Hi everyone, I have a Lenovo zuk z2 pro, and it does not go out of EDL mode
I've tried everything, all the possible key combinations, it also has no indication of any led on, it just gets the screen all black and does nothing else, when I connect it to the USB port, QFIL recognizes it in the EDL 9008 mode, can anyone help me please?
Thank you in advance for your attention.
Related
Hi all, I have a Lenovo P780 4GB that I flashed successfully with SPFT, P780_S125_130529 ROM from needrom.com. from there the phone will not boot but I can see is a red led charging light glowing while connecting it to a computer or charger. The device is not getting recognized by VCOM drivers so no use with flash tool any more. the only thing I see from Device manager is Alcatel Single RNDIS Interface #2. when I plug the phone to the computer I can hear the device connected/disconnected sound, Tried to reboot in to recovery and meta mode but the phone simply does not turn on. Anyone knows how to fix this problem?
Is there any other way I can get the device to change modes or rather a way to get it to be recognized by the PC?
a solution to fix the device will be the best.
Thanx for the help
Hello i have a huge problem with my k920 no boot no screen only blue led light when i connect the usb.In device manager is found as qualcomm hs-usb diagnostics 9006 (com13) everytime i connect it so is not discovered by emmc software.Is there any way i can fix it?bring it back to get the windows recognise it as hs-usb qdloader 9008 so i can flash new rom?
soulfreem said:
Hello i have a huge problem with my k920 no boot no screen only blue led light when i connect the usb.In device manager is found as qualcomm hs-usb diagnostics 9006 (com13) everytime i connect it so is not discovered by emmc software.Is there any way i can fix it?bring it back to get the windows recognise it as hs-usb qdloader 9008 so i can flash new rom?
Click to expand...
Click to collapse
Did you solve this problem? I have the same
Enter EDL Mode With K920
For Entering in EDL (Emergency Download Mode) In K920 ,
First try turn off your phone completely
then press Volume + and open your QFIL Program and connect usb cable to this (in this mode recognize as 9008 mode)
then you can flash it
but i flashed all rom that i know and still errors continues,
anyone know how can i Format my phone (Brush it from all previous things install on phones) ?
Enter testing, factory mode, power button+volume down. Wipe data, erase sd card, factory reset.
Same problem here.. Tried to flash with wrong model TWRP
Not only Blue light
K920
Recently, I bought a xiaomi redmi note 3 with the 650 version. I switch to Miui 8 China Fastboot Room from a Global Fastboot Rom, also for unlocking the bootloader. But after I have finished my flashing, it turns out that the Note 3 can't turn on, Stucking on the MI logo for 2 times then turns off again. I tried connecting it to the PC, but the led blinks red. I tried to flash the Miui again but it doesn't show the device. My PC recognized the port as Qualcomm HS-USB Diagnostics 900E, but I can't take it to EDL mode. I tried entering it from the Fastboot mode but still didn't work. Any Help?
*P.S: It also blinks red when I entered the Fastboot Mode
Just checking, but did you use the fastboot edl v2 to enter EDL?
danted7 said:
Recently, I bought a xiaomi redmi note 3 with the 650 version. I switch to Miui 8 China Fastboot Room from a Global Fastboot Rom, also for unlocking the bootloader. But after I have finished my flashing, it turns out that the Note 3 can't turn on, Stucking on the MI logo for 2 times then turns off again. I tried connecting it to the PC, but the led blinks red. I tried to flash the Miui again but it doesn't show the device. My PC recognized the port as Qualcomm HS-USB Diagnostics 900E, but I can't take it to EDL mode. I tried entering it from the Fastboot mode but still didn't work. Any Help?
*P.S: It also blinks red when I entered the Fastboot Mode
Click to expand...
Click to collapse
when i fail to unlock bootloader in official method then i tried miui8 flashboot Rom from mi flash tool with modified emmc_appsboot.mbn file from one of the developer i bricked my Redmi note 3 Qlcmm650
solution:- 1) remove back cover & disconnect the battery around 1 minute reconnect it (recomended one if this not possible for you then try 2nd method)
Or
2)full discharge the battery Then charge it more then 35% (it will also work as diconnecting the battery)
connect the computer &and press volume + & - button together
connect the PC & vol buttons press both are at the same time then you enter the correct EDL mode (same red light but this time correct EDL mode you can flash the rom use official Fastboot rom Dont modify the contents)
if i helped you hit thanks
I was in same situation today: Mobile doesnt do anything else then red-blinking, no edl or fastboot. Pc only saw "Qualcomm HS-USB Diagnostics 900E".
Found the solutions mentioned by Chinmayhegde, but i didnt get the cover off the device and dont want to damage new mobile.
then i found the method "Deep Flash".
its small manipulation of usb-cable: put a small wire on second terminal, put in pc and then pull the wire.
i succeded after second try. then pc sees "Qualcomm HS-USB QDLoader 9008" again and miflash is able to flash the device.
see this tutorial for creating the modded usb cable: http://en.miui.com/thread-310325-1-1.html
Hope it works
if your phone still able to enter fastboot, you can try to use fastboot to edl v2 to enter download mode
if it still not help, most safe & easy mode is using deep flash cable as above post
I have same problem.
Even I try booting fastboot mod but it keeps restarting.
Even fastboot logo comes by just pressing volume down button. So I think power button is stuck. That's make phone restart all the time.
How to overcome this problem?
Thanks
Sent from my SM-G900I using XDA-Developers mobile app
I fix my phone.
Open back cover and undo power cable flex and battery connctor from motherboard and put back after 1 min.
Phone started normal.
thanks
Sent from my SM-G900I using XDA-Developers mobile app
danted7 said:
Recently, I bought a xiaomi redmi note 3 with the 650 version. I switch to Miui 8 China Fastboot Room from a Global Fastboot Rom, also for unlocking the bootloader. But after I have finished my flashing, it turns out that the Note 3 can't turn on, Stucking on the MI logo for 2 times then turns off again. I tried connecting it to the PC, but the led blinks red. I tried to flash the Miui again but it doesn't show the device. My PC recognized the port as Qualcomm HS-USB Diagnostics 900E, but I can't take it to EDL mode. I tried entering it from the Fastboot mode but still didn't work. Any Help?
*P.S: It also blinks red when I entered the Fastboot Mode
Click to expand...
Click to collapse
Try To Remove Your Battery than Use MiFlash Tool To Flash Your Mobile Bro.
Greetings
seems my phone is stuck in EDL mode - I can only see it via QPST . no fastboot nothing happens when trying to get into fastboot it s just black screen.
is there a way to recover? can I buy access to MsmTool or something?
Thanks
Yes check here
HELP REALME GT 8/128 CN HARDBRIK
Hi guys, I recently bought a gt realme on aliexpress and I didn't realize it was the cn version, while trying to change the rom via flashboot my pc died, in the middle of the process. Now it doesn't turn on, and when connected via usb only the...
forum.xda-developers.com
Hi Everyone,
I have a 4 year old Nokia 7.1 that was working fine a week ago with Android 10.
I accidentally let the battery drain out, phone would not turn on - no Android, no download mode, nothing on the screen however I turn it on - power/volume up/down, etc
I have replaced the battery with a brand new one (very carefully).
New to Android flashing but...
On attaching to PC I get HS-USB Diagnostics 9008 device. I have QFIL, QPST, firmware, firehose programmer for SDM636, etc.
I have shorted pins 3,4 internally, rebooted phone, battery in, battery out. Whatever I do it won't enter EDL mode to try reflashing.
QFIL always says - Switch to EDL Fail Failed to Switch to Emergency Download Mode.
Tried Linux with sahara, etc and phone is visable, but again no respose - can't enter EDL mode.
I have a feeling the hardware may be fried anyway
Am I doing something wrong? Any ideas? Do HMD block EDL?
I think its a lost cause...
Thanks.