Hello,
i am seeking help with my mediapad m5 (10,8 inch) which is stuck in a bootloop.
My Bootloader is locked, FRP is Locked. I am stucked in a bootloop.
The method by pressing Volume + and - and power to flash a UPDATE.APP via the sdcard dont work. Always fail.
The method with eRecovery dont work, it tells me it fails parsing the package.
I cant flash any .img because my bootloader is locked.
Everytime i download a firmware it shows me CMR-AL09C000 instead of CMR-AL09C432 which would be EU firmware.
On firmware finder it shows the correct one and then when i flash it, it fails.
I even used a payed unlock service which worked and let me flash a firmware but it still didnt worked out.
Maybe anyone here has a idea what i could do?
Many thanks in advance
Have you called Huawei customer service to see what they advise you do?
Sent from my SHT-W09 using Tapatalk
Maybe anyone has a TWRP Backup of a EU, 10,8 inch MediaPad M5 LTE and can share with me.
What caused your bootloop? If you used a paid unlock service, why is your bootloader still locked?
When I bootlooped my SHT AL-09, Funky Huawei's eRecovery method is basically all that worked for me. But Funky Huawei charges to use it. There may be better ways and/or free ways to recover - just letting you know that it's an option.
@MirageBlader
What you do that your device now in bootloop?
What your build before you have bootloop?
Share TWRP-Backup not work if FRP lock and Bootloader lock.
JamesBott said:
@MirageBlader
What you do that your device now in bootloop?
What your build before you have bootloop?
Share TWRP-Backup not work if FRP lock and Bootloader lock.
Click to expand...
Click to collapse
Well, I was some how stupid. I got the device, I unlocked it and root it. While rooting and patching my boot.img I must have taken the wrong update file (it stated it was correct but It wasn't). After that the struggle started. I wanted to flash a clean system to start over. Downloaded with HuaweiFirmwareFinder the correct firmware and flashed it via fastboot. Then the bootloop happens. It boots, shows the Huawei logo, after that it reboots into recovery.
FRP is locked and Bootloader Unlocked. I even tried to unlock FRP via DC-unlock and payed for it. Flashed the hole system image but it didn't helped.
I had CMR-AL09C432B151 if I remember correctly. Latest unbranded EU firmware ATM.
Sent from my HTC U12+ using Tapatalk
Quick Update: I managed to fix the bootloop and reinstall the latest Firmware (CMR-AL09C432B151).
MirageBlader said:
Quick Update: I managed to fix the bootloop and reinstall the latest Firmware (CMR-AL09C432B151).
Click to expand...
Click to collapse
Would you mind sharing what you did to fix your bootloop?
Mine is in a loop too (CMR-W09) and so far I've been unsuccessful. I even paid for dc-phoenix, and while it flashes everything oke, the device still bootloops.
droidvark said:
Would you mind sharing what you did to fix your bootloop?
Mine is in a loop too (CMR-W09) and so far I've been unsuccessful. I even paid for dc-phoenix, and while it flashes everything oke, the device still bootloops.
Click to expand...
Click to collapse
Is your Bootloader and OEM unlocked?
Gesendet von meinem HTC 10 mit Tapatalk
MirageBlader said:
Is your Bootloader and OEM unlocked?
Gesendet von meinem HTC 10 mit Tapatalk
Click to expand...
Click to collapse
Yes it is.
Related
I flashed my phone with kate_global_images_7.5.19_20170519.0000.00_6.0_global in order to unlock the bootloader via mi unlock. The phone has successfully connected to mi cloud and can be located on the i.mi.com website. If I go into developer options and tap on the button to bind the phone to my account for unlocking it just keeps telling me to try again in another couple of minutes. This seems to be a really common problem and I haven't been able to find a solution. Any ideas? Thanks.
Same here. Been waiting for 5 days now after getting permission. Still fails to bind. This whole official unlock way is a total POS. It even says after you are granted permission you can unlock right away but that's not true at all. I also have SE and dev rom btw.
maybe try to flash miui 8 via fastboot..
i used fastboot rom miui 8 , miflash (not xiaomiflash) ver 2016, and unlock ver 1.1..
Augesvarer said:
maybe try to flash miui 8 via fastboot..
i used fastboot rom miui 8 , miflash (not xiaomiflash) ver 2016, and unlock ver 1.1..
Click to expand...
Click to collapse
MIUI 8 what? The dev rom 7.x is MIUI 8. Do you mean dev or stable? I was on MIUI 8 stable before but it didn't help.
my issues, evrytime i flashed miui rom, my imei isn't showing up (i need to official unlock to flash lastest los)
i tried some rom dev 7.x.x.x , but i cant login mi account via wifi.
then, i flashed this rom with miflash 2016 (mine is kenzo)
http://en.miui.com/thread-439892-1-1.html
and it works, i can unlock my phone without imei..
Augesvarer said:
my issues, evrytime i flashed miui rom, my imei isn't showing up (i need to official unlock to flash lastest los)
i tried some rom dev 7.x.x.x , but i cant login mi account via wifi.
then, i flashed this rom with miflash 2016 (mine is kenzo)
http://en.miui.com/thread-439892-1-1.html
and it works, i can unlock my phone without imei..
Click to expand...
Click to collapse
I think the "can not bind" problem is specific to Kate. The IMEI problem with your Kenzo phone is probably a separate issue.
dwl99 said:
I flashed my phone with kate_global_images_7.5.19_20170519.0000.00_6.0_global in order to unlock the bootloader via mi unlock. The phone has successfully connected to mi cloud and can be located on the i.mi.com website. If I go into developer options and tap on the button to bind the phone to my account for unlocking it just keeps telling me to try again in another couple of minutes. This seems to be a really common problem and I haven't been able to find a solution. Any ideas? Thanks.
Click to expand...
Click to collapse
Try this
https://forum.xda-developers.com/redmi-note-3/how-to/successfully-officially-unlocked-redmi-t3543150
it work perfectly and i have successfully unlock my kate and flash latest LOS.
abe_long said:
Try this
https://forum.xda-developers.com/redmi-note-3/how-to/successfully-officially-unlocked-redmi-t3543150
it work perfectly and i have successfully unlock my kate and flash latest LOS.
Click to expand...
Click to collapse
Thanks for the reply but I need to have the latest dev ROM to allow LineageOS to flash - it checks for the most recent firmware.
dwl99 said:
Thanks for the reply but I need to have the latest dev ROM to allow LineageOS to flash - it checks for the most recent firmware.
Click to expand...
Click to collapse
Yes i know.first you use the older version miui to unlock the bootloader.after that just reflash to latest dev rom.make sure you checked CLEAN ALL.it will not lock your bootloader.
abe_long said:
Yes i know.first you use the older version miui to unlock the bootloader.after that just reflash to latest dev rom.make sure you checked CLEAN ALL.it will not lock your bootloader.
Click to expand...
Click to collapse
Thanks, I tried this but got stuck in a bootloop.
dwl99 said:
Thanks, I tried this but got stuck in a bootloop.
Click to expand...
Click to collapse
At which step does the bootloop come..?i also having bootloop after flash the twrp but it can be solve by flash the lazy flash zip
abe_long said:
At which step does the bootloop come..?i also having bootloop after flash the twrp but it can be solve by flash the lazy flash zip
Click to expand...
Click to collapse
I flashed kate_global_images_6.7.14_20160629.0000.25_6.0_global_1b43c8f07f and then started to get bootloops. I didn't get as far as flashing TWRP.
dwl99 said:
I flashed kate_global_images_6.7.14_20160629.0000.25_6.0_global_1b43c8f07f and then started to get bootloops. I didn't get as far as flashing TWRP.
Click to expand...
Click to collapse
After flash,try to wipe data and cache in recovery.then reboot your device.if after 5 min still looping,try to force reboot.
abe_long said:
After flash,try to wipe data and cache in recovery.then reboot your device.if after 5 min still looping,try to force reboot.
Click to expand...
Click to collapse
I thought of that but I couldn't get the phone to boot into recovery - Power and Vol+ opened a screen with a picture of the phone with a cable being plugged into it rather than recovery
dwl99 said:
I think the "can not bind" problem is specific to Kate. The IMEI problem with your Kenzo phone is probably a separate issue.
Click to expand...
Click to collapse
Just try unlocking via mi unlock and tell us ignore the message
Androbots said:
Just try unlocking via mi unlock and tell us ignore the message
Click to expand...
Click to collapse
Doesn't work - complains that the deivice isn't bound to the account
There is no point trying anything. Nothing works. I have a 3 month long email chain with xiaomi support, which ended by them saying I should contact the direct seller. Basically they washed their hands. I ended up sending my device to a guy, who has a xiaomi service licence, and he managed to unlock it officially with his code.
If you cannot bind your account and device for two weeks with multiple tries, you should just give up on the "mainstream" unlock procedure. It will never work, and the only thing that comes out of it is slowly bulding rage.
It's not worth it.
smash1986hu said:
There is no point trying anything. Nothing works. I have a 3 month long email chain with xiaomi support, which ended by them saying I should contact the direct seller. Basically they washed their hands. I ended up sending my device to a guy, who has a xiaomi service licence, and he managed to unlock it officially with his code.
If you cannot bind your account and device for two weeks with multiple tries, you should just give up on the "mainstream" unlock procedure. It will never work, and the only thing that comes out of it is slowly bulding rage.
It's not worth it.
Click to expand...
Click to collapse
Sounds like good advice. My Note 4 has arrived now so I think I'll just flash the stock MIUI ROM & ebay it.
smash1986hu said:
which ended by them saying I should contact the direct seller
Click to expand...
Click to collapse
What if I bought it directly from their online store? Do I contact them back?
Good day everyone. I am hoping I can get some help here on a problem that has been bothering me for weeks. I have the KIW-L21 phone, and I recently did an OTA update on the phone, but it got stuck on Honor when booting and never went past it. No matter what I did, it won't move and factory reset failed. So, I went to Honor support website and downloaded the "Update.app" files for UK, France, and Europe General for it. So, far when I flash the UK and General Europe, it goes well, but then I get this screen (image attached) and it keep looping on optimizing Device from 0 to 100 and again. http://i66.tinypic.com/o586d1.jpg
http://i64.tinypic.com/34z0jdi.jpg
http://i66.tinypic.com/igewk2.jpg
The French Update.app won't even work. But I am stuck here. These are all official ROMs from Huawei's website. I wonder what am doing wrong.
Please any sort of help is appreciated.
Thanks.
Is your phone still under warranty?
I am afraid Not
chrisleLP said:
Is your phone still under warranty?
Click to expand...
Click to collapse
I am afraid Not. Are you saying there is no hope for it?
I have read where someone had the same issue, but it still booted up fine, but just always showed the screen first. I was hoping this would be the case.
Damionix said:
I am afraid Not. Are you saying there is no hope for it?
I have read where someone had the same issue, but it still booted up fine, but just always showed the screen first. I was hoping this would be the case.
Click to expand...
Click to collapse
Cheer up. I'm not saying that. Can you boot to erecovery?
Yes
chrisleLP said:
Cheer up. I'm not saying that. Can you boot to erecovery?
Click to expand...
Click to collapse
I can boot into Factory Recovery. The Phone has never been rooted or messed with. Everything is still stock.
Damionix said:
I can boot into Factory Recovery. The Phone has never been rooted or messed with. Everything is still stock.
Click to expand...
Click to collapse
Did you download correct firmware according to your build number...?
I believe I did
hassanjavaid8181 said:
Did you download correct firmware according to your build number...?
Click to expand...
Click to collapse
I believe I did, but just to be on the safe side, I will tell you what I did. I looked on the back of the Phone, as I am unable to back into the Phone, and saw KIW-L21, and just before that it said QISKIW-L21.
Damionix said:
I can boot into Factory Recovery. The Phone has never been rooted or messed with. Everything is still stock.
Click to expand...
Click to collapse
Erecovery is the secondary recovery. There is an option there that will download and flash the latest available firmware. If after reflashing again, the problem still exist. I'm afraid yhis might be a hardware problem.
Damionix said:
I believe I did, but just to be on the safe side, I will tell you what I did. I looked on the back of the Phone, as I am unable to back into the Phone, and saw KIW-L21, and just before that it said QISKIW-L21.
Click to expand...
Click to collapse
No build number will be visible in settings/about..or on the box of the phone
Kiw-l21 has 2 version
Kiw-l21c185 middle east variant
Kiw-l21c432
Which one is yours?
What number firmware you were on before your issue??
This One
hassanjavaid8181 said:
No build number will be visible in settings/about..or on the box of the phone
Kiw-l21 has 2 version
Kiw-l21c185 middle east variant
Kiw-l21c432
Which one is yours?
What number firmware you were on before your issue??
Click to expand...
Click to collapse
DC - Unlocker 2 Client 1.00.1381
Detecting phone :
selection :
manufacturer - Huawei phones
model - Huawei phone in fastboot mode
Found Phone : MSM8916 for arm64
Model : Huawei phone in fastboot mode
Firmware : KIW-L21C432B140
NULL
FB LockState: LOCKED
widevine LockState: LOCKED
Bootloader Lock State: LOCKED
Root State: UNROOT
Bootloader WidevineKey: WidevineKey_NOTSET
System State: OK
Bootloader Version: 001.001.000
Battery state: battery is present
That is what I get from DC-Unlock Software
Damionix said:
DC - Unlocker 2 Client 1.00.1381
Detecting phone :
selection :
manufacturer - Huawei phones
model - Huawei phone in fastboot mode
Found Phone : MSM8916 for arm64
Model : Huawei phone in fastboot mode
Firmware : KIW-L21C432B140
NULL
FB LockState: LOCKED
widevine LockState: LOCKED
Bootloader Lock State: LOCKED
Root State: UNROOT
Bootloader WidevineKey: WidevineKey_NOTSET
System State: OK
Bootloader Version: 001.001.000
Battery state: battery is present
That is what I get from DC-Unlock Software
Click to expand...
Click to collapse
May be this firmware can help you..
http://huawei-firmware.com/rom/huawei-honor-5x/kiwl21/1298
hassanjavaid8181 said:
May be this firmware can help you..
http://huawei-firmware.com/rom/huawei-honor-5x/kiwl21/1298
Click to expand...
Click to collapse
Thank You very much. I will give it a try and let you know how it goes. I appreciate all the help.
Same Thing
hassanjavaid8181 said:
May be this firmware can help you..
http://huawei-firmware.com/rom/huawei-honor-5x/kiwl21/1298
Click to expand...
Click to collapse
Good Morning. I tried that and it didn't work either
Same thing. It flashes fine, then colored screen, and it gets stuck on Honor Splash Screen.
ERecovery
chrisleLP said:
Erecovery is the secondary recovery. There is an option there that will download and flash the latest available firmware. If after reflashing again, the problem still exist. I'm afraid yhis might be a hardware problem.
Click to expand...
Click to collapse
Could you please walk me through this erecovery process?
Damionix said:
Could you please walk me through this erecovery process?
Click to expand...
Click to collapse
Plug in your phone and boot to fastboot. In the console, type:
Code:
adb reboot recovery2
After that, select the first option.
Issue Resolved
I was able to use DC-Phoenix to flash a Factory Firmware, did an Upgrade Flash, and repair IMEI. I am now good to go. Thanks guys for all your input. I really appreciate it.
Damionix said:
I was able to use DC-Phoenix to flash a Factory Firmware, did an Upgrade Flash, and repair IMEI. I am now good to go. Thanks guys for all your input. I really appreciate it.
Click to expand...
Click to collapse
Glad you fixed your device..
Damionix said:
I was able to use DC-Phoenix to flash a Factory Firmware, did an Upgrade Flash, and repair IMEI. I am now good to go. Thanks guys for all your input. I really appreciate it.
Click to expand...
Click to collapse
Wow. Happy for you.
i have same problem here,flash firmwares in fastboot and in upgrade mode but no lucky,can you help me
have also problem in honor 5x kiw-l22 after flash i got multi colour but i can flash it through sd and fastboot mod on fastboot flash falid after that i connect on chimra tool i am getting model kiw-al10
I have the Chinese variant of the mate 10 pro. I unlocked the bootloader then flashed a trebel rom. All went well, it rebooted fine and I enabled adb deugging. I booted back into the bootloader then flashed the root thing. Now it doesn't boot and just goes to the Huawei e recovery thing. I tried restoring to stock but it says package parsing failed. What do I do?
I can still get into recovery
Search for funkyhuawei thread in xda and buy credits and you can restore.
Sadly you will have to pay funky Huawei it's expensive but helped me a lot.
0alfred0 said:
Sadly you will have to pay funky Huawei it's expensive but helped me a lot.
Click to expand...
Click to collapse
Uh I can still get into recovery...
How much does it cost....
b50corei5 said:
Uh I can still get into recovery...
How much does it cost....
Click to expand...
Click to collapse
Did you try flashing stock SYSTEM.img for your build?
As long as fastboot says Phone unlock and FRP unlock it should be fixable.
Post your firmware: BLA-LxxCxxxBxxx
Or follow this guide if you haven't tried it already: https://forum.xda-developers.com/mate-10/how-to/guide-extracting-stock-firmware-files-t3756733
ante0 said:
Did you try flashing stock SYSTEM.img for your build?
As long as fastboot says Phone unlock and FRP unlock it should be fixable.
Post your firmware: BLA-LxxCxxxBxxx
Or follow this guide if you haven't tried it already: https://forum.xda-developers.com/mate-10/how-to/guide-extracting-stock-firmware-files-t3756733
Click to expand...
Click to collapse
Yay it says those things. Thanks so much I almost bought those credits
b50corei5 said:
Yay it says those things. Thanks so much I almost bought those credits
Click to expand...
Click to collapse
If it shouldn't work with just flashing SYSTEM you could still use HWOTA (https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814) to update/reinstall firmware, which is free.
No need to use Funky unless you're Phone locked and/or frp lock (and even then I think dc unlocker is cheaper)
Hello, I have bricked my phone. After manually and successfully upgrade to EMUI 9 everything works fine but when I tried to uninstall Magisk and relock the bootloader something goes wrong and now I have a useless phone.
I Tried to flash a new ROM with DC Phoenix, the result is "device not supported"
DC Phoenix:
Looking for a device in force upgrade mode
No devices detected in force upgrade mode
Looking for a device in fastboot mode
Device found: GAB7N18305005133
08-10-2018 23:42:48 Starting to write device in FASTBOOT mode...
File to update: BLA-AL00B-BD_1.0.0.36_Board_Software_Android_8.0.0_EMUI_8.0.0_05022FPT.dgtks
Device found: GAB7N18305005133
Cannot get IMEI from device
Build number: :BLA-LGRP2-OVS 9.0.0.108(log)
Product model: BLA-L09
Device not supported
Now I would like to try with Huawei Update Extractor and flash via fastboot the necessary and appropriate images. However, I'm not sure what images I should flash. I understand that in EMUI 9.0 the partitions changed.
I will greatly appreciate your help.
I Forgot to mention that I have bootloader and FRP Unlocked.
Redicom said:
Hello, I have bricked my phone. After manually and successfully upgrade to EMUI 9 everything works fine but when I tried to uninstall Magisk and relock the bootloader something goes wrong and now I have a useless phone.
I Tried to flash a new ROM with DC Phoenix, the result is "device not supported"
DC Phoenix:
Looking for a device in force upgrade mode
No devices detected in force upgrade mode
Looking for a device in fastboot mode
Device found: GAB7N18305005133
08-10-2018 23:42:48 Starting to write device in FASTBOOT mode...
File to update: BLA-AL00B-BD_1.0.0.36_Board_Software_Android_8.0.0_EMUI_8.0.0_05022FPT.dgtks
Device found: GAB7N18305005133
Cannot get IMEI from device
Build number: :BLA-LGRP2-OVS 9.0.0.108(log)
Product model: BLA-L09
Device not supported
Now I would like to try with Huawei Update Extractor and flash via fastboot the necessary and appropriate images. However, I'm not sure what images I should flash. I understand that in EMUI 9.0 the partitions changed.
I will greatly appreciate your help.
I Forgot to mention that I have bootloader and FRP Unlocked.
Click to expand...
Click to collapse
Id ask funkyhuawei.club for help.
Sent from my CLT-L29 using Tapatalk
KevinAce said:
Id ask funkyhuawei.club for help.
Sent from my CLT-L29 using Tapatalk
Click to expand...
Click to collapse
I already did it, but it was impossible to use the FH erecovery tool despite correctly configuring the DNS..........I only lost US$30
Redicom said:
I already did it, but it was impossible to use the FH erecovery tool despite correctly configuring the DNS..........I only lost US$30
Click to expand...
Click to collapse
Did you ask him for help
Sent from my CLT-L29 using Tapatalk
KevinAce said:
Did you ask him for help
Sent from my CLT-L29 using Tapatalk
Click to expand...
Click to collapse
Yes, I did, unfortunately I did not get much help from them.
Flash system. Ramdisk is kept in system.
ante0 said:
Flash system. Ramdisk is kept in system.
Click to expand...
Click to collapse
Thanks......Problem solved, I flashed Kernel partition via fastboot and the phone is working 100%
Hello,
my MI 10 hangs in a boot loop. The device starts only in the recovery. It stays for some minutes in recovery and then it boots new again into recovery.
Flashing is not possible, because the Bootloader is locked.
And the next problem is,, that i do not want to lost my Data.
The important Thinig for me is to rescue the User Data.
Is this possible?
Is it poosible to save the User Data from MI Recovery? Because the MI PC Suite do not work with the MI 10.
Can someone help me?
Profirudi said:
Hello,
my MI 10 hangs in a boot loop. The device starts only in the recovery. It stays for some minutes in recovery and then it boots new again into recovery.
Flashing is not possible, because the Bootloader is locked.
And the next problem is,, that i do not want to lost my Data.
The important Thinig for me is to rescue the User Data.
Is this possible?
Is it poosible to save the User Data from MI Recovery? Because the MI PC Suite do not work with the MI 10.
Can someone help me?
Click to expand...
Click to collapse
If the device's state is exactly like u mentioned with locked bootloader, then EDL will be your only savior
LinhBT said:
If the device's state is exactly like u mentioned with locked bootloader, then EDL will be your only savior
Click to expand...
Click to collapse
But with EDL Flashing all User Data will be erased. Is that right?
Profirudi said:
But with EDL Flashing all User Data will be erased. Is that right?
Click to expand...
Click to collapse
I'm afraid that in this situation you will not be able to keep the data
LinhBT said:
I'm afraid that in this situation you will not be able to keep the data
Click to expand...
Click to collapse
Do you think it is possible to safe the Data for a professional Data Rescue Service?
The Hardware is not important for me. Only the Data.
Profirudi said:
Do you think it is possible to safe the Data for a professional Data Rescue Service?
The Hardware is not important for me. Only the Data.
Click to expand...
Click to collapse
Yep, I think the Pro Data Rescue Services will totally able to save the Data for you. It's doable - theoretically.
Good luck for your data
But i am thinking how any locked bootloader device can go into boot loop, without doing any wrong to it
Just saying
mong786 said:
Good luck for your data
But i am thinking how any locked bootloader device can go into boot loop, without doing any wrong to it
Just saying
Click to expand...
Click to collapse
I did made a mistake by flashing the stock firm in EDL ( therefore, the unlocked bootloader will be replaced by the original one, locked ). But lucky me, it was an OnePlus 9 Global
mong786 said:
Good luck for your data
But i am thinking how any locked bootloader device can go into boot loop, without doing any wrong to it
Just saying
Click to expand...
Click to collapse
The exact same thing happened to my factory Mi10. It went into boot loop for no apparent reason and now I have a locked bootloader and am desperate to save my data, which has the only video of a deceased relative. So far nothing has worked and I need some help
LinhBT said:
I did made a mistake by flashing the stock firm in EDL ( therefore, the unlocked bootloader will be replaced by the original one, locked ). But lucky me, it was an OnePlus 9 Global
Click to expand...
Click to collapse
No no no
Flashing in edl don't replace or lock bootloader
If it's unlocked
mong786 said:
No no no
Flashing in edl don't replace or lock bootloader
If it's unlocked
Click to expand...
Click to collapse
I think it depends on which tool and firm u used to flash?
LinhBT said:
I think it depends on which tool and firm u used to flash?
Click to expand...
Click to collapse
Mi flash tool with "authorized account" (required for latest snapdragon devices) to flash in edl mode with option "lock" will relock the bootloader
Otherwise all other options available to flash in edl mode will not relock bootloader, as i know