Hello guys, i'm going directly to the point. I was trying to root my mini pro and succeeded, buy i screwed up my build.prop and the phone is in a reboot loop. I spend the afternoon trying to find solutions but cant seem to fix it, this is what i tried:
- adb cant recognise the device
- I didnt install any recovery tool
- SEUS wont let me restore (it says that i have the lastest version and wont give any option to force it)
- PC Companion does something similar to SEUS
- Can't flash it and restore, i didin't unlock the bootloader, and i need adb to do it.
Anyone can help? Maybe i'm missing something when trying to use adb? maybe there is another more obscure way to unlock the bootloader without using "msm7227_semc.cmd"?
Thanks in advance...
EDIT: By the way, i made a copy of build.prop before toying around, so i know is there...
d__D said:
Hello guys, i'm going directly to the point. I was trying to root my mini pro and succeeded, buy i screwed up my build.prop and the phone is in a reboot loop. I spend the afternoon trying to find solutions but cant seem to fix it, this is what i tried:
- adb cant recognise the device
- I didnt install any recovery tool
- SEUS wont let me restore (it says that i have the lastest version and wont give any option to force it)
- PC Companion does something similar to SEUS
- Can't flash it and restore, i didin't unlock the bootloader, and i need adb to do it.
Anyone can help? Maybe i'm missing something when trying to use adb? maybe there is another more obscure way to unlock the bootloader without using "msm7227_semc.cmd"?
Thanks in advance...
EDIT: By the way, i made a copy of build.prop before toying around, so i know is there...
Click to expand...
Click to collapse
flashtools and the firmware used in chavitorg and proceeds to flash the device, if not enter flash mode press the three keys on the mini but the power button with the cable connected to PC, and you will recognize the flash mode.
ronaldvalles said:
flashtools and the firmware used in chavitorg and proceeds to flash the device, if not enter flash mode press the three keys on the mini but the power button with the cable connected to PC, and you will recognize the flash mode.
Click to expand...
Click to collapse
Thanks for the help, but i cant seem to find the word "chavitorg" or with b or anithing similar, not in google, not in xda. I doesn't look like a misspelling on any of the guys that post tutorials or flashes.
SEUS, PCC and flashtools already recognizes the device in flash with down volume alone, and the device has 4 keys + power, not 3 (vol+ vol- home and camera)
d__D said:
Thanks for the help, but i cant seem to find the word "chavitorg" or with b or anithing similar, not in google, not in xda. I doesn't look like a misspelling on any of the guys that post tutorials or flashes.
SEUS, PCC and flashtools already recognizes the device in flash with down volume alone, and the device has 4 keys + power, not 3 (vol+ vol- home and camera)
Click to expand...
Click to collapse
KEY MENU, BACK AND CENTRAL, AND POWER, and the firmware http://www.megaupload.com/?d=EPQJPIMW Chavito WHAT IS THIS COPY OF THE FOLDER firware and proceeds to FLASHTOOLS he was also FLASHING WITH BASEBAND 4015, expected to be of HELP
Thanks again, but it seems like you are giving me instructions for a Mini, while I have a Mini Pro, would it work? I know that some flashes are not interchangeable and stuff... and i don't want to completely brick the phone...
Seus or pc companion
baseband
Can you upload a working link for chavitorg's baseband please?
Hi everyone
I think you guys can help me with this:
Sanei N10 3g with qualcomm snapdragon is bricked.
All this happend when I pressed vol- vol + and power all together, some window popped up and I had a new drive, but when I tried to turn sane i on notthing happend.
When I press the power button nothing happens, when I connect it on USB port it is recgonized as Qualcomm USB HD QLoader 9008(on COM port 3)
When I install Live Suite 1.07 or 1.09 it is recgonized as vid_1f3a_pid_efe8 but it always gives me code 10(device cannot start) which is actually right, I cannot start my sanei.
I unsolderd the battery and when I solderd it back notthing happend but i got a new device (HD AUDIO MODEM DEVICE), something like that but I cannot find the drivers.
I also used Qpst tools and it is recgonized as phone in download mode??? What is this?
I have downloaded a new firmware from sanei website, but dont now what to do with it. There is no .img file(except boot and recovery)
Now it just lays on my table.
Please help
ivko1982 said:
Hi everyone
I think you guys can help me with this:
Sanei N10 3g with qualcomm snapdragon is bricked.
All this happend when I pressed vol- vol + and power all together, some window popped up and I had a new drive, but when I tried to turn sane i on notthing happend.
When I press the power button nothing happens, when I connect it on USB port it is recgonized as Qualcomm USB HD QLoader 9008(on COM port 3)
When I install Live Suite 1.07 or 1.09 it is recgonized as vid_1f3a_pid_efe8 but it always gives me code 10(device cannot start) which is actually right, I cannot start my sanei.
I unsolderd the battery and when I solderd it back notthing happend but i got a new device (HD AUDIO MODEM DEVICE), something like that but I cannot find the drivers.
I also used Qpst tools and it is recgonized as phone in download mode??? What is this?
I have downloaded a new firmware from sanei website, but dont now what to do with it. There is no .img file(except boot and recovery)
Now it just lays on my table.
Please help
Click to expand...
Click to collapse
you can find the answer to unbrick the device here
http://www.forum.tabletworldstore.co...ch-tablet.html
Hello. I've got a polish tablet Tracer Ovo 2.0 yesterday. Today I was trying to switch nand flash memory with sdcard in the vold.fstab file. Well, I screwed up something and now I have a bootloop on tablet's startup. I was trying to flash stock rom using Batch tool, but when I connect my tablet with pressing vol + button, Windows ( 8.1 ) can't detect this tablet propetly. It's driver comes up with 43 error, so I can't really install stock rom. Also, I can't install new drivers, because when I try to, Windows is saying that I have the latest drivers for this device (wut?). When I turn of my tablet without pressing vol + button, Windows is detecting this tablet as mass storage, but I can't really do anything with it, because of the tablet's bootloop. Is there any chance that I could flash the system, or get to the vold.fstab file using my pc and correct my mistake that I've done in that file? Please, help. I'm a big newbie and guides on the Internet can't really help me, since I can't install any drivers to this tablet now.
Oh, and I'm not afraid of my battery status - charging is working.
Sorry for my english, hope you'll come up with something and help me.
Hello
excuse my English please ,cause i'm french man
I had a tcl m3g chinise rom miui ,root
The phone propose me an update on ota
i accept and and now its impossible to restart my phone
i plug it to my pc and it says unknow device with 5 disk detected
Py pc says that i must formated them to work
i do that and know its horrible
impossible to restart my phone,no drivers work .no recovery mode ,no download mode etc...
can you help me ,please
Hi, I happen to have the same phone and something similar happened to me but with a CM12.1 Moke rom, the phone was working fine but it turned off twice randomly, I connected it to the wallcharger and the PC but nothing happened, the 5 USB units appeared too on my computer so I had to keep the power button pressed for 10 seconds to force a reboot and the system loaded fine, though I went back to another CM12.1 rom. Try doing that, keep the power button pressed for 10 seconds and see if that forces a reboot.
Hi
I've tried to keep the power button pressed but nothing append.
dano33 said:
Hello
excuse my English please ,cause i'm french man
I had a tcl m3g chinise rom miui ,root
The phone propose me an update on ota
i accept and and now its impossible to restart my phone
i plug it to my pc and it says unknow device with 5 disk detected
Py pc says that i must formated them to work
i do that and know its horrible
impossible to restart my phone,no drivers work .no recovery mode ,no download mode etc...
can you help me ,please
Click to expand...
Click to collapse
hello , I also have the same problem . What did you do with your phone ? fix it? and how? help me please ..
- Download the DiskGenius
- connect the phone to a computer via USB (best to use the connector on the rear panel, and even better to use a laptop, there is the battery and if the lights go out, you are protected)
- in the Device Manager (Windows) will be Qualcomm HS-USB QDLoader 9006 (COMx ) - if not, click the + and - volume, along with the power button, the appearance, let go first and then the power and volume buttons. If you do not appear, it means you have not installed drivers Qualcomm (in the cap is, install)
- run DiskGenius (be careful! You get access to all the connected drives, do not remove too much!))
- Delete partitions SBL1 (Right-click to select the recycle symbol ), confirm the removal (Yes) to apply your changes (the first icon in the menu, vaguely reminiscent of the character Commander floppy or Total).
- disconnected and reconnected body to USB, and lo and behold - found new hardware, Windows itself installs the necessary drivers. In Device Manager, we see Qualcomm HS-USB QDLoader 9008 (COMx)
- sewn factory Lewa4.0 using QPST (full instructions in the topic, I will not be added)
- After the firmware disable the body for a long time (5-10-15 seconds) click on the button supply. We see native boot anim Hooray !!! (translated from 4pda.ru)
Original chinese tutorial:
bbs.ydss.cn/thread-524446-1-1 . html (translate it and give it a go)
Good Luck
---------- Post added at 01:29 PM ---------- Previous post was at 01:19 PM ----------
yilmazco said:
hello , I also have the same problem . What did you do with your phone ? fix it? and how? help me please ..
Click to expand...
Click to collapse
Tool:
yadi.sk/d/GvPjkXFli8u9S
yilmazco said:
hello , I also have the same problem . What did you do with your phone ? fix it? and how? help me please ..
Click to expand...
Click to collapse
sorry for the trouble, as you did at the end to fix it?
TCL m3g .qcn file
alberto00 said:
sorry for the trouble, as you did at the end to fix it?
Click to expand...
Click to collapse
Hi,
Accidentally, I wiped all data of TCL m3g and somehow, I managed to bring the phone alive. But it seems like qcn file is totally corrupted and phone networks are no more identified. IMEI, ESN & MEID are all zeroes now.
Can any body provide .qcn file of TCL m3g?
Thanks
Here is the restart Solution
dano33 said:
Hello
excuse my English please ,cause i'm french man
I had a tcl m3g chinise rom miui ,root
The phone propose me an update on ota
i accept and and now its impossible to restart my phone
i plug it to my pc and it says unknow device with 5 disk detected
Py pc says that i must formated them to work
i do that and know its horrible
impossible to restart my phone,no drivers work .no recovery mode ,no download mode etc...
can you help me ,please
Click to expand...
Click to collapse
To restart your device you have to hold the power button + volume down button for 30-45 seconds.
It will restarts automatically...
vivixa said:
Hi,
Accidentally, I wiped all data of TCL m3g and somehow, I managed to bring the phone alive. But it seems like qcn file is totally corrupted and phone networks are no more identified. IMEI, ESN & MEID are all zeroes now.
Can any body provide .qcn file of TCL m3g?
Thanks
Click to expand...
Click to collapse
The same thing for me. I can´t connect to any network. Tried different cards.
Please post the qcn file.
Tcl M3g bricked
I'm also have the same problem . How to go recovery mode?
how to save changes
xamixmix said:
- Download the DiskGenius
- connect the phone to a computer via USB (best to use the connector on the rear panel, and even better to use a laptop, there is the battery and if the lights go out, you are protected)
- in the Device Manager (Windows) will be Qualcomm HS-USB QDLoader 9006 (COMx ) - if not, click the + and - volume, along with the power button, the appearance, let go first and then the power and volume buttons. If you do not appear, it means you have not installed drivers Qualcomm (in the cap is, install)
- run DiskGenius (be careful! You get access to all the connected drives, do not remove too much!))
- Delete partitions SBL1 (Right-click to select the recycle symbol ), confirm the removal (Yes) to apply your changes (the first icon in the menu, vaguely reminiscent of the character Commander floppy or Total).
- disconnected and reconnected body to USB, and lo and behold - found new hardware, Windows itself installs the necessary drivers. In Device Manager, we see Qualcomm HS-USB QDLoader 9008 (COMx)
- sewn factory Lewa4.0 using QPST (full instructions in the topic, I will not be added)
- After the firmware disable the body for a long time (5-10-15 seconds) click on the button supply. We see native boot anim Hooray !!! (translated from 4pda.ru)
Original chinese tutorial:
bbs.ydss.cn/thread-524446-1-1 . html (translate it and give it a go)
Good Luck
---------- Post added at 01:29 PM ---------- Previous post was at 01:19 PM ----------
Tool:
yadi.sk/d/GvPjkXFli8u9S
Click to expand...
Click to collapse
after deleting partition sbl1 how to save the changes diskgenius is asking for licence
My phone is totally bricked after I deleted the partition and saved. Now it is not turning on, no bootloader or recovery or anything. Only the LED light turns on when I connect to charger or USB. Not detected in devise manager either. Please help.
I get my phone bach to life by flashing the emax mini files. But now i didn't get any network. Please post the qcn file for the TCL.
dano33 said:
Hello
excuse my English please ,cause i'm french man
I had a tcl m3g chinise rom miui ,root
The phone propose me an update on ota
i accept and and now its impossible to restart my phone
i plug it to my pc and it says unknow device with 5 disk detected
Py pc says that i must formated them to work
i do that and know its horrible
impossible to restart my phone,no drivers work .no recovery mode ,no download mode etc...
can you help me ,please
Click to expand...
Click to collapse
first you have to download your stock rom
than you can get into download mode by holding volume down button + power button for a while apx 35 to 60 seconds, As soon as getting vibration hold volume up button by holding them both....
Enjoy....