Hi I have the Note 8 and ever since the Oreo update my phone been acting funny my screen got darker the when I get a call I can slide the button on ls because it freezes the phone so I have to pull down notification bar and pick up from there also the sound got lower I did wipe cache partitions and nothing but I noticed at the bottom that it says:
fail to open recovery_cause(No such file or directory)#
#Reboot Recovery Cause is [UNKNOWN]#
remove failed dir *‘/system/carrier/ATT/priv-app/AttIqi_ATT’ (No such file or directory)
E: [libfs_mgr]Error fetching verity device number: No such device or address
E: [libfs_mgr]Couldn’t get verity device number!
E: [libfs_mgr]Error removing device mapping: No such device or address
Successfully verified dmverity hash tree
So I used Odin to flash the firmware but when I checked I'm still getting the same error message please can someone tell me how to fix that I will really appreciate it very much :silly:
Is it a T-Mobile note 8 or AT&T note 8?
Sent from my God Mode 8
Same issue, fail to open recovery_cause...
Mine is from Xfinity / Galaxy S8 plus SM G955U
The problem in my phone is "not network connection" everything else works great maybe some problem with EFS I don't know I need help
Model Sm-n950u
Carrier Tmobile
Baseband N950USQS4CRE1
Chula3652 said:
Model Sm-n950u
Carrier Tmobile
Baseband N950USQS4CRE1
Click to expand...
Click to collapse
It looks like the firmware you are trying to flash is for AT&T. Make sure you get the t-mobile version ....S4CRE1...which should be the latest version bootloader 4
And try again
Sent from my God Mode 8
having same issue. phone only boots in combination. flashed 2 firmware fully and still the same. any advice?
my note 8 got stuck in bootloop even when i flashed stock firmware via odin!!!!! can someone tell me what's happening?
ghallab said:
my note 8 got stuck in bootloop even when i flashed stock firmware via odin!!!!! can someone tell me what's happening?
Click to expand...
Click to collapse
Not unless you give us more information... What did you flash? What was the name and baseband of the firmware you flashed? Also what firmware is phone currently on?
fail to open recovery_cause(No such file or directory) Reboot Recovery Cause is [UNKN
Have sm-g955f, and have that problem after last upgrade. First my fast charging stop working and when I try to Factory recover,I notice this error. Can any one fix it? Im not IT expert. Guess lots of ppl have problems with s7s8s9... my last phone was S6+ and work just fine. Now when they start to kick every 2 monts new S version,all is bad,full of bugs,errors.. If you have some advice pls tell me. Thnx
Related
Hello all,
A friend of mine has a galaxy note 2 from AT&T. I'm not clear as to what exactly he did but he says he had it unlocked and had custom firmware on his phone and the phone did an update on its own and locked up, but by looking up on the Internet all signs point to a soft brick. The phone only turns on and displays firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. My dumb as volunteered to help him as I thought how hard could this be? Anyway Kies failed to help. Secondly I followed the instructions on here as far as downloading Odin, downloaded stock firmware, downloaded Samsung drivers. I plug it in a all appears good in Odin. Mp5 file checks OK and once it starts running there is even a progress bar on the phone showing its downloading but once it gets to the end it fails every time. The screen on the phone displays
Odin Mode
Product name sgh-I317
Current Binary Samsung official
Current status: custom
Knox warranty void: 1
RP SWREV: A3
SW REV: invalid magic string
Any help would be appreciate I've almost had it with attempting to help. He apparently didn't know what he was doing now I obviously don't know what I'm doing.
Thatguycurt said:
Hello all,
A friend of mine has a galaxy note 2 from AT&T. I'm not clear as to what exactly he did but he says he had it unlocked and had custom firmware on his phone and the phone did an update on its own and locked up, but by looking up on the Internet all signs point to a soft brick. The phone only turns on and displays firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. My dumb as volunteered to help him as I thought how hard could this be? Anyway Kies failed to help. Secondly I followed the instructions on here as far as downloading Odin, downloaded stock firmware, downloaded Samsung drivers. I plug it in a all appears good in Odin. Mp5 file checks OK and once it starts running there is even a progress bar on the phone showing its downloading but once it gets to the end it fails every time. The screen on the phone displays
Odin Mode
Product name sgh-I317
Current Binary Samsung official
Current status: custom
Knox warranty void: 1
RP SWREV: A3
SW REV: invalid magic string
Any help would be appreciate I've almost had it with attempting to help. He apparently didn't know what he was doing now I obviously don't know what I'm doing.
Click to expand...
Click to collapse
Sounds like you are trying to install a version of the firmware that is older than the one that was on there. What is the build version that you are trying? What step is it failing at in Odin? I'd recommend getting the newest version of 4.4.2 to avoid the risk of trying to downgrade.
Odin fails right at the end. I see a green progress bar on the phone as well as on my pc screen. I'm at work right now so I'm not too sure as to exactly what or where it fails. What firmware do you recommend I attempt to place on it? Thanks for your reply also, I appreciate it.
Thatguycurt said:
Odin fails right at the end. I see a green progress bar on the phone as well as on my pc screen. I'm at work right now so I'm not too sure as to exactly what or where it fails. What firmware do you recommend I attempt to place on it? Thanks for your reply also, I appreciate it.
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal.../rom-att-i317-ucucne5-mj4-stock-odex-t2802189
es0tericcha0s said:
http://forum.xda-developers.com/gal.../rom-att-i317-ucucne5-mj4-stock-odex-t2802189
Click to expand...
Click to collapse
Which one do I pick?
Ok...update....
After using Odin to put this firmware on AT&T UCUCNE5 i317 Stock ODIN Note 2 the phone actually rebooted when finished and seemed like everything was normal. However it shows Samsung Keyboard has unfortunately stopped working every ten to fifteen seconds and will not stop. I tried clearing data and cache of the Samsung keyboard app and that did not work. I tried factory and data reset of the phone as well as wipe partition cache and none of that worked. Any suggestions?? I couldn't do anything so I
managed to use a Bluetooth keyboard to go to play store and download new keyboard app but I'm using my google account for that and I personally don't want him having my account on his phone.
I apologize for all the troubles, I'm trying to help him out and didn't realize I was in over my head with no experience on this.
Thatguycurt said:
Ok...update....
After using Odin to put this firmware on AT&T UCUCNE5 i317 Stock ODIN Note 2 the phone actually rebooted when finished and seemed like everything was normal. However it shows Samsung Keyboard has unfortunately stopped working every ten to fifteen seconds and will not stop. I tried clearing data and cache of the Samsung keyboard app and that did not work. I tried factory and data reset of the phone as well as wipe partition cache and none of that worked. Any suggestions?? I couldn't do anything so I
managed to use a Bluetooth keyboard to go to play store and download new keyboard app but I'm using my google account for that and I personally don't want him having my account on his phone.
I apologize for all the troubles, I'm trying to help him out and didn't realize I was in over my head with no experience on this.
Click to expand...
Click to collapse
You'll need to install a custom recovery, use that to wipe the system partition and data reset again then immediately reboot to Download Mode and reinstall the NE5 update.
You sir have been very helpful and I can't thank you enough. I was clueless coming into this thinking I could help my friend effortlessly but that was not the case. I've never had the intentions of rooting a phone or placing a custom mod on one but honestly now I'd like to try it lol!! With your help and this website I was able to fix his phone. I can't thank you guys enough. You're awesome!!!
This is my first post to a forum, so please bear with me...
So a few days ago, a friend of mine got a Verizon Samsung Galaxy S4 from someone, for free. He got it for free because the screen's glass is cracked a bit, and the phone is bricked; the previous owner didn't know what to do with it. I decided I would try to fix it, because if I do, I might be able to buy it off him and give it to my little sister, who currently has a dying iPhone 5C.
When I turn on the phone, it boots, showing the samsung logo, showing the red Verizon screen, and playing the boot tune. Then, just when you'd expect it to go to the OS, it shows a screen which at the top reads "Device memory damaged". Below that, it says "The data partition has been corrupted. You need to reset your phone to factory defaults. This will erase all your data." And below that is a button, which says "RESET PHONE". Tapping on it does nothing.
I have worked with android phones before (rooting, ROMs, locked bootloaders, bricked phones; even all these things on a Galaxy Gear smartwatch), and I know what the data partition is. I remembered that the recovery on samsung phones have an option to wipe the data partition. So I tried to access the recovery menu by holding Power, Home, and Vol+ when the phone is off. It doesn't work either . It shows the Andy robot laying on its back with a door open on its belly, with a warning icon popping out. So the recovery is dead...
I thought I could try to fix the recovery by flashing it with Odin :fingers-crossed:; Didn't work. It is blocked because the phone can't verify version . Then, after a little more research, I realized I might be able to fix the recovery by flashing a whole stock ROM. I don't know what firmware the phone is running, because I can't ask the previous owner. So I tried a few KitKat ones, and they were all rejected by the phone. Then I booted the phone back up, and I realized the RESET PHONE button acted like it was part of a Lollipop UI (There is a darker circle that extends from the part of the button where you tap). So I went back into download mode and tried to flash the 2 OTA versions of Lollipop (OC1 and OF1). The error this time was "SW REV. CHECK FAIL : fused : 8 , Binary : 6". This may or may not be the error I got before with the KitKat ROMs. I don't remember, and I'm not at my desktop to try the old ROMs.
After looking up this error, I found no exact results, but there were ones with a similar error. People said that it means a ROM is being flashed that is too old to pass the downgrade prevention system. I've been trying to flash what seems to be the latest firmware revision for this phone (OF1). Any ideas? Are the OSs I'm trying to flash somehow too new for the phone (even though I've tried all of the stock Lollipop ROMs. Should I give the phone back to my friend and tell him it's dead?
Thanks in advance!
I can't post images because I haven't posted here (or on any forum, for that matter) before.
Well, it seems really bad but you can try Samsung Smart Switch or Verizon Wireless Software Upgrade Assistant to repair the phone, else way JTag it's another option
Fuse 8 is OF1
Matthew M. said:
Fuse 8 is OF1
Click to expand...
Click to collapse
Thanks for the info. I tried flashing that version. Didn't work. I ended up taking my own broken S4 I had laying around, which had a smashed screen but a supposedly good Mainboard, and transferred the mainboard to my friend's bricked S4. Now it boots fully, and I made use of my old phone that was laying around.
BTW, do you know where or how you found out which version Fuse 8 represented? I'd like to learn more about this kind of stuff.
you probably needed to flash a lowship odin tar and repartition
Legitsu said:
you probably needed to flash a lowship odin tar and repartition
Click to expand...
Click to collapse
Sorry, what do you mean by "lowship"? I did use a PIT file to repartition, which didn't work, possibly because the OS being flashed with it wasn't being accepted...
evanzolman said:
Sorry, what do you mean by "lowship"? I did use a PIT file to repartition, which didn't work, possibly because the OS being flashed with it wasn't being accepted...
Click to expand...
Click to collapse
a normal odin tar will not fix a bad partition regardless of the .pit you need a tar that s a _user_Low_ship todo a full format odin was failing because the partitions where screwed and you weren't using the correct image
go to sammobile.com they have all the s4 all variants roms.
evanzolman said:
Thanks for the info. I tried flashing that version. Didn't work. I ended up taking my own broken S4 I had laying around, which had a smashed screen but a supposedly good Mainboard, and transferred the mainboard to my friend's bricked S4. Now it boots fully, and I made use of my old phone that was laying around.
BTW, do you know where or how you found out which version Fuse 8 represented? I'd like to learn more about this kind of stuff.
Click to expand...
Click to collapse
I am not aware of a definitive guide on the fuses. I found it by trial and error
Envoyé de mon SM-G903F en utilisant Tapatalk
Model: SM-G900T (T-MOBILE, USA, 16GB EDITION)
My Samsung Galaxy S5 is rooted. But I am not sure what caused my phone to get stuck in the bootloop. As I have been rooted for about 2 years and its been working fine. Also I was not manually installing any updates, mods or anything of the sort. Just tried to turn on my phone one day and it was stuck on the boot screen ( Samsung logo).
When I try to go to recovery mode I get the error:
Movinand checksum confirmation fail
If I try to install stock firm ware I get(odin):
There is no pit partition
If I try to install pit partition with the firmware or twrp I get(odin):
Complete (write) operation failed
Also whenever I try to flash with odin on my phone I get the error:
Mmc_read fail
Anyone know what might be the issue? Been tryingd to fix my phone fore quite awhile now.
Also sorry I didn't post any pictures! I'm going try and get 10 posts as quickly as I can so I can post some pictures.
Any advice is appreciated! Thanks!
-aj
ajxabstract said:
Model: SM-G900T (T-MOBILE, USA, 16GB EDITION)
My Samsung Galaxy S5 is rooted. But I am not sure what caused my phone to get stuck in the bootloop. As I have been rooted for about 2 years and its been working fine. Also I was not manually installing any updates, mods or anything of the sort. Just tried to turn on my phone one day and it was stuck on the boot screen ( Samsung logo).
When I try to go to recovery mode I get the error:
Movinand checksum confirmation fail
If I try to install stock firm ware I get(odin):
There is no pit partition
If I try to install pit partition with the firmware or twrp I get(odin):
Complete (write) operation failed
Also whenever I try to flash with odin on my phone I get the error:
Mmc_read fail
Anyone know what might be the issue? Been tryingd to fix my phone fore quite awhile now.
Also sorry I didn't post any pictures! I'm going try and get 10 posts as quickly as I can so I can post some pictures.
Any advice is appreciated! Thanks!
-aj
Click to expand...
Click to collapse
Do you want the good news or the bad news first?
The bad news- it's a hardware issue. And of course being a hardware issue there's no fixing it. Mmc stands for multimedia card. So your entire internal storage/partitions are probably dead.
The good news though- the s7 is out.......
Darn, is there a test to know if it is a hardware issue for sure? Im mostly worried about important data I still have on the phone. Is there at least some hope to recover it ?
-thanks
Aj
ajxabstract said:
Darn, is there a test to know if it is a hardware issue for sure? Im mostly worried about important data I still have on the phone. Is there at least some hope to recover it ?
-thanks
Aj
Click to expand...
Click to collapse
I can confirm it is indeed a hardware issue. An MMC read fail error means there was an error reading a file or files on the MMC chip. This could mean the entire storage chip is dead, or it could mean (and this is less likely based on the use patterns described) one or more parts of the chip were corrupted.
Either way, you won't be able to get anything off that phone, sorry. If you have an SD card in the phone, it should be fine.
If you're looking for new phones, I suggest a Nexus, they're easier to root and always get Android updates.
Hey Guys I'm new to this forum and apologies if this has been covered and would be grateful if someone to point me to the right direction. Link-drive.google.com/file/d/0BwqxONwTQDjiSkF3VWN0UmpFSHc/view?usp=sharing
So just briefly the problem at hand : I did an update to 6.0.1 and after this update my fone screen motion sensor stop working, didnt switch when i turn the fone side ways and also the games with motion requirement didnt work. So just recently there was an heartstone(Blizzard game update) I did the update the fone was working fine till i manually did a restart, thats when my s5 g906s went into bootloop. with a little distortion on the bottom right hand corner. Link-drive.google.com/file/d/0BwqxONwTQDjiSkF3VWN0UmpFSHc/view?usp=sharing
1.)I've already tried to restore it with kies3 manually added the S/N and IMEI it completes but same bootloop with a little distortion on the bottom right hand corner.
2.)I tried to go into recovery mode by pressing Power+Home+Volume Up but it wont enter that mode.
3.)I tried to Use Odin with the fone variant with full AP,BL,CP,CSC and pit ODIN loads all files and give me a PASS message but after this when the fone restarts it tries to go into recovering mode(top lefthand in blue) but it just turns off with a vibrate. Link - drive.google.com/file/d/0BwqxONwTQDjiVHV2RGxrSVRRNU0/view?usp=sharing
4.) So i though the recovery is faulty so i tried to flash a recovery unofficial_philz_touch_6.48.4-g906s_hsk.tar but i get this error
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
After this i read some threads saying I need root so i tried to flash from autoroot_chainfire_eu but same <ID:0/005> FAIL! (Auth) error.
Now im just stuck, what am i doing wrong? Please if someone can help me out a little would mean a great deal, thanks.
Create an account on Sammobile to get the firmware.
Use the Search to find the required firmware – enter your Galaxy S5 model number which you can find in Settings > More > About Device > Build Number.
Download the correct stock Android firmware file that matches with your SGS5 model.
Extract the contents of zip file and you would find a .tar.md5 file.
Also, download Odin 3.09 from here. Extract and save the files on your PC.
How to unbrick Samsung Galaxy S5:
Turn your Samsung Galaxy S5 off, remove battery and re-insert after some ten seconds.
Boot Galaxy S5 in Download Mode.
Launch Odin on your computer and connect your Galaxy S5 to PC using a USB cable.
Once successfully connected, click on the AP button on Odin.
Locate the .tar.md5 stock Android firmware file extracted earlier.
Don’t touch any other settings except ensuring that Re-partitioning is disabled.
Click on the START button to initiate the process.
After the flashing process is finished successfully, it will reboot and you will be able to set it up with your Gmail account
Dont forget to install phone drivers and use stock USB
Nirman Bhullar said:
Create an account on Sammobile to get the firmware.
Use the Search to find the required firmware – enter your Galaxy S5 model number which you can find in Settings > More > About Device > Build Number.
Download the correct stock Android firmware file that matches with your SGS5 model.
Extract the contents of zip file and you would find a .tar.md5 file.
Also, download Odin 3.09 from here. Extract and save the files on your PC.
How to unbrick Samsung Galaxy S5:
Turn your Samsung Galaxy S5 off, remove battery and re-insert after some ten seconds.
Boot Galaxy S5 in Download Mode.
Launch Odin on your computer and connect your Galaxy S5 to PC using a USB cable.
Once successfully connected, click on the AP button on Odin.
Locate the .tar.md5 stock Android firmware file extracted earlier.
Don’t touch any other settings except ensuring that Re-partitioning is disabled.
Click on the START button to initiate the process.
After the flashing process is finished successfully, it will reboot and you will be able to set it up with your Gmail account
Dont forget to install phone drivers and use stock USB
Click to expand...
Click to collapse
Ah, you beat me to it. Also OP, don't forget to boot into recovery and wipe the data otherwise you'll be stuck in another bootloop, I don't know why but I have to do this on all devices when flashing stock ROM.
RAZERZDAHACKER said:
Ah, you beat me to it. Also OP, don't forget to boot into recovery and wipe the data otherwise you'll be stuck in another bootloop, I don't know why but I have to do this on all devices when flashing stock ROM.
Click to expand...
Click to collapse
Actually I am not a pro but I think Odin do itself
perplexior said:
Hey Guys I'm new to this forum and apologies if this has been covered and would be grateful if someone to point me to the right direction. Link-drive.google.com/file/d/0BwqxONwTQDjiSkF3VWN0UmpFSHc/view?usp=sharing
So just briefly the problem at hand : I did an update to 6.0.1 and after this update my fone screen motion sensor stop working, didnt switch when i turn the fone side ways and also the games with motion requirement didnt work. So just recently there was an heartstone(Blizzard game update) I did the update the fone was working fine till i manually did a restart, thats when my s5 g906s went into bootloop. with a little distortion on the bottom right hand corner. Link-drive.google.com/file/d/0BwqxONwTQDjiSkF3VWN0UmpFSHc/view?usp=sharing
1.)I've already tried to restore it with kies3 manually added the S/N and IMEI it completes but same bootloop with a little distortion on the bottom right hand corner.
2.)I tried to go into recovery mode by pressing Power+Home+Volume Up but it wont enter that mode.
3.)I tried to Use Odin with the fone variant with full AP,BL,CP,CSC and pit ODIN loads all files and give me a PASS message but after this when the fone restarts it tries to go into recovering mode(top lefthand in blue) but it just turns off with a vibrate. Link - drive.google.com/file/d/0BwqxONwTQDjiVHV2RGxrSVRRNU0/view?usp=sharing
4.) So i though the recovery is faulty so i tried to flash a recovery unofficial_philz_touch_6.48.4-g906s_hsk.tar but i get this error
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
After this i read some threads saying I need root so i tried to flash from autoroot_chainfire_eu but same <ID:0/005> FAIL! (Auth) error.
Now im just stuck, what am i doing wrong? Please if someone can help me out a little would mean a great deal, thanks.
Click to expand...
Click to collapse
hai, i having same problem like you with my sm-g906s
before having this issue, my phone is working fine with with android 6.0.1 (PDA G906SKSU1CPF3 | build: 2016-07-10),
than 2 days ago i decided to upgrade it to (PDA G906SKSU1CPL1 | build: 2017-01-03), all the firmware i get from sam mobile.
odin process is working fine, and pass it until my phone showing my homescreen, and i can do anything even installing some aplication from playstore. just looks like it working fine, but im not tested all sensor with this firmware.
the problem is starting when i restart my phone, my phone is having bootloop, no recovery mode, and having same screen distortion like yours, in the bottom right corner.
after that i doing flash again, trying get back to G906SKSU1CPF3 version, but not working good. odin pass it, but bootloop issue still happen. after that, i trying download all android 6.01 and one version of 5.0.1 at sammobile, and flash it one by one, nothing work with my phone. trying to install twrp recovery with odin, is also not work. it confused me, because i dont know what im doing wrong
the phone work, after installing android 4.4.2 G906SKSU1ANFI | build: 2014-06-29. it can fix bootloop, and in this case, i can use my phone again, but with old firmware, screen distortion issue, and not working motion sensor..
installing twrp recovery 3.0.0-0 v4 can be done with odin with this 4.4.2 firmware, but twrp v5 and above is not working.
i get this recovery from https://forum.xda-developers.com/galaxy-s5/development/recovery-twrp-recovery-v2-8-7-0-t3199011
after that, i using twrp to wipe my phone, with hope it can fix the problem, but nothing happen even after wiping system, and reflash again 4.4.2 with odin. until now still having same problem, but at least i can use my phone
hope you discover better solution, and share with me, because im not sure this is hardware problem.
it sound like the recovery image is corrupted, try SmartSwitch, is a tool from Samsung. Use Emergency software recovery n Initialisation
akrambasyari said:
hai, i having same problem like you with my sm-g906s
before having this issue, my phone is working fine with with android 6.0.1 (PDA G906SKSU1CPF3 | build: 2016-07-10),
than 2 days ago i decided to upgrade it to (PDA G906SKSU1CPL1 | build: 2017-01-03), all the firmware i get from sam mobile.
odin process is working fine, and pass it until my phone showing my homescreen, and i can do anything even installing some aplication from playstore. just looks like it working fine, but im not tested all sensor with this firmware.
the problem is starting when i restart my phone, my phone is having bootloop, no recovery mode, and having same screen distortion like yours, in the bottom right corner.
after that i doing flash again, trying get back to G906SKSU1CPF3 version, but not working good. odin pass it, but bootloop issue still happen. after that, i trying download all android 6.01 and one version of 5.0.1 at sammobile, and flash it one by one, nothing work with my phone. trying to install twrp recovery with odin, is also not work. it confused me, because i dont know what im doing wrong
the phone work, after installing android 4.4.2 G906SKSU1ANFI | build: 2014-06-29. it can fix bootloop, and in this case, i can use my phone again, but with old firmware, screen distortion issue, and not working motion sensor..
installing twrp recovery 3.0.0-0 v4 can be done with odin with this 4.4.2 firmware, but twrp v5 and above is not working.
i get this recovery from https://forum.xda-developers.com/galaxy-s5/development/recovery-twrp-recovery-v2-8-7-0-t3199011
after that, i using twrp to wipe my phone, with hope it can fix the problem, but nothing happen even after wiping system, and reflash again 4.4.2 with odin. until now still having same problem, but at least i can use my phone
hope you discover better solution, and share with me, because im not sure this is hardware problem.
Click to expand...
Click to collapse
@akrambasyari
dear do u have the below mentioned firmware file? If u have, then kindly do share with me. I am facing too much trouble in downloading it from Sammobile.
File (PDA G906SKSU1CPL1 | build: 2017-01-03)
akrambasyari said:
hai, i having same problem like you with my sm-g906s
before having this issue, my phone is working fine with with android 6.0.1 (PDA G906SKSU1CPF3 | build: 2016-07-10),
than 2 days ago i decided to upgrade it to (PDA G906SKSU1CPL1 | build: 2017-01-03), all the firmware i get from sam mobile.
odin process is working fine, and pass it until my phone showing my homescreen, and i can do anything even installing some aplication from playstore. just looks like it working fine, but im not tested all sensor with this firmware.
the problem is starting when i restart my phone, my phone is having bootloop, no recovery mode, and having same screen distortion like yours, in the bottom right corner.
after that i doing flash again, trying get back to G906SKSU1CPF3 version, but not working good. odin pass it, but bootloop issue still happen. after that, i trying download all android 6.01 and one version of 5.0.1 at sammobile, and flash it one by one, nothing work with my phone. trying to install twrp recovery with odin, is also not work. it confused me, because i dont know what im doing wrong
the phone work, after installing android 4.4.2 G906SKSU1ANFI | build: 2014-06-29. it can fix bootloop, and in this case, i can use my phone again, but with old firmware, screen distortion issue, and not working motion sensor..
installing twrp recovery 3.0.0-0 v4 can be done with odin with this 4.4.2 firmware, but twrp v5 and above is not working.
i get this recovery from https://forum.xda-developers.com/galaxy-s5/development/recovery-twrp-recovery-v2-8-7-0-t3199011
after that, i using twrp to wipe my phone, with hope it can fix the problem, but nothing happen even after wiping system, and reflash again 4.4.2 with odin. until now still having same problem, but at least i can use my phone
hope you discover better solution, and share with me, because im not sure this is hardware problem.
Click to expand...
Click to collapse
Please check your pm box and see if the link helps you.
---------- Post added at 09:57 PM ---------- Previous post was at 09:55 PM ----------
ali.akbar01 said:
@akrambasyari
dear do u have the below mentioned firmware file? If u have, then kindly do share with me. I am facing too much trouble in downloading it from Sammobile.
File (PDA G906SKSU1CPL1 | build: 2017-01-03)
Click to expand...
Click to collapse
Please check your pm box. See if the link helps you.
I have a similar problem with my Sm-G906S too......
--------Post deleted as I have posted the solution I found on the following thread.------------
https://forum.xda-developers.com/ga...ner-thread-t2807639/post77083953#post77083953
Hello XDA im a new user here and i have a little big problem,
So my phone a samsung galaxy s6 edge g925fxxu6erd1. One day it decided to block itself at the samsung logo.So i got odin 3.13.3 and started looking for the firmware, at first i didnt new the full model name of the phone i knew only thats a g925fxxu6 so through trial and error i download 5 diffrent types of g925fxxu6 firmwares.
At first it gaved me write error ok i got another cable. The first 4 stoped at the system installation. The fifth gave me a hidden.img error. I read somewhere that u can get the full model name if u get into recovery mode but that didnt work because it gaved me an infinite system update thing.After that i observed that one of the firmwares had a csc file i flashed it and BOOM it was booting me into recoverymode. THEN i learned my full model name ok i downloaded it try to flash and it just stops everytime at boot.img changing ports check cable is the one that got me through till the hidden.img so check diffrent versions of odin check everything since 3.09 to 3.13.1 .
At this point im tyred and frustrated and i dont want to loose the phone because it was a gift( i didnt try to install or to flash anything like twrp and such before the problem occured i just put it to charg and when i got home it was in this state). Maybe its a hardware issue but idk the phone certenly charges. Can someone help me!
Update: i found m firmware with csc cp and bl for my model.
Velonzy said:
Hello XDA im a new user here and i have a little big problem,
So my phone a samsung galaxy s6 edge g925fxxu6erd1. One day it decided to block itself at the samsung logo.So i got odin 3.13.3 and started looking for the firmware, at first i didnt new the full model name of the phone i knew only thats a g925fxxu6 so through trial and error i download 5 diffrent types of g925fxxu6 firmwares.
At first it gaved me write error ok i got another cable. The first 4 stoped at the system installation. The fifth gave me a hidden.img error. I read somewhere that u can get the full model name if u get into recovery mode but that didnt work because it gaved me an infinite system update thing.After that i observed that one of the firmwares had a csc file i flashed it and BOOM it was booting me into recoverymode. THEN i learned my full model name ok i downloaded it try to flash and it just stops everytime at boot.img changing ports check cable is the one that got me through till the hidden.img so check diffrent versions of odin check everything since 3.09 to 3.13.1 .
At this point im tyred and frustrated and i dont want to loose the phone because it was a gift( i didnt try to install or to flash anything like twrp and such before the problem occured i just put it to charg and when i got home it was in this state). Maybe its a hardware issue but idk the phone certenly charges. Can someone help me!
Update: i found m firmware with csc cp and bl for my model.
Click to expand...
Click to collapse
Who gives a s***t just get the TWRP for your model flash it in AP slot odin get lineageos for your phone model and flash it in TWRP.Boom you have a better cleaner android.The Samsung firmware downloading is a Headache as speed is not good and it sometimes have holes in it.Sometimes you mess things up but With TWRP and lineage you rarely run into problems.I can promise you after Lineage you would love your device.Be sure to Check Gapps for Google apps and Some custom kernels stuff.The speed is great in Lineage along with stability,secuirity,updates and Privacy.
Sent from my Pixel 3 XL using Tapatalk