Related
i am hoping that i did not brick my phone as i just spent $600 to go get the bloody thing. i flashed darkcore kernel onto it and it was fine. the phone was fine until i went to go change the battery icon (the phone is a samsung i9000 galaxy s) it boots into recovery but when i go to do a normal boot it littraly freezes at the boot screen and thats it i left it on the table for HALF AN HOUR and when i came back it was still on the boot screen . the boot screen says galaxy s gt-i9000 (white writing) powered by darkcore and darkysrom (green writing) please help me i hope i have no bricked my phone as i am a noob to android as i have only had my phone a few days. do i need to replace the modem on the phone ? or the kernel? please if someone knows to get in contact with me. i have odin and superoneclick installed on my pc. i have wiped everything off my phone wipe data/factory reset but that doesnt do anything diffrent. it simply stays on the boot screen. i have not flashed a custom rom onto my galaxy it only has a custom kernel.
FaZeHaViiK,
I can't help you but I recommend you change your topic to fit your problem. Maybe then people would check your post out.
how do i do that ??
FaZeHaViiK said:
how do i do that ??
Click to expand...
Click to collapse
OK it is simple really. What did you do when it started causing issues? You tried to change the icon, so undo your changes. You didn't say how you tried to change it at all so not sure what steps you have to take. Also please do the proper research before you do something that can't be fixed
Sent from my Inspire 4G using Tapatalk 2
Android phones are REALLY REALLY hard to brick. what you need to do, is get yourself a factory default rom, and start over where you messed up. Messing with these phones is all trial and error. I have bricked my samsung fascinate over 30 times im sure, hell almost 10 times last night as im porting miui v4 to my phone. Dont freak out learn what ODIN is, and get it fixed.
zeruth said:
Android phones are REALLY REALLY hard to brick. what you need to do, is get yourself a factory default rom, and start over where you messed up. Messing with these phones is all trial and error. I have bricked my samsung fascinate over 30 times im sure, hell almost 10 times last night as im porting miui v4 to my phone. Dont freak out learn what ODIN is, and get it fixed.
Click to expand...
Click to collapse
Not all android phones are hard to brick. Take a look at the SGS II and the Euro Note that were perm bricked from a wiping data. No JTAG recovery would fix it. Also there are many ways to brick a device and as you recovered it. You didnt brick it. Bricking it makes it non recoverable except by Jtag. Too many people use this word wrong.
On a side note... Why would you spend 600 dollars on that phone?
Samsung problems
i really have no idea why i spent so much on it lol and i used the android app "DarkyODA" i think it was i flashed CwM DarkCore v3.0.2.8x kernel onto it via DarkyODA and it was fine after that but until i went to change the battery icon on the DarkyODA app then i went to reboot my phone and now its stuck at the boot screen i left it on overnight on the boot screen to see if it would reboot got up in the morning and it still was on the boot screen, i can get into the recovery menu but thats about it, i have been trying to find a stock kernel and rom for my phone but i simply cannot find one (build number xwjvp), i think its the battery icon thats making the phone freeze at the boot screen ive done a full system wipe but that didnt fix it, and i cannot remove the icon as i installed it on the darky app (which i cannot access as i cannot get past the boot screen), do i need to flash a stock rom and kernel or just a stock rom ? do you reckon that would fix my phone ? as i do not want to go and spend another $450 to get samsung to fix it (lol) i have odin 1.85 and i went to go flash voodoo kernel xwjvp v1.3 through odin but it got stuck half way through............
Hey all, before I say my problem, firstly I have no idea if this is the right section in the forums so apologies in advance, secondly, I have held out for 3 days trying to work out various issues before I posted. I probably did just miss one thing or misread another but no matter how much I look, no idea what as new to this. Thanks in advance for your help.
Basically, wanted to flash some custom firmware to my phone, I have been having many issues with backing up on Kies, seems to be something related to my USB's and my computer, it keeps failing during the backing up of programs. I ended up giving up on this, made a titanium pro back up of System files and of programs, also made a Nandroid backup, both on my internal phone memory I believe. Have root access, installed busy box and such, backed up some other stuff using EFS Pro, now I am completely confused, I have followed a few guides dotted around the internet, tried to install some custom firmware, it was Carbon Rom 4.2 I believe. I went into the CMW menu, wiped data/factory reset, wiped partition cache, and wiped dalvik cache, installed the rom from my internal phone memory, as it would not find it on the memory card when I tried, and now after two attempts of it seemingly doing it, on rebooting the phone, I go back to the Samsung firmware.
I have tried to read up as much as I can but obviously I am missing something here and no amount of guides or google searches have hinted at my problem, could anyone help? I know people asking constantly for information on how to put on custom firmware will be irritating, but I have genuinely taken this as far as I can alone Cheers
Now after formating something under mount/system, my phone is stuck on the logo screen, reinstalling the ROM does not work either, no idea what to do now
reflash rom, wipe data and voila.
Hey, thanks for the reply. By reflash rom, which way do you mean, am pretty confused still. The rom I download basically bricked my phone, I don't know why, I think to recover it I use ODIN and get my stock software, so is that what you mean? Or can I somehow use my Nandroid back up..?
deancolt45 said:
Hey, thanks for the reply. By reflash rom, which way do you mean, am pretty confused still. The rom I download basically bricked my phone, I don't know why, I think to recover it I use ODIN and get my stock software, so is that what you mean? Or can I somehow use my Nandroid back up..?
Click to expand...
Click to collapse
If you have a Nandroid restore that or flash your original firmware via Odin .
Never restore system files after a firmware change with TB .
jje
Ok here is the situation now, I have made things 100 times worse, I possibly should not of been doing it this late... I followed guides exactly though and there is definitely something not working right with this phone, I just don't know what, all I know is its very temperamental with connecting to computers and will fail doing the custom firmware flashes half the time, no matter what I use, even using the stock ROM i got from samimobile has caused many problems. It might be me, I don't know, but in my frustration followed some advice on a forum and I think I formatted the mount/system. SO obviously I lost both my back up's. My fault and can live with that, phone was bricked and had to do that to get past it I think..
But now no matter what kernel I use and have tried quite a few including my original one, I am unable to connect to my home wifi. It definitely is not the wifi, it worked just fine before I flashed the phone and has been working with it for 4 months, now whenever I set up the phone its constantly stuck in this obtaining network ip infinite loop. No fixes I have used have helped at all so far Sorry to keep asking stuff, I am just literally at the end of my tether, was up until 7am messing with it to no avail.
Just to reiterate a point, the reason I wanted custom firmware was because the phone was crashing randomly and just dying on me and also the speaker had lost like 90% of the volume when I wanted to play music, also it would not connect to my computer with ease, now obviously before I did anything it had issues. So that is why I feel something might be wrong, not saying I did not break anything myself, just the process of flashing the firmware has been pretty straight forward once I did it a couple of times, it has just been failing and bricking every other time, so I am not sure what the problem actually is, did I miss a step, did I mess it up? If not what has. Please helps guys. Regards.
I formatted the mount/system. SO obviously I lost both my back up's
Click to expand...
Click to collapse
formatting system wouldn't touch your backups
deancolt45 said:
Just to reiterate a point, the reason I wanted custom firmware was because the phone was crashing randomly and just dying on me and also the speaker had lost like 90% of the volume when I wanted to play music, also it would not connect to my computer with ease, now obviously before I did anything it had issues. So that is why I feel something might be wrong, not saying I did not break anything myself, just the process of flashing the firmware has been pretty straight forward once I did it a couple of times, it has just been failing and bricking every other time, so I am not sure what the problem actually is, did I miss a step, did I mess it up? If not what has. Please helps guys. Regards.
Click to expand...
Click to collapse
Usual reply if you did not know what and why and had never bothered to read the faqs and guides before flashing .Then its nearly always user error .
Best take it to a service centre and pay for a repair .
jje
edinghn are
Close thread please
Found out something really handy
Hi guys,
TheGS3 has 1 huge trick when u got stuck in firmware, CSC, etc.
Especially when u used some super usefull toolkit (like me)
I used the Galaxy S3 Toolkit, option4 (ALL in ONE) just push enter 2 times
1 to start and the last one to exit...
Got all the issues i read on hundreds of pages searching for the solution.
Accidentialy i found this morning (its 4:45am right now and busy with it since 15:00)
Start Kies, connect GS3 with USB kabel and when it says not connected take out USB
Dont plug in USB for a while...
In KIES go to Tools and irmware upgrade.. Remember, DONT plug in USB
It will ask u for your model nr which is printed on sticker in baterycover
Confirm and it will ask u S / N' which is printed on same sticker
It will start downloading firmware and u will be guided through update progress
Good Luck to y'all.. Time to go to bed.......
Ok, so I have a serious problem... My phone is locked and when I touch the text bar to enter the password, no keyboard comes up. Important information:
- I just upgraded to jelly bean (the official one that came out today)
- as far as I can tell, everything is working fine, i just can't unlock it
- when I touch the text bar, it makes a noise, but no keyboard comes up
- was working fine immediately after the upgrade
- I got done fixing some settings and locked the screen
- this may have something to do with changing the default keyboard to Google Keyboard (it was acting a little funny immidiately after, like it was crashing)
- I have Android Lost installed, the unlock function isn't working, but others do work
- phone is encrypted
Unless someone has some ideas for me within the next couple hours, I'm going to wipe the phone. Obviously, I would prefer to not do that.
==========================
EDIT:
I've managed to use Android Lost to make some backups of some stuff, but I'm still trying to figure out how to unlock the screen. I've found that I'm able to install apps remotely from google play if that gives gives anyone some ideas.
=============================
EDIT2:
I had another idea. If this is a problem with the keyboard, is there a way for me to change it remotely? Can I install another one via the store?
Alright... I gave up on trying to get passed the lock screen and tried doing a factory reset. I was afraid of the super brick issue, so instead of doing a wipe in recovery mode, I used Kies to reflash it. However, that did nothing. The phone started back up and acted like nothing happened. It asked me for the same password, then got to the lock screen and had the same keyboard issue.
I've tried various roms, but nothing seems to wipe the encrypted information properly. At some point, I got it to forget the password, but it still thinks that one exists. I even rooted it and tried shostock3, but when it boots, it asks for a password. The old password doesn't work, so I can't get passed it. I tried entering the "wrong" password many times and it said it would wipe the phone, but it just restarted to the SAMSUNG boot screen and just sat there. I pulled the battery after half an hour...
I should note that stock gingerbread seems to work fine...
Does anyone have any ideas on how to wipe the encrypted data?
If you can push apps to it, try pushing an app like no lock or something.
Short answer: No.
It is probable that encryption information is stored in the efs (encrypted file system) folder. That's where the imei and other critical stuff is stored. I don't believe anyone who posts here in the I777 forum really has a grasp on how phone encryption works though. I've only seen one other person post here who had an issue with an encrypted phone, and he was unable to solve his problem as far as I know.
If you have a proper backup of the efs partition from before the phone was encrypted, it is possible that you could solve the problem by restoring that partition. But I'm not even sure you could write to that section of the phone memory with adb with the phone in it's current state. Edit: if you can boot into stock gingerbread normally, then you can restore an efs backup, if you have one.
I'm guessing you could send it to Samsung and they could fix it for you probably.
I finally got it working. I'm not sure what combination of things did it, but I had to restore it to stock jelly bean (via kies) to get it to wipe the encryption. I guess the stock rom knows how to properly wipe it when you keep entering the wrong password. After I got it all cleaned up, I put shostock3 back on. When the battery charges back up, I'm going to try encrypting it again (in shostock).
However, now I found another issue (may or may not be a real problem). I wanted to check if the phone was still unlocked, so I dialed *#SIMLOCK# and it says "Connection problem or invalid MMI code."
Tada!
Creepy, my good friend, would be referring to me and as you know SCIU I didn't ever get it to unlock the phone. Oddly enough a stock ICS rom (my mom now has my phone right up the road so I may try this to see if it will work and then go back to ShoStock3) works fine. I have nothing hidden from the phone storage, everything shows up, it is actually unlocked and rooted though not a custom bios err firmware/ROM because when that is put on there the encryption issues come back and the password is asked for. If the correct password is entered (and my KEYBOARD comes up but I didn't change it from the Android/Samsung one) it proceeds to enter whatever it is supposed to (my guess is the POST area like on a computer when it is entering Windows/Linux, etc.) but the screen stays black (ShoStock logo doesn't even appear if I remember correctly or it does show then goes to black loading screen with the Samsung logo and that is it, perm stuck). However I did try flashing back to Gingerbread ROMs and ICS ROMs though not through official KIES.
SCIU I may have to give this a try if my mom don't mind it and see if that helps fix the problem. Thanks for starting this thread. I am sorry I didn't respond to the PM you sent me (my LGOG, Triple OG, OG, TRIPLE OG, Optimus G AT&T Phone has screen cracked twice and is unresponsive on two different phones so I sent that in to warranty repair [rapid heating and cooling issues]) and haven't been on XDA for a week. If there is anything else you need to ask or bounce ideas off of me then I am all for it.
As far as encryption goes, the process works the same as any other encryption algorithms used (MD5/HASH/SHA-!, etc.) using a basic replica of most file systems although mobile storage tends to work a tad differently. Unfortunately, the freezer trick, brute force, nor any other cracking methods I was able to try at home worked to get it to open up. I tried getting into the EFS area of the phone but never could get to the directory or have it display.
Again thanks SCIU and as I stated I may give this a try if my mom don't care.
Eagle
i've the same problem here but i cann't use kies when my phone is locked .... so what can i do??
rawan-omer said:
i've the same problem here but i cann't use kies when my phone is locked .... so what can i do??
Click to expand...
Click to collapse
You can get the full stock jelly bean Odin flashable tar in the Download Repository. See link in my signature. According to sciguy125, flashing stock jb and then inputting repeatedly the wrong password will clear it. I'm not sure how many times it takes, 5 or 10 I think. I've never worked with an encrypted phone. I'm just repeating what I have read others say. I've seen the above posted by at least one other person. You should be able to flash the stock firmware using Odin. The one you want is I777UCMD8
my phone screen is locked (with word password) , Huawei, and the keyboard doesnt show up when i click the box? tried reseting it, cant go to settings whatsoever! i didnt damage my phone in any way either. need help asap!!
moselyy said:
my phone screen is locked (with word password) , Huawei, and the keyboard doesnt show up when i click the box? tried reseting it, cant go to settings whatsoever! i didnt damage my phone in any way either. need help asap!!
Click to expand...
Click to collapse
Friend, this is the forum for the S2 (Samsung), so you won't find anything about Huawei devices here - best to ask your question in the forum for your device.
That being said if you are rooted and have a custom recovery, simply power the device off and boot into recovery and perform a factory reset from there. If that doesn't work do a full wipe (this means wiping /system), then re-flash the ROM/gapps.
me too!!! do you have some tips for me?? i almost fainted when i knew that the keyboard isnt working.... i do have a lot of important files in my phone.
Easy, you fools! JUST KIDDING lol Connect an external keyboard. Restart the phone with the keyboard plugged in and you'll have one chance to input the pass every time you restart. Good luck, bosses!
my phone screen is locked (with word password) , SAMSUNG GALAXY TAB 3V, and the keyboard doesnt show up when i click the box? tried reseting it, cant go to settings whatsoever! i didnt damage my phone in any way either. need help asap!
My sumsang keyboard has stopped I cannot do nothing because is secure by password can you help please
I got the same problem but everything on my phone is fine except it doesn't let me enter the password I dnt wanna factory reset it cause I got important pictures in it any suggestions on how to get my keyboard working.
Solution that worked for me
Hello all,
I usually don't post things around, but something told me to do this, since I don't see any threads talking about this solution.
My solution was the following:
Went to google play store on my computer via chrome. Logged in to the user attached to my play store and re-installed all keyboard apps I have.
That worked beautifully and hope this helps other people!!
hi,
"maybe you saw this post elsewhere but i was forwarded here so the rest is the same"
have elephone p2000 with some custom rom on it and working stock recovery. than i flash new rom called resrom 1.5, rooted BUT internal storage is access denied and 0kb. Just to say that my usb port is broken and will be hard to replace it because someone was trying to make it work and totally screwed up.
So anyway I cannot connect to a pc and fix things. Next, cant access recovery, tried to flash new one but to no avail. I am still rooted but even when using some apk to flash new rom or recovery i get msgs like "not enough space" or nothing is happening.
info on the phone:
ELEPHONE P2000 MT 5692
4.4.2
MOLY.WR8.W1315.MD.WG.MP.V35.P8.2014/11/03
KERNEL 3.4.67 [email protected] #1
BUILD P2000_20150228_RESTORN
Play store ok, calls and the rest is fine, apk i am using: mobileuncle, rashr, auto flasher but nothing gets job done, flashyfy doesn't work and many others. I was looking into init files saw some guide but don t want to mess things even more so i gave up, also wanting to flash boot.img but no proper or functional apk for it.
sometimes on phone start stuck in a loop of screen turn on for 20 sec and then off and its like that until i remove battery, all before rom logo, same thing if i try use buttons combination for recovery or whatever i press in any combination nothing changes.
This is not my first smartphone but is of this kind and funny companies, had problems before with Sony, Samsung but in this extent never, always find YOU guys everybody clever in some fields and as a community more than THE BEST, as you can see i dont post or seek answers by asking, i rather research until now. I fell hopeless, useless and never more stupid, or i m just tired of looking for the answer. In some other case i would give it to my child to play the games an to hell with this phone but its my wife's and she dont want to by a new phone for some reason. Help me to be the man of the house again, kidding, loosing it....
I think I gave you overall picture of the phone state and someone might show me the way to have fully working phone. I forgot, if you are wondering how do i charge battery, well I take it out twice a day and charging on the base of other broken phone, that part i did cover, help me with the rest.
p.s my SD card is working most of the time so this is my only connection to a pc....
Deleted
Hello forum people, I need help to revive my S3 i9300, if you could help me I would really appreciate it.
I tell what I remember about the problem:
The phone was rooteado to be able to use it with any company since it was of movistar. a year ago with the rootking (we sent it to root), the phone was my dad and now has a new one, and it stopped using about 2-3 months.
Then I lent it to a friend who had just broken his cell, so I gave it to him so he has something until he buys one, but he told me that it did not work because he did not load and unload very quickly. He gave it back to me and I stopped using it until about 1 month ago, that I was left without a cell phone and I want to use it to have something.
The same thing happens as it does not load and it is very easy to download, BUT if you use the charger and cable of the Huawei ascend Mate 7 that my dad has, it charges perfectly and the cargo is not cut at all.
Well, seeing that this happened, I restarted it from the factory (I guess the root will be removed with that).
It was still branded and only loaded with the charger and the Huawei cable ...
Well now I tell what happened with what I did.
I install the samsung drivers for the compu, install odin 3.10.6 and under the recovery file that I put up, well I install everything but when I realized instead I read fast and instead of saying PDA said AP in the odin.
Well I try to turn it on and it does not turn on, I try to enter into recovery mode and it does not start.
Then I install another odin, version 1.30 and have a PDA, I do everything as I say start the phone in download mode, home odin, connect the phone to the computer, put the file in pda and give start.
He tells me that everything went well but still does not turn on and without going into recovery mode.
Say that when I do recovery mode (volume up, home and power) I see the logo of samsung and like that desinstegra, then it appears again and blinks in blue but as if it were broken and the logo moves. In short broken.
Then then install another recovery, https://dl.twrp.me/i9300/twrp-3.0.2-...0.img.tar.html
Now I want to enter into recovery mode but this appears and I want to touch some option that appears but nothing, as if the touch was dead.
And after that, it seems to me that I tried to change the Kernel and I put any but the one of my model by mistake.
Current status of the s3:
It lights normally but it takes a long time.
Enter DOWNLOAD mode (vol down, home and Power)
The screen touch does not work but it does show an image.
The buttons work, also the easy button of back and home.
DO NOT enter RECOVER mode (vol up, home and power) is frozen in the Samsung logo.
I want to make it work with any other rom that is functional except the STOCK. And that transforms into unlocekd
It does not matter if when I install a new ROM the files are deleted, I do not have anything in the phone.
Thank you very much to those who respond.
Only to get sure, that I understood you right:
after flashing the wrong kernel, your touch in twrp is not working anymore?
Will say the device is not reacting when you press a button on the screen with your fingers? If so than, I am afraid that your touch is broken. What kernel did you use? Can you post the name of the zip or tar file?
Beside of that, after flashing samsung stock, the reboot will last quite long. Maybe around 15 min till up to 25 or 30. And after flashing and before reboot, go to recovery and make a factory reset. Cross my fingers... :fingers-crossed:
rodman01 said:
Only to get sure, that I understood you right:
after flashing the wrong kernel, your touch in twrp is not working anymore?
Will say the device is not reacting when you press a button on the screen with your fingers? If so than, I am afraid that your touch is broken. What kernel did you use? Can you post the name of the zip or tar file?
Beside of that, after flashing samsung stock, the reboot will last quite long. Maybe around 15 min till up to 25 or 30. And after flashing and before reboot, go to recovery and make a factory reset. Cross my fingers... :fingers-crossed:
Click to expand...
Click to collapse
Hello, if I think that the Kernel had changed I do not remember exactly what it was because I downloaded it on a page written in Asian language by mistake and the Google translator confused the words and he said it was from the s3 but I think it was from the note 3.
The tactile does not respond exactly.
I did not understand him completely, he wants me to enter RECOVERY mode (it takes about 15-20 min to enter) and then do a factory reset?
I almost forgot to clarify that I had tried to do this from the video: https://www.youtube.com/watch?v=fA86_HFGx_w
Everything was installed perfect and I did it as is, except to delete.
Or reinstall the factory rom to see if it worked again.
If you flashed a kernel from note3 that the touch will be most probably minimum damaged and does not work proper anymore. I flashed mistakenly the kernel from the note2 and touch was broken, but maybe you were lucky and your touch is still working. No, passing into recovery should take only a few seconds, but rebooting into system after flashing samsung stock, then in recovery, then wiping and factory reset, could take a rather long time.
rodman01 said:
If you flashed a kernel from note3 that the touch will be most probably minimum damaged and does not work proper anymore. I flashed mistakenly the kernel from the note2 and touch was broken, but maybe you were lucky and your touch is still working. No, passing into recovery should take only a few seconds, but rebooting into system after flashing samsung stock, then in recovery, then wiping and factory reset, could take a rather long time.
Click to expand...
Click to collapse
Could you tell me how to do it please? I'm not an expert at all in changing ROM.
but you wrote that you already flashed something (?) via odin? I understood that you flashed samsung stock rom, beside kernel and twrp to proof, whether phone is working with original sw? If not than please check and search the i9300 forum section, there are a few of howtos and todo threads and posts which explains it even more better, that I could ever do
Edit: for example:
https://forum.xda-developers.com/galaxy-s3/general/samsung-galaxy-s3-sticky-roll-thread-t2344125 and from there for example
https://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
rodman01 said:
but you wrote that you already flashed something (?) via odin? I understood that you flashed samsung stock rom, beside kernel and twrp to proof, whether phone is working with original sw? If not than please check and search the i9300 forum section, there are a few of howtos and todo threads and posts which explains it even more better, that I could ever do
Click to expand...
Click to collapse
I used odin but I forgot how I had done and had followed the steps of a tutorial that I lost the link.
check my edited post above, now with links to guides and one of the best feature here on xda is the search button and that we have many things to read
rodman01 said:
check my edited post above, now with links to guides and one of the best feature here on xda is the search button and that we have many things to read
Click to expand...
Click to collapse
Hello, thank you very much for the links that you have passed me. They will be very useful, excuse me but I do not want to be irritating at all but I am really lost.
My only question is to know how to start reliving it?
I start installing CWN and then change the ROM?
I would recommend to start with flashing the original samsung stock sw via odin. To see that everything is working as it should. If it is so, especially your touch, than you can go ahead with routing, flashing an alternative recovery and testing custom roms, like leo or pie as you posted in the other thread. The time you are spending with writing here and in the second thread you could have already finished the sw flash and reboot to system to check the health of your device. Others than that procedure is a waste of time in my opinion. But thats your decision. On the other hand, we, or better I wouldn't spoon feed you further, because you can find almost everything for that years old device here with search, read read and read.
rodman01 said:
I would recommend to start with flashing the original samsung stock sw via odin. To see that everything is working as it should. If it is so, especially your touch, than you can go ahead with routing, flashing an alternative recovery and testing custom roms, like leo or pie as you posted in the other thread. The time you are spending with writing here and in the second thread you could have already finished the sw flash and reboot to system to check the health of your device. Others than that procedure is a waste of time in my opinion. But thats your decision. On the other hand, we, or better I wouldn't spoon feed you further, because you can find almost everything for that years old device here with search, read read and read.
Click to expand...
Click to collapse
Hello, I did the following, I had tried to re-install the stock stock a few days ago and it did not work, I did it for odin.
So what I did today was, install the recovery mode of ClockWorkMod and probe with the rom of MIUI 8 and that of Linage16, no installation. Then try with this: https://forum.xda-developers.com/galaxy-s3/development/rom-t3442868 And install correctly but it does not work, pass the Samsung logo but then when the ROM logo appears it stays there frozen and restarts ... it seems to me that officially the phone is dead.
Again: the right stock samsung sw should work if flash via odin didn't fail and, what I already mentioned, after flashing you did a factory reset in recovery. After that the reboot into system could take several minutes. Otherwise you can try it with repartition efs backup restore etc etc etc.
btw: newer custom roms, like leo-16, cannot be flashed with the old cwm recovery and cwm touch recovery, as you mentioned in the related thread, would not make much sense, if your touch is broken!?! If you do not want to go via samsung stock sw, then get a newer twrp, search for info which one is suitable, and guides how to flash custom roms, and flash the preferred one of your choice.