Hi, everyone.
I have not been able to play Pokémon Go on my LeMax2 (X829).
I'm using Cuoco92 (28S_M18.4).
Magisk (v.16.0) and Magisk Manager (5.7.0) are up to date. And the Pokémon Go is marked in the Magisk Hide.
But, despite all this, the game does not open on my smartphone. What could be happening?
Another choice
Marcello_Lobo said:
Hi, everyone.
I have not been able to play Pokémon Go on my LeMax2 (X829).
I'm using Cuoco92 (28S_M18.4).
Magisk (v.16.0) and Magisk Manager (5.7.0) are up to date. And the Pokémon Go is marked in the Magisk Hide.
But, despite all this, the game does not open on my smartphone. What could be happening?
Click to expand...
Click to collapse
I was using cuoco92 too, so I decided to change my ROM to a new one, I installed Pixar with Android Oreo 8.1 and after it Magisk Manager. Hiding Pokemon GO with magisk was working ok, but this new ROM was not focusing the camera...
hkbemil said:
The reason is that the selinux mode of stock bootloader(boot.img) is in permissive, so you could not play Pokemon Go.
I tried to solve the same problem for a few months ago.
I tried several ways in various ways and eventually succeeded.
You can pass the basic integrity of the safetynet test by disassembling the bootloader and adding "enforcing=1" to the cmd_line.
The selinux mode will change to be enforcing and you could play Pokemon Go without Magisk.
I am an x820 user, I think that x829 has same problem.
I tested on 26s and 28s rom of X820, not test on 30s yet.
Click to expand...
Click to collapse
Heyyo, the reason. Why 26s, 28s and 30s struggle is they are Chinese ROMs which were never Google SafetyNet certified so they will never pass without attempting Magisk.
Only North American, Indian and Russian (afaik anyways) builds of EUI ROM are SafetyNet certified.
It also requires bootloader to be locked.
Otherwise? You will need a ROM that exploits SafetyNet via the kernel with a greenlight hack. LineageOS Pro, DU12, Pixel Experience and tbh I'm unsure which other ones have it. I do remember that OmniROM Nougat official builds had it as well.
Please note I said LineageOS Pro by GalaticStryder and not official LineageOS since LineageOS team is against exploiting SafetyNet as to abide by what Google wants custom ROMs to do. That's also why they dropped user builds for userdebug builds.
Hope this makes sense.
You need to back for 19s Indian stock.
ThE_MarD said:
Heyyo, the reason. Why 26s, 28s and 30s struggle is they are Chinese ROMs which were never Google SafetyNet certified so they will never pass without attempting Magisk.
Only North American, Indian and Russian (afaik anyways) builds of EUI ROM are SafetyNet certified.
It also requires bootloader to be locked.
Otherwise? You will need a ROM that exploits SafetyNet via the kernel with a greenlight hack. LineageOS Pro, DU12, Pixel Experience and tbh I'm unsure which other ones have it. I do remember that OmniROM Nougat official builds had it as well.
Please note I said LineageOS Pro by GalaticStryder and not official LineageOS since LineageOS team is against exploiting SafetyNet as to abide by what Google wants custom ROMs to do. That's also why they dropped user builds for userdebug builds.
Hope this makes sense.
Click to expand...
Click to collapse
i ve instaled stock american x829 20s and still not passing safetynet
jorgeffonte said:
i ve instaled stock american x829 20s and still not passing safetynet
Click to expand...
Click to collapse
Heyyo jorgeffonte, have you tried relocking your bootloader in developer options and then rebooting?
If that doesn't work? Maybe you will need the EUI ROM x821 19s as it definitely passes SafetyNet.
Otherwise? After a bunch of changes on LineageOS 15.1? We do pass SafetyNet without any hacks... But the issue for Nintendo games is it will detect bootloader unlocked and that it's a userdebug build, so Pokémon Go wouldn't work unless you used Magisk...
It's quite the bummer that Nintendo are very anti-custom ROM...
I'm on revengos with magisk with the hide module and it works fine.
Related
Hey guys,
Since latest update (v0.37.0) of Pokemon Go, rooted devices users are blocked from entering the game. See this article on xda-dev.
The only (known) solution to bypass this is to follow this guide : http://www.androidpolice.com/2016/09/11/guide-play-pokemon-go-0-37-rooted-android-magisk/
BUT...
It seems that flashing Magisk-v6 modifies kernel or something because on Mokee's CM13 ROM, i don't have GPS or internet data anymore.
If i restore boot from TWRP, GPS and internet are working again, but not Magisk.
Is there a CM13 ROM for Kenzo (usable as a daily driver) that works with Magisk?
There is another alternative by chainfire, but need the latest systemless supersu v2.78 SR1!
It is experimental and may not work for everyone.
Also I don't think it works with xposed!
See here
corkiejp said:
There is another alternative by chainfire, but need the latest systemless supersu v2.78 SR1!
It is experimental and may not work for everyone.
Also I don't think it works with xposed!
See here
Click to expand...
Click to collapse
Thanks for your help! Since it won't work with Xposed, i will wait for a stable release.
It's good to see that Chainfire is involved.
That's good news. will give it a shot sometime. If anyone tries it before please let me know what you did and how it went
If this gets a stable release I might give it a try. I'm running official CM13.0 btw.
Okay, latest stable release of CM13 official works perfectly with Magisk-v6 on my Kenzo.
But to play Pokemon Go 0.39, systemless Xposed need to be disabled (so a reboot is needed).
Plus, SafetyNet Helper app returns "false" to the "CTS profile match" test. So i guess Android Pay won't work.
i just stoped playing since they forced me the update
no harse feeling. wasnt fun anymore anyway
was lvl32 and used pokemon go controls to get to the nearest city 25km from my house since there is nothing around me.
i played once a day toke gyms back if they where taken thats all .
anyway i dont miss it to much trouble to get it working no worth it
So I got a Max 2 x829 which came with a case. It's running Android 6.0.1. It fails SafetyNet CTS and Basic Integrity, so does not run Pokemon Go. Is this expected, or did a reseller add malware on the device?
Mine suffers from the same problem. Where did you buy yours?
I wouldn't put much stock in safety net.
castuis said:
I wouldn't put much stock in safety net.
Click to expand...
Click to collapse
What do you mean? Not passing SafetyNet means not being able to play/download some of the best games on the PlayStore. I think it's relevant.
Same here. I'm using cuoco92 ROM. I tried safety net that comes with magisk manager, but it doesn't work. I really doubt that there is malware installed, but I've no idea why it fails...maybe because ROM is rooted?!
Let me think about this... Most people have buy this device from a international reseller shop instead of the official Leeco store or online shop. Makes sense cause I'm pretty sure that most of the users here on the board are not living in China or India.
Every online shop is installing a custom ROM to make sure that as many languages as possible are supported. The most installed "Shop-Rom" is couco92...
As far as we know every Android device that is able to run a custom ROM needs an opened bootloader and especially couco92 comes with the ability to run SuperSU and Root!
If you just search Google for "SafetyNet" you find an official statement why it's not possible to run Banking or
Pay-Apps and why there's no possibility to run games like Pokemon go on rooted devices!!!
So let me think again about this...
Sorry guys but I also don't understand why the hell this device isn't able to pass the SafteyNet check! It must be because of malware or something like this!!!
Sorry for being so damn ironic! Hopefully it's self explaining why I wrote a post like this and you are able to get the informations you are looking for from the text...
Thanks for the answer, albeit the unnecessary sarcasm. Assuming that's true (which sounds quite reasonable) would the original ROM fix the problem? is the original ROM maybe supporting english language? And could anyone confirm such ROM does indeed pass SafetyNet checks? Thanks!
So ended up flashing the last Indian stock ROM. That solved the "basic integrity" check and now I can download from Play Store apps not previously visible. However, still does not pass the CTS check.
I believe such checks are over exaggerated, hackers can hack strongly locked iPhones or anything similar, so it doesn't matter CTS pass or fail as long as you keep your phone fully scanned with reasonable antivirus/security apps.
I think thats because your phone has bootloader unlocked.
This is the reason:
Devices that ship with Google's Play Store and other apps installed must pass Google's Android “Compatibility Test Suite”. Rooting a device or installing a custom ROM prevents a device from being “CTS Compatible”. This is how the SafetyNet API can tell if you're rooted–it merely checks for CTS compatibility. Similarly, if you get an Android device that never came with Google's apps–like one of those $20 tablets shipped direct from a factory in China–it won't be considered “CTS compatible” at all, even if you haven't rooted it.
Click to expand...
Click to collapse
Source
Heyyo, use the official LineageOS MM ROM. It passes safety net. There's some other ROMs but I'm not sure. I'll try it on Mokee MM build and report back.
RR N fails Safety Net as it is pre rooted and some other tweaks that cause it to fail.
Oh, another reason why it can fail safety net is modem firmware. You might have to revert to a Chinese or Indian or international modem firmware. I don't think developer firmware works for SafetyNet
ThE_MarD said:
Heyyo, use the official LineageOS MM ROM. It passes safety net. There's some other ROMs but I'm not sure. I'll try it on Mokee MM build and report back.
RR N fails Safety Net as it is pre rooted and some other tweaks that cause it to fail.
Oh, another reason why it can fail safety net is modem firmware. You might have to revert to a Chinese or Indian or international modem firmware. I don't think developer firmware works for SafetyNet
Click to expand...
Click to collapse
I can't pass SafetyNet with latest (04/29) LineageOS 13 nightly. I tried with Chinese 23S modem, wipe everything except Internal Storage, and install Open GApps Pico. I still get CTS Profile Mismatch. I tried with it as my Internal ROM under MultiROM, which I believe should be OK. I think it's expected to fail if installed as a Secondary. In any case, I have no particular reason I need to pass SafetyNet, I just thought I'd try. I've read that on newer Android devices, an unlocked bootloader can cause SafetyNet to fail (unless kernel is patched). I didn't try re-locking my bootloader so that could be it.
Heyyo, hmm well I tried ASOP based DU rom but it failed too but then again I'm using MultiRom as well so I'm unsure if that messes with it since it's a custom boot.img which I think is part of the SafetyNet check...
Hello,
I'm looking for rom with google play certification. There is Cardinal OS but I would like to have certification on other rom - AOSP extendent or lineage ( this is my sister phone, she use Netflix and sometimes Pokemon go) . Is there any way to have this certification on any rom?
szaracz said:
Hello,
I'm looking for rom with google play certification. There is Cardinal OS but I would like to have certification on other rom - AOSP extendent or lineage ( this is my sister phone, she use Netflix and sometimes Pokemon go) . Is there any way to have this certification on any rom?
Click to expand...
Click to collapse
Magisk will do the job in easy way.
Long, and longer process:
1) Build an Android ROM with user build type.
2) Build a custom kernel that bypasses verified boot and some other checks reported by bootloader.
3) Never, ever do any modifications to system, even root.
Sent from my Redmi Note 4 using XDA Labs
I had certified google play on every single ROM, you are doing something wrong.
szaracz said:
Hello,
I'm looking for rom with google play certification. There is Cardinal OS but I would like to have certification on other rom - AOSP extendent or lineage ( this is my sister phone, she use Netflix and sometimes Pokemon go) . Is there any way to have this certification on any rom?
Click to expand...
Click to collapse
You can either use Magisk or go unrooted.
I have the 10" Wifi M5 (Chinese version c00), and finally realized that it will never get widevine L1 so I decided to unlock the bootloader and install a custom ROm. I've tried Resurrection Remix beta 3.1 and the lastest OmniRom which should have widevine L1, but unfortunately i still can't get it.
So my next step is installing Magisk to try and see I can pass safetynet. Just wanted to know if anyone has installed it on an OpenKirin Rom before I try it?
Thanks.
ChildishGambino3005 said:
I have the 10" Wifi M5 (Chinese version c00), and finally realized that it will never get widevine L1 so I decided to unlock the bootloader and install a custom ROm. I've tried Resurrection Remix beta 3.1 and the lastest OmniRom which should have widevine L1, but unfortunately i still can't get it.
So my next step is installing Magisk to try and see I can pass safetynet. Just wanted to know if anyone has installed it on an OpenKirin Rom before I try it?
Thanks.
Click to expand...
Click to collapse
I was just realizing that actually as well, i have a Chinese one too and noticed no L1. If you didn’t have L1 on stock, then you won’t get it under OpenKirin either, as the keys need to be baked into the hardware. I think Huawei only did that or enabled those for the Euro C423 models, but not on Chinese C00.
What stock ROM version were you on when you decided to unlock the bootloader?
konradsa said:
I was just realizing that actually as well, i have a Chinese one too and noticed no L1. If you didn’t have L1 on stock, then you won’t get it under OpenKirin either, as the keys need to be baked into the hardware. I think Huawei only did that or enabled those for the Euro C423 models, but not on Chinese C00.
What stock ROM version were you on when you decided to unlock the bootloader?
Click to expand...
Click to collapse
I'm on 171. Is there a way to rebrand the m5 to another region? C423 seems to be the only good version. The US variant doesn't seem to have 5ghz wifi.
ChildishGambino3005 said:
I have the 10" Wifi M5 (Chinese version c00), and finally realized that it will never get widevine L1 so I decided to unlock the bootloader and install a custom ROm. I've tried Resurrection Remix beta 3.1 and the lastest OmniRom which should have widevine L1, but unfortunately i still can't get it.
So my next step is installing Magisk to try and see I can pass safetynet. Just wanted to know if anyone has installed it on an OpenKirin Rom before I try it?
Thanks.
Click to expand...
Click to collapse
ChildishGambino3005 said:
I'm on 171. Is there a way to rebrand the m5 to another region? C423 seems to be the only good version. The US variant doesn't seem to have 5ghz wifi.
Click to expand...
Click to collapse
Not afaik. Didn’t see any success stories of people successfully doing that.
I have a Poco F1 (8 GB, 256 GB) that I use as a primary device for my personal communications as well as work.
To access corporate apps, It's enrolled into Intune MDM (Mobile Device Management) and I was wondering if moving to lineage or any other custom ROM would prevent me from MDM enrollment. It's currently on MIUI 12.0.3 | Android 10 and I was planning to move to gain some battery life + next android version by flashing the device.
Has anyone flashed their device and re-enrolled into MDM successfully without any major headache? I also want to know if your payment apps such as Paytm/GPay/Amazon Pay will work just fine on a custom ROM or not. I have been out of touch with flashing/modding for a while now. So, if you have any ROM/Kernel recommendations that you have for Poco F1, please do share it.
Thanks!
No idea about Intune MDM but Paytm/Bhim/GPay, YONO etc. all work fine in conjunction with MagiskHide. Only Axis Mobile app doesn't work. Still on Magisk v23 so I haven’t tried v24 and the new DenyList which is supposed to be even better.
I have been using crDroid almost exclusively for the past almost 2.5 years. Very stable with plenty of customization options and excellent battery backup. I haven't tried crDroid 8.x based on A12 yet.
Hi Yes. I am using it for my work email. I have flashed my POCO F1 with Pixel Experience Android 12 rom and Magisk 24.1 for hiding root (using Zygisk) service.
It works well with Intune and MDM. I have tested this with Lineage OS 18.1 as well.
One thing is do not disable Encryption when you burn a new ROM. With this Intune behaves much better.