Related
Yesterday i bought a HTC Hero (my first one). When i turned it on and toke a good look at the starting screen (the one that says Hero, and HTC), i found a white pixel, probably dead or something. I went back to the store to get a new phone. This was not a problem at all and i got a new Hero. Now again, when i turned on the phone and toke a good look at the black screen, i also found 2 pixels with a other wierd problem:
The pixels also turned out white when i looked at them in a specifica angle. Just to be clear, i am watching on a black screen (starting screen). If you look at the screen and not in a specific angle i cant spot the pixels directly, but when i tilt over the phone slightly they show up and are 2 little white dots.
After i found out i downloaded the Detect Dead Pixel app. This app can create a black screen, the same screen as the home screen. When i use this app to spot the pixels again they are way less visible than on the home screen... I can spot 1 of them a little bit if i look at the screen in a certain angle and i can see a little dot, but i cant see them that good as on the home screen. They are not visible on other colors, only black.
I really dont know what to do with the phone now ... does anyone know what this is? im a bit concerned. Thanks!
After a bit more research on my phone i firugred that the dots really arent that visible. Maybe its just dust under the screen? When i put on a black screen using some kind of Android app i can not spot them. If the pixel is lazy or dead it should be clearly visible on a black screen right? for the lazy one then.
Anyway, i spotted a other problem on a black screen:
A brighter spot on the top part of the screen (like someone is pressing on it a little bit). Is this a problem ? im deciding if i should return the phone again..
Well its entirely upto you mate - i dont know what contract you've taken out but you may have that phone for 2 years. If your not entirely happy with it i'd take it back while you still can.
Issues with the screens rarely correct themselves.
My first Hero had around 10 dead pixels and i got it replaced as i wasn't happy with it. I now have one with a perfect screen and i'm really happy with it!
Well i just returned to the store and got another phone. This is the 3th one, and it still has problems, even more then the previous ones ....
On the boot screen there are about 10 very very tiny white wierd points visible ... im getting a bit frustrated here. What is this with all the screen problems ? :S
looks like they got a bad batch in your shop... have you considered powering up the phone while you are still in the store? might save you same time and way...
kendong2 said:
looks like they got a bad batch in your shop... have you considered powering up the phone while you are still in the store? might save you same time and way...
Click to expand...
Click to collapse
I have done that, but as i said, its only really visible in a dark room with screen brightness on 100%. I have checked the phone in the store and it just wasnt visible. When i checked the screen in a complete dark room i spotted the little things again. Looks more like dust to me =\
If your brightness is 100% you should see that one single pixel immediately.
Try making an image in paint (480*320) with a black background and a single white pixel. Open that image on your phone. The dead/lazy pixel should be just as bright as the one you drew.
Also the brighter spot is normal. It's called "backlight bleeding". Every lcd screen has this 'problem'.
They are not clearly visible, i think they are smaller then pixels, but they are countable on the bootup screen. When i tilt the screen them seem to change color (might just be dust). Green etc. I dont know what to think of it, come on. A wrong batch shouldn't be the problem if its dust, then its just a assamblation error. But 3 in a row?
I'm getting a bit pissed
It's dust or a fingerprint blocking a very small subpixel. Can't you just wipe it off? But I suspect very tiny scratches.
idk whether this is possible, but it might be dead subpixels. that would explain why they are smaller than a full pixel...
Does anyone know if that is possible? it sounds like a good explaination. Dead sub pixels could be the problem. They are smaller then pixels, but beg enough to be counted (i can count over 13). Little white dots on a 100% brightness black screen.
It must be dust, its a common question among hero owners. Most of the time the things they see is dust. It would be crazy if all new hero's have up to 10 or 13 dead pixels.
Ok well, here's what happened next:
I returned my phone again, god my cash back, bought a new one at a other store, SAME problem. Swapped it for a new one again, same problem!
Got my money back and i completely changed my mind of buying a Hero.
It is not dust. Its a perfect white dot, and definately some kind of pixel issue.
To bad..
Are you sure you're not being pixel-paranoid?
When reading all of this it sounds mostly like small dust particles under the screen. And looking at the number of phones you have tried, chances are you also got one with a real dead pixel (hot pixel, always on).
But I also think you are obsessed about it. My phone also have one dust thingy somewhere which I found just like you did (pixel tester, black screen). Smaller than pixel and less bright though.
I never notice the thing under normal use, unless I really go searching for it with a black background.
So you might make it bigger than it really is and miss out on a really nice phone.
Then again, we all have our own quality standards and its good yours is a high one!
I have had a tiny dead pizel since I bought my phone. Only really see it on the bootscreen.
I was always more bother by the light you can see coming from under the keys at the bottom and near where the lcd meets the keys.
I also have 3 dead pixels but they aren't that irritating.
I also discovered them when booting up the phone, but for me, they are sea blue (all three)
Maybe it is 2nd hand stuff HTC uses on their phones?
i have about 7 or 8 dead pixels too. it doesn't bother me too much anymore... only notice it in a completly dark room on the boot up screen... probably a common problem with the lcd screen the hero uses
All Hero's have this, or will have it inevitably:
The screen does not connect fully; there is a rubber-border between the glass and the metal frame surrounding the screen.
Look from the right angle, and you can see that there is a small 1/10th mm opening. Dust will come through here, and it will get on the screen.
HTC will wipe it off free of charge of course.
It is NOT a dead pixel; these can be seen from any angle, although the color changes a little but because of the viewing angle.
Call HTC and say you have dust under your screen, they will fix it for you, free of charge.
My wife broke her screen on Friday and we went to a local shop to get the screen fixed yesterday.
This morning she mentioned that she thought the color on the new screen was different. She also pointed out that the buttons at the bottom didn't light up the same.
They practically don't light up at all.
The screen seems a bit dimmer as well. Not as bright and clear.
Is there any way that I can find out what kind of screen they put in her phone short of threatening to bulldoze the shop unless they put the right screen in?
I'm more than capable of dissasembling the phone without killing it and now wish I had but wifey wanted a working phone *today*
Can anyone help out? Are there any part numbers I can use to see what she's got now?
can you take a picture of the phone from upwards, and from sideways (to see if the screen is thicker than it should be)
sounds like it's a regular LCD screen
xriderx66 said:
can you take a picture of the phone from upwards, and from sideways (to see if the screen is thicker than it should be)
Click to expand...
Click to collapse
not without taking it apart first
You can tell if its LCD by how deep the blacks are.
Sent from my SGH-T959 using XDA App
michaelh99 said:
My wife broke her screen on Friday and we went to a local shop to get the screen fixed yesterday.
This morning she mentioned that she thought the color on the new screen was different. She also pointed out that the buttons at the bottom didn't light up the same.
They practically don't light up at all.
The screen seems a bit dimmer as well. Not as bright and clear.
Is there any way that I can find out what kind of screen they put in her phone short of threatening to bulldoze the shop unless they put the right screen in?
I'm more than capable of dissasembling the phone without killing it and now wish I had but wifey wanted a working phone *today*
Can anyone help out? Are there any part numbers I can use to see what she's got now?
Click to expand...
Click to collapse
definitely got shafted. you got an LCD screen. i'm pretty sure the local shop orders their parts from eBay or some chinese supplier. those screens are usually LCD even tho some may claim its amoled. the only way to get a genuine Super AMOLED screen is to contact samsung to replace it. i remember reading somewhere than samsung is not distributing their Super AMOLED screens to 3rd parties
michaelh99 said:
My wife broke her screen on Friday and we went to a local shop to get the screen fixed yesterday.
This morning she mentioned that she thought the color on the new screen was different. She also pointed out that the buttons at the bottom didn't light up the same.
They practically don't light up at all.
The screen seems a bit dimmer as well. Not as bright and clear.
Is there any way that I can find out what kind of screen they put in her phone short of threatening to bulldoze the shop unless they put the right screen in?
I'm more than capable of dissasembling the phone without killing it and now wish I had but wifey wanted a working phone *today*
Can anyone help out? Are there any part numbers I can use to see what she's got now?
Click to expand...
Click to collapse
I used to be a cellphone technician for a short time and I can tell you that we fixed screens on a lot of touch screen phones... but all the parts are dirt cheap chinese knockoffs!!! There is NO local shop that uses original OEM parts!!! unless u send it back to tmobile or etc!
to answer short and accurate u didnt get the same screen ur vibrant came with!
^$%#
Now I really feel like a total idiot
Hey guys, today I dropped my HOX+ (International), not for the first time, but this time the glass shattered.
Ofcourse I don't want to spend buckets for some professionals, I will try to do it on my own.
Only the glass broke, touch is still fine. Only thing I noticed are 2 little holes in the glass where
the colors seem a little bit orange. Now my questions are:
1.Is it possible to only swap the digitizer (glass) or is it too hard glued together with the LCD panel?
2.Are the orange spots (you can barely see them) a problem or the LCD panel or will they
be fixed with a new digitizer?
3.Which HOX models have the same screen as the X+, I heard the international HOX has the same,
is that true?
4.Are the LEDs of the HOX+ menu buttons red or is it just the digitizer? White buttons would look great, too.
5.Do I really need replacementkits for like 60 euro with tools and all that stuff or can I do it with my own tools
at home? My father is not a professional but he already fixed all kinds of electronic things, I got his help.
6.If replacing only the digitizer is possible should I do it or would u recommend to replace the whole screen,
that would also prevent dust in the screen.
7.In many videos they didn't shut down the phone so they could test whether it worked, is that recommended or can I break smth?
That's all I had to ask, tell me which mistakes you did or some tips etc.
Hope I get some fast responses, so I know which things to order, thanks in advance
Tazmaniiac said:
Hey guys, today I dropped my HOX+ (International), not for the first time, but this time the glass shattered.
Ofcourse I don't want to spend buckets for some professionals, I will try to do it on my own.
Only the glass broke, touch is still fine. Only thing I noticed are 2 little holes in the glass where
the colors seem a little bit orange. Now my questions are:
1.Is it possible to only swap the digitizer (glass) or is it too hard glued together with the LCD panel?
2.Are the orange spots (you can barely see them) a problem or the LCD panel or will they
be fixed with a new digitizer?
3.Which HOX models have the same screen as the X+, I heard the international HOX has the same,
is that true?
4.Are the LEDs of the HOX+ menu buttons red or is it just the digitizer? White buttons would look great, too.
5.Do I really need replacementkits for like 60 euro with tools and all that stuff or can I do it with my own tools
at home? My father is not a professional but he already fixed all kinds of electronic things, I got his help.
6.If replacing only the digitizer is possible should I do it or would u recommend to replace the whole screen,
that would also prevent dust in the screen.
7.In many videos they didn't shut down the phone so they could test whether it worked, is that recommended or can I break smth?
That's all I had to ask, tell me which mistakes you did or some tips etc.
Hope I get some fast responses, so I know which things to order, thanks in advance
Click to expand...
Click to collapse
first of all sorry for the screen.
1 . you can't change the glass only because its one part at all. like the glass,touch panel and the LCD are the same piece its too hard to separate them unless you have a IR Oven. so try the whole screen replacement. the international HOX screen is ok but the capacitive buttons will be white not red.
ps:don't try to open the chase with your own unless you know what you are doing . cuz i opened mine for like 20 times and every time i was breaking something in it. Mostly the power switch flex is real easy to be broken. good luck with that.
ps2: im suggesting you to buy the original spare of the hox+ screen and replace with that. you can do it with the box one but I'm not very sure the screen voltages are the same or compatible totally..
peace :angel:
So I am back again:
I took a new One X Plus Screen and built it in the phone..
I can turn it on, my PC detects the device, menu buttons are glowing. Now 4 problems:
-LCD is not working (digitizer works fine, I tested it with swipe to wake)
-vibrator thing is not working
-speakers not working
-menu button LEDs are glowing, but u can't see the buttons itself glow, only the LEDs are glowing
I am pretty sure that everything is plugged in how it should be done, any ideas?
Don't have a phone right now so fast help would be appreciated, thanks in advance.
Edit:
-vibrator thing is actually working, it was just blocked by something
-Menu buttons can't glow because there is something between LEDs and the screen, gonna fix that later
-speakers can't work because they are in the housing, sry for that mistake
Now the only problem left is the lcd, i am going to check again whether the lcd cable
is connected or not. If you have any ideas for other reasons why the lcd could not wok
please tell me.
Another question: under the menu buttons of my old screen were 3 transparent plastic pieces,
at first I thought it were the leds, but they are actually nothing electrical, just plastic pieces
glued on the screen. What are they for, do I have to keep them?
So my girlfriend dropped her s3 the other night , the screen stays off ( does not light up ) but the touch sensors still work, we can answer calls on it by knowing the approximate location of the answer button, any thoughts on what the issue is ? I would prefer to repair this at home rather than make her pay money through a shop, thanks in advance
Darknod66 said:
So my girlfriend dropped her s3 the other night , the screen stays off ( does not light up ) but the touch sensors still work, we can answer calls on it by knowing the approximate location of the answer button, any thoughts on what the issue is ? I would prefer to repair this at home rather than make her pay money through a shop, thanks in advance
Click to expand...
Click to collapse
It is easy to replace broken GLASS.
but i think you will need to replace screen.
If you purchase assembly of glass, digitizer and screen it will be very easy to replace by yourself.
quaker1985 said:
It is easy to replace broken GLASS.
but i think you will need to replace screen.
If you purchase assembly of glass, digitizer and screen it will be very easy to replace by yourself.
Click to expand...
Click to collapse
The glass isnt broken, perfectly clean with no scratches cracks or nicks , it just wont light up;
i had the same problem once, had to be sent to samsung (or wherever) by the shop where i bought it
buying a display and metal frame (obviously you can't buy them seperatly) plus glass would have cost almost the same
i wanted to find out whether the screen still works and it's a problem with my motherboard or vice versa so i unscrewed all bolts to access where the screen is plugged in on the motherboard but i didn't have another s3 to do the same and check it :silly:
still don't know how amoled displays work so it might be possible that whatever's responsible for backlighting the display broke
w0rinal said:
i had the same problem once, had to be sent to samsung (or wherever) by the shop where i bought it
buying a display and metal frame (obviously you can't buy them seperatly) plus glass would have cost almost the same
i wanted to find out whether the screen still works and it's a problem with my motherboard or vice versa so i unscrewed all bolts to access where the screen is plugged in on the motherboard but i didn't have another s3 to do the same and check it :silly:
still don't know how amoled displays work so it might be possible that whatever's responsible for backlighting the display broke
Click to expand...
Click to collapse
My thought was that the backlight broke or maybe the entire display system is disconnected , I might just have to take it apart for an exploratory operation,
before it went completely black there was a purple stain which grew until two thirds of my display were purple, the lower part where it started was black.
then i managed to open this samsung hardware debugging menu where you can check for dead pixels by letting your display light up in red, green and blue. there i found out that only blue and green pixels very working correctly in the upper third. the next day every purple pixel was dead.
so 2 months after this little stain appeared my whole display was in the same state as your girlfriend's seem to be now.
so i don't think this plug (it sits in place pretty tight) got loose and that's why it doesn't work anymore.
and my sister had exactly your problem. she dropped her s2 and it immediately went black
she hat to sent it in as well ...
good luck
if you find out what's the problem and want to share it, i am curious about it as well
If possible, check for loose connectors first.
I don't know about replacing the screen. The sheer amount of LOCA makes it a messy job.
Probably the display is dead. You'd need to replace the screen+glass.
There is no back light on an oled screen.
Sent from my GT-I9300 using Tapatalk
Hi, about 1mm on the left side of my display no longer response to touch, all other parts of screen work just fine, but this makes typing dificult and I don't have money to either buy new phone or getting it repaired(cost about the same). So is there a way to either increase the left side border or apply a custom border that will stay there in all apps and keyboards and basically moving screen to the right 1mm. Or a custom launcher that could add this feature?
This happened after I added tempered glass(supplied with the phone) to my phone, and even after removing the tempered glass problem persists.
I just need a solution untill I have money to to get it repaired or buy a new one.
My phone is Firefly Mobile Intense Desire, 5.5" screen 1280x720 IPS, 3GB ram 32GB ROM, 3550mAh battery, Android 5.1 Google Now launcher - not rooted - best phone I have ever had.
Hope for a quick response - before I go nuts
Jan