Greetings
seems my phone is stuck in EDL mode - I can only see it via QPST . no fastboot nothing happens when trying to get into fastboot it s just black screen.
is there a way to recover? can I buy access to MsmTool or something?
Thanks
Yes check here
HELP REALME GT 8/128 CN HARDBRIK
Hi guys, I recently bought a gt realme on aliexpress and I didn't realize it was the cn version, while trying to change the rom via flashboot my pc died, in the middle of the process. Now it doesn't turn on, and when connected via usb only the...
forum.xda-developers.com
Related
Hi
Actually, I have a redemi note 4x device. last week unfortunately I flashed a wrong Rom on my phone and it became brick
I can not turn it on and it does not go to recovery mode or fastboot mode or anything
I understood that I need to flash the Rom with deep flash cable
I ordered deep flash cable and followed instructions but my laptop does not recognize Qualcomm driver
I press the bottom on the cable and then connect the phone but it does not recognize it
it is really annoying that I can not do anything for it
I have heard redemi note 4x does not go to EDL mode with this cable is that true?
Has anyone any solution?
Ps: I opened the back of the of the phone even tried to use 2 points to jumper but it did not work really so I ordered the cable but it seems the cable is also not working
I appreciate if anyone knows a way regarding this problem
Thanks and Regards
flash firmware then rom
Hey guys, i am hoping someone can help me.
I have bricked my phone, no recovery, no fastboot, nothing, just vibrations and notification led. So i managed to open up phone and to disconnect battery.
Next thing i installed lattest sp flash tool v5.1952, and i found authentication file on xda. I downloaded 11.0.7.0 global image, and use Android_scatter file from there. I installed both drivers for mediatek preload one and vcom drivers, and rebooted my phone.
So i turned the phone off, by disconnecting battery, pressed start on sp flash tool, connected the phone via usb cable, but nothing is happening. I also tried while phone was on but same thing.. Have anyone have same issues, can somebody help me please?
You will need a authorized mi account if u have can you please help me
Hello Members,
The device was stuck in boot loop so i tried to flash via EDL mode. First it came to edl mode but while flashing i got some XML error. Now i tried to put the phone again in EDL mode but its not working.
I had removed the battery and and i have connected to 2 jumper pins 1 and 4 and connect the usb but the phone dont seems to come to edl mode. just flashes the MI screen and power off repeatedly.
Now i connect the phone directly with battery on and its coming as charging but surprisingly the phone got detected, the device manager shows the phone as Linux file stor gaget usb device. I tried to flash with mi flash tool and its running indefinitely saying flashing..
Help...
Hey, I need Some help ASAP, I am in a Big trouble. So The whole scenario is that I decided to install the Paranoid Android 11 in my Mi A3 and After Unlocking the Bootloader, I changed the Boot Slot from A to B and Flashed the Twrp file ( to the boot ) and Pressed the Power and Volume down Button, The Phone turned off and is not turning on Not Even the Fastboot Logo, Its Bricked. (Here are some additional Points Which you Should Know, 1. I checked the ports on my Computer and It was Showing Qualcomm HS-USB QDLoader 9008 So I think the phone is in EDL mode. 2. I tried to Flash Mi A3 Stock Firmware using Miflash and It was Showing Error "Cannot receive hello Packet") The Phone is my Daily Driver and If anyone can, Please help me Fix this.
Even I got the same issue after downloading the latest Android 11, then got rectified the Mobile through the nearest service center.
Globally many people experienced the same issue.
Now it is ok !
use qfile and service rom
set up in ufs mod
plug off battery and connct usb with short test point
load files 0/1/2/3/4/5 and
elprfesor said:
use qfile and service rom
set up in ufs mod
plug off battery and connct usb with short test point
load files 0/1/2/3/4/5 and
Click to expand...
Click to collapse
could you explain it more?
I also dead briked my phone after install a11 and used qfil to flash some stuff in edl mode using test points,
I recommend using the right qualcomm driver 32 or 64 bits like your OS and also reboot after install driver,
I don't recommend open the back painel bcs even u doing it right it don't close well after bcs lose stickiness,
If u can just go to a service, they can manage with this better then u.
Same here. Even opened the back cover to touch the EDL points.
Tried getting out of that mode by flashing to stock ROM using the Mi Flash Tool as I'm getting a weird error, `Input string was not in the correct format`. even when using the very same input as I've seen on a YouTube Tutorial & I had also tried it out on the very same version of Flash Tool (and still got the error)
Hi,
My BLA-L09 (Mate 10 Pro) is bricked due to a bad firmware update. I have a black screen, I cannot enter any mode (recovery, fastboot). But when I plug/unplug the phone, Windows detects it. I've downloaded (and paid some credits) DC-Phoenix. Now the phone is detected as a USB COM 1.0 device since I've installed the driver as explained here https://www.dc-unlocker.com/flash-bricked-huawei-phones-in-huawei-1-mode. With Dc-Phoenix, I can boot into fastboot mode thanks to testpoint mode. But my problem is that everytime I leave fastboot mode, the phone screen turn to black (like if it's shut down).
I guess my board software is broken, so I would lilke to re-install a fresh board software (via testpoint fastboot mode using Dc-Phoenix), but unfortunatelly, I cannot find a place to download board software for BLA-L09.
Anyone knows where we can find board software for BLA-L09?
Is there another way to unbrick my phone? Considering I can go in fastboot mode, I hope there is still a chance!
iBen68 said:
Hi,
My BLA-L09 (Mate 10 Pro) is bricked due to a bad firmware update. I have a black screen, I cannot enter any mode (recovery, fastboot). But when I plug/unplug the phone, Windows detects it. I've downloaded (and paid some credits) DC-Phoenix. Now the phone is detected as a USB COM 1.0 device since I've installed the driver as explained here https://www.dc-unlocker.com/flash-bricked-huawei-phones-in-huawei-1-mode. With Dc-Phoenix, I can boot into fastboot mode thanks to testpoint mode. But my problem is that everytime I leave fastboot mode, the phone screen turn to black (like if it's shut down).
I guess my board software is broken, so I would lilke to re-install a fresh board software (via testpoint fastboot mode using Dc-Phoenix), but unfortunatelly, I cannot find a place to download board software for BLA-L09.
Anyone knows where we can find board software for BLA-L09?
Is there another way to unbrick my phone? Considering I can go in fastboot mode, I hope there is still a chance!
Click to expand...
Click to collapse
Take a look at my GDrive Folder
Btw latest DC provides software testmode and hard brick recovery...