock rom
G900T_OB1_100%_Stock_Rooted_ROM
Does this erase anything?
EitanXDA said:
Does this erase anything?
Click to expand...
Click to collapse
no, erases nothing, just like a normal OTA update,
I should say thank you to the OP, it worked for me,
only trouble I had was with Mobile Odin- had to switch to Dalvik for it to work
EitanXDA said:
Does this erase anything?
Click to expand...
Click to collapse
I actually intended to include in the instructions to check "wipe data and cache" and "wipe dalvik." But I have not seen anyone report any issues that may stem from not doing so.
Thanks muniz_ri!!!
Work great. I didn't have to wipe cache or dalvik cache.
The official version of Android L B322 is now available for public download.
http://consumer.huawei.com/us/support/downloads/index.htm
Instructions for upgrade can be found here - http://consumer.huawei.com/us/support/manuals/index.htm
Feedback can be left on Huawei Device USA forums - https://community.gethuawei.com/support/f/2
wimbet said:
The official version of Android L B322 is now available for public download.
http://consumer.huawei.com/us/support/downloads/index.htm
Instructions for upgrade can be found here - http://consumer.huawei.com/us/support/manuals/index.htm
Feedback can be left on Huawei Device USA forums - https://community.gethuawei.com/support/f/2
Click to expand...
Click to collapse
Cool, and congrates Wimbet (Taylor ?) so now we finally have a public release again!! flashing it now...
Edit:
Boot to stock recovery doesn't flashing, need to: (copied from above instructions)
1) Copy the dload folder to the root directory of the MICRO SD card.
2) Make sure your handset is power off... then Press the VOLUME UP and VOLUME DOWN keys and POWER key to power on the phone(picture1) , when the HUAWEI logo is showed , release the POWER key and keep pressing the VOLUME UP and VOLUME DOWN keys(picture 2) until your phone is entered the Software Upgrade Mode.
Have they released the kernal source too ?
@xordos, would you mind testing whether the LCD dpi can be lowered in this new build?
medwatt said:
Have they released the kernal source too ?
@xordos, would you mind testing whether the LCD dpi can be lowered in this new build?
Click to expand...
Click to collapse
lol, this is the first thing I am going to test...
Edit,
Tested, lower dpi has same problem as B320/B321, tried set dpi to 284, cannot see soft button and status bar, and phone is not usable except the home screen.
wimbet said:
The official version of Android L B322 is now available for public download.
http://consumer.huawei.com/us/support/downloads/index.htm
Instructions for upgrade can be found here - http://consumer.huawei.com/us/support/manuals/index.htm
Feedback can be left on Huawei Device USA forums - https://community.gethuawei.com/support/f/2
Click to expand...
Click to collapse
Is this going out to all phones. Or is this just forpeople that want to download and install?
xordos said:
lol, this is the first thing I am going to test...
Click to expand...
Click to collapse
Thanks. I have resolutely stayed away from Lollipop simply because of this. Even though I have a ominous feeling that it won't work, it's worth to give it a try !
medwatt said:
Thanks. I have resolutely stayed away from Lollipop simply because of this. Even though I have a ominous feeling that it won't work, it's worth to give it a try !
Click to expand...
Click to collapse
Not kernel release yet. I am checking hourly.
---------- Post added at 05:47 PM ---------- Previous post was at 05:45 PM ----------
medwatt said:
Thanks. I have resolutely stayed away from Lollipop simply because of this. Even though I have a ominous feeling that it won't work, it's worth to give it a try !
Click to expand...
Click to collapse
https://community.gethuawei.com/developers/w/huawei-developers/40.huawei-mate2-mt2-l03
If you wish to look..lol
Moody66 said:
Not kernel release yet. I am checking hourly.
Click to expand...
Click to collapse
Given the way Huawei works, you might need to check a lot .
I have the update showing up in my phone. If I unroot and run the updater, will that be enough to make it work without wiping my phone? I screwed up the last update by not unrooting first, and could only get it done by adding the update to the dload folder and wiping/restoring my stuff. I don't want that again.
neocortex08 said:
I have the update showing up in my phone. If I unroot and run the updater, will that be enough to make it work without wiping my phone? I screwed up the last update by not unrooting first, and could only get it done by adding the update to the dload folder and wiping/restoring my stuff. I don't want that again.
Click to expand...
Click to collapse
As long as you haven't messed with system stuff. Yes. Unroot and stock recovery. If you have changed something system wise.... Unknown.
medwatt said:
Given the way Huawei works, you might need to check a lot .
Click to expand...
Click to collapse
Huawei Mate2 kernel source code
https://community.gethuawei.com/developers/w/huawei-developers/40.huawei-mate2-mt2-l03
---------- Post added at 06:20 PM ---------- Previous post was at 06:18 PM ----------
I'm still going to stick with PAC MAN ROM at the moment. That ROM is killing it on this phone.
http://forum.xda-developers.com/asc...mr1-beta-2-t3186673/post62667019#post62667019
Moody66 said:
As long as you haven't messed with system stuff. Yes. Unroot and stock recovery. If you have changed something system wise.... Unknown.
Click to expand...
Click to collapse
- Clicked "Unroot" in SuperSU.
- Extracted the Recovery.img from the B321 update and flashed it (TWRP is no longer there when I boot into recovery)
- Clicked download and update in the updater software. Clicked "Install" and accepted the prompt.
- Phone boots into the updater and it fails at 26%.
Any ideas why it fails? I am definitely on B321, so I thought I flashed the right recovery and unrooted. I don't think I changed any system files.
neocortex08 said:
- Clicked "Unroot" in SuperSU.
- Extracted the Recovery.img from the B321 update and flashed it (TWRP is no longer there when I boot into recovery)
- Clicked download and update in the updater software. Clicked "Install" and accepted the prompt.
- Phone boots into the updater and it fails at 26%.
Any ideas why it fails? I am definitely on B321, so I thought I flashed the right recovery and unrooted. I don't think I changed any system files.
Click to expand...
Click to collapse
It should tell you why it failed. Immediately after the failure.
Here. that is with exactly one hour screen on time and uploading a 1 gig file the entire time. @medwatt
medwatt said:
Have they released the kernal source too ?
@xordos, would you mind testing whether the LCD dpi can be lowered in this new build?
Click to expand...
Click to collapse
medwatt said:
Thanks. I have resolutely stayed away from Lollipop simply because of this. Even though I have a ominous feeling that it won't work, it's worth to give it a try !
Click to expand...
Click to collapse
Screen time.
Moody66 said:
It should tell you why it failed. Immediately after the failure.
Click to expand...
Click to collapse
Big exclamation point, "Software install failed" underneath, "press powerkey to confirm".
Pressed power button to restart.
Phone reboots to what looks like an updater screen for less than half a second then reboots again.
Boots into the phone fine but still I'm on B321.
Notification screen says ""System update failed last time".
No other notification or information other than that the update is now gone but available to be downloaded again.
neocortex08 said:
Big exclamation point, "Software install failed" underneath, "press powerkey to confirm".
Pressed power button to restart.
Phone reboots to what looks like an updater screen for less than half a second then reboots again.
Boots into the phone fine but still on B321.
Notification screen says ""System update failed last time".
No other notification or information other than that the update is now gone but available to be downloaded again.
Click to expand...
Click to collapse
Ugh. Sounds like you need to do fill install of the update. Hard to tell without it being more specific.
Full update.
https://drive.google.com/file/d/0B97V_YadJs2baHJSTGJDbkI0clE/view?usp=docslist_api. As usual.. Extract to external sd card on dload folder and three button startup.
In case anyone like me who can't bear the phone with gargantuan text, icon etc and would like to change the lcd dpi, don't bother then because the screen will be unusable if you change the lcd value. Just a heads up ! Since I can't stand the phone this way, I'm heading of to try PAC rom ! So long, Huawei and your sh*tty but nice looking EMUI.
@medwatt you will love the PAC rom and updates bi weekly right now. Next build will include new camera app and call record.
superbass311 said:
@medwatt you will love the PAC rom and updates bi weekly right now. Next build will include new camera app and call record.
Click to expand...
Click to collapse
Let's hope so. Everything seems so large that someone looking into your phone might think you're blind ! Does the PAC ROM have the CM theme engine ?
Hello, i have some problems with my Samsung S5 Neo. I did a CF auto root with Odin, but now when i startup my phone, i receive messages like 'TouchWiz stopped', '' etc, and can't see my home screen anymore.
I also tried to install TWRP, but i can't get this working.
If someone can help me through Skype, i will pay you (if phone works correcly).
pakestok said:
Hello, i have some problems with my Samsung S5 Neo. I did a CF auto root with Odin, but now when i startup my phone, i receive messages like 'TouchWiz stopped', '' etc, and can't see my home screen anymore.
I also tried to install TWRP, but i can't get this working.
If someone can help me through Skype, i will pay you (if phone works correcly).
Click to expand...
Click to collapse
Hi there..
I maynot be able to help you on skype but will surely try to help.
Hope your device gets recognised by odin and you can reboot to download mode.
Then you just have to download the firmware from here : https://samsung-firmware.org/model/SM-G903F/
Now unzip it and load firmware in odin .
Then just flash it onto your device.
Steps
1)Connect your phone to your PC. Odin will detect it in ID :COM
2)Download lastest firmware available
3)Select "AP" and select the downloaded firmware in tar file (if it is a zip file, you need to decompress it)
4)Verify that only "Auto reboot" & "F-reset" is ticked. Click on Start.
5) Wait till the phone reboots and that's it.
If.you have network issues after reboot, then uncheck Auto reboot option and try again.
Hope this helps
Sent from my VS987 using Tapatalk
Thank you, i'm downloading and i let you know about progress.
My Android version was: 5.1.1. but i see there is 6.0 available. Is it posible to use this one? Because my Android never said there was an update available.
pakestok said:
Thank you, i'm downloading and i let you know about progress.
My Android version was: 5.1.1. but i see there is 6.0 available. Is it posible to use this one? Because my Android never said there was an update available.
Click to expand...
Click to collapse
Just make sure that your model number and region matches with the downloaded firmwarwe...rest should be good[emoji3]
Also check this link
https://www.google.co.in/amp/www.theandroidsoul.com/galaxy-s5-stock-firmware/amp/
Sent from my VS987 using Tapatalk
---------- Post added at 01:13 PM ---------- Previous post was at 01:09 PM ----------
Also. Sammobile is a trusted website for firmwares...check there too if you want.
Sent from my VS987 using Tapatalk
Hey, Here is a link to the Android Oreo OTA
https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-U2CQL1-UP
https://drive.google.com/open?id=1xTtsn6gcg4JEX2dYKPiXTWVhPiGPzIBn
Before you can do this build you will need to be on 2BQK2, so to get to that you need this build: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQU2BQJA-to-S2BQK2-UP
ODIN for BQK2: https://androidfilehost.com/?fid=889964283620771190
this file for BQJA is on SamMobile, SamFirm, and Updato. These are OTA updates besides the flashing required in that.
UPDATE! New build has been released. It is CQL7. To get to that, flash BQK2 with Odin (linked above) then OTA from BQK2 to BQL5 then another OTA from BQL5 to CQL7.
BQK2 to BQL5: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-S2BQL5-UP
BQL5 to CQLB: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQL5-to-U2CQLB-UP
BRA8 to CRB8 https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS3BRA8-to-U3CRB8-UP
THIS WILL UPDATE YOUR BOOTLOADER TO V3, YOU CAN NOT DOWNGRADE
BQL5 Odin: https://samsung-firmware.org/download/Galaxy__Note8__/c7o0/VZW/N950USQS2BQL5/N950UOYN2BQL5/
Oh just a side note, this may be unstable and crash, you have been warned.
This is a discord server with things as they come out. discord.gg/4uxusu8
thanks to thesbros for making the website
(https://i.imgur.com/oBT3bTA.jpg)
(https://i.imgur.com/f8CU1IP.jpg)
mweinbach said:
Hey, Here is a link to the Android Oreo OTA
https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-U2CQL1-UP
Before you can do this build you will need to be on 2BQK2, so to get to that you need this build: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQU2BQJA-to-S2BQK2-UP
ODIN for BQK2: https://drive.google.com/uc?id=19gW_CxUf2HdL4UYyxTkyOnBY8cluRIVS&export=download
this file for BQJA is on SamMobile, SamFirm, and Updato. These are OTA updates besides the flashing required in that.
I currently have an S8 on the Oreo beta and will be buying a Note8 this weekend because of this. I AM SO EXCITED!
Oh just a side note, this may be unstable and crash, you have been warned.
Click to expand...
Click to collapse
How does one go about flashing this? I'm currently on Sprints latest update
mweinbach said:
Hey, Here is a link to the Android Oreo OTA
https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-U2CQL1-UP
Before you can do this build you will need to be on 2BQK2, so to get to that you need this build: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQU2BQJA-to-S2BQK2-UP
ODIN for BQK2: https://drive.google.com/uc?id=19gW_CxUf2HdL4UYyxTkyOnBY8cluRIVS&export=download
this file for BQJA is on SamMobile, SamFirm, and Updato. These are OTA updates besides the flashing required in that.
I currently have an S8 on the Oreo beta and will be buying a Note8 this weekend because of this. I AM SO EXCITED!
Oh just a side note, this may be unstable and crash, you have been warned.
Click to expand...
Click to collapse
And again thanks to ..... lol
This is the unlocked version ???
Sent from my SM-N950U1 using Tapatalk
Del
powerstroke said:
How does one go about flashing this? I'm currently on Sprints latest update
Click to expand...
Click to collapse
1. Download Odin and flash this https://drive.google.com/uc?id=19gW_CxUf2HdL4UYyxTkyOnBY8cluRIVS&export=download
1.5 In CSC use HOME_CSC to keep data, normal to wipe
2. Download this file: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-U2CQL1-UP
3. If you have an SD card, transfer that to your Sd carz
4. Boot into recovery
5.SD: select update from sd card then select your OTA called update.zip
5.ADB: on your phone select sideload over adb then type adb sideload update.zip (replace that update.zip with full file directory)
nexus6r3plicant01 said:
This is the unlocked version ???
Sent from my SM-N950U1 using Tapatalk
Click to expand...
Click to collapse
N950U, so kinda but no, not really. If you set your CSC to A then yah, if not it has carrier bloat.
mweinbach said:
1. Download Odin and flash this https://drive.google.com/uc?id=19gW_CxUf2HdL4UYyxTkyOnBY8cluRIVS&export=download
1.5 In CSC use HOME_CSC to keep data, normal to wipe
2. Download this file: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-U2CQL1-UP
3. If you have an SD card, transfer that to your Sd carz
4. Boot into recovery
5.SD: select update from sd card then select your OTA called update.zip
5.ADB: on your phone select sideload over adb then type adb sideload update.zip (replace that update.zip with full file directory)
Click to expand...
Click to collapse
I'm already on sprints latest. That ok or do I need to downgrade before doing update.zip in recovery? Any mirrors for U2CQL1? Every time I try to download, it fails
powerstroke said:
I'm already on sprints latest. That ok or do I need to downgrade before doing update.zip in recovery? Any mirrors for U2CQL1? Every time I try to download, it fails
Click to expand...
Click to collapse
You need to be on BQK2 as linked in OP
Been downloading that ota file for 15 min and only at 1 percent lol. Thanks for this tho. Can't wait to see if this works.
jaceypoo said:
Been downloading that ota file for 15 min and only at 1 percent lol. Thanks for this tho. Can't wait to see if this works.
Click to expand...
Click to collapse
Uploading a mirror as i type this.
jaceypoo said:
Been downloading that ota file for 15 min and only at 1 percent lol. Thanks for this tho. Can't wait to see if this works.
Click to expand...
Click to collapse
I seriously just got to about 750 mb downloaded of the file and it just stops and starts over. Can't get it downloaded? What the heck lol
I was at 12 percent and the same thing happened to me lol. I'll just wait for the mirror.
Somehow, after 4 attempts at downloading, it worked and only took ~5 mins. everything appears to be in the zip file. I loaded the BK2 file (never got cell signal, and had a lot of strange things in settings) and am applying the update now. Hopefully this doesn't screw up anything. with the BK2 my settings showed custom for the status though, so not sure if I just screwed myself out of Knox stuff.
---------- Post added at 10:14 PM ---------- Previous post was at 09:35 PM ----------
Looks like it's working, some things I noted:
I had a few strange apps in my service folder (BoA and some games)
Samsung connect was causing a bunch of force closures.
Even though I was on unlocked before this, I ended up on Verizon (my carrier).
Everything else seems normal, and had I done a wipe I'd probably be in even better shape. Might to a whole tomorrow.
Sent from my SM-N950U using Tapatalk
damn, this was sniffed out from the AT&T servers?
_Dennis_ said:
Somehow, after 4 attempts at downloading, it worked and only took ~5 mins. everything appears to be in the zip file. I loaded the BK2 file (never got cell signal, and had a lot of strange things in settings) and am applying the update now. Hopefully this doesn't screw up anything. with the BK2 my settings showed custom for the status though, so not sure if I just screwed myself out of Knox stuff.
---------- Post added at 10:14 PM ---------- Previous post was at 09:35 PM ----------
Looks like it's working, some things I noted:
I had a few strange apps in my service folder (BoA and some games)
Samsung connect was causing a bunch of force closures.
Even though I was on unlocked before this, I ended up on Verizon (my carrier).
Everything else seems normal, and had I done a wipe I'd probably be in even better shape. Might to a whole tomorrow.
Click to expand...
Click to collapse
Can u post some screenshots? Anything new in settings or design?
note3userr said:
Can u post some screenshots? Anything new in settings or design?
Click to expand...
Click to collapse
Settings is new some screen shots of it here
https://www.imgur.com/a/c0MJ2
Sent from my SM-N950U using Tapatalk
where is the odin for this? The link does not have Odin
technicalvampire said:
where is the odin for this? The link does not have Odin
Click to expand...
Click to collapse
Don't need odin for this, it's an OTA.
Just put it on your phone, and go to recovery mode and flash from update.zip or whatever.
Longcat14 said:
Don't need odin for this, it's an OTA.
Just put it on your phone, and go to recovery mode and flash from update.zip or whatever.
Click to expand...
Click to collapse
First part does...