Greetings I have the Question mark when loading in two of the HP Touchpad tablet of 16 and 32, had them with androit 8.1,
I need an updated tutorial with the steps one by one and the download file, please help live in Venezuela and it is impossible to buy another equipment
HP touchpad with white interrogative symbol when loading, I need a tutorial and the files step by step to find the solution
HP touch pad falla
HP with white symbol of interrogative when loading
larrywilson said:
HP with white symbol of interrogative when loading
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?t=2072606
Related
Hi,
Am looking for a good rom (jellybean pref) for ICOO D70 PRO 7'' Tablet PC Dual Core Rockchip RK3066 8GB 1.6GHz Android 4.0
It's a Chinese tablet.. what do you recommend?
Thanks,
Pizu
need more info. What is your ROM now? I just got my D70proII 2 days ago, it is running 4.1.1 ROM 20121220. Did you check the official icoo site, http://soft.aoicoo.com/soft/list.asp?classid=1?
bun
icoo d70 pro 2 getting stuck in bootscreen
I am a noob in this forum.Looking for helpful answers but am yet to find one
I got coo d70 pro2 tablet . The problem is that the tablet won't move past the boot screen (It is stuck there).
I tried to flash rom using LiveSuit but it didn't work out (it says image file invalid)
Any suggestions ?
You download the upgrade package from the official website, inside there is upgrade instructions, choose English to change to english, They recommend to use RKBatchtool to flash upgrade, I am NOT familiar with using livesuite for rk3066 chips. Maybe some othre guru can jump in.
Hope this helps,
bun
bunanson said:
You download the upgrade package from the official website, inside there is upgrade instructions, choose English to change to english, They recommend to use RKBatchtool to flash upgrade, I am NOT familiar with using livesuite for rk3066 chips. Maybe some othre guru can jump in.
Hope this helps,
bun
Click to expand...
Click to collapse
Finally got the tab working.The tablet was entering into recovery mode but to flash it you need it to get into flash mode (Press Volume+ nad power button for sometime and your screen will go blank.However RKBatchtool will show a green dot on "Connected Devices"). Then just the image file downloaded from official site and you are good to go.Also check drivers (you need to install them while in recovery mode)
arnab_sarkar_1988 said:
Finally got the tab working.The tablet was entering into recovery mode but to flash it you need it to get into flash mode (Press Volume+ nad power button for sometime and your screen will go blank.However RKBatchtool will show a green dot on "Connected Devices"). Then just the image file downloaded from official site and you are good to go.Also check drivers (you need to install them while in recovery mode)
Click to expand...
Click to collapse
Glad to see u got it fixed. enjoy,
bun
I've got ICOO D70PRO II and after a couple of minutes using it the screen went full white and wont come normal... The system is working as when i press on screen I am recieveing feedback but the only problem is I cant see the image.. Any help? Already tried reflasning and checking flat cables but none helped..:crying:
Hello,
I mess up my tablet with a factory resset and now i can't boot in normal way. The tablet is open and appear a light on the screen and that is. I tried a multiples roms but only one who boot and show a image is from this tablet : http://www.denver-electronics.com/denver-tac-97042/ . Only problem is : tablet boot but not loadind the sistem(is blocking in android logo). The tablet i think is this one : http://www.amazon.it/i-INN-Display-Pollici-Capacitivo-Android/dp/B008EHBJQA. For what i know have 1 GB RAM and Allwienner CHIP A 10(single core).
Do you have a rom for this tablet or a similar one?? Please help me because my little one can't use usual games !!
pls.
bogdan109 said:
pls.
Click to expand...
Click to collapse
Only firmware who work is this ragonTouch_MID970IPS_4.0.4 ,but i have problem wit the touchscreen. I touch for exemple upper and open lower. I thank is a inverted touch.
I need help.
Sent from my SM-G901F using Tapatalk 2
I heave the sametablet. Somehow it stop working. Stuck on android logo. I tried to restore it with uberoid. Now it not turning on at all. If i connect it to comp i hear the sound and in device manager i see some drivers from MT65xx. Anyway, i know its possible to repair but i can't figure how. A little help? Tablet> i-INN Communicator 10' 3G. Thank you.
I have a QDYS MIRA that as I was watching a film in the middle it went black the screen and I have not got it working since then I have factory reset screen is only getting to kit Kat 4.4 had a go with Windows 10 and rockchip but the PC says the best drivers are loaded the same with Adb this is the first time for me to do this at 62 years old new to computers can some one help God bless you
This box was constantly freezing. Read somewhere that it requires a new firmware. The firmware that was on the box when I got it was 20181229. Tried to install a new firmware TANIX TX3 MAX & MINI "DUAL OS EDITION from usb stick using the method according to Tanix-box.com website " UPDATE FROM TF/USB MEMORY" . The software was loading fairly slowly so I stepped away for a moment and when I returned I had a blank screen on TV. Rebooted the box but only received the boot display and a black screen. realized I had bricked the box, Tried to download the same software using the usb burning tool but no go. I then tried the firmware TANIX TX3 MINI 20171220 using the usb burning tool. It downloads for about 7 seconds and then stops with an error. Obviously the wrong file. Here are the pics of my card. Sure hope someone can help me out. If I have to short a pin can you give me some details as I am pretty new at this. I do now have the original firmware and have looked everywhere, but can't find it. Thanks for any help on this issue, I've been reading and looking for a solution foe quit some time now.
Latest development, using USB Burning tool I loaded TX3Mini-20181210.img with no errors. I connected to TV and the T3 Mini logo cam on and the the android logo came on and was booting for just over 1 minute and then stopped and the display on the box was 0001.
billyfreeman said:
This box was constantly freezing. Read somewhere that it requires a new firmware. The firmware that was on the box when I got it was 20181229. Tried to install a new firmware TANIX TX3 MAX & MINI "DUAL OS EDITION from usb stick using the method according to Tanix-box.com website " UPDATE FROM TF/USB MEMORY" . The software was loading fairly slowly so I stepped away for a moment and when I returned I had a blank screen on TV. Rebooted the box but only received the boot display and a black screen. realized I had bricked the box, Tried to download the same software using the usb burning tool but no go. I then tried the firmware TANIX TX3 MINI 20171220 using the usb burning tool. It downloads for about 7 seconds and then stops with an error. Obviously the wrong file. Here are the pics of my card. Sure hope someone can help me out. If I have to short a pin can you give me some details as I am pretty new at this. I do now have the original firmware and have looked everywhere, but can't find it. Thanks for any help on this issue, I've been reading and looking for a solution foe quit some time now.
Latest development, using USB Burning tool I loaded TX3Mini-20181210.img with no errors. I connected to TV and the T3 Mini logo cam on and the the android logo came on and was booting for just over 1 minute and then stopped and the display on the box was 0001.
Click to expand...
Click to collapse
I installed TX3 mini 20181210.img on the box nd it worked. But the box is still freexing. Anyone else having this issue?
billyfreeman said:
I installed TX3 mini 20181210.img on the box nd it worked. But the box is still freexing. Anyone else having this issue?
Click to expand...
Click to collapse
Yo could try my custom Android TV 9 ROM, there are tx3 versions available, may work for you but no guarantees,
aidanmacgregor said:
Yo could try my custom Android TV 9 ROM, there are tx3 versions available, may work for you but no guarantees,
Click to expand...
Click to collapse
No doesn't work. Keep getting getinitial error
Help Required - android TV box is dead after flashing wrong
MEcool KII Pro s905d 2gb version Purchase in 2020
By mistake or lack of knowledge, I have flashed wrong rom, from then it is not booting on, only blue light is there, no desplay on screen, when powered on.
After that flashed different stock rom .img files from PC using USB, by pin shorting method.
USB tool shows flash is successful, but still there is no desplay, only blue light
Please suggest what can be done to get it working....
see attachment for more detail....