Hi !
After flashing UK Oreo image with the steps provided here on my t-820 (original firmware, stock recovery, no root )
As you can see Odin log shows all OK when i flash
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4920 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> persist.img.ext4
<ID:0/005> userdata.img.ext4
<ID:0/005> modem.bin
<ID:0/005> adspso.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
but after the tablet restart for the first time after the upgrade it got stuck on bootloop showing samsung logo back and forth and doesnt start at all, ive tried to get into recovery mode but it also gets a bootloop the only option available is get to download mode. I still can get my S3 detected by Odin when i get to download mode.
Please advice.
rayxanber said:
Hi !
After flashing UK Oreo image with the steps provided here on my t-820 (original firmware, stock recovery, no root )
As you can see Odin log shows all OK when i flash
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4920 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> persist.img.ext4
<ID:0/005> userdata.img.ext4
<ID:0/005> modem.bin
<ID:0/005> adspso.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
but after the tablet restart for the first time after the upgrade it got stuck on bootloop showing samsung logo back and forth and doesnt start at all, ive tried to get into recovery mode but it also gets a bootloop the only option available is get to download mode. I still can get my S3 detected by Odin when i get to download mode.
Please advice.
Click to expand...
Click to collapse
The UK-version of Oreo DOESN'T have USERDATA
Put the files in BL AP & CSC (CSC_BTU or HOME_CSC_BTU)
Re:
THANKS !!!
In fact i've only use the PDA file while flashing, i'll try adding the files you mention.
I had the same problem, but then I just flashed the BL and AP and it booted fine after that. Mine failed when I tried with the CSC. Good luck!
Re:
kream21 said:
I had the same problem, but then I just flashed the BL and AP and it booted fine after that. Mine failed when I tried with the CSC. Good luck!
Click to expand...
Click to collapse
Hi !
Did you mean you got a bootloop again after flashing the CSC ? Did you try with both CSC files or just one of them ?
rayxanber said:
Hi !
Did you mean you got a bootloop again after flashing the CSC ? Did you try with both CSC files or just one of them ?
Click to expand...
Click to collapse
No i got a fail. I only used one. When I flashed just the BL and AP I got a pass and everything worked out fine.
Thank you both.
I've flash again using the 3 files and the tablet is working now.
Related
I'm trying to flash my phone from china with a Hong Kong ROM and I get the following failure message using Odin v3.07:
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> modem.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone help?
hope u downloaded .tar extension rather than .zip.....just to make sure....
whkng said:
I'm trying to flash my phone from china with a Hong Kong ROM and I get the following failure message using Odin v3.07:
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> modem.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone help?
Click to expand...
Click to collapse
whkng said:
I'm trying to flash my phone from china with a Hong Kong ROM and I get the following failure message using Odin v3.07:
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> modem.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone help?
Click to expand...
Click to collapse
Is your phone in download mode?
androb0t said:
hope u downloaded .tar extension rather than .zip.....just to make sure....
Click to expand...
Click to collapse
Turn off the phone and pull the battery and after seconds insert the battery and then go in downloadmode and try again. Try downloading Odin v3 3.0.4 never had an issue with that.
Download Failed
sometimes your phone will say download is incomplete or something like that.
try again when that happens, and it works.
don't know why.
Thanks for all your replies.
Let me elaborate a bit on the situation.
Actually I tried both Odin v3.04 and v3.07 for the last few days.
After many "operations" (root the phone, insall CWM, busybox, etc) on the phone with download mode with Odin, the flash counter of the phone is now 8 (shown on the top right corner in download mode) , which means I know the basic operation of usually Odin.
I also tried to download the Samsung GS3 Toolkit v3.0 from xda here and try to use the tool provided in case I have something wrong in understand the whole procedure.
I tried to connect to Kies now and I find out something has changed the CSC:
Original: PDA:LG1/PHONE:LG1:/CSC:LG1(CHU)
Now: PDA:LG1/PHONE:LG1:/CSC:LED(CHU)
The latest message when I tried to flash the rom to the phone is as follows:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300ZSALG3_I9300ZSALG3_I9300ZSLG3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> modem.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
BTW, is there any difference between flashing a custom ROM and a stock ROM?
Thanks all in advance.
Custom roms flash as per their instructions usually via CWM .
Stock flash via Odin.
ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
Probable corrupt NAND .
jje
Thanks jje.
If NAND corrupted, what can I do to fix it?
JJEgan said:
Custom roms flash as per their instructions usually via CWM .
Stock flash via Odin.
ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
Probable corrupt NAND .
jje
Click to expand...
Click to collapse
bootloader locked ?
I also heard that it may be about bootloader lock, but I don't know how to verify this.
Anyone can help, please?
whkng said:
Thanks jje.
If NAND corrupted, what can I do to fix it?
Click to expand...
Click to collapse
Hello all,
I rooted my galaxy s3 and all went fine, then the battery died (battery is no longer in use) so i bought a new one and all was well, upon flashing stock rom, the write failed.
When booting the phone up it says: "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
(LONG DELAY HERE)
<OSM> I9305XXBLL5_I9305EVRBLL2_I9305BVBLL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> recovery.img
<ID:0/005> modem.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas? I need help!
Bad flash wrong firmware or more likely file is corrupt .
Make sure Kies is not running as well .
jje
I tried newest uk beta (BTU) recently and i wasn't happy about the battery etc.
Flashed newest lollipop firmware for NEE csc. I have tried so many firmwares and no luck .. :crying:
Do i miss something big time? and i am 100% sure about that firmware is right.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925IDVU2COF8_G925IODD2COF8_G925IDVU2COF8_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Getting this kind of log from odin. note this is copy from another thread, otherwise same but buildnumber is different..
I can't even flash twrp/philz recovery. without getting some error, PIT related.
I can't access recovery by anymeans as it wil boot up to that ''smart switch blablabla'' and pc will say it is not supported etc.
I only can access download-mode.
I have tried flash stock 5.1.1 PIT but it makes no difference.
This is 32gb model. How deep i'm in brown?
Got this working!
First i used odin 3.10.7 -> all fails
Then tried 3.10.6 -> first try successfully only that hidden.img was failed but i extracted from firmware and and flashed it after that.
Hope this helps someone.
if you had used smart switch on your pc, it was a lot easier............:good:
lambik333 said:
if you had used smart switch on your pc, it was a lot easier............:good:
Click to expand...
Click to collapse
Maybe if i would done it in first place, but i didnt. Used odin as it usually will do job. And this case smart switch didnt reconized phone at all. :good:
i was using odin trying to re install the stock firmwar and it comes up with this error: check fail device:3 binary:1 and on odin it says<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
help me please!
also i tried factory resseting it and i remove the os period ahh
clewesman said:
i was using odin trying to re install the stock firmwar and it comes up with this error: check fail device:3 binary:1 and on odin it says<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
help me please!
also i tried factory resseting it and i remove the os period ahh
Click to expand...
Click to collapse
Can you get into bootloader? If so fire up smart switch on your pc and click over to emergencey recovery and type in your model number and serial number all in capitals and it should download the software and flash it
I've had this happen too me twice,first make sure you flashing the correct firmware,mine worked once I had the official firmware and my phone wouldn't even enter recovery.
Hi there,
I am a newbie, i apologize for any noob question or mistake.
I followed these instructions
Instructions from sammobile
Extract (unzip) the firmware file
Download Odin v3.10.7
Extract Odin ZIP file
Open Odin v3.10.7
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Its not a brick phone but this version of Cyanogenmod has a lot of bugs hence i want to flash stock rom. i want to be very careful.
Odin fails to flash stock image.
I am getting following error message.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> BcmCP.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
Any help would be appreciated. i dont want to brick this phone.
Thank you.