Update 20180806:
There are many device-related bugs as we can see.
Different hardwares/softwares will cause different bugs on different devices, and there's probably no way to fix all of them just by modifying this port, but by porting it to devices respectively.
Anyone feel free to do it on your device and distribute your patches and ports based on this one.
Look into the P semi-GSI and system/vendor images from other P preview to get some idea.
WARNING:I‘m not responsible for any consequences at all.This is an OEM rom ported from Vivo X21 so it may cause wrong behaviors including partition overwritting and may brick your phone or break hardwares.I strongly recommend you take a completely full backup of your device and know how to recovery firmwares in case of any problems.
This is still in early stage and should be normal if some features are broken.
Only working on Qualcomm fully-Trebled deivces.[/B]
Known Bugs:
Keymaster not fully working on some platforms.(Lockscreen password may broken)
Features likely broken:
Advanced settings,fingerprint,SMS sending,ime
Almost Working in all deivces:
Boot
VoLTE
WLAN
BT
...
Install for A-only:
1.enable Treble ,flash a fully-trebled 8.1 rom
2.Extract FuntouchOS_P_port.7z to your TWRP backup folder (/.../TWRP/BACKUPS/$(yourserialnumber)/
3.Restore Funtouch OS /system with TWRP
4.flash patch zip
5.wipe data,flash fbe_disabler and Permissiver (from semiGSI thread) if needed for your device.
6.Reboot.
Normally it will boot to bootanimation.If it doessn't pass bootanim then take logs with
adb logcat > logcat.txt via PC.
NOTE: If you're stuck at logo , please make sure you can boot sGSI
Telegram Group:
https://t.me/funtouchosp
Credits:
Special thanks to @erfanoabdi
Vivo for ROM
Xiaomi for device
ChangeLog:
v3(20180729):IME Keyboard fixed.
Keymaster improved.
v2(20180727)ebloated /system to 2.8g
Major fixes about UI and vivo system services.
v1(20180727): Initial release.
Download
GDrive: https://drive.google.com/drive/folders/14RLFFu3mHDCdtOIzvH0IEDjZRZ_iZK_K?usp=sharing
BaiduNetdisk: https://pan.baidu.com/s/1KyzS0k_464BQSqOhQBjOQw pass: 8s5w
Older version:
v1:
ROM
https://drive.google.com/file/d/1WfcsihieEbFoypWxqW1K5DC-TOEFKDuk/view?usp=sharing
Patch
https://drive.google.com/file/d/1U58Cb42K0RgxoV9RXSC2boYqke6yPgm6/view?usp=sharing
ROM link is not working.
Hyapatia said:
ROM link is not working.
Click to expand...
Click to collapse
Me too
Download link updated!
fxsheep said:
Download link updated!
Click to expand...
Click to collapse
Ok I will try it,nice job:good:
SADLY MY SYSTEM 2.9GB
Redmi Note 4x
Lol which phone has more than 3Gb for system? Android only uses 1.x gb...
Hyapatia said:
Lol which phone has more than 3Gb for system? Android only uses 1.x gb...
Click to expand...
Click to collapse
My Xiaomi MI 6 ...
Okay...I'll release a debloated one later,need at least 3gb /system
fxsheep said:
My Xiaomi MI 6 ...
Click to expand...
Click to collapse
Yeah an exception cuz almost every device has 2.8-9-3gb system partition.
so big?
omarilzz said:
SADLY MY SYSTEM 2.9GB
Redmi Note 4x
Click to expand...
Click to collapse
me too:crying:
Hyapatia said:
Lol which phone has more than 3Gb for system? Android only uses 1.x gb...
Click to expand...
Click to collapse
My LG V30 with 6.x GB before i took 512MB off for a vendor partition xD
AB ???
……
system 3.4g and my device is huawei……
Sent from my Honor V9 using XDA Labs
SGCMarkus said:
My LG V30 with 6.x GB before i took 512MB off for a vendor partition xD
Click to expand...
Click to collapse
Have tested lol
Damn, that shows how ridiculously bloated some of OEM Roms are...
(my 5t has 2.9gb system, and it's rather clean out of the box)
NOT working on devices with /system smaller than 3.7G.
Slim-down Brother! so, everyone can use, remove all app which is available in playstore.
Thanks
where is selinux_disabler??
onism said:
where is selinux_disabler??
Click to expand...
Click to collapse
Permissiver.zip from semi-GSI thread
Related
I compiled the code lineage by nicknitewolf in 64bit mode.
My hope is to encourage experienced developers to create 64bits stable roms.
*** I have no experience in developing roms.
Source Code for review
local_manifests: https://github.com/Redmi2BR/local_manifests
Kernel: https://github.com/Redmi2BR/android_kernel_wingtech_msm8916_64
Device tree: https://github.com/Redmi2BR/android_device_wingtech_wt88047_64
common tree: https://github.com/Redmi2BR/android_device_cyanogen_msm8916-common
Vendor: https://github.com/Redmi2BR/proprietary_vendor_wingtech64
TWRP: https://github.com/Redmi2BR/device_wingtech_wt88047_64-twrp
Mandatory Installation Requirements:
ROMs 64bits need Twrp 64bit:
[TWRP 3.2.3-0][64bits][29/november/2018]:
https://www.androidfilehost.com/?fid=11410963190603861795
Resize the system partition to 1.5GB, (I resized to 2GB):
https://forum.xda-developers.com/showthread.php?t=3803042
Download ROM:
https://androidfilehost.com/?w=files&flid=283111
.
I am not responsible for bricked devices or dead SD cards.
Use at your own risk.
Secret bonus post:
Experimental Treble ROM Arm64 for Redmi2. For limited time!
This rom is just a test done by someone with little experience. So do not have a dedicated Thread, who should create are the creators of the project.
It was build using as base the source code from wt88047-treble github project from @karthik km and @mkfslsxbin.
Note:
This ROM can be installed on a system partition with 1GB of space.
But other GSI ROMs Arm64 usually have 1.5GB, 2GB or more.
Requirements:
Use Treble Twrp 64bits oem-Cache:
[02/november/2018]https://www.androidfilehost.com/?fid=11410932744536993167
Install the LinkerFix when using other GSI images (currently support oreo only):
[22/october/2018]https://www.androidfilehost.com/?fid=11410932744536985475
Download Treble64 ROM:
[18/october/2018]
https://www.androidfilehost.com/?fid=11410932744536983003
I am not responsible for bricked devices or dead SD cards.
ok ill try
Camera and volte are working or not
This is good, keep it up
interesting
@Cecell3000, what will happen if we don't resize system partition? couldn't installed??
xehed said:
@Cecell3000, what will happen if we don't resize system partition? couldn't installed??
Click to expand...
Click to collapse
probably wiil get error in TWRP when install (look my /system with 5 modules magisk, only one more of 10mb)
with 1,5gb, is possible install a nano open gapps without errors :good:
camera = freeze
try opencamera=freeze
but this rom is very fast, thanks dev..
Devlopment Of 64bit Oreo ROMs Would be better if some advance dev notice that work..
Thanks Your First Devlopment Of 64bit oreo..
update:
[12/October/2018]: fix camera
https://www.androidfilehost.com/?fid=1322778262904026669
.
Cecell3000 said:
update:
[12/October/2018]: fix camera
https://www.androidfilehost.com/?fid=1322778262904026669
.
Click to expand...
Click to collapse
Very good rom but Volte not working
Will it lag on 1/8?
- GPS not working, or take too long to position fix. I've waited 10mins and nothing
- Mobile data not working
Otherwise ROM is very fast and stable, good work!
deleted
Update
Experimental Treble ROM Arm64 for Redmi2.
(In the second post)
For limited time!
Cecell3000 said:
Experimental Treble ROM Arm64 for Redmi2.
(In the second post)
For limited time!
Click to expand...
Click to collapse
Why limited time
Rbqttp said:
Why limited time
Click to expand...
Click to collapse
aggressive marketing strategy
Cecell3000 said:
aggressive marketing strategy
Click to expand...
Click to collapse
:laugh:
Cecell3000 said:
Experimental Treble ROM Arm64 for Redmi2.
(In the second post)
For limited time!
Click to expand...
Click to collapse
just installed it on 1 Gb ram version.
Rom seems faster and so far everything run well.
great job dev, keep up development.
Is there any ported oxygen os for vince?, I recently saw a video in which there is a ported oxygen os for note 5 pro so is there any for vince please tell me
Good question. I would like to know as well
pbk14 said:
Is there any ported oxygen os for vince?, I recently saw a video in which there is a ported oxygen os for note 5 pro so is there any for vince please tell me
Click to expand...
Click to collapse
yes!
hussein1 said:
yes!
Click to expand...
Click to collapse
Can you link me pls
I think is this one ...
https://forum.xda-developers.com/redmi-note-5/development/rom-nitrogenos-pie-t3862742
foxmonter said:
I think is this one ...
https://forum.xda-developers.com/redmi-note-5/development/rom-nitrogenos-pie-t3862742
Click to expand...
Click to collapse
Oxygen is O2 and Nitrogen is N2
Looking for the OxygenOS from OnePlus phones ported to vince.
As an ex Redmi 5 Plus user, and a new OnePlus 6 user, i agree, OxygenOS would be amazing. It's the best ROM i ever used, and i've been rooting and changing ROMs for 8 years, that means something !
Some things look very device-specific though, and RAM management is one of a kind (New feature on the 6T uses available RAM to store app data like a Ramdisk, but for this, you need huge amounts of it) but if a Pixel ROM can be ported to vince, why an Oxygen one couldn't haha !
pbk14 said:
Can you link me pls
Click to expand...
Click to collapse
OnePlus OS Phone:
Oxygen OS 8.1 Fully Stable for vince!!
Download Link:
https://drive.google.com/file/d/1SKgtKuLOP1uPENEzQ9CQXNi1FJBogNVx/view
Totone56 said:
As an ex Redmi 5 Plus user, and a new OnePlus 6 user, i agree, OxygenOS would be amazing. It's the best ROM i ever used, and i've been rooting and changing ROMs for 8 years, that means something !
Some things look very device-specific though, and RAM management is one of a kind (New feature on the 6T uses available RAM to store app data like a Ramdisk, but for this, you need huge amounts of it) but if a Pixel ROM can be ported to vince, why an Oxygen one couldn't haha !
Click to expand...
Click to collapse
Hahahahaha
---------- Post added at 01:39 PM ---------- Previous post was at 01:30 PM ----------
pbk14 said:
Can you link me pls
Click to expand...
Click to collapse
Do you need Huawei EMUI as well?
So:
Huawei EMUI 8.2 Fully Stable for vince!!!
Download Link:
https://mega.nz/#!NmJy1KRA!5fTVNRno0lMAzyyRclbesi7_N-4-1Kmxd6i_33sjNeY
First install this ROM
Based Treble ROM.
https://cloud.mail.ru/public/2b4a/s1PCxhxUa
hussein1 said:
OnePlus OS Phone:
Oxygen OS 8.1 Fully Stable for vince!!
Download Link:
https://drive.google.com/file/d/1SKgtKuLOP1uPENEzQ9CQXNi1FJBogNVx/view
Click to expand...
Click to collapse
Awesome to hear how do i install the file
goldbeard said:
Awesome to hear how do i install the file
Click to expand...
Click to collapse
1-Install MIUI 10
2-Install this rom https://cloud.mail.ru/public/2b4a/s1PCxhxUa
3-Download & Extract Oxygen os rom and copy to storage
3-go to twrp recovery and restore and selected oxygen folder
4- reboot system:good:
hussein1 said:
Hahahahaha
---------- Post added at 01:39 PM ---------- Previous post was at 01:30 PM ----------
Do you need Huawei EMUI as well?
So:
Huawei EMUI 8.2 Fully Stable for vince!!!
Download Link:
https://mega.nz/#!NmJy1KRA!5fTVNRno0lMAzyyRclbesi7_N-4-1Kmxd6i_33sjNeY
First install this ROM
Based Treble ROM.
https://cloud.mail.ru/public/2b4a/s1PCxhxUa
Click to expand...
Click to collapse
Thanks bro
hussein1 said:
OnePlus OS Phone:
Oxygen OS 8.1 Fully Stable for vince!!
Download Link:
https://drive.google.com/file/d/1SKgtKuLOP1uPENEzQ9CQXNi1FJBogNVx/view
Click to expand...
Click to collapse
Well, amazing haha !
gestures tab in settings menu keeps crashing any ideea what to do?
Do you need Huawei EMUI as well?
So:
Huawei EMUI 8.2 Fully Stable for vince!!!
Download Link:
https://mega.nz/#!NmJy1KRA!5fTVNRno0lMAzyyRclbesi7_N-4-1Kmxd6i_33sjNeY
First install this ROM
Based Treble ROM.
https://cloud.mail.ru/public/2b4a/s1PCxhxUa
Click to expand...
Click to collapse
Fist of all thanks for share these links, Can you explain the exact process to install:
- Emui
- OxygenOs
Emui is not booting, or stay in Android generic bootanimation or it redirects me to fastboot.
What I did.
- Flashed AOSP vendor treble based and rebooted to android.
- Rebooted to TWRP, deleted system (in other try not deleting it) and restored backup of system.
- Mount vendor and flashed patch-1 then patch-2, rebooted.
- it stays in Android and if I wipe dalvik and cache it redirects me to fastboot.
hussein1 said:
OnePlus OS Phone:
Oxygen OS 8.1 Fully Stable for vince!!
Download Link:
https://drive.google.com/file/d/1SKgtKuLOP1uPENEzQ9CQXNi1FJBogNVx/view
Click to expand...
Click to collapse
Can we try it with cardinal Aosp which we were using for pie gsi ?
And the procedure would be
1. Installing the Base rom (ur suggested or Cardinal Aosp)
2. And restoring the oxygen os backup (can we use orangefox recovery or only twrp treble)
3. Then rebooting to system
Is the above steps right ?
bug: on oxygen os, the headphone no detect in music player, any solution?
hussein1 said:
1-Install MIUI 10
2-Install this rom https://cloud.mail.ru/public/2b4a/s1PCxhxUa
3-Download & Extract Oxygen os rom and copy to storage
3-go to twrp recovery and restore and selected oxygen folder
4- reboot system:good:
Click to expand...
Click to collapse
I was never able to get this rom installed...i couldnt do the point 3, i dont see the oxygen folder listed when i try to restore...using Orange Fox recovery
goldbeard said:
I was never able to get this rom installed...i couldnt do the point 3, i dont see the oxygen folder listed when i try to restore...using Orange Fox recovery
Click to expand...
Click to collapse
It´s a backup made with TWRP so only this recovery will detect the files
SubwayChamp said:
It´s a backup made with TWRP so only this recovery will detect the files
Click to expand...
Click to collapse
Emui doesnt boot, without flashing patches it ended up in boot loop and after flashing patches ( patch 1 always fail) it ended up in fastboot, dont know how the dev was able to boot it.
For Oxygen Os
* Battery hungry Rom
* Wired Headphones dont work
* Offscreen gestures dont work
* One plus camera dont work
But still i loved the Oxygen OS hopefully dev will give bug fixes.
Code:
Your warranty is now void.
Should anything happen to your device, I will be there to help you,
but I won't be responsible for any damage on your device.
before flashing it! YOU are choosing to make these modifications
This is a flasheable zip that makes the Galaxy A5 and A7 (2017 Series) Treble capable
What does the zip do?
if you flash it once it deletes the system partition and creates 2 new partitions:
system ~4.1Gb
vendor 600Mb
and installs modified TWRP for Treble
if flashed again, it will erase vendor and system partitions and create a single system partition ~4.7Gb (stock) plus reinstall TWRP stock version.
What doesn't the zip do?
this zip does not add the necessary files for Project Treble, it only creates the necessary partitions
Notes:
repartitioning is an extremely dangerous process, I have personally tested it on an A720F and the Muhamet User has confirmed its operation on an A520F.
for now the zip is only useful for developers because we do not have a vendor partition usable so far
Special thanks to:
Corsicanu for stock TWRP
CosmicDan for the repartitioning guide
Muhamet for Trying it on his A5
Downloads
Repartition_Tool_A5-A7_2017.zip - TWRP 3.3.1-0
A7_TDKernel.img - Treble Debug Kernel (Based on HadesKernel 1.7)
XDA:DevDB Information
Treble Repartition Tool for A5 - A7 (2017), Tool/Utility for the Samsung Galaxy A Series 2017 A3, A5, A7
Contributors
Reverant
Version Information
Status: Testing
Created 2019-06-15
Last Updated 2019-09-01
What does this zip?
Repartition all partitions?
A bit more information in OP thread would be nice
Wher is the zip??
Simon1511 said:
What does this zip?
Repartition all partitions?
A bit more information in OP thread would be nice
Click to expand...
Click to collapse
I assume so. You can also do this with parted.
Simon1511 said:
What does this zip?
Repartition all partitions?
A bit more information in OP thread would be nice
Click to expand...
Click to collapse
no at all, only modifies the system partition, your other partitions like "data" will be untouched
Honestly, this seems promising.
But, does the vendor partition remain empty, or does this copy the vendor files to there, so we can install treble ROMs?
Or we should flash a treble ROM that's made for our device specifically so it fills that hole? Or maybe some other way? That part is a bit unclear. In short, how does the vendor partition get filled?
Also, you mentioned treble TWRP. Where did you get it? Did you make it? What version is it?
Thanks for your patience about this
sheepkill15 said:
Honestly, this seems promising.
But, does the vendor partition remain empty, or does this copy the vendor files to there, so we can install treble ROMs?
Or we should flash a treble ROM that's made for our device specifically so it fills that hole? Or maybe some other way? That part is a bit unclear. In short, how does the vendor partition get filled?
Also, you mentioned treble TWRP. Where did you get it? Did you make it? What version is it?
Thanks for your patience about this
Click to expand...
Click to collapse
Yes, you need a treble rom or vendor files and a different boot image. Then it's ready for gsi's. Treble twrp can be compiled similar to "normal" twrp. So someone needs to build a treble rom. You?
SnowFuhrer said:
Yes, you need a treble rom or vendor files and a different boot image. Then it's ready for gsi's. Treble twrp can be compiled similar to "normal" twrp. So someone needs to build a treble rom. You?
Click to expand...
Click to collapse
Thought that was the case
Hehe, maybe I could, but I don't think I will
But well, we'll see what happens in the future.
I was trying to make a usable vendor partition, but I don know how exactly, and now I am studing, I am on a "walted 1 second for power, watling another", pelease be patient
the twrp was modified by me, its v3.2.3-1 , my conection intenet drops when I try to upload the zip
Soon I will edit the thread ading some of info
Reverant said:
I was trying to make a usable vendor partition, but I don know how exactly, and now I am studing, I am on a "walted 1 second for power, watling another", pelease be patient
the twrp was modified by me, its v3.2.3-1 , my conection intenet drops when I try to upload the zip
Soon I will edit the thread ading some of info
Click to expand...
Click to collapse
Any news??
We need this on your device please. Come to our rescue.
Thanks and looking forward
treble A5
tested on A5 2017 work fine but vendor partition can be mounted
soltan82 said:
tested on A5 2017 work fine but vendor partition can be mounted
Click to expand...
Click to collapse
yes, you need a moded kernel to mount it, i have one, but for A7.
Reverant said:
yes, you need a moded kernel to mount it, i have one, but for A7.
Click to expand...
Click to collapse
Do for A5 please
Please update
Moddingexpert1988 said:
Please update
Click to expand...
Click to collapse
Why? Theres no need for an update.
Also, stop asking for updates everywhere, thats against the XDA rules.
Simon1511 said:
Why? Theres no need for an update.
Also, stop asking for updates everywhere, thats against the XDA rules.
Click to expand...
Click to collapse
Gsi not working,because don't have treble vendor
Moddingexpert1988 said:
Gsi not working,because don't have treble vendor
Click to expand...
Click to collapse
You mean you have no vendor partition?
You have TWRP that came with it installed and you can see/mount the vendor partition in the recovery? If so, theres nothing wrong with this script.
Simon1511 said:
You mean you have no vendor partition?
You have TWRP that came with it installed and you can see/mount the vendor partition in the recovery? If so, theres nothing wrong with this script.
Click to expand...
Click to collapse
No what I'm trying to say is that the vendor partition is empty and I would like you to update it for that
Moddingexpert1988 said:
No what I'm trying to say is that the vendor partition is empty and I would like you to update it for that
Click to expand...
Click to collapse
Dude, did you even read the OP post?
It clearly says "...Does not add the neccessary files for Project Treble...".
This script only adds an empty partition, not the files needed for treble.
:silly:
Thank you for the build, @luisgonzales1977
Waiting for A/B build.
ZainBilq said:
Thank you for the build, @luisgonzales1977
Waiting for A/B build.
Click to expand...
Click to collapse
when you finish testing :good::silly:
Will it include Mi9 in-display FP like in phhusson's AOSP?
luisgonzales1977 said:
when you finish testing :good::silly:
Click to expand...
Click to collapse
Yeah I know...just like that....
This Rom work in Lenovo k5 pro? Is a device arm64 aonly.
any AB love ?
TheUndertaker21 said:
any AB love ?
Click to expand...
Click to collapse
they are soon testing it...:good:
luisgonzales1977 said:
when you finish testing :good::silly:
Click to expand...
Click to collapse
I am a few hours on your rom and is working bugfree for me everything i need arcore also working very nice job:good:
Excellent work !
Booted successfully on Huawei p10 lite after changing selinux/mapping/26.0.cil .
Except I have faced settings FC when opening Decor room in X-Tensions and I'm not able to make logcat due to ADB unauthorized
Thanks
android q activity animation available sir?
won't be able to bootup on mate 10 lite
flamedrops said:
won't be able to bootup on mate 10 lite
Click to expand...
Click to collapse
you test?
successfully booted up on my Lenovo S5 (K520/Seoul), but on the first setting screen after boot it shown missmatch vendor notice (it recommend to flash vendor img). i still could skip it and continue by the way.
So about the missmatch vendor, will it hurt if i don't flash it? because i don't know which file of vendor img i should flash.
update : same as reported from other user several posts before, Decor room in X-Tensions FC when open
luisgonzales1977 said:
you test?
Click to expand...
Click to collapse
yes, i use to try every other rom, now im on havoc and it works.
Boots up in Blu Vivo XI. Can't seem to get magisk to work with any gsi's. Thanks for the rom.
aljoscha81 said:
I am a few hours on your rom and is working bugfree for me everything i need arcore also working very nice job:good:
Click to expand...
Click to collapse
Hi pal. Any specific steps to flash this rom on Z17? What rom as base do you have? Any nfound vendor or something else?
surfer30 said:
Hi pal. Any specific steps to flash this rom on Z17? What rom as base do you have? Any nfound vendor or something else?
Click to expand...
Click to collapse
I am on mokee as base installed as ever no further steps
Is there a chance to get an ARM32-A build? I would like to try this rom. Looks promising!
khuy21 said:
So about the missmatch vendor, will it hurt if i don't flash it? because i don't know which file of vendor img i should flash.
update : same as reported from other user several posts before, Decor room in X-Tensions FC when open
Click to expand...
Click to collapse
not need change vendor
just need set right fingerprint values in build.prop, some magisk modules may this
or search info and change it by hand
on short - fingerprint from system build.prop need to match values from vendor build.prop
Hello,
Does anybody know a twrp or any other custom recovery and roms compatible with Redmi 10c? Please share including procedures..
Yes, im currently using it, you can't find this twrp elsewhere coz it's an unofficial version ported to Redmi 10C by this indonesian guy named FenFren, so big credits to him.
TWRP 3.6.1 Port | Redmi 10C/10 Power
Update: 10/06/22
By FenFren
Download Link https://bit.ly/Fog361Mtp
Ported from spes/spesn (twrp by dblenk9)
Changelogs :
• Fixed MTP
Im currently using EU ROM, and it's also ported by this indonesian guy (FenFren).
You can just join this telegram group if you need more info. {Mod edit: Link removed. Oswald Boelcke, Senior Moderator}
I tried it. sideload only works when a rom is installed. after wiping all partitions it cannot read internal memory.
Briant ogw said:
I tried it. sideload only works when a rom is installed. after wiping all partitions it cannot read internal memory.
Click to expand...
Click to collapse
What? Why are you wiping all partitions? I install magisk(25.1) with this twrp without any errors. You can only wipe partitions if you are going to install custom rom, please note that other than ported eu rom, there are no available custom rom for 10c yet, maybe soon, or after a few months
Briant ogw said:
I tried it. sideload only works when a rom is installed. after wiping all partitions it cannot read internal memory.
Click to expand...
Click to collapse
Base on my experience, you really can't read the internal storage if there are no rom installed, use sd card or otg instead lol
rdevzph said:
What? Why are you wiping all partitions? I install magisk(25.1) with this twrp without any errors. You can only wipe partitions if you are going to install custom rom, please note that other than ported eu rom, there are no available custom rom for 10c yet, maybe soon, or after a few months
Click to expand...
Click to collapse
Ha ha.. thanks for enlightening me.. i was wiping partitions to test various gsi's
Briant ogw said:
Ha ha.. thanks for enlightening me.. i was wiping partitions to test various gsi's
Click to expand...
Click to collapse
You can use fastboot to test GSIs also, as twrp don't work fully.
Have you recovered your device?
LR7875 said:
You can use fastboot to test GSIs also, as twrp don't work fully.
Have you recovered your device?
Click to expand...
Click to collapse
Yes. I always have to revert to stock rom before testing another one.. so which partition shlould i flash in fastboot? Super?,. And should i also flash stock vendor?
Briant ogw said:
Yes. I always have to revert to stock rom before testing another one.. so which partition shlould i flash in fastboot? Super?,. And should i also flash stock vendor?
Click to expand...
Click to collapse
Wait I forgot the dynamic partitions thing sorry. You can try system, system_a and system_b at your own risk though.
Can you flash the GSI without wiping system partition in twrp (just factory reset)?
Briant ogw said:
Hello,
Does anybody know a twrp or any other custom recovery and roms compatible with Redmi 10c? Please share including procedures..
Click to expand...
Click to collapse
Xiaomi EU - https://mega.nz/folder/Mp9XyRAT#pX94jMGiYPCJel5IAt2mQw
TWRP - https://drive.google.com/file/d/11M465d_J5axroEY2DYgkCo_cvfnmmKLL/view?usp=drivesdk
I attached the file with OF to this post
I also found the recovery installer for redmi 10c - https://drive.google.com/file/d/1-T5Xx8y3OxosfobpN0CR-T4nUcYYJqYw/view
erroor234 said:
Xiaomi EU - https://mega.nz/folder/Mp9XyRAT#pX94jMGiYPCJel5IAt2mQw
TWRP - https://drive.google.com/file/d/11M465d_J5axroEY2DYgkCo_cvfnmmKLL/view?usp=drivesdk
I attached the file with OF to this post
I also found the recovery installer for redmi 10c - https://drive.google.com/file/d/1-T5Xx8y3OxosfobpN0CR-T4nUcYYJqYw/view
Click to expand...
Click to collapse
Tried EU ROM (v13.0.8) in Redmi 10C but honestly it still have some bugs (minimal)
Bugs i found:
- Volume Slider is not optimized in landscape mode (not centered).
- YouTube: When you watch videos on full screen, you can't go back to portrait mode.
- Gesture Navigation is not fully optimized in some apps (you'll see tiny black screen below, kinda different from Global version)
I just go back to Global ROM, flash magisk, flash some modules, and customized my device a little bit
Briant ogw said:
Ha ha.. thanks for enlightening me.. i was wiping partitions to test various gsi's
Click to expand...
Click to collapse
My friend tried GSI on Redmi 10C but still have a lot of bugs, Audio bug, Ghost touch bug and Notification overlay bug, etc.
Im just waiting for stable custom rom, i'll just stay on Global version for now
rdevzph said:
My friend tried GSI on Redmi 10C but still have a lot of bugs, Audio bug, Ghost touch bug and Notification overlay bug, etc.
Im just waiting for stable custom rom, i'll just stay on Global version for now
Click to expand...
Click to collapse
Redmi 10C was released just 3-4 months ago. It will take a long time to wait for normal ROMs
It seems to me that MIUI global works very well, as for MIUI
erroor234 said:
Redmi 10C was released just 3-4 months ago. It will take a long time to wait for normal ROMs
It seems to me that MIUI global works very well, as for MIUI
Click to expand...
Click to collapse
Yeah, but in Redmi 10C i experienced random freezing for a few seconds, later it will show "System UI isn't responding", i think it's because of MIUI 13 is not fully optimized yet, luckily i have root, i already fixed that by flashing MemeUI Enhancer
Btw, do you guys know the default data partition for Redmi 10C? Is it f2fs or ext4? I just can't find any info about it lol
I'm currently using f2fs
rdevzph said:
Btw, do you guys know the default data partition for Redmi 10C? Is it f2fs or ext4? I just can't find any info about it lol
I'm currently using f2fs
Click to expand...
Click to collapse
it seems to me that f2fs, because xiaomi would not use the old ext4 in new devices with the UFS 2.2 memory standard
erroor234 said:
it seems to me that f2fs, because xiaomi would not use the old ext4 in new devices with the UFS 2.2 memory standard
Click to expand...
Click to collapse
Thanks bro, i also thought the same thing, i just want to confirm it, actually ext4 is also good and more safer and stable than f2fs, but i still prefer f2fs, i had no problem with it
erroor234 said:
Xiaomi UE - https://mega.nz/folder/Mp9XyRAT#pX94jMGiYPCJel5IAt2mQw
TWRP- https ://drive.google.com/file/d/11M465d_J5axroEY2DYgkCo_cvfnmmKLL/view?usp=drivesdk
Adjunté el archivo con OF a esta publicación.
También encontré el instalador de recuperación para redmi 10c: https://drive.google.com/file/d/1-T5Xx8y3OxosfobpN0CR-T4nUcYYJqYw/view
Click to expand...
Click to collapse
Saludos. ¿Algún tutorial para rootear con estas herramientas?
I found a tutorial on how to get root and TWRP recovery on our device
need an unlocked bootloader!!!
YouTube:
Attention!!!
Device "Fog" - without NFC
Device "Rain" - with NFC