If I write the message in the wrong place, I'm sorry and I'd be happy to guide.
I have a tablet silver line sl1068 (mt8127)
At first the screen appeared on the logo of Silver Line - and stuck, I tried to install a new boot using the on-site tutorials and since the device does not work.
* Hard boot can not be performed due to lack of volume keys (there is only shut down button + back)
* The battery can not be disassembled
I dont know what to do =[
Pls help..
Related
please can someone tell me where i am going rong i'v had some problems this morning at 2am im still up trying to sort it,it crashed on me so did a hard rest after finding out how to hard rest manualy,now because iv done something rong i trying to flash and put a NEW rom on,im stuck with the SCREEN saying
Niki100
SP-1.16.hard
CplD-4 and in the right corner its says RUUNBH or something
i cant seem to get back to my NORMAL ROM
bootloader mode
try to put your device in the bootloader mode and flash it again.
steps for going to teh bootloader mode (taken from the Wiki):
* Remove back cover.
* Hold camera and power buttons.
* Press reset with your stylus (little button to the right of USB port).
good luck.
iv done that and it keeps coming back to the same screen
tommie&morris said:
try to put your device in the bootloader mode and flash it again.
steps for going to teh bootloader mode (taken from the Wiki):
* Remove back cover.
* Hold camera and power buttons.
* Press reset with your stylus (little button to the right of USB port).
good luck.
Click to expand...
Click to collapse
I have the same problem.
Hello, and thanks for viewing my post.
To cut a long story short and make it easy for you to read and reply, ill sum up my problem.
-Unofficial Chinese tablet
-Rooted, No custom kernels / anything else and no clockwork etc. .
- Tried to install drivers for a tweaking app, tablet shut off as soon as i clicked install.
- Tablet stuck on its boot logo.
-Holding down buttons lead to a dead android with an exclamation mark on top.
-Somehow got my self to recovery options by holding power + clicking the volume down once while the dead android is showing.
-Factory resetted
- Still stuck on logo
- Can't go into download mode = Dead android with exc. mark / Home button non existant.
-Terribly Frustrated
Please, i spent 5 hours searching for a solution for this mess, i cannot find the answer anywhere , Do not hesitate to reply if you have any sort of knowledge of this situation.
Thank you alot.
A collegue thought it would be interesting to see what the wipe data command on Exchange would do to my phone.
It appears to have bricked it.
The phone boots, shows the THL logo for a few seconds then shows a dark grey screen.
Is this phone recoverable.
I am a complete noob, first post, so if it is recoverable I'm going to need real step by step basic instructions.
Hope there is somebody who can help.
Thanks.
ChrisGrahamUK said:
A collegue thought it would be interesting to see what the wipe data command on Exchange would do to my phone.
It appears to have bricked it.
The phone boots, shows the THL logo for a few seconds then shows a dark grey screen.
Is this phone recoverable.
I am a complete noob, first post, so if it is recoverable I'm going to need real step by step basic instructions.
Hope there is somebody who can help.
Thanks.
Click to expand...
Click to collapse
I got this result too...only grey screen after ThL logo. Can't get into neither recovery mode nor dowlnload mode. Please help
It happened to me too, exactly the same steps and now it is the same thing: logo and after that a black screen. Please, any solution? My wife is gonna kill me (it is her phone):silly:
A hard reset could save your life..
Press and hold the volume (-) button and then press the power button for about 3 seconds, release the volume (-) button when the screen comes and wait for repair menu. It's written in Chinese. Go to the part which is writing MMC at the end with the volume (-) button and press the power button. You are now in the hard reset menu, press the power button again and wait until the phone opens. That's all. You will lose all your programs which you installed before if you didn't back up before but the phone will work. I saved my W200S yesterday with same solution.
Thanks for your advice. I noticed the Chinese menu but I avoided it every time being afraid of not ruining something . Anyway, these days I've found out how to flash new ROMs so I am fooling around with trying different ROMs, I got allowance from my wife for this ). I am trying to fix an issue of the stock ROM, the proximity sensor doesn't light up the display when taking away from ear. The phone was not rooted so any attempt to enter engineering mode failed. Yesterday I discovered a MIUI ROM which looks very stylish and it solved the proximity sensor and even added the notification LED option (this was not included in the stock ROM). Now I have to test the battery life.
motanbigcat said:
A hard reset could save your life..
Press and hold the volume (-) button and then press the power button for about 3 seconds, release the volume (-) button when the screen comes and wait for repair menu. It's written in Chinese. Go to the part which is writing MMC at the end with the volume (-) button and press the power button. You are now in the hard reset menu, press the power button again and wait until the phone opens. That's all. You will lose all your programs which you installed before if you didn't back up before but the phone will work. I saved my W200S yesterday with same solution.
Click to expand...
Click to collapse
I have the same problem with a black screen, the buttons do not work nothing happens Please help
THLW200S - Cyanogenmod 11
Hi, I solved all the issues of my THLW200S (lack of notification LED and improperly functioning of the proximity sensor) by flashing this ROM. I tried a few other ROM's but this one works flawlessly.
kasperski86 said:
I have the same problem with a black screen, the buttons do not work nothing happens Please help
Click to expand...
Click to collapse
Hi, I had the same problem with my W200S, did you solved in any way?
Can you help me?
Thanks
fagh3r said:
Hi, I had the same problem with my W200S, did you solved in any way?
Can you help me?
Thanks
Click to expand...
Click to collapse
Hi i had the same problem a grey screen no recovery mode and i fix it when flashing a new rom.
I use flash tools and i choose (format +download) tab.
I have this same problem, but i can't even get into the safe mode, the chinese one. it just boots up at the thl logo but still only dark grey screen. please help since i tried everything else
Typical me, bad luck bryan, wanted to put bliss pop on my ZU, when i did "wipe for new rom" and then realised i forgot to put the rom on my phone.
Now its stuck on sony logo,
Wont go into recovery (and everyone says the this button mix or that one or that one, none works)
- so whats the real FFFF buttons i need for recovery?
And the red kill button is abit broken too, so please give me a quick fix.
When plug the usb in and touch volume up blue LED is on. down is green LED for super short time.
Please tell me how to get it in recovery mode so i can flash Bliss Pop
thank you. :good:
EDIT: It was soft bricked,
what i did, find the flashtool, (all links were broken so it took a while) get the drivers, find a firmware, flash it with the tool, and voila. :highfive:
Okay, so you got it working again, but just a little tip for next time. Pressing and holding VOL UP plus POWER for a few seconds is the same as pushing the red button. You'll feel three quick vibrations which indicates that your device is completely off.
I have Lenovo TAB S8-50F that is currently stuck in a boot loop. It shows the white Lenovo and "android" text on black background boot screen for 30 to 60 seconds, then shuts off, vibrates and the screen flickers some white color and then goes back into the Lenovo and "android" text boot screen and repeats.
After some investigation on these forums and Google, I have tried the following:
Hold down Power + Volume Up + Volume Down until I see "fastboot starting...". I wait 5 - 10 minutes and it still says "fastboot starting...", nothing else. I try to connect to my Windows 8 laptop but it doesn't recognize the device.
Hold down Power + Volume Down until I see the boot screen, then let go of Power (keeping Volume Down pressed). Apparently this should boot into a Recovery menu, but nothing happens and it continues to just turn off after about a minute and boot loop
Hold down Power + Volume Up until I see the boot screen, then let go of Power (keeping Volume Up pressed). Same result as above, it still goes into boot loop.
During any of the 3 scenarios above, I can turn off the tablet by holding Power + Volume Up. Also I never saw any other messages like "EFI failed" or "No mounted drive" that other users had problems with.
Is there anyone out there that can help me restore this tablet back to functional state? I'm not sure what happened that caused this to happen.
bump
bump
bump
Your question has been answered on my thread
drop a like on all my past comments to encourage me to help you.
TAP ON THE BOX BELOW TO CONTINUE
x.ak**** said:
like all my comments above to encourage me to help you.
Okay so first of all i will let you know why a phone gets bricked-
>corrupted rom
>some system files got deleted
>rooting
>modding
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
my case
i always keep two phones with me like one for my experiments and one as a backup. In this case i'll be talking about my lyf wind 3 that got bricked.
>actually i was trying to install twrp onto that phone but first i had to root it, and due to the upgraded android security, i wasn't able to do via kingoroot so i tried i-root and it did the job but instead of kingo-superuser i got some ****ty superuser so i tried granting permission to the actual superuser and while doing so i accidentally double rooted my phone (first with i-root and then with kingoroot), which was kinda stupid, so it just deleted some system files and my phone wouldn't boot after that. It just got stuck on the boot logo.
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Click to expand...
Click to collapse