Hello, I have bricked my phone. After manually and successfully upgrade to EMUI 9 everything works fine but when I tried to uninstall Magisk and relock the bootloader something goes wrong and now I have a useless phone.
I Tried to flash a new ROM with DC Phoenix, the result is "device not supported"
DC Phoenix:
Looking for a device in force upgrade mode
No devices detected in force upgrade mode
Looking for a device in fastboot mode
Device found: GAB7N18305005133
08-10-2018 23:42:48 Starting to write device in FASTBOOT mode...
File to update: BLA-AL00B-BD_1.0.0.36_Board_Software_Android_8.0.0_EMUI_8.0.0_05022FPT.dgtks
Device found: GAB7N18305005133
Cannot get IMEI from device
Build number: :BLA-LGRP2-OVS 9.0.0.108(log)
Product model: BLA-L09
Device not supported
Now I would like to try with Huawei Update Extractor and flash via fastboot the necessary and appropriate images. However, I'm not sure what images I should flash. I understand that in EMUI 9.0 the partitions changed.
I will greatly appreciate your help.
I Forgot to mention that I have bootloader and FRP Unlocked.
Redicom said:
Hello, I have bricked my phone. After manually and successfully upgrade to EMUI 9 everything works fine but when I tried to uninstall Magisk and relock the bootloader something goes wrong and now I have a useless phone.
I Tried to flash a new ROM with DC Phoenix, the result is "device not supported"
DC Phoenix:
Looking for a device in force upgrade mode
No devices detected in force upgrade mode
Looking for a device in fastboot mode
Device found: GAB7N18305005133
08-10-2018 23:42:48 Starting to write device in FASTBOOT mode...
File to update: BLA-AL00B-BD_1.0.0.36_Board_Software_Android_8.0.0_EMUI_8.0.0_05022FPT.dgtks
Device found: GAB7N18305005133
Cannot get IMEI from device
Build number: :BLA-LGRP2-OVS 9.0.0.108(log)
Product model: BLA-L09
Device not supported
Now I would like to try with Huawei Update Extractor and flash via fastboot the necessary and appropriate images. However, I'm not sure what images I should flash. I understand that in EMUI 9.0 the partitions changed.
I will greatly appreciate your help.
I Forgot to mention that I have bootloader and FRP Unlocked.
Click to expand...
Click to collapse
Id ask funkyhuawei.club for help.
Sent from my CLT-L29 using Tapatalk
KevinAce said:
Id ask funkyhuawei.club for help.
Sent from my CLT-L29 using Tapatalk
Click to expand...
Click to collapse
I already did it, but it was impossible to use the FH erecovery tool despite correctly configuring the DNS..........I only lost US$30
Redicom said:
I already did it, but it was impossible to use the FH erecovery tool despite correctly configuring the DNS..........I only lost US$30
Click to expand...
Click to collapse
Did you ask him for help
Sent from my CLT-L29 using Tapatalk
KevinAce said:
Did you ask him for help
Sent from my CLT-L29 using Tapatalk
Click to expand...
Click to collapse
Yes, I did, unfortunately I did not get much help from them.
Flash system. Ramdisk is kept in system.
ante0 said:
Flash system. Ramdisk is kept in system.
Click to expand...
Click to collapse
Thanks......Problem solved, I flashed Kernel partition via fastboot and the phone is working 100%
Related
Hi guys I need your help.
I just got my Redmi Note 3 Pro 32GB. It was on official China ROM from what I know. I tried to unlock the bootloader without permission using this guide http://en.miui.com/thread-235865-1-1.html but when I flashed the ROM using MiFlash I got an error. I later restarted the phone and then all of a sudden my WLAN, Bluetooth and SIM would not work at all. So I tried again and now I get this error saying (Reached end of file... Receiving Hello Packets).
I can't flash a ROM from MiSuite through recovery as it always says it fails.
I'm at a loss here stressing out for days trying to get this to work and install CM13 on it. Was really excited but now this phone kind of pisses me off everytime I look at it. If I could fix the problems and flash CM13, this would be a great phone. Guess after this I'll probably not purchase another Xiaomi, nightmare to unlock and stuff.
All your help is appreciated. Thanks!
Try use Miflash too to wipe it with latest beta or stable rom.
Kevinwith4y said:
Hi guys I need your help.
I just got my Redmi Note 3 Pro 32GB. It was on official China ROM from what I know. I tried to unlock the bootloader without permission using this guide http://en.miui.com/thread-235865-1-1.html but when I flashed the ROM using MiFlash I got an error. I later restarted the phone and then all of a sudden my WLAN, Bluetooth and SIM would not work at all. So I tried again and now I get this error saying (Reached end of file... Receiving Hello Packets).
I can't flash a ROM from MiSuite through recovery as it always says it fails.
I'm at a loss here stressing out for days trying to get this to work and install CM13 on it. Was really excited but now this phone kind of pisses me off everytime I look at it. If I could fix the problems and flash CM13, this would be a great phone. Guess after this I'll probably not purchase another Xiaomi, nightmare to unlock and stuff.
All your help is appreciated. Thanks!
Click to expand...
Click to collapse
Unlock your bootloader, then open your phone in fastboot mode. miflash works in fastboot mode too. Flash your phone. If the wifi problem is still present, then flash a radio package. PM me i will send the link if the problem is still present.
Archit9169 said:
Unlock your bootloader, then open your phone in fastboot mode. miflash works in fastboot mode too. Flash your phone. If the wifi problem is still present, then flash a radio package. PM me i will send the link if the problem is still present.
Click to expand...
Click to collapse
Okay I'll try to unlock officially cause I can't for any reason do it unofficially cause of that Hello Packet error. Waiting for the code
Flashed new global Beta and unlocked just fine.
Archit9169 said:
Unlock your bootloader, then open your phone in fastboot mode. miflash works in fastboot mode too. Flash your phone. If the wifi problem is still present, then flash a radio package. PM me i will send the link if the problem is still present.
Click to expand...
Click to collapse
Well applied for official unlock and when trying to unlock it couldn't verify the device cause I have to MiAccount on my redmi note 3. I can't log in to one on my device because I want get any network on it. So I guess I'm screwed here huh.
Kevinwith4y said:
Well applied for official unlock and when trying to unlock it couldn't verify the device cause I have to MiAccount on my redmi note 3. I can't log in to one on my device because I want get any network on it. So I guess I'm screwed here huh.
Click to expand...
Click to collapse
Download the latest miflash. Try to flash a fastboot rom via edl mode. Ise 64 bit os. Make sure driver signature is disabled. Once you have properly flashed the rom, open miunlocl and then proceed normally.
When i revert back to miui from cm13, i encountered network and wifi problem. I unlocked bootloader via unlocktool and it unlocked like a charm.
Archit9169 said:
Download the latest miflash. Try to flash a fastboot rom via edl mode. Ise 64 bit os. Make sure driver signature is disabled. Once you have properly flashed the rom, open miunlocl and then proceed normally.
When i revert back to miui from cm13, i encountered network and wifi problem. I unlocked bootloader via unlocktool and it unlocked like a charm.
Click to expand...
Click to collapse
Just tried that again. Whenever I use miflash I get error receiving hello packet. On miflash beta I get cannot read COM port.
I've disabled the driver signatures.
Qualcomm drivers and phone drivers are all installed correctly. Just nothing is working
Kevinwith4y said:
Just tried that again. Whenever I use miflash I get error receiving hello packet. On miflash beta I get cannot read COM port.
I've disabled the driver signatures.
Qualcomm drivers and phone drivers are all installed correctly. Just nothing is working
Click to expand...
Click to collapse
Try using windows 7. It has higher success rate. Also try to download some other version of fastboot rom. Maybe the rom has problems. As for your network and wifi related problem, it can be fixed by flashing a different nonhlos.bin file
Archit9169 said:
Try using windows 7. It has higher success rate. Also try to download some other version of fastboot rom. Maybe the rom has problems. As for your network and wifi related problem, it can be fixed by flashing a different nonhlos.bin file
Click to expand...
Click to collapse
How do I flash that file? Do I need to be unlocked first?
Kevinwith4y said:
How do I flash that file? Do I need to be unlocked first?
Click to expand...
Click to collapse
Unfortunately, yes you have to unlock first. Keep trying the edl mode. I am sure its either software problem or windows problem.
Archit9169 said:
Unfortunately, yes you have to unlock first. Keep trying the edl mode. I am sure its either software problem or windows problem.
Click to expand...
Click to collapse
Alright. Currently trying will tell you how it goes.
Archit9169 said:
Unfortunately, yes you have to unlock first. Keep trying the edl mode. I am sure its either software problem or windows problem.
Click to expand...
Click to collapse
Not going well man. Still same problems no matter the ROM. If I try the same method on fastboot they tell me the bootloader is locked. I don't have access to another PC so I can't really try out. Looks like I'm all out of options and this phone is pretty much a brick. Maybe I'll buy another one and try again but... goddamn
Kevinwith4y said:
Not going well man. Still same problems no matter the ROM. If I try the same method on fastboot they tell me the bootloader is locked. I don't have access to another PC so I can't really try out. Looks like I'm all out of options and this phone is pretty much a brick. Maybe I'll buy another one and try again but... goddamn
Click to expand...
Click to collapse
As long as you phone does not have any hardware fault and can boot in either edl mode or fastnoot mode, then it can be repaired. Keep patience. Better yet take it to xiaomi service centre, they'll do it for you. But as far as i know, edl mode can help you properly flash. Keep patiece buddy
Archit9169 said:
As long as you phone does not have any hardware fault and can boot in either edl mode or fastnoot mode, then it can be repaired. Keep patience. Better yet take it to xiaomi service centre, they'll do it for you. But as far as i know, edl mode can help you properly flash. Keep patiece buddy
Click to expand...
Click to collapse
Maybe I'll try again tomorrow or take it to a repair centre or something. Thanks a lot for the help man! Really appreciate it
Kevinwith4y said:
Maybe I'll try again tomorrow or take it to a repair centre or something. Thanks a lot for the help man! Really appreciate it
Click to expand...
Click to collapse
Where do you live?
Archit9169 said:
Where do you live?
Click to expand...
Click to collapse
Singapore man
Kevinwith4y said:
Singapore man
Click to expand...
Click to collapse
Alright. I know that there are service centre there so take you mobile there and theyll repair it. I dont know about the cost, sadly, however it wont be much.
Kevinwith4y said:
Maybe I'll try again tomorrow or take it to a repair centre or something. Thanks a lot for the help man! Really appreciate it
Click to expand...
Click to collapse
Which windows version you are using.and can you boot into edl mode
Sent from my Redmi Note 3 using Tapatalk
khan_pegasus said:
Which windows version you are using.and can you boot into edl mode
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Windows 10 64bit and yes I can
Good day everyone. I am hoping I can get some help here on a problem that has been bothering me for weeks. I have the KIW-L21 phone, and I recently did an OTA update on the phone, but it got stuck on Honor when booting and never went past it. No matter what I did, it won't move and factory reset failed. So, I went to Honor support website and downloaded the "Update.app" files for UK, France, and Europe General for it. So, far when I flash the UK and General Europe, it goes well, but then I get this screen (image attached) and it keep looping on optimizing Device from 0 to 100 and again. http://i66.tinypic.com/o586d1.jpg
http://i64.tinypic.com/34z0jdi.jpg
http://i66.tinypic.com/igewk2.jpg
The French Update.app won't even work. But I am stuck here. These are all official ROMs from Huawei's website. I wonder what am doing wrong.
Please any sort of help is appreciated.
Thanks.
Is your phone still under warranty?
I am afraid Not
chrisleLP said:
Is your phone still under warranty?
Click to expand...
Click to collapse
I am afraid Not. Are you saying there is no hope for it?
I have read where someone had the same issue, but it still booted up fine, but just always showed the screen first. I was hoping this would be the case.
Damionix said:
I am afraid Not. Are you saying there is no hope for it?
I have read where someone had the same issue, but it still booted up fine, but just always showed the screen first. I was hoping this would be the case.
Click to expand...
Click to collapse
Cheer up. I'm not saying that. Can you boot to erecovery?
Yes
chrisleLP said:
Cheer up. I'm not saying that. Can you boot to erecovery?
Click to expand...
Click to collapse
I can boot into Factory Recovery. The Phone has never been rooted or messed with. Everything is still stock.
Damionix said:
I can boot into Factory Recovery. The Phone has never been rooted or messed with. Everything is still stock.
Click to expand...
Click to collapse
Did you download correct firmware according to your build number...?
I believe I did
hassanjavaid8181 said:
Did you download correct firmware according to your build number...?
Click to expand...
Click to collapse
I believe I did, but just to be on the safe side, I will tell you what I did. I looked on the back of the Phone, as I am unable to back into the Phone, and saw KIW-L21, and just before that it said QISKIW-L21.
Damionix said:
I can boot into Factory Recovery. The Phone has never been rooted or messed with. Everything is still stock.
Click to expand...
Click to collapse
Erecovery is the secondary recovery. There is an option there that will download and flash the latest available firmware. If after reflashing again, the problem still exist. I'm afraid yhis might be a hardware problem.
Damionix said:
I believe I did, but just to be on the safe side, I will tell you what I did. I looked on the back of the Phone, as I am unable to back into the Phone, and saw KIW-L21, and just before that it said QISKIW-L21.
Click to expand...
Click to collapse
No build number will be visible in settings/about..or on the box of the phone
Kiw-l21 has 2 version
Kiw-l21c185 middle east variant
Kiw-l21c432
Which one is yours?
What number firmware you were on before your issue??
This One
hassanjavaid8181 said:
No build number will be visible in settings/about..or on the box of the phone
Kiw-l21 has 2 version
Kiw-l21c185 middle east variant
Kiw-l21c432
Which one is yours?
What number firmware you were on before your issue??
Click to expand...
Click to collapse
DC - Unlocker 2 Client 1.00.1381
Detecting phone :
selection :
manufacturer - Huawei phones
model - Huawei phone in fastboot mode
Found Phone : MSM8916 for arm64
Model : Huawei phone in fastboot mode
Firmware : KIW-L21C432B140
NULL
FB LockState: LOCKED
widevine LockState: LOCKED
Bootloader Lock State: LOCKED
Root State: UNROOT
Bootloader WidevineKey: WidevineKey_NOTSET
System State: OK
Bootloader Version: 001.001.000
Battery state: battery is present
That is what I get from DC-Unlock Software
Damionix said:
DC - Unlocker 2 Client 1.00.1381
Detecting phone :
selection :
manufacturer - Huawei phones
model - Huawei phone in fastboot mode
Found Phone : MSM8916 for arm64
Model : Huawei phone in fastboot mode
Firmware : KIW-L21C432B140
NULL
FB LockState: LOCKED
widevine LockState: LOCKED
Bootloader Lock State: LOCKED
Root State: UNROOT
Bootloader WidevineKey: WidevineKey_NOTSET
System State: OK
Bootloader Version: 001.001.000
Battery state: battery is present
That is what I get from DC-Unlock Software
Click to expand...
Click to collapse
May be this firmware can help you..
http://huawei-firmware.com/rom/huawei-honor-5x/kiwl21/1298
hassanjavaid8181 said:
May be this firmware can help you..
http://huawei-firmware.com/rom/huawei-honor-5x/kiwl21/1298
Click to expand...
Click to collapse
Thank You very much. I will give it a try and let you know how it goes. I appreciate all the help.
Same Thing
hassanjavaid8181 said:
May be this firmware can help you..
http://huawei-firmware.com/rom/huawei-honor-5x/kiwl21/1298
Click to expand...
Click to collapse
Good Morning. I tried that and it didn't work either
Same thing. It flashes fine, then colored screen, and it gets stuck on Honor Splash Screen.
ERecovery
chrisleLP said:
Erecovery is the secondary recovery. There is an option there that will download and flash the latest available firmware. If after reflashing again, the problem still exist. I'm afraid yhis might be a hardware problem.
Click to expand...
Click to collapse
Could you please walk me through this erecovery process?
Damionix said:
Could you please walk me through this erecovery process?
Click to expand...
Click to collapse
Plug in your phone and boot to fastboot. In the console, type:
Code:
adb reboot recovery2
After that, select the first option.
Issue Resolved
I was able to use DC-Phoenix to flash a Factory Firmware, did an Upgrade Flash, and repair IMEI. I am now good to go. Thanks guys for all your input. I really appreciate it.
Damionix said:
I was able to use DC-Phoenix to flash a Factory Firmware, did an Upgrade Flash, and repair IMEI. I am now good to go. Thanks guys for all your input. I really appreciate it.
Click to expand...
Click to collapse
Glad you fixed your device..
Damionix said:
I was able to use DC-Phoenix to flash a Factory Firmware, did an Upgrade Flash, and repair IMEI. I am now good to go. Thanks guys for all your input. I really appreciate it.
Click to expand...
Click to collapse
Wow. Happy for you.
i have same problem here,flash firmwares in fastboot and in upgrade mode but no lucky,can you help me
have also problem in honor 5x kiw-l22 after flash i got multi colour but i can flash it through sd and fastboot mod on fastboot flash falid after that i connect on chimra tool i am getting model kiw-al10
Hello,
i am seeking help with my mediapad m5 (10,8 inch) which is stuck in a bootloop.
My Bootloader is locked, FRP is Locked. I am stucked in a bootloop.
The method by pressing Volume + and - and power to flash a UPDATE.APP via the sdcard dont work. Always fail.
The method with eRecovery dont work, it tells me it fails parsing the package.
I cant flash any .img because my bootloader is locked.
Everytime i download a firmware it shows me CMR-AL09C000 instead of CMR-AL09C432 which would be EU firmware.
On firmware finder it shows the correct one and then when i flash it, it fails.
I even used a payed unlock service which worked and let me flash a firmware but it still didnt worked out.
Maybe anyone here has a idea what i could do?
Many thanks in advance
Have you called Huawei customer service to see what they advise you do?
Sent from my SHT-W09 using Tapatalk
Maybe anyone has a TWRP Backup of a EU, 10,8 inch MediaPad M5 LTE and can share with me.
What caused your bootloop? If you used a paid unlock service, why is your bootloader still locked?
When I bootlooped my SHT AL-09, Funky Huawei's eRecovery method is basically all that worked for me. But Funky Huawei charges to use it. There may be better ways and/or free ways to recover - just letting you know that it's an option.
@MirageBlader
What you do that your device now in bootloop?
What your build before you have bootloop?
Share TWRP-Backup not work if FRP lock and Bootloader lock.
JamesBott said:
@MirageBlader
What you do that your device now in bootloop?
What your build before you have bootloop?
Share TWRP-Backup not work if FRP lock and Bootloader lock.
Click to expand...
Click to collapse
Well, I was some how stupid. I got the device, I unlocked it and root it. While rooting and patching my boot.img I must have taken the wrong update file (it stated it was correct but It wasn't). After that the struggle started. I wanted to flash a clean system to start over. Downloaded with HuaweiFirmwareFinder the correct firmware and flashed it via fastboot. Then the bootloop happens. It boots, shows the Huawei logo, after that it reboots into recovery.
FRP is locked and Bootloader Unlocked. I even tried to unlock FRP via DC-unlock and payed for it. Flashed the hole system image but it didn't helped.
I had CMR-AL09C432B151 if I remember correctly. Latest unbranded EU firmware ATM.
Sent from my HTC U12+ using Tapatalk
Quick Update: I managed to fix the bootloop and reinstall the latest Firmware (CMR-AL09C432B151).
MirageBlader said:
Quick Update: I managed to fix the bootloop and reinstall the latest Firmware (CMR-AL09C432B151).
Click to expand...
Click to collapse
Would you mind sharing what you did to fix your bootloop?
Mine is in a loop too (CMR-W09) and so far I've been unsuccessful. I even paid for dc-phoenix, and while it flashes everything oke, the device still bootloops.
droidvark said:
Would you mind sharing what you did to fix your bootloop?
Mine is in a loop too (CMR-W09) and so far I've been unsuccessful. I even paid for dc-phoenix, and while it flashes everything oke, the device still bootloops.
Click to expand...
Click to collapse
Is your Bootloader and OEM unlocked?
Gesendet von meinem HTC 10 mit Tapatalk
MirageBlader said:
Is your Bootloader and OEM unlocked?
Gesendet von meinem HTC 10 mit Tapatalk
Click to expand...
Click to collapse
Yes it is.
Hi Guys. My HV10 was on on EMUI 9. I tried downgrading to EMUI 8 using HuRupdater but it won't boot now and is not responding to charger getting plugged in or out. I tried plugging it in on my pc and a dialog box opened saying "Configuring USB SER for use" then nothing. It's not showing up as adb and fastboot device. Kindly help.
HiteshK5 said:
Hi Guys. My HV10 was on on EMUI 9. I tried downgrading to EMUI 8 using HuRupdater but it won't boot now and is not responding to charger getting plugged in or out. I tried plugging it in on my pc and a dialog box opened saying "Configuring USB SER for use" then nothing. It's not showing up as adb and fastboot device. Kindly help.
Click to expand...
Click to collapse
You should be able to restore from a backup using Hisuite. There is a system recovery option also.
Sent from my BKL-L09 using Tapatalk
uncleabubear said:
You should be able to restore from a backup using Hisuite. There is a system recovery option also.
Sent from my BKL-L09 using Tapatalk
Click to expand...
Click to collapse
It's telling me to boot to fastboot which I'm unable too.
Update:- I think it's in testpoint mode. I don't exactly know what it is and how to exit it.
HiteshK5 said:
Update:- I think it's in testpoint mode. I don't exactly know what it is and how to exit it.
Click to expand...
Click to collapse
You need use DC unlocked to unbrick it. But you might need to open your device.
miststudent2011 said:
You need use DC unlocked to unbrick it. But you might need to open your device.
Click to expand...
Click to collapse
It's not on the supported devices list. Should i continue?
Delete
HiteshK5 said:
It's not on the supported devices list. Should i continue?
Click to expand...
Click to collapse
Check mate 10 and 20 forums there are guides to solve your problem.
Hisuite won't work as it's hard bricked.
Btw which emui 8 version build did you flash ?
What is its xloader version?
What build are you before using this method?
miststudent2011 said:
Check mate 10 and 20 forums there are guides to solve your problem.
Hisuite won't work as it's hard bricked.
Click to expand...
Click to collapse
It would be very kind of you if you can share the link.
miststudent2011 said:
Btw which emui 8 version build did you flash ?
What is its xloader version?
What build are you before using this method?
Click to expand...
Click to collapse
I was on EMUI 9.0.0.190 (not sure if this was the exact one, it was the latest version as far as I know)and tried to downgrade to EMUI 8.0.0.171. Dunno the xloader version.
Also I borrowed my friend's DC Phoenix account and was following it's guide. Does anyone know which board this phone has so that I can download it's software.
HiteshK5 said:
It would be very kind of you if you can share the link.
I was on EMUI 9.0.0.190 (not sure if this was the exact one, it was the latest version as far as I know)and tried to downgrade to EMUI 8.0.0.171. Dunno the xloader version.
Also I borrowed my friend's DC Phoenix account and was following it's guide. Does anyone know which board this phone has so that I can download it's software.
Click to expand...
Click to collapse
Where are you from?
From India ?
If yes just go to service center they will solve the issue.
I am on mobile cant Give you the link right now.
If you go to my profile you can find a thread by me in Honor 10 forums about hard brick info there you can find the link to mate 10 forums.
miststudent2011 said:
Where are you from?
From India ?
If yes just go to service center they will solve the issue.
I am on mobile cant Give you the link right now.
If you go to my profile you can find a thread by me in Honor 10 forums about hard brick info there you can find the link to mate 10 forums.
Click to expand...
Click to collapse
Yep, from india. Trying to avoid going to the service centre as it's like 25km away from my house
Will check the forums.
Any idea about the board which this phone has. Want to try DC Phoenix
HiteshK5 said:
Any idea about the board which this phone has. Want to try DC Phoenix
Click to expand...
Click to collapse
-open up device
-install com1.0 drivers
-touch testpoint
-flash a working bootloader via DC-Phoenix BUT UNCHECK 'FLASH OEMINFO' ; when you are back in fastboot mode :
-DON'T USE a BoardSoftware file.
-just flash your B190's update.app with DC-Phoenix
oslo83 said:
-open up device
-install com1.0 drivers
-touch testpoint
-flash a working bootloader via DC-Phoenix BUT UNCHECK 'FLASH OEMINFO' ; when you are back in fastboot mode :
-DON'T USE a BoardSoftware file.
-just flash your B190's update.app with DC-Phoenix
Click to expand...
Click to collapse
It's already coming as COM 1.0 in device manager. Trying to flash update.app (only fastboot part) but it shows no device detected to upgrade. Had downloaded a board software and clicked update button. I clicked update button and it detected the device but showed that I don't have enough credits.
oslo83 said:
-open up device
-install com1.0 drivers
-touch testpoint
-flash a working bootloader via DC-Phoenix BUT UNCHECK 'FLASH OEMINFO' ; when you are back in fastboot mode :
-DON'T USE a BoardSoftware file.
-just flash your B190's update.app with DC-Phoenix
Click to expand...
Click to collapse
What are exact testpoints for V10? since there is no officially images with testpoints for V10.
It's available inside DC-Phoenix apps...
I don't have the tools to open the phone. Maybe l will need to go to a service centre on Monday. If possible please try to help in fixing this phone.
oslo83 said:
It's available inside DC-Phoenix apps...
Click to expand...
Click to collapse
Not for view10
Hi i have same problem my V10 is Brick Not ON, nOT go in Fastboot mode my Model is BKL-L09 i have downloaded DC-Phoneix in possible repair?
LTE
Sent from my Vfone 6++ using Tapatalk
Hi all,
Im in trouble with my phone beacuse im in demo mode, is there any option to full update.
Ps. I updated to 9.1, but cust rom and preloader are same (maybe cause bootloader is locked, frp unlocked).
I need your help, please!
I check my model I used hisuite method.
basic: 9.1.0.300
cust: 9.1.0.21
preload: 9.0.0.17
As you see preload stick in 9.0. I guess that is kind normal.
PS. You can check before you flash if using Hisuite.
If your model is supported by Hisuite nvm
1. If not,edit C:\Users\yourusername\AppData\Local\HiSuite\userdata\UpdateDogDev\HiSuiteConfig.xml
by replacing either LYA-L09/LYA-L29 to your specific model and then use system repair function via fastboot.
2. Go check C:\Users\yourusername\Documents\HiSuite\ROM
you can see basic/cust/preload version officially supported if some still in 9.0 then It meant to be 9.0.
Good luck
q13017 said:
I check my model I used hisuite method.
basic: 9.1.0.300
cust: 9.1.0.21
preload: 9.0.0.17
As you see preload stick in 9.0. I guess that is kind normal.
PS. You can check before you flash if using Hisuite.
If your model is supported by Hisuite nvm
1. If not,edit C:\Users\yourusername\AppData\Local\HiSuite\userdata\UpdateDogDev\HiSuiteConfig.xml
by replacing either LYA-L09/LYA-L29 to your specific model and then use system repair function via fastboot.
2. Go check C:\Users\yourusername\Documents\HiSuite\ROM
you can see basic/cust/preload version officially supported if some still in 9.0 then It meant to be 9.0.
Good luck
Click to expand...
Click to collapse
Does this mean it will remove the demo mode?
Shkelqim.rexhepi said:
Does this mean it will remove the demo mode?
Click to expand...
Click to collapse
My, this is the same as the photo. How is yours? and how is this mode of demonstration? How did you get into it?
douglasmietto said:
My, this is the same as the photo. How is yours? and how is this mode of demonstration? How did you get into it?
Click to expand...
Click to collapse
Its the almost the same... You got same version of custom and preloader
did you tried to just unstick demo mod under developper options??
Why your phone is in demo mod? what's happened?
Shkelqim.rexhepi said:
Hi all,
Im in trouble with my phone beacuse im in demo mode, is there any option to full update.
Ps. I updated to 9.1, but cust rom and preloader are same (maybe cause bootloader is locked, frp unlocked).
I need your help, please!
Click to expand...
Click to collapse
You can turn off demo mode in developer option.