I compiled the code lineage by nicknitewolf in 64bit mode.
My hope is to encourage experienced developers to create 64bits stable roms.
*** I have no experience in developing roms.
Source Code for review
local_manifests: https://github.com/Redmi2BR/local_manifests
Kernel: https://github.com/Redmi2BR/android_kernel_wingtech_msm8916_64
Device tree: https://github.com/Redmi2BR/android_device_wingtech_wt88047_64
common tree: https://github.com/Redmi2BR/android_device_cyanogen_msm8916-common
Vendor: https://github.com/Redmi2BR/proprietary_vendor_wingtech64
TWRP: https://github.com/Redmi2BR/device_wingtech_wt88047_64-twrp
Mandatory Installation Requirements:
ROMs 64bits need Twrp 64bit:
[TWRP 3.2.3-0][64bits][29/november/2018]:
https://www.androidfilehost.com/?fid=11410963190603861795
Resize the system partition to 1.5GB, (I resized to 2GB):
https://forum.xda-developers.com/showthread.php?t=3803042
Download ROM:
https://androidfilehost.com/?w=files&flid=283111
.
I am not responsible for bricked devices or dead SD cards.
Use at your own risk.
Secret bonus post:
Experimental Treble ROM Arm64 for Redmi2. For limited time!
This rom is just a test done by someone with little experience. So do not have a dedicated Thread, who should create are the creators of the project.
It was build using as base the source code from wt88047-treble github project from @karthik km and @mkfslsxbin.
Note:
This ROM can be installed on a system partition with 1GB of space.
But other GSI ROMs Arm64 usually have 1.5GB, 2GB or more.
Requirements:
Use Treble Twrp 64bits oem-Cache:
[02/november/2018]https://www.androidfilehost.com/?fid=11410932744536993167
Install the LinkerFix when using other GSI images (currently support oreo only):
[22/october/2018]https://www.androidfilehost.com/?fid=11410932744536985475
Download Treble64 ROM:
[18/october/2018]
https://www.androidfilehost.com/?fid=11410932744536983003
I am not responsible for bricked devices or dead SD cards.
ok ill try
Camera and volte are working or not
This is good, keep it up
interesting
@Cecell3000, what will happen if we don't resize system partition? couldn't installed??
xehed said:
@Cecell3000, what will happen if we don't resize system partition? couldn't installed??
Click to expand...
Click to collapse
probably wiil get error in TWRP when install (look my /system with 5 modules magisk, only one more of 10mb)
with 1,5gb, is possible install a nano open gapps without errors :good:
camera = freeze
try opencamera=freeze
but this rom is very fast, thanks dev..
Devlopment Of 64bit Oreo ROMs Would be better if some advance dev notice that work..
Thanks Your First Devlopment Of 64bit oreo..
update:
[12/October/2018]: fix camera
https://www.androidfilehost.com/?fid=1322778262904026669
.
Cecell3000 said:
update:
[12/October/2018]: fix camera
https://www.androidfilehost.com/?fid=1322778262904026669
.
Click to expand...
Click to collapse
Very good rom but Volte not working
Will it lag on 1/8?
- GPS not working, or take too long to position fix. I've waited 10mins and nothing
- Mobile data not working
Otherwise ROM is very fast and stable, good work!
deleted
Update
Experimental Treble ROM Arm64 for Redmi2.
(In the second post)
For limited time!
Cecell3000 said:
Experimental Treble ROM Arm64 for Redmi2.
(In the second post)
For limited time!
Click to expand...
Click to collapse
Why limited time
Rbqttp said:
Why limited time
Click to expand...
Click to collapse
aggressive marketing strategy
Cecell3000 said:
aggressive marketing strategy
Click to expand...
Click to collapse
:laugh:
Cecell3000 said:
Experimental Treble ROM Arm64 for Redmi2.
(In the second post)
For limited time!
Click to expand...
Click to collapse
just installed it on 1 Gb ram version.
Rom seems faster and so far everything run well.
great job dev, keep up development.
Related
Slim 7.1.2 build 1.17 (b15)
Download:
* Slim-cherryplus-7.1.2.build.1.17-Jan-20180122-b15.zip
* md5sum: e7a559bd66bbfa32176f39ad21b50c19
* OpenGApps
Currently working:
* network (2G-LTE) dualsim
* Wi-Fi
* BT
* sdcardfs
* GPS
* OTG
* adopted storage
* ussd
* BT headset
* ROM doesn't have root
Also, you can install Magisk
Currently not working
* SIM2 works only 2G
* Stock camera doesn't record video - use Footej Camera to do it
* tap to wake
* youtube 720p60
Installations:
* Go to TWRP
* Wipe system, data, dalvik, cache
* Install RR
or
can also be installed without copying the archive to the phone:
* in TWRP: Adviced - adb sideload - start
* on PC: adb sideload path/to/zip
from RR
if you want go from RR, you need wipe dalvik cache after zip install, and after first boot you need clean data of "Clock" and "Phone" (not "Contacts!")
Updates
* check updates in Settings - About - System Updates
* download update
* reboot device to TWRP
* install the new update of RR
* reboot to System
Thanks to OpenKirin for kernel source code GPL v2.0
XDA:DevDB Information
Slim 7.1.2 build 1.17 (b15) for Honor 4X (Che2-L11, cherryplus) (Kirin 620), ROM for the Honor 4x
Contributors
ksrt12, fell9781, fitsuli
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Android 6.x (EMUI 4.x) Europe/Russia
Based On: SlimRoms
Version Information
Status: No Longer Updated
Current Stable Version: b15
Stable Release Date: 2018-01-22
Created 2017-09-28
Last Updated 2019-03-25
All builds: | MEGA
Slim-cherryplus-7.1.2.build.1.17-Dec-20171222-b14.zip
Slim-cherryplus-7.1.2.build.1.17-Dec-20171203-b13.zip
Slim-cherryplus-7.1.2.build.1.15-Weekly-20171027-b11.zip
Slim-cherryplus-7.1.2.build.1.13-Weekly-20171009-b10.zip
Slim-cherryplus-7.1.2.build.1.11-Weekly-20170926-b9.zip
Thanks, Slimrom, light and smooth ...
Good to see another custom ROM for Che2.
This is great, I am going to try both of these (Slim and RR). What is the main difference between EMUI and SlimROM except for it's smaller? Reviews?
Bob1900 said:
This is great, I am going to try both of these (Slim and RR). What is the main difference between EMUI and SlimROM except for it's smaller? Reviews?
Click to expand...
Click to collapse
-Newer android version
-Some(most) people like slim/RR/some other custom rom overlay better.
-If you had some problems in EMUI with background user apps stopping (like whatsapp message notifications arriving too late or google photo doesn't sync) you won't have those problems any more.
For me battery in deepsleep goes bit faster on RR than it went on EMUI.
EMUI ~3-8% in 10h
RR ~10-14% in 10h
But maybe it's because the background apps work like you would expect them to work. Or maybe it's something else.
keikari said:
EMUI ~3-8% in 10h
RR ~10-14% in 10h
Click to expand...
Click to collapse
Thanks. I get only about ~10% per 10h on my EMUI, and I'm running modaco rom, which is a slimmed down version of stock EMUI. I haven't had any problems with background apps or other things on modaco, but I like the idea of finally advancing to Nougat on kirin with a functional dual sim.
What about Apps2SD or adoptable storage? Maybe it's not necessary on Slim or RR? Honor 4x is almost useless without adding some internal storage via some such solution.
Bob1900 said:
Thanks. I get only about ~10% per 10h on my EMUI, and I'm running modaco rom, which is a slimmed down version of stock EMUI. I haven't had any problems with background apps or other things on modaco, but I like the idea of finally advancing to Nougat on kirin with a functional dual sim.
What about Apps2SD or adoptable storage? Maybe it's not necessary on Slim or RR? Honor 4x is almost useless without adding some internal storage via some such solution.
Click to expand...
Click to collapse
I think System will always take ~4GB (unless you do some re-partitioning) so you would still need Apps2SD or adoptable.
Wild_Spark said:
Youtube 720p60 works fine?
Click to expand...
Click to collapse
No
hello,
the rom is not compatible with g620s l01
you should edit a link because you put hhttps ^^
keikari said:
I think System will always take ~4GB (unless you do some re-partitioning) so you would still need Apps2SD or adoptable.
Click to expand...
Click to collapse
Is adoptable storage improved in nougat? It was not good enough in MM to really expand storage, so Apps2SD was needed back then.
Bob1900 said:
Is adoptable storage improved in nougat? It was not good enough in MM to really expand storage, so Apps2SD was needed back then.
Click to expand...
Click to collapse
No idea, I haven't tested adopted storage because Apps2SD is more flexible.
Will it work on che1-L04
overwatch1234567890 said:
Will it work on che1-L04
Click to expand...
Click to collapse
No, it should not work.
keikari said:
No, it should not work.
Click to expand...
Click to collapse
Why
overwatch1234567890 said:
Why
Click to expand...
Click to collapse
http://www.phonemore.com/compare/phones/huawei-honor-4x-che1-l04-vs-huawei-honor-4x-che2-l11/4067719
Scroll down to hardware.
overwatch1234567890 said:
Why
Click to expand...
Click to collapse
man u have most of roms in this device ...
https://forum.xda-developers.com/ho...-lineageos-14-1-huawei-g620s-honor-4-t3547682
https://forum.xda-developers.com/honor-4x/development/rom-mokee-7-1-huawei-g620s-honor-4-4x-t3535922
https://forum.xda-developers.com/honor-4x/development/rr-n-7-1-2-t3610975
the last one is the same rom for us che2-l11 it can work for ur model but slim7 and remix for che2-l11 dont work for ur version but these links work for u
---------- Post added at 11:08 AM ---------- Previous post was at 10:54 AM ----------
overwatch1234567890 said:
Why
Click to expand...
Click to collapse
man u have most of roms in this device ...
https://forum.xda-developers.com/hon...nor-4-t3547682
https://forum.xda-developers.com/hon...-4-4x-t3535922
https://forum.xda-developers.com/hon...7-1-2-t3610975
the last one is the same rom for us che2-l11 it can work for ur model but slim7 and remix for che2-l11 dont work for ur version but these links work for u
is it possible to make a custom rom for cherryplus that will utilize the storage being used by the system?!? like from 3.6 GB usable internal storage to 5-6 GB?!? I mean that would be a great help!
mike13dash said:
is it possible to make a custom rom for cherryplus that will utilize the storage being used by the system?!? like from 3.6 GB usable internal storage to 5-6 GB?!? I mean that would be a great help!
Click to expand...
Click to collapse
I think you could try to re-partitioning your device. Though it might be a bit risky if you are not sure what you are doing. It's safer to just use adopted storage or apps2sd to get more space and performance lost in that is unnoticeable in most cases (and I think it only affects to loadingtimes)
keikari said:
I think you could try to re-partitioning your device. Though it might be a bit risky if you are not sure what you are doing. It's safer to just use adopted storage or apps2sd to get more space and performance lost in that is unnoticeable in most cases (and I think it only affects to loadingtimes)
Click to expand...
Click to collapse
Agreed. There are only a few apps that load significantly slower if you link them with Apps2SD, and you can put those apps on /system partition. (For example "HereWeGo" navigation app takes very long time to load, like ~25 sec.)
It have the same battery consomming like RROS?
I think you should compare with Che2-ul00 B580 last build, only 1~2% in 12hours at deepsleep.
***Using Europeen oem***
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install custom recovery - use my twrp
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Work
Almost all
Known Issues
LineageOS Builds
7. 20180704: fix livedisplay, adaptive brightness: https://drive.google.com/file/d/1WVjBTzlcDNf4_71cQTSG0qQMcydqyJt8/view?usp=sharing
6. 20180521: move to new kernel (J600GDXU1ARE2 - original samsung oreo kernel), swith to sdcardfs: https://drive.google.com/file/d/1HzRL5t_B-fw3mkclaWixi12TSGtU_6Nu/view?usp=sharing
5. 20180505: tethering: https://drive.google.com/file/d/1DLTedMTgeYqyT6uefOtp9hZhfz7Afu47/view?usp=sharing
4. 20180503: fixed camera preview, video recording, drm (netflix), gps (it's very slow on the start, but then i'm able to use tablet as navigator), use original gapps from opengapps.org: https://drive.google.com/file/d/1nak5_PwBtTJFsBTo-qTthxy0B5Jx93Rz/view?usp=sharing
3. 20180224: ril (mobile data), bluetooth, video hardware acceleration (may be not full for now, but in mx player hw+ working smooth). if you using gapps - see message about it below: https://drive.google.com/open?id=1IaqgWMyIwhHKgJssPRpHoTjgJB6QwblK
2. 20171227: ril (calls), wake by home button, offline charge, disable gps service (it's fill all internal sdcard): https://drive.google.com/file/d/1mkgppV2Gc3i_WF29ohSeW_jrcmieAyeD/view?usp=sharing
Small comment about ril: this is temporary fix, I had fixed DataCallSetup::ToDataProtocol function in seclib-ril.so using ida pro disassebler. Right now protocal always "IP", later i'll fix it more correct.
1. 20171223: https://drive.google.com/file/d/1Puxy2qlR5X9GOcRHsw5AkLiuX1TgBUZu/view?usp=sharing
TWRP
Use my twrp from https://forum.xda-developers.com/ga...-lineageos-14-1-android-7-1-2-nougat-t3706002
Gapps:
https://opengapps.org
Platform: ARM
Android: 8.1
Variant: any
Sources
Sources: https://github.com/Lineageos
Kernel: https://github.com/Valera1978/android_kernel_samsung_exynos7870
Device: https://github.com/Valera1978/android_device_samsung_gtaxllte
Vendor: https://github.com/Valera1978/android_vendor_samsung_gtaxllte
Thanks
Thanks to LineageOS team
Thanks to @J0SH1X
Valera1978 said:
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install custom recovery - use my twrp
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Work
Wifi, sound, vibra, sdcard, mtp, otg
Known Issues
Ril, bluetooth, camera
LineageOS Builds
1. 20171223: https://drive.google.com/file/d/1Puxy2qlR5X9GOcRHsw5AkLiuX1TgBUZu/view?usp=sharing
TWRP
Use my twrp from https://forum.xda-developers.com/ga...-lineageos-14-1-android-7-1-2-nougat-t3706002
Gapps
Opengapps still up to 8.0 only.
For 8.1 you need new gapps, I'm using gapps from: https://forum.xda-developers.com/android/general/unofficial-8-1-gapps-arm-t3720385
Sources
Sources: https://github.com/Lineageos
Kernel: https://github.com/Valera1978/android_kernel_samsung_exynos7870
Device: https://github.com/Valera1978/android_device_samsung_gtaxllte
Vendor: https://github.com/Valera1978/android_vendor_samsung_gtaxllte
Thanks
Thanks to LineageOS team
Thanks to @J0SH1X
Click to expand...
Click to collapse
Congrats! Thanks a lot your excellent team?: @Valera1978 , @JOSH1X . :good::good::good:
I'll try it soon.
---------- Post added at 05:12 PM ---------- Previous post was at 05:12 PM ----------
Valera1978 said:
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install custom recovery - use my twrp
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Work
Wifi, sound, vibra, sdcard, mtp, otg
Known Issues
Ril, bluetooth, camera
LineageOS Builds
1. 20171223: https://drive.google.com/file/d/1Puxy2qlR5X9GOcRHsw5AkLiuX1TgBUZu/view?usp=sharing
TWRP
Use my twrp from https://forum.xda-developers.com/ga...-lineageos-14-1-android-7-1-2-nougat-t3706002
Gapps
Opengapps still up to 8.0 only.
For 8.1 you need new gapps, I'm using gapps from: https://forum.xda-developers.com/android/general/unofficial-8-1-gapps-arm-t3720385
Sources
Sources: https://github.com/Lineageos
Kernel: https://github.com/Valera1978/android_kernel_samsung_exynos7870
Device: https://github.com/Valera1978/android_device_samsung_gtaxllte
Vendor: https://github.com/Valera1978/android_vendor_samsung_gtaxllte
Thanks
Thanks to LineageOS team
Thanks to @J0SH1X
Click to expand...
Click to collapse
Is this only for SM-T585? Does it work for SM-T580?
LineageOS for SM-T580
@jimmyzyx In some way a good question, however it seems to me: SM-T585 only. Valera1978is well aware about the existence of the SM-T580 of course.
Question now is: will there be a Lineage version for SM-T580 as well ? I thought J0SH1X was looking into that, but now I see he opened a thread for NexusOS (had never heard of that one ever before). So as yet there is some unclearity about this. At least I guess it would take quite a bit of time to work on 2 different ROMS at the same time....
JoostA said:
@jimmyzyx In some way a good question, however it seems to me: SM-T585 only. Valera1978is well aware about the existence of the SM-T580 of course.
Question now is: will there be a Lineage version for SM-T580 as well ? I thought J0SH1X was looking into that, but now I see he opened a thread for NexusOS (had never heard of that one ever before). So as yet there is some unclearity about this. At least I guess it would take quite a bit of time to work on 2 different ROMS at the same time....
Click to expand...
Click to collapse
I know it is meant for the T585 but I installed it on my T580 before I noticed that. It wasn't until it told me to insert my Sim card that I realized it was for the T585. But it seems to be working fine anyway. Same problems as the 15.0 for the t580, so I'm going to try it for now.
I think you should definitely add support for SM-T350. There's no active devs for our poor device?
vin_001 said:
I think you should definitely add support for SM-T350. There's no active devs for our poor device
Click to expand...
Click to collapse
Not going to happen. The T350 doesn't even use the same SoC as the T585, which is the device the dev has. He couldn't even test it on the T580, which is exactly the same as the T585 but without LTE. It just happened to work but that was pure serendipity.
lewmur said:
Not going to happen. The T350 doesn't even use the same SoC as the T585, which is the device the dev has. He couldn't even test it on the T580, which is exactly the same as the T585 but without LTE. It just happened to work but that was pure serendipity.
Click to expand...
Click to collapse
It works on 580 as only difference seems to be a modem and of course SIM slot. That's a good thing, as this means that devs can do 1 ROM and just add few kB build.prop patch for 580 model
Sent from my LG-H815 using Tapatalk
Wow pleasant surprise!
It's amazing from, but I can't play video on YouTube or film web, can u show me how to fix this problem . Thanks
Gửi từ SM-T585 của tôi bằng cách sử dụng Tapatalk
How can I quit the SIM for my SM-T580?
Pd: And... How can I fix the camera and bluetooth? I want to help you:highfive:
I have the same problem and I can't see any video. Can anyone help me? Thanks in advance
I am using your LOS 14.1 rom right now. But please, don't integrate SU into the rom.
People that are able to flash this rom via twrp are also able to flash LOS SU or Magisk on their own.
TheHellSite said:
I am using your LOS 14.1 rom right now. But please, don't integrate SU into the rom.
People that are able to flash this rom via twrp are also able to flash LOS SU or Magisk on their own.
Click to expand...
Click to collapse
You could find here at least some kind of root?
repey6 said:
You could find here at least some kind of root?
Click to expand...
Click to collapse
As I said, I am still running the LOS 14.1 build from Valera.
Thats why I expected it to be rooted too.
vin_001 said:
I think you should definitely add support for SM-T350. There's no active devs for our poor device
Click to expand...
Click to collapse
lewmur said:
Not going to happen. The T350 doesn't even use the same SoC as the T585, which is the device the dev has. He couldn't even test it on the T580, which is exactly the same as the T585 but without LTE. It just happened to work but that was pure serendipity.
Click to expand...
Click to collapse
the T560 uses the same SoC as the T350. The only difference between the T350 and T560 is a 1.6 inch screen difference. And the 560 already has LineageOS worked out to a degree. I think we just need a Good Device Tree for the MSM8916.
I've been hoping to get a build environment setup here soon.
Delgoth said:
the T560 uses the same SoC as the T350. The only difference between the T350 and T560 is a 1.6 inch screen difference. And the 560 already has LineageOS worked out to a degree. I think we just need a Good Device Tree for the MSM8916.
I've been hoping to get a build environment setup here soon.
Click to expand...
Click to collapse
First of all, the SM-T560 is a Tab E and doesn't use the same SoC as the T350 but what does it have to with the T580 and T585? The T580 and T585 use the Exynos 7870 which is NOT used in either the T350 (Snapdragon 410) or T560 (Spreadtrum SC8830A). Your information is wrong all the way around.
4929york said:
First of all, the SM-T560 is a Tab E and doesn't use the same SoC as the T350 but what does it have to with the T580 and T585? The T580 and T585 use the Exynos 7870 which is NOT used in either the T350 (Snapdragon 410) or T560 (Spreadtrum SC8830A). Your information is wrong all the way around.
Click to expand...
Click to collapse
I know that the T560NU is a Tab E. But mine shows it as using the MSM8916 SoC including the APQ8016
Both my T350 and T560 show the same thing.
Delgoth said:
I know that the T560NU is a Tab E. But mine shows it as using the MSM8916 SoC including the APQ8016
Both my T350 and T560 show the same thing.
Click to expand...
Click to collapse
Even if both the T350 and T560 DID use the same SoC, and everything I find on the T560 says otherwise, neither one uses the same one as the T580. They don't even have the same number of cores. The T580 has eight while the other two have four.
4929york said:
Even if both the T350 and T560 DID use the same SoC, and everything I find on the T560 says otherwise, neither one uses the same one as the T580. They don't even have the same number of cores. The T580 has eight while the other two have four.
Click to expand...
Click to collapse
I get that, I originally made the post I did because of the user asking about the T350 in this thread. I was trying to direct him to the T560 thread on Lineage.
Hi all,
Please consider using official Resurrection Remix GSI instead of this!
I've made my work on AOSP Phh-Treble as modular as possible, so that it can be reused on other ROMs.
As part of this effort, I'm releasing GSIs of Resurrection Remix.
This is a GSI, and true to the GSI spirit. It aims at supporting a maximum number of devices, but only with AOSP-available hardware features.
All credits obviously goes to Resurrection Remix developers
v5: (2018-06-27)
Image for ARM64 A-only device with gapps
Image for ARM64 A-only device vanilla
Image for ARM64 A/B device with gapps
Image for ARM64 A/B device vanilla
Image for ARM32 A-only device with Android Go gapps
Image for ARM32 A-only device vanilla
v4: (2018-05-19)
Image for ARM64 A-only device
Image for ARM64 A/B device
Image for ARM32 A-only device
Image for ARM32 A-only devices, with Android Go gapps
V3: (2018-04-05)
Image for ARM64 A-only device
Image for ARM64 A/B device
Image for ARM32 A-only device
ChangeLog:
v4 (2018-05-19):
- Update to latest AOSP Phh-Treble patches
- New Android Go variant with gapps
v3 (2018-04-05):
- Fixed S9 backlight control
- Resize /system to maximum size on first boot
v2 (2018-03-26):
- Failed build
How to build:
Code:
git clone https://github.com/phhusson/treble_experimentations
mkdir RR; cd RR
bash ../treble_experimentations/build-rom.sh android-8.1 rr
I'm assuming that this build works with the G965F now?
Keep up the good work!
Woaw...thanks a lot for the Rom...
Savoury said:
I'm assuming that this build works with the G965F now?
Keep up the good work!
Click to expand...
Click to collapse
Well, this RR hasn't been tested much, and even AOSP hasn't been tested on G965F as far as I know.
But it's supposed to work.
Feel free to report your results
does this include gapps for a/b devices
Feel free to PM me, and we'll test AOSP if you want to.
thanks for your work, A-only version running smooth on S9+. GAPPS and if possible root would be nice.
Great Work!
Thanks! Working fine in Xiaomi Mi5 but some small bugs
Ohhhh man @phhusson this ROM is pure love, was desperately waiting for this, thankyou so much
Any idea how to flash Gapps onto the rom?
chen8894 said:
Any idea how to flash Gapps onto the rom?
Click to expand...
Click to collapse
Reboot Recovery after you flashed the Image, then install Opengapps of your choice. (Depends on free space on /System for some Devices, for Mido the Micro Gapps are to big)
panchovix said:
Thanks! Working fine in Xiaomi Mi5 but some small bugs
Click to expand...
Click to collapse
How many bugs?
ohwarumbloss said:
Reboot Recovery after you flashed the Image, then install Opengapps of your choice. (Depends on free space on /System for some Devices, for Mido the Micro Gapps are to big)
Click to expand...
Click to collapse
Sorry... didn't clarify. My device is mate 10 pro.
GerWonder said:
thanks for your work, A-only version running smooth on S9+. GAPPS and if possible root would be nice.
Click to expand...
Click to collapse
I guess the cameras don't work as with stock ROM? thinking of example the 2x zoom.
rafizulhasan said:
How many bugs?
Click to expand...
Click to collapse
Backlight buttons, VolTE and home fp button, well i mean they are not vital at all except maybe for VolTE (here in Chile at least VolTE isn't implemented yet, so no worries)
Just wondering tho, the GSI LOS and AOSP have backlight buttons since it has the options in the "buttons option", but not on RR GSI
panchovix said:
Backlight buttons, VolTE and home fp button, well i mean they are not vital at all except maybe for VolTE (here in Chile at least VolTE isn't implemented yet, so no worries)
Just wondering tho, the GSI LOS and AOSP have backlight buttons since it has the options in the "buttons option", but not on RR GSI
Click to expand...
Click to collapse
Yeah the button backlight patches don't apply on RR, and patch fails are ignored at the moment (because ROMs might already include patches. For instance lineage already has this button backlight patch.
I'll try to fix it, but that's quite low on my product priority list.
phhusson said:
Yeah the button backlight patches don't apply on RR, and patch fails are ignored at the moment (because ROMs might already include patches. For instance lineage already has this button backlight patch.
I'll try to fix it, but that's quite low on my product priority list.
Click to expand...
Click to collapse
No problem man! i'm just thankful of your work, it is just a minor thing for me at least
Thanks!Working on the mi 6 but can't set the password.
Great!
Hi
After LeMax2 Project Treble port, I decide to bring up to our device too. Since I've x720 6/64 variant this project was possible to me tho due to QFIL tool in case of bricks, but wasn't need thanks for god.
Project Treble as Work in progress, please read the OP before flash/bla.
and let's the party begin. check sreenshots in "Screenshots" or in the second post.
READ ME FIRST:
it's a buggy rom: I don't care about that, since I put [WIP] that mean new fixes will coming up.
Respect works of devs because they spend time and energy to do these things.
I did not tolerate ETA.
Compatible Devices:
x720: yes.
x722: yes.
x727: yes.
How is possible:
click here.
How I done:
Porting patches of TWRP to our one that I will release one for us too.
Applying the kernel patch from LeMax2 one to mount vendor on ZL1.
Compile the whole rom with Project Treble flags in device tree and proprietary blobs.
Works
Audio.
ADB.
Bluetooth.
Camera.
Display.
Fingerprint.
Graphics: hwcomposer & gralloc.
Internal Storages.
Hardware navigation buttons.
LeEco Extras.
Lights.
NFC.
RIL
Sensors.
USSD Codes: seems works
Wifi.
Bugs
Tell us more, all credits goes to codeworkx fir his fixes and works .
Installation Guide:
Copy my unofficial los to internal storage
Download my own TWRP and flash it via fastboot.
Download the partition.zip from linked thread. credits: @shivatejapeddi
Flash the whole partition.zip (don't panic if give the error it's ordinary administration.)
Go back to Wipe->uncheck all partition except the vendor, tap swipe to wipe it then.
Optional: you can go to Mount to see if mounted.
Wipe: dalvik, cache, data and system.
Now flash the whole rom that will install the vendor.img automatically, reboot device once finish installing then.
Enjoy Project Treble.
TWRP
Click here.
Credits:
LePro3 Developers.
LeMax2 Developers, without them wasn't possible for the unsed partition.
Sources:
https://github.com/hak86
XDA:DevDB Information
Treble x72x, ROM for the LeEco Le Pro3
Contributors
haky 86
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.18.x
ROM Firmware Required: EUI 20s or Newer
Based On: LineageOS
Version Information
Status: Testing
Stable Release Date: 2018-07-25
Beta Release Date: 2018-07-25
Created 2018-07-25
Last Updated 2018-07-24
** Note **
reservedddddddddddddddddddddddddddddddddddddddddddddddddddd
** Note **
Can I flash GSI by Phhusso:
I didn't try it yet, our device is ARM64 System A.
How to Flash GSI:
Download your favorite GSI rom.
Flash via TWRP or fastboot. BUT please keep attention to not wipe vendor or will not get booted, you are allowed to update vendor partition only if I release new build with fix things.
How Can I flash Android P Developer Preview 5:
Click on the following link.
Download ARM64 System A image. and 3 zips for post GSI.
Flash the system.img of Android via fastboot (recommend).
Reboot to TWRP.
Go to Mount-> check Vendor partition.
Flash the 3 zip as they arranged (1-2-3),
Reboot, enjoy Android P DP5.
NOTE:
This project has nothing to do with official updates, I did Project Treble by my initiative that will not affect with official roms. Might someone will reconsider supporting Treble even with official update tho?
Damn Congratulations!
I can't do it today. But, I will definitely try it this weekend. Thanks for sharing these test builds. I am definitely looking forward to checking it out!
Thanks again!
I will go ahead and download it and get started ASAP.
---------- Post added at 08:48 PM ---------- Previous post was at 08:41 PM ----------
haky 86 said:
Can I flash GSI by Phhusso:
I didn't try it yet, our device is ARM64 System A.
How to Flash GSI:
Download your favorite GSI rom.
Flash via TWRP or fastboot. BUT please keep attention to not wipe vendor or will not get booted, you are allowed to update vendor partition only if I release new build with fix things.
Click to expand...
Click to collapse
I just want to say again, that you are awesome for doing this, I didn't think it was possible with this phone. I am blown away! Nice job!
Hmmm can I shirk off my plans and install this right now? lol!
---------- Post added at 09:07 PM ---------- Previous post was at 08:49 PM ----------
I have a question about Gapps, Magisk and firmware.
I assume Firmware is not an issue since it would still get flashed to the correct partition. With Magisk, I assume that you would prefer that we use 16.7?
What should we use for Gapps? Do you have a specific Gapps in mind?
Wonderful Work~
Its a great! Wonderful work, now wait to fix all bugs now.
I have a doubt. Is the known bug caused by the PT partition? If flash Android P, will those bug still exist?
what should i say , it is great job !!!!!
haky 86 said:
reservedddddddddddddddddddddddddddddddddddddddddddddddddddd
Click to expand...
Click to collapse
Hi bro all fixes are completely done ,just use my trees here ,github.com/chityanj , recommend not to make changes to common tree, use as it is, where as for zl1 try make changes as per my x2 tree, yeah cam requires a blob edit in vendor, I can help u that
Any info about IR support and NFC Smartcard Service?
Most hyped project for now, congratulation. Peoples don't even woke up and already you haven't 2 pages of comments and 15 likes. Congratulation! If everything will be good I'll buy you a beer
Crystal-L said:
I have a doubt. Is the known bug caused by the PT partition? If flash Android P, will those bug still exist?
Click to expand...
Click to collapse
let me fix all those bugs and I can port the rom you want then.
shivatejapeddi said:
Hi bro all fixes are completely done ,just use my trees here ,github.com/chityanj , recommend not to make changes to common tree, use as it is, where as for zl1 try make changes as per my x2 tree, yeah cam requires a blob edit in vendor, I can help u that
Click to expand...
Click to collapse
congrats for fixes, hmm I will give a look right now. :good:
edit: what about the error in domain.te in system/sepolicy? I had to remove coredomain to let compiling go.
qqzwc said:
Any info about IR support and NFC Smartcard Service?
Click to expand...
Click to collapse
NFC already fixed just check "Works"
D1stRU3T0R said:
Most hyped project for now, congratulation.... If everything will be good I'll buy you a beer
Click to expand...
Click to collapse
O...M...G....! I see the bricking season has begun, already in summer?
Role reversal: if it (Oreo) [almost] works ......f**k with it!:good:
Good luck!
xen2001 said:
O...M...G....! I see the bricking season has begun, already in summer?
Role reversal: if it (Oreo) [almost] works ......f**k with it!:good:
Good luck!
Click to expand...
Click to collapse
) hopefully will work on x722, bcs always there is the problem.
haky 86 said:
let me fix all those bugs and I can port the rom you want then.
congrats for fixes, hmm I will give a look right now. :good:
edit: what about the error in domain.te in system/sepolicy? I had to remove coredomain to let compiling go.
NFC already fixed just check "Works"
Click to expand...
Click to collapse
Can you answer the question about Gapps?
Is a version of Gapps available for this yet?
haky 86 said:
let me fix all those bugs and I can port the rom you want then.
congrats for fixes, hmm I will give a look right now. :good:
edit: what about the error in domain.te in system/sepolicy? I had to remove coredomain to let compiling go.
NFC already fixed just check "Works"
Click to expand...
Click to collapse
hi be on permissve for now some sepolicy need to be rewritten and nuke that causes compliation issues
shivatejapeddi said:
hi be on permissve for now some sepolicy need to be rewritten and nuke that causes compliation issues
Click to expand...
Click to collapse
alright, I also forget to edit the mk files like Android.mk in the proprietary blobs probably that's why buggy.. I'll post new screenshots once got fixed :angel:
Damn, I sell my device.
Thank you for your support.
lazye53 said:
Damn, I sell my device.
Thank you for your support.
Click to expand...
Click to collapse
too late <3
well let's give this a go on x722 and see what happens .. Thanks for the hard work, it's highly appreciated !
Update 20180806:
There are many device-related bugs as we can see.
Different hardwares/softwares will cause different bugs on different devices, and there's probably no way to fix all of them just by modifying this port, but by porting it to devices respectively.
Anyone feel free to do it on your device and distribute your patches and ports based on this one.
Look into the P semi-GSI and system/vendor images from other P preview to get some idea.
WARNING:I‘m not responsible for any consequences at all.This is an OEM rom ported from Vivo X21 so it may cause wrong behaviors including partition overwritting and may brick your phone or break hardwares.I strongly recommend you take a completely full backup of your device and know how to recovery firmwares in case of any problems.
This is still in early stage and should be normal if some features are broken.
Only working on Qualcomm fully-Trebled deivces.[/B]
Known Bugs:
Keymaster not fully working on some platforms.(Lockscreen password may broken)
Features likely broken:
Advanced settings,fingerprint,SMS sending,ime
Almost Working in all deivces:
Boot
VoLTE
WLAN
BT
...
Install for A-only:
1.enable Treble ,flash a fully-trebled 8.1 rom
2.Extract FuntouchOS_P_port.7z to your TWRP backup folder (/.../TWRP/BACKUPS/$(yourserialnumber)/
3.Restore Funtouch OS /system with TWRP
4.flash patch zip
5.wipe data,flash fbe_disabler and Permissiver (from semiGSI thread) if needed for your device.
6.Reboot.
Normally it will boot to bootanimation.If it doessn't pass bootanim then take logs with
adb logcat > logcat.txt via PC.
NOTE: If you're stuck at logo , please make sure you can boot sGSI
Telegram Group:
https://t.me/funtouchosp
Credits:
Special thanks to @erfanoabdi
Vivo for ROM
Xiaomi for device
ChangeLog:
v3(20180729):IME Keyboard fixed.
Keymaster improved.
v2(20180727)ebloated /system to 2.8g
Major fixes about UI and vivo system services.
v1(20180727): Initial release.
Download
GDrive: https://drive.google.com/drive/folders/14RLFFu3mHDCdtOIzvH0IEDjZRZ_iZK_K?usp=sharing
BaiduNetdisk: https://pan.baidu.com/s/1KyzS0k_464BQSqOhQBjOQw pass: 8s5w
Older version:
v1:
ROM
https://drive.google.com/file/d/1WfcsihieEbFoypWxqW1K5DC-TOEFKDuk/view?usp=sharing
Patch
https://drive.google.com/file/d/1U58Cb42K0RgxoV9RXSC2boYqke6yPgm6/view?usp=sharing
ROM link is not working.
Hyapatia said:
ROM link is not working.
Click to expand...
Click to collapse
Me too
Download link updated!
fxsheep said:
Download link updated!
Click to expand...
Click to collapse
Ok I will try it,nice job:good:
SADLY MY SYSTEM 2.9GB
Redmi Note 4x
Lol which phone has more than 3Gb for system? Android only uses 1.x gb...
Hyapatia said:
Lol which phone has more than 3Gb for system? Android only uses 1.x gb...
Click to expand...
Click to collapse
My Xiaomi MI 6 ...
Okay...I'll release a debloated one later,need at least 3gb /system
fxsheep said:
My Xiaomi MI 6 ...
Click to expand...
Click to collapse
Yeah an exception cuz almost every device has 2.8-9-3gb system partition.
so big?
omarilzz said:
SADLY MY SYSTEM 2.9GB
Redmi Note 4x
Click to expand...
Click to collapse
me too:crying:
Hyapatia said:
Lol which phone has more than 3Gb for system? Android only uses 1.x gb...
Click to expand...
Click to collapse
My LG V30 with 6.x GB before i took 512MB off for a vendor partition xD
AB ???
……
system 3.4g and my device is huawei……
Sent from my Honor V9 using XDA Labs
SGCMarkus said:
My LG V30 with 6.x GB before i took 512MB off for a vendor partition xD
Click to expand...
Click to collapse
Have tested lol
Damn, that shows how ridiculously bloated some of OEM Roms are...
(my 5t has 2.9gb system, and it's rather clean out of the box)
NOT working on devices with /system smaller than 3.7G.
Slim-down Brother! so, everyone can use, remove all app which is available in playstore.
Thanks
where is selinux_disabler??
onism said:
where is selinux_disabler??
Click to expand...
Click to collapse
Permissiver.zip from semi-GSI thread