Hi I really need some help unbricking my phone.
I have a doogee Mini F1 Turbo which was rooted. Today I did an OTA update (bad idea).
During the update the word ERROR appeared on the screen. When the phone rebooted it was stuck on the white boot logo screen.
I've downloaded the SP Flash tool and rom from the doogee website
When I try and re-flash I get the Message "Error initializing scatter file failed. Please check the name of scatter file you load is legal"
Hopefully some body can point me in the right direction and help me get my phone working again.
Thanks for your time,
Gavin
Hi Gavin,
I'd you get a solution to this? I'm facing the same issue.
Denclan
Soultion
Hi Denclan,
Sorry about the delay inb replying.
Yes I found a solution to my reflashing problem. What I had to do was move the contents of the ROM Download into to same folder as the Flashing program. This then worked.
I would be carefull with the R07 update.
After reflashing my phone I updated it before rooting. Then rooted it. Everything seemed fine but the battery drain was shocking so I've flashed it back to R05 and that works a treat.
Hope this helps you out.
Gavin
denclan said:
Hi Gavin,
I'd you get a solution to this? I'm facing the same issue.
Denclan
Click to expand...
Click to collapse
Hello All!
I have a problem with one of my tablet.
I bought it on Irulu's website,Expro X1 plus.
After a couple of mounth I had to send it back for change it to a new one.
Got it and want to change the firmware again( 4.4 ),but I got an error message in Phoenixsuit: Download boot1 failed.
I found another firmware ( 5.1 ) and tried to flash and worked,the tablet started but no SD card and camera
So my first tablet was the same like the second inside and outside too.Checked the mainboard.
Tried different cables,programs,computers ....
What am I do wrong?
Thanks
recently bought a htc one m8s second hand. everything works 100% but one problem. when i try to system update to android 6 it fails. the bootloader appears telling me that the update was aborted because of some stuff i dont understand.. any help would be appreciated. cheers guys also apologies if this is wrong section to put thread. i didnt know XD
Hello guys,
this is my first post here!
I recently got Idol 2 from my brother to use and seeing as it says on GSM arena that it has KitKat I wanted to flash it to get rid of slow 4.2.2.
I used SP flashtool and on youtube I found how and also the ROM. I flashed it, first I used format all except bootloader and after flashing it wont switch on.
PC can see it and I tried every guide, I have 6 roms, many of them russian and every time I try flashing I get
brom error sft enable dram failed 4032. I somehow solved that but not I get brom error s_ft_enable_dram_fail (0xfc0) every time I try flashing.
I have a boat load of drives, I used USBDEVIEW to uninstall them and I have reinstalled them 47 times, always same error. Flashing wont start.
What am I doing wrong? IS there anyone who knows? :crying:
I really wanna fix it because I dont have a phone anymore..... I had to sell my OnePlus 3 cause of money issues and cannot afford a new one.....
Thanks in advance!
Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
flagpol said:
Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
Click to expand...
Click to collapse
Do you find the solution yet? Cause I face the same problem too..
Tzul please help.. :crying:
me too, please help
similar issue, cant power on, keep on vibrate loop interval, no display, not detected by pc
flagpol said:
Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
Click to expand...
Click to collapse
Hi, did you find anything?
I have three TB3-710l (they are the company I work for), I have successfully root 2 of them but the newest tablet doesn't have the same luck.
First I install TWRP by Tzul, but the TWRP have an error never mount anything.
Second I try to flash stock firmware (Lenovo_Tab_3_TB3-710I_MT6580_S000032_160921) then the same happened, never turn on and just vibrates.
Always using SPFT, and now I have the same problem has you: always shows that it cannot load DRAM (4032 error or 0xFC0 error).
EDIT: Hi, for everyone who get in here with this problem, please read all this thread.
I unbrick my tablet with this answer in specific.
Good Luck!
asdrubalsantander said:
Hi, did you find anything?
I have three TB3-710l (they are the company I work for), I have successfully root 2 of them but the newest tablet doesn't have the same luck.
First I install TWRP by Tzul, but the TWRP have an error never mount anything.
Second I try to flash stock firmware (Lenovo_Tab_3_TB3-710I_MT6580_S000032_160921) then the same happened, never turn on and just vibrates.
Always using SPFT, and now I have the same problem has you: always shows that it cannot load DRAM (4032 error or 0xFC0 error).
EDIT: Hi, for everyone who get in here with this problem, please read all this thread.
I unbrick my tablet with this answer in specific.
Good Luck!
Click to expand...
Click to collapse
THis might WOrk i ve havent tried yet ,tho i wanna flash it now
https://forum.xda-developers.com/android/development/tb3-710i-tb3-710f-rom-stock-rom-lenovo-t3437810
same problem faced,can any developer please help us