Related
HUAWEI MediaPad T3 10 LTE/4G
AGS-L09
FIRMWARE:
SERVICE FIRMWARE
http://combinefile.com
https://easy-firmware.com/home/browse/category/id/25975
ROOT
(1) See here ????
(2) TWRP AGS-W09 can be used to root (Magisk v14.0) but don't think backup\restore works. Or HERE (uploaded by a Russian dude for me as I can't create a login for the forum).
ENABLING PHONE CALLS: NO SOLUTION YET.
Phone calls are disabled on Vodafone (text works). No Dialer and it does not work with 3rd party or google dialers.
OEMINFO
NONE SHARED - May be it's different with Qualcomm processor - see https://forum.xda-developers.com/showpost.php?p=78744756&postcount=163 ?
HUAWEI MediaPad T3 8" LTE/4G
KOB-L09
OFFICIAL FIRMWARE: NONE YET
OTHERS:
combinefile FREE
easy-firmware - PAID - Never Used them
ROOT
TWRP
To get Backups working Download ASSAYYED_KITCHEN and follow instruction here. I would assume it would be the same for AGS-L09. And hopefully someone can share the OEMINFO backup (as far as I know, no information unique to your device are shared like IMEI, etc).
ENABLING PHONE CALLS: NO SOLUTION YET.
Phone calls are disabled on EE UK firmware KOB-L09C238B002 (text works). No Dialer and it does not work with 3rd party or google dialers. Confirmed to be working on O2 UK (KOB-L09C105B003).
Quick info for 1st timers
Before rooting, you need to unlock bootloader for any Huawei / Honor devices.
Once you got the code Download\Install Minimal ADB and Fastboot
Now connect your Huawei device to the PC with a USB cable. (Give it required permission)
Boot your Huawei device into bootloader mode using the following command:
Code:
adb reboot bootloader
Once your device is in bootloader mode, issue the following command to unlock bootloader:
Code:
fastboot oem unlock your-unlock-password
Use the Vollume Up/Down key to select yes and power key to confirm - bootloader is unlocked now and phone will reset.
TOOLS
Huawei Update Extractor - to unpack and extract the contents of the UPDATE.APP that contain image's firmware.
AGS-L09 - Huawei MediaPad T3 10
Returned the HUAWEI MediaPad 8" T3 4G (Model KOB-L09, Android 7/) tablet now but gone crazy and bought a Brand New T3 10" from ebay (AGS-L09, Firmware AGS-L09C127B031 CUSTC127D002). This is on Vodafone UK Network but same issues as EE - no dialer. srsroot says it can be rooted but bit risky as I have never used that tool before, especially when I am unable to find any non Chinese FULL firmware yet. Any one tried this tool before?
I have a feeling that all the UK network remove the dialer (most likely using the same firmware) - wondering which firmware (English) supports phone calls (review on notebookcheck.net says its actually quite good). I guess oeminfo is needed to flash a different regional firmware?
Man I'm in the same boat as you're I need to root my Huawei AGS-L09 but no avail hope some day we can find a way to do it with the help of the xda genius members!
By the way I can make phone calls on mine
Thanks Mercer99, as per other thread, appreciate it (for your device security, can you remove the image as this has your IMEI)- we have the same model, but different firmware.
AGS-L09C199B002 is “Saudi Arabia Oman Kenya Cameroon Jordan Qatar Ghana Android 7.0 EMUI 5.1” region.
AGS-L09C127B031 is “Greece Hungary United Kingdom Nonspecific Android 7.0_EMUI” . The dialer/calling function is disabled on this firmware - confirmed on Vodafone and EE network.
Is there any way you can extract the OEMINFO from your device and share it with us. This should enable me to debrand the phone if I can find your firmware (downloaded EUROPEAN version with Firmware finder already – so really need an European OEMINFO).
My phone is still locked to Vodafone so I am not sure whether I can flash the firmware or even need root to flash a different OEMINFO (bootloader is unlocked already).
Rooted
Took a risk and its rooted now - Magisk v14.0 installed fine and seems to be working (need to test further). Also, Vodafone unlocked the device now for me
Challenge now is to debrand so as to enable functions which has been disabled by Vodafone (namely calling).
Would appreciate if anyone can help - need OEMINFO from another region so as to change the firmware, especially European one or even other UK network who does not disable calling.
Could not contain myself…. In my quest to debrand so I can have a dialer/phone calling function, downloaded a firmware (either from FF Team or on the internet), tried flashing system.img file to see if it installs the dialer as it would not install extracted ones and it did not work. So tested with the boot.img and it did work but phone kept rebooting to eRecovery.
Restoring from TWRP (incomplete/untested) backup did not work. Can’t install any other regional firmware because of OEMINFO. eRecovery can’t find any firmware. The only thing – TWRP/Stock Recovery, eRecovery or bootloader!
Chatted with Huawei support and they won’t give me a link to download the firmware – want me to send for repair, which I don’t really want to – too much hassle and they may end up blaming me anyway….lol He agreed to upload one to their website if he can find one.
I would appreciate if anyone can give me an OEMINFO or link to EUROPEAN firmware with a dialer….. I think European one is AGS-L09C127B031CUSTC127D002 – would appreciate if anyone can share the file with me.
Managed to source the Vodafone UK now firmware now - thanks to combinefile.com
The only think remaining is to enable the enable the dialer now – can someone help? Either a guide to enable within Vodafone firmware or share an OEMINFO and detail of a UK/European firmware that has a dialer enabled (i.e. can make calls) would be much appreciated.
ROOT
(1) See here ????
(2) TWRP AGS-W09 can be used to root (Magisk v14.0) but don't think backup\restore works.
Click to expand...
Click to collapse
did someone used the first method ("How to install Magisk with ADB") and root the tablet with success?
do i have to unlock my bootloader on huawei site even with that root procedure?
is there a working TWRP for this model?
i have a AGS-L09C100B011, it's an european firmware for sure
if you found it useful let me know what to do
501st said:
did someone used the first method ("How to install Magisk with ADB") and root the tablet with success?
do i have to unlock my bootloader on huawei site even with that root procedure?
is there a working TWRP for this model?
i have a AGS-L09C100B011, it's an european firmware for sure
if you found it useful let me know what to do
Click to expand...
Click to collapse
I am not sure if anyone has tried but check the 4pda.ru forum (I have been using google translation) lol
It should work with a locked bootloader.
TWRP - I have updated the link now to 4pda.ru forum. I have used that to root my model. I don't think restore (and backups) works. Of course, you need blootloader to be unlocked first.
Does your AGS-L09C100B011CUSTC100D002 have a dialer and can you make calls? I need the firmware and may be OEMINFO /Cust - not exactly sure how it works on a tablet. But it certainly needs something else to be changed.
buddimanv said:
Does your AGS-L09C100B011CUSTC100D002 have a dialer and can you make calls? I need the firmware and may be OEMINFO /Cust - not exactly sure how it works on a tablet. But it certainly needs something else to be changed.
Click to expand...
Click to collapse
yes i have a dialer.
in the dealer if i type *#*#2846579#*#* it goes in the ProjectMenu -> 3. Network Information Query -> 2. SIM Lock Info -> it says simlock_deactive
I will not do anything to my device by now. i will wait for a complete guide without any risk since i'm a noob.
Tutorial please..
Please show me the tutorial to root my Mediapad T3 8.0 KOB-L09...
OneMoment Studios said:
Please show me the tutorial to root my Mediapad T3 8.0 KOB-L09...
Click to expand...
Click to collapse
KOB-L09 TWRP Here - I should be getting a new KOB-L09 to play end of this week,
In case this info is useful to anyone, I just got one of these from O2 and the dialler is preinstalled on the device. I've not tried using a regular SIM to make calls from it but the feature doesn't seem to be blocked. I can open the dialler and see the keypad etc.
Not a bad little tablet this, it needs an update to the latest security patches as it's still on July and the default launcher is crap (easy to install Nova of course) but otherwise very good for the price having Android 7.0, a Snapdragon, and LTE for £100. Stuck a MicroSD in there and filled it with movies to watch on the go.
Hexgor, can you confirm the firmware version and are you able to upload the dialer apk files for us, may be it just needs to be installed....thanks
Thanks
Thanks, now my KOB L09 is rooted with Magisk in Twrp..
OneMoment Studios said:
Thanks, now my KOB L09 is rooted with Magisk in Twrp..
Click to expand...
Click to collapse
Cool, I managed to root it as well now - my firmware has no dialer (EE UK KOB-L09C238B002). Do you have a dilaer on your phone? If yes, can you share the firmware info (also, OEMINFO if possible), thanks
501st said:
yes i have a dialer.
in the dealer if i type *#*#2846579#*#* it goes in the ProjectMenu -> 3. Network Information Query -> 2. SIM Lock Info -> it says simlock_deactive
I will not do anything to my device by now. i will wait for a complete guide without any risk since i'm a noob.
Click to expand...
Click to collapse
Updated main post - you need to dial *#*#1357946#*#* to get Product ID and Serial number.
Custom ROM
Can you please give or port any Custom Rom with Nougat or Oreo for my Huawei MediaPad T3 8.0 (KOB-L09)
OneMoment Studios said:
Can you please give or port any Custom Rom with Nougat or Oreo for my Huawei MediaPad T3 8.0 (KOB-L09)
Click to expand...
Click to collapse
I think we are long way to go on this dude, lol....can you confirm if you have a dialer and your firmware version please.
If you have a dialer, can you backup (see main post) and would appreciate if you could share OEMINFO please - as far as I know, no information unique to your device are shared like IMEI, etc. thanks
I have a dialler..
buddimanv said:
I think we are long way to go on this dude, lol....can you confirm if you have a dialer and your firmware version please.
If you have a dialer, can you backup (see main post) and would appreciate if you could share OEMINFO please - as far as I know, no information unique to your device are shared like IMEI, etc. thanks
Click to expand...
Click to collapse
I have a dialler and I am currently on Android 7.0 (EMUI 5.1)..Will you say what is OEM info?Do you mean build number....it is KOB-L09C199B003...
This is the official FunkyHuawei support thread.
FunkyHuawei is a (mostly) paid service which allows you to do the following:
1. Install the latest system software, even before it's released by OTA.
2. Install beta/prerelease system software, without needing to be a beta tester.
3. Recover a bricked phone.
4. Rebranding / Change the region of your phone (China -> Europe, for example, to get Google and so on.)
5. Root your EMUI 8 phone, even with stock recovery (This feature is free)
Except for rooting, all of these features are supported even if you cannot unlock your phone's bootloader.
To find FunkyHuawei, please Google it. Or you can find a link to the service as well as our rebranding tool within the following XDA Portal article.
https://www.xda-developers.com/exclu...-pro-firmware/
We are pleased to announce FHUnbrickFlashTool -- You can now repair any recent Huawei phone via fastboot, even if you cannot access eRecovery or boot the phone! Even if it doesn't show the Huawei logo, as long as you can get a fastboot connection to your computer, you can recover the phone! Google FHUnbrickFlashTool or check FunkyHuawei's reddit for details.
In cooperation with XDA, FunkyHuawei is offering a free credit to Recognized Developers and Recognized Contributers on XDA.
Please PM me for more details.
We will continue posting in this thread with updates regarding new software versions and releases regarding this device.
We will also be monitoring it so we can help anyone who has issues.
For device-specific information, please see the next post.
Honor V10 Information:
Rebranding (7 credits): You can rebrand the Honor V10 to and from the Chinese, Asian, and European versions.
We have released a special rebranding tool just for the Honor V10. You can find the link from the rebranding section of our website, or on our reddit. This new procedure avoids any issues with the device, and everything works after testing. We have tested rebranding Chinese to Asia and Europe brandings. Please use this FHRebrandToolBKLEdition, not FHRebrandTool, as this device has some differences from other devices we needed to address.
To rebrand to Chinese:
Use FHRebrandToolBKLEdition and choose BKL-AL20 for the model, and all/cn for the branding. Then use eRecovery method to install firmware from BKL-AL00 or BKL-AL20 section of our site, twice.
To change the phone to European, choose BKL-L09 and hw/eu branding in the tool. Then use eRecovery method to install the latest firmware from the BKL-L09C432 section of our site, twice.
To change the phone to Asia, choose BKL-L09 and hw/spcseas branding in the tool. Then use eRecovery method to install the latest firmware from the BKL-L09C636 section of our site, twice.
In most cases, you'll need to install the new firmware in eRecovery twice.
Unbricking (7 Credits): Contact FunkyHuawei support for help unbricking. You can use FHUnbrickFlashTool (google for FunkyHuawei Unbrick Flash Tool and check the page on our reddit.) You may also be able to use the eRecovery method if you can get into eRecovery.
Frequently Asked Questions
Q: How much does FunkyHuawei cost?
A: You need to buy credits on the FunkyHuawei website. The price per credit varies depending on the number of credits you buy. Different operations cost different amounts of credits. However, the Root feature of the Mate 10 tool is free, and as mentioned above, Recognized Developers/Contributors of XDA can ask for a free credit.
Q: My phone is bootloader locked, and FRP locked. My bootloader unlock code dosen't work. It won't boot. eRecovery doesn't work. Can you help?
A: Yes. With the Mate 10 this is now a common situation. Contact FunkyHuawei for help in this situation. We'll need to access your computer remotely and the procedure is a little bit complicated, but the phone can be unbricked.
Q: I can't get my bootloader unlock code/don't want to unlock my bootloader, but I want to change my phone to something other than Chinese. Can you help?
A: Yes. Our new FunkyHuawei Rebrand Tool works on ALL recent Huawei phones, to rebrand them to another region even when the bootloader is locked.
Q: I'm not seeing the latest version listed on FunkyHuawei or elsewhere as an OTA. Why not?
A: Huawei has a very odd and unpredictable way of rolling out OTA updates. You can use FunkyHuawei to install the new version immediately, or can wait for the update to be rolled out. It might be a month or more after release until the update reaches your device from Huawei directly. We have no idea why.
Q: Why isn't FunkyHuawei free?
A: Because many of FunkyHuawei's features cost FunkyHuawei money to provide. Features that don't cost FunkyHuawei money to provide, like rooting the Mate 10 or our TWRP build for Mate 9/Oreo, for example, are generally made available for free. There are also bills to pay, kids to put through school, and so on.
Q: I noticed FunkyHuawei in an XDA Portal article!
A: FunkyHuawei loves XDA, and is cooperating with them as much as possible. Recognized Developers and Contributors on the XDA forums are welcome to claim a free credit from FunkyHuawei as well.
Q: I have a different question.
A: This is what this thread is for! Post away!
Will the Honor View 10 like the Mate 10 pro show "relocked" if the bootloader was once unlocked before?
Dito13 said:
Will the Honor View 10 like the Mate 10 pro show "relocked" if the bootloader was once unlocked before?
Click to expand...
Click to collapse
Yes, if you unlock it with the code.
If you use FHRebrandTool it will never show relocked, but only locked.
How to unroot and lock bootloader Honor View 10
duraaraa said:
Yes, if you unlock it with the code.
If you use FHRebrandTool it will never show relocked, but only locked.
Click to expand...
Click to collapse
Dear Team,
had used your tool for Root and unlocking my bootloader in Honor View 10, now i wish to unroot and lock the bootloader as rooting made many features blocked.
kindly help how to do this.
I'm trying to root my bkl-L09 but when I downloaded the program I don't see an option to root just to backup my phone.
removed *
Hi @duraaraa,
I'm on Huawei Honor V10 BKL-AL20 8.0.0.132(C00). A bit confused. Will this "Mate10" Root/Rebrand tool and Rebrand (without unlocking bl) tool also work with Honor V10? What re-brand/firmware do you recommend for my phone if I mostly reside in Asia?
piphol said:
Hi @duraaraa,
I'm on Huawei Honor V10 BKL-AL20 8.0.0.132(C00). A bit confused. Will this "Mate10" Root/Rebrand tool and Rebrand (without unlocking bl) tool also work with Honor V10? What re-brand/firmware do you recommend for my phone if I mostly reside in Asia?
Click to expand...
Click to collapse
No. You need to use FHRebrandTool to rebrand the Honor V10.
Please google for honor v10 rebranding guide and check the result from the FunkyHuawei reddit for instructions.
The only version you can rebrand to right now is the European one, so that's what I'd suggest.
surdu_petru said:
Please OP ... remove this sentence from OP, because it's not true :
I already send you a PM, and as I can see , there is nothing free for RC
Click to expand...
Click to collapse
I checked the PM, and you didn't ask for a free credit, or tell me the FH account you use. You just asked a generic support question, so it was not clear what you were asking for.
Let me know your email address from your funkyhuawei account by PM, and I can give you the credit, since you are a recognized contributor. However if you are on Andorid O with an Honor 9 as your message says, we'd need to have an Android O build for your phone/branding for it to work for you. Maybe you can let me know what branding your phone is (fastboot getvar vendorcountry)
Still looking for an answer on how to root my bkl-l09. I only see options to back up things when I download the tool
Sent from my BKL-L09 using Tapatalk
1+
And i read, that some features doenst work after the V10 was root. Information about root V10 very poor.
No ways to root honor view 10
big_axe said:
No ways to root honor view 10
Click to expand...
Click to collapse
But there's already a root method.
So what are the steps to root the View 10? Which tool do we need to use? I have the bkl-L09
Eagle1337 said:
But there's already a root method.
Click to expand...
Click to collapse
Absolutely I don't want to rebrand my view 10, so what is this method? With the mentioned tool there are no way to root. I think that this thread is only a spam to make advertising and to get money.
There is a way to root Honor V10. From another thread, I read unlocking bootloader then flashing a modified boot img can do the trick. But when I read the Mate 10 thread about rooting, they've lost Theme customization, Android pay (deal breaker) and front camera bokeh effect (another deal breaker for selfie addicts? ). I wonder if Honor V10 has the same restrictions when rooted. Oh by the way, freezing/uninstalling some pre-installed apps when rooted can easily brick the phone. So I advise everyone not to freeze apps. That's why FH strongly discourages doing it. Other than that, we're good... ? ?
OP i tried to update my firmware from B120 to B130, i tried twice and it failed. Reason update pakaged could not be verified. My 2 creddits down the drain.
Is there something am not doing right?
peepee999 said:
OP i tried to update my firmware from B120 to B130, i tried twice and it failed. Reason update pakaged could not be verified. My 2 creddits down the drain.
Is there something am not doing right?
Click to expand...
Click to collapse
You can email our support if you have such issues. Please try using eRecovery not HiSuite.
I see Huawei isn't providing unlock codes anymore, so I've been researching options before purchasing this phone. Having a rooted, unlocked phone with TWRP is rather important, imho.
It looks like this person successfully used DC Unlocker for ~$4: https://forum.xda-developers.com/showpost.php?p=78665569&postcount=392
However, other people say "Funky Huawei" is the only working one, which is much more expensive: https://forum.xda-developers.com/showpost.php?p=78627440&postcount=6
I then see this post about firmware versions needed for DC unlocker to work, but for the Mate 10 "Pro" -- unsure if that also applies to the Mate 10: https://forum.xda-developers.com/mate-10/how-to/finally-unlock-bootloader-mate-10-pro-t3850111
Buying from here: https://www.ebay.com/itm/Huawei-Mat...vHzekWP7zx0GEhBHmmrA:rk:1:pf:1&frcectupt=true
... I'm unsure what firmware I'd get & I don't know how much that would matter. I'm hoping someone could help clarify: does DC Unlocker currently work on this phone, and how much trouble is it...?
Thank you!
phr00t said:
I see Huawei isn't providing unlock codes anymore, so I've been researching options before purchasing this phone. Having a rooted, unlocked phone with TWRP is rather important, imho.
It looks like this person successfully used DC Unlocker for ~$4: https://forum.xda-developers.com/showpost.php?p=78665569&postcount=392
However, other people say "Funky Huawei" is the only working one, which is much more expensive: https://forum.xda-developers.com/showpost.php?p=78627440&postcount=6
I then see this post about firmware versions needed for DC unlocker to work, but for the Mate 10 "Pro" -- unsure if that also applies to the Mate 10: https://forum.xda-developers.com/mate-10/how-to/finally-unlock-bootloader-mate-10-pro-t3850111
Buying from here: https://www.ebay.com/itm/Huawei-Mat...vHzekWP7zx0GEhBHmmrA:rk:1:pf:1&frcectupt=true
... I'm unsure what firmware I'd get & I don't know how much that would matter. I'm hoping someone could help clarify: does DC Unlocker currently work on this phone, and how much trouble is it...?
Thank you!
Click to expand...
Click to collapse
Got mine now....from the HUC.......for just 4 EUR.......
I was on BLA-AL00 8.1.0.326 (C00)
Addymore said:
Got mine now....from the HUC.......for just 4 EUR.......
I was on BLA-AL00 8.1.0.326 (C00)
Click to expand...
Click to collapse
HUC? What & where is that? BLA-AL00 which is the "pro" -- so that may not reflect my experience with a non-pro, correct?
phr00t said:
HUC? What & where is that? BLA-AL00 which is the "pro" -- so that may not reflect my experience with a non-pro, correct?
Click to expand...
Click to collapse
BLA is the pro....
HUC is the one recommend in the guide u mentioned... Just a DC Unlock alternative from same developers...!
For what I read... It is about the firmware youare on... Mine is old... I think if ur security level is beyond June 2018...u can be less fortunate with the HUC... But it is just 4 EUR.... If u really want to unlock.... Try it....
Only way right now is:
HCU by dc-unlocker. This will not work on firmware after June 2018 (check security patch).
Ministry of solution, this service might come back, it's currently down and cost $30....
FunkyHuawei, expensive as hell.
You can also void your warranty by opening your device up and flash board software with testpoint. This would allow you to use HCU while on board software. This is not recommended at all if you don't know what you're doing.
Edit: Hopefully your firmware is not updated. DO not update when you get it.
ante0 said:
Only way right now is:
HCU by dc-unlocker. This will not work on firmware after June 2018 (check security patch).
Ministry of solution, this service might come back, it's currently down and cost $30....
FunkyHuawei, expensive as hell.
You can also void your warranty by opening your device up and flash board software with testpoint. This would allow you to use HCU while on board software. This is not recommended at all if you don't know what you're doing.
Edit: Hopefully your firmware is not updated. DO not update when you get it.
Click to expand...
Click to collapse
It is a refurb, so warranty is likely already run out. May you point me to instructions to flashing board software with testpoint, just in case?
ante0 said:
Only way right now is:
HCU by dc-unlocker. This will not work on firmware after June 2018 (check security patch).
Ministry of solution, this service might come back, it's currently down and cost $30....
FunkyHuawei, expensive as hell.
You can also void your warranty by opening your device up and flash board software with testpoint. This would allow you to use HCU while on board software. This is not recommended at all if you don't know what you're doing.
Edit: Hopefully your firmware is not updated. DO not update when you get it.
Click to expand...
Click to collapse
Got my phone. This is the information:
Huawei Honor View 10
Model # BKL-L04 8.1.0.120(C567)
Firmeware System 8.1.0.60(01FD)
EMUI Version 8.0.0
Android Version 8.1.0
Android Security Patch July 1st, 2018
Hoping this can still get a bootloader unlock code...
phr00t said:
Got my phone. This is the information:
Huawei Honor View 10
Model # BKL-L04 8.1.0.120(C567)
Firmeware System 8.1.0.60(01FD)
EMUI Version 8.0.0
Android Version 8.1.0
Android Security Patch July 1st, 2018
Hoping this can still get a bootloader unlock code...
Click to expand...
Click to collapse
It's using old bootloader so chances are high, at least
You usually get a refund from DC anyway.
I just hope it doesn't complain about Security Patch date without even trying.
ante0 said:
It's using old bootloader so chances are high, at least
You usually get a refund from DC anyway.
I just hope it doesn't complain about Security Patch date without even trying.
Click to expand...
Click to collapse
This guy:
https://ministryofsolutions.com/huawei-bootloader-unlock-paid-service-html
... said only 8.1.0.110C567 & 8.1.0.111(C567) is "supported" for his method, and not mine (8.1.0.120(C567))
After giving my information to global-unlocking-solutions.miiduu.com, they said "Yes, order and wait for updates to finish", which I presume is related to their "WE ARE TESTING THE HUAWEI BOOTLOADER CODES NOW: AFTER TEST RESULTS ORDERS WILL BE PROCEED" message on their website:
https://global-unlocking-solutions.miiduu.com/bootloader-unlock-codes-choose-model-below
I also presume this is the same thing that has FunkyHuawei (still) down.
I did try doing the "read bootloader code" from DC unlocker (without buying any credits yet), just to see what would happen, and got this message:
Reading bootloader code...
unknown error (375)
I assume if it was due to not having an account, it would say invalid username or not enough credits.... so I'm worried this means DC Unlocker won't work.
So, I'm kinda stuck, I guess? I don't want to use the phone, since I will have to either reset it when getting a bootloader unlocked, or "give up" on getting a bootloader code and update to EMUI 9.
Hoping for any advice...
I had 8.0.0.129 on my usa mate 10 pro with December security patch purchased 4 credits from DC logged in and was able to get my bl unlock code.
DC Unlocker support came back saying "your error means that current version of android in your device has new security patch and is not supported yet."
So, looks like I'm already past the point of no return (aka no "easy" bootloader unlock code). My best chance at getting a bootloader unlock code is via IMEI methods like FunkyHuawei if they return, which firmware & security patch version don't seem to matter. My phone apparently is covered under a warranty, which I don't want to invalidate (which unlocking your bootloader does). So, even if I got an unlock code, I'd likely not use it for awhile. Considering all of that, and the desire to start using my phone... I upgraded the firmware planning to get EMUI 9 Pie (which I'm clearly not going to get via custom ROMs anytime soon). If FunkyHuawei or the cheaper "global unlock" options return, I'll consider trying them out... :-/
phr00t said:
DC Unlocker support came back saying "your error means that current version of android in your device has new security patch and is not supported yet."
So, looks like I'm already past the point of no return (aka no "easy" bootloader unlock code). My best chance at getting a bootloader unlock code is via IMEI methods like FunkyHuawei if they return, which firmware & security patch version don't seem to matter. My phone apparently is covered under a warranty, which I don't want to invalidate (which unlocking your bootloader does). So, even if I got an unlock code, I'd likely not use it for awhile. Considering all of that, and the desire to start using my phone... I upgraded the firmware planning to get EMUI 9 Pie (which I'm clearly not going to get via custom ROMs anytime soon). If FunkyHuawei or the cheaper "global unlock" options return, I'll consider trying them out... :-/
Click to expand...
Click to collapse
As i stated i had .129 update on my mate 10 pro A09 and i paid $4 and it read my code and gave it to me and i was able to unlock and flashed .121 pie update with bta flashy tool. I have unlocked bl once before in may 18bi believe and relocked it back when i took ota and not sure if it had anything to do with it.
lingarajug said:
As i stated i had .129 update on my mate 10 pro A09 and i paid $4 and it read my code and gave it to me and i was able to unlock and flashed .121 pie update with bta flashy tool. I have unlocked bl once before in may 18bi believe and relocked it back when i took ota and not sure if it had anything to do with it.
Click to expand...
Click to collapse
You had 8.0.0.129, while I had 8.1.0.120. There are more numbers than just the last 3.
I tried DC Unlocker, and it gave me an error that everyone on the forum said means your Android version is unsupported. DC Unlocker's support said the same thing.
I'm glad you got yourself a bootloader unlock code. I wish I could have... maybe if the IMEI method opens up again (which I doubt), I'll get one someday...
phr00t said:
You had 8.0.0.129, while I had 8.1.0.120. There are more numbers than just the last 3.
I tried DC Unlocker, and it gave me an error that everyone on the forum said means your Android version is unsupported. DC Unlocker's support said the same thing.
I'm glad you got yourself a bootloader unlock code. I wish I could have... maybe if the IMEI method opens up again (which I doubt), I'll get one someday...
Click to expand...
Click to collapse
You don't have the usa variant I believe as .129 was the latest update.
lingarajug said:
You don't have the usa variant I believe as .129 was the latest update.
Click to expand...
Click to collapse
I realized yesterday, for some reason, I'm in the Mate 10 forum when I have a Honor View 10. That is why our firmware numbers don't seem to make sense
ante0 said:
Only way right now is:
HCU by dc-unlocker. This will not work on firmware after June 2018 (check security patch).
Ministry of solution, this service might come back, it's currently down and cost $30....
FunkyHuawei, expensive as hell.
.
Click to expand...
Click to collapse
Hi @ante0 / all
I note from https://ministryofsolutions.com/huawei-bootloader-unlock-paid-service-html that they want $4 (not $30)
BUT
They are also stating that "Mate 10, Mate 10 Pro, P20 Lite, Huawei P Smart (These models only supported if have older firmware version)"
I am stuck with two new-ish Mate 10 Pro phones that fail with DC tools. See https://forum.xda-developers.com/showthread.php?p=78901016#post78901016
I'm guessing my phone has new-er firmware and that's why DC tools failing
Any suggestions?
henrysinn said:
Hi @ante0 / all
I note from https://ministryofsolutions.com/huawei-bootloader-unlock-paid-service-html that they want $4 (not $30)
BUT
They are also stating that "Mate 10, Mate 10 Pro, P20 Lite, Huawei P Smart (These models only supported if have older firmware version)"
I am stuck with two new-ish Mate 10 Pro phones that fail with DC tools. See https://forum.xda-developers.com/showthread.php?p=78901016#post78901016
I'm guessing my phone has new-er firmware and that's why DC tools failing
Any suggestions?
Click to expand...
Click to collapse
That's only for old phones/old firmware. New unlock was here: https://ministryofsolutions.com/huawei-bootloader-unlock-service-all-new-models-new-firmwares
But it's closed. It seems to be closed for everyone now so no go.
DC will only work on phones with firmware on May 2018 or earlier (In most cases. Some custs do work on June/July but that only seem to be the case with carrier custs)
So you're out of luck...
Hi Everyone,
I've recently bought a Oppo Reno 3 Pro 5G dual SIM from China and I would like to unlock the bootloader to flash an oversea version firmware (with GMS framework). I have enabled the Developer option and OEM Unlocking function and I am having difficulty to get into Fastboot mode. With the phone powered off, I press the volume down button + power button and it only boots into recovery mode. Can someone please point me to the right direction? I also need some help of finding the right firmware for this model and flashing tool. I found this firmware Oppo_Reno 3_Pro_5G_PCRM00_11_A.02_191215.ofp online and not sure if that would be the right one.
Thanks,
Joe
jone886 said:
Hi Everyone,
I've recently bought a Oppo Reno 3 Pro 5G dual SIM from China and I would like to unlock the bootloader to flash an oversea version firmware (with GMS framework). I have enabled the Developer option and OEM Unlocking function and I am having difficulty to get into Fastboot mode. With the phone powered off, I press the volume down button + power button and it only boots into recovery mode. Can someone please point me to the right direction? I also need some help of finding the right firmware for this model and flashing tool. I found this firmware Oppo_Reno 3_Pro_5G_PCRM00_11_A.02_191215.ofp online and not sure if that would be the right one.
Thanks,
Joe
Click to expand...
Click to collapse
to enter fastboot mode you have to push volume button up and power, not volume down on this phone or you enter in adb shell on your PC the command "adb reboot fastboot"
BUT: I think, there are a lot of hints still not known by us users to unlock this oppo phone. We might like on Xiaomi phones need an oppo Account to unlock.
I myself didn't try to unlock yet. Does only make sense when a working TWRP is out
There was a note in the OPPO RENO forum about getting and running a file from OPPO, after 60 days.
For me the Chinese version is not good anymore, now I can't install any new app on this phone because it says that I have to log in to a heytap account. But if I want to log in, I have to give my Chinese phone number.. I don't have Chinese phone number of course. Any solutions to this problem?
Now the find x2 neo (cph2009eu) released as the global version, and I want to install it's software because it's 100% the same hardware if I know it well. But I can't. I have the firmware for it from the internet, but in a .ofp file, I can't flash it
Okay, now I found a method to install apps without signing in with a chinese number, so the global software is not urgent anymore, but it would be good anyway.
I tried to install the global software via qfil, but it gives sahara error. After a quick search I found that we have to unlock the phone's bootloader to flash the global rom.
But the chinese version that I have does not have fastboot mode, so maybe we have to wait until Oppo will unlock the phone's bootloader officially (probably we have to wait until the next Android/ColorOS beta)
I have bought this EU Version, but funny thing here: they disabled 5G. Mine has 765G, 12GB RAM, dual SIM but neither specified nor selectable 5G
Hi all,
I also own the Chinese version of this phone (PCRM00)
Looking to unlock the bootloader, install EU version of the ROM and also root..
Any help?
Thanks!
Hi,
the Oppo registration ist now available with a none-chinese mobile number. Seems they splittet the HeyTap and Oppo services so you can use an least the Oppo services.
Here is the software update of the global version
https://oppo-uk.custhelp.com/app/software_update_detail/p_name/Find+X2+Neo
It gives an error, so suddenly we cant install it simply from the original recovery
My variant is just the 128/8gb version, and maybe this also could be a problem, becouse the global phone has only 256/12 variant. So maybe with a 256/12 varint its woth a try
XDAnonymus said:
Here is the software update of the global version
https://oppo-uk.custhelp.com/app/software_update_detail/p_name/Find+X2+Neo
It gives an error, so suddenly we cant install it simply from the original recovery
My variant is just the 128/8gb version, and maybe this also could be a problem, becouse the global phone has only 256/12 variant. So maybe with a 256/12 varint its woth a try
Click to expand...
Click to collapse
I have 12/256 EU Version (seems to sell in Poland), dual-SIM, 4G only (although SD765G).
Current Firmware reads CHP2009_11_A.08, March security update.
Is this a valid update or will it possibly bring 5G?
Preacher_at said:
I have 12/256 EU Version (seems to sell in Poland), dual-SIM, 4G only (although SD765G).
Current Firmware reads CHP2009_11_A.08, March security update.
Is this a valid update or will it possibly bring 5G?
Click to expand...
Click to collapse
If you have the single-camerahole, 765G version, and the phone is CHP2009, this update maybe woth a try. The problem could be that Oppo dont allow to change the firmware in the official recovery, only update is possible, so if I try to install the global (CHP2009EU) on my PCRM00 (chinese) variant, it fails and dont install anything. And we dont have custom recoverys yet, and the chinese version dont even have fastboot mode to unlock the bootloader, so it seems impossible for me to install the global until Oppo dont unlock our phones bootloaders officially (for example for a beta upadate)
But if you already have CHP2009 software, maybe the update that I linked worth a try. If the recovery allows it..
If I know it well, the CHP2009EU (Oppo find X2 neo) have 5g modem, just like the chinese variant that I have (Theyre the same phone, but the software is different. I want the global software instead of the chinese becouse of Netflix HDR and Google assistant)
It is the single camera hole but 5G disabled- See Spec
I'd show you, but I cannot share screenshots here.
Would it reject update if it was not functional version or would I brick the device, if I flashed incorrect version?
The difference I see ist that X2 neo has single SIM and Reno3 pro has dual. I know from other brands, that this can brick the phone.
Preacher_at said:
It is the single camera hole but 5G disabled- See Spec
I'd show you, but I cannot share screenshots here.
Would it reject update if it was not functional version or would I brick the device, if I flashed incorrect version?
The difference I see ist that X2 neo has single SIM and Reno3 pro has dual. I know from other brands, that this can brick the phone.
Click to expand...
Click to collapse
There's always a theoretical chance to brick your device when you modify the software, it's your responsibility. But I think there's more chance that the original recovery that we have won't allow you to update your software to the X2 neo's software. If you want 5g, you can try the Chinese variant's software, but I think the recovery won't allow the other softwares to install
XDAnonymus said:
There's always a theoretical chance to brick your device when you modify the software, it's your responsibility.
Click to expand...
Click to collapse
I have it now for three weeks, no need for 5G, so better have a working than bricked phone currently.
Probably I'd play around in one year, when tools are more stable.
In fact I considered to search for an update on Polish Oppo site and found an update file for my Reno3 Pro, that was exactly the same as from your link and X2 neo.
So I did the update via Recovery, it ran through and landed with version .28.
It did not change anything on supported bands.
I remember from Sony phones, that bands are defined in NVRAM.
It seems that for all Reno3/X2 variants with 765G the firmware is the same, it is distinguished only by supported bands.
Preacher_at said:
In fact I considered to search for an update on Polish Oppo site and found an update file for my Reno3 Pro, that was exactly the same as from your link and X2 neo.
So I did the update via Recovery, it ran through and landed with version .28.
It did not change anything on supported bands.
I remember from Sony phones, that bands are defined in NVRAM.
It seems that for all Reno3/X2 variants with 765G the firmware is the same, it is distinguished only by supported bands.
Click to expand...
Click to collapse
Can you send the link from this update? So we can install this on PCRM00 via recovery?
XDAnonymus said:
Can you send the link from this update? So we can install this on PCRM00 via recovery?
Click to expand...
Click to collapse
I just updated from Polish site to latest version:
https://oppo-pl.custhelp.com/app/software_update_detail/p_name/Reno3+Pro
Now I am on June 5th security level.
The former file from UK site is exactly the same:
https://oppo-uk.custhelp.com/app/software_update_detail/p_name/Find+X2+Neo
Just tried the polish version on the chinese variant of the phone and it gave me an error.
Falsy157 said:
Just tried the polish version on the chinese variant of the phone and it gave me an error.
Click to expand...
Click to collapse
I also tried it, dont work :/
I don't know if it's really helpful but i think I've read somewhere on the official website that 5g isn't unlocked yet and would be thru future updates.
I live in the Netherlands and my Reno pro 5g should arrive today.
I'm kind of lost by all the different variants though..
The find x neo is also for sale over here and it seems the same service expert a minor different front cam.
But here in the Netherlands they are both for sale but the neo is much more expensive.
Anyway, I'm excited as this will be my first Oppo.
Hi,
I bought 1 year ago the Media Pad M5 Pro unbranded from eBay.
I never received any update till now Still on Android 8.0.0 ( Build Nr CMR-AL19 8.0.0.199 (C431)
Huawei Support told me multiple times there is no update available for my device.
But I think they are wrong.
I think it just got the wrong Cust (C431 is made for "providers" but mine has no brand but this firmware)
C432 receives all the updates from Huawei.
So my question is how I can change my Cust from C431 to C432 or directly flash a C432 firmware?
I hope someone can help me in easy steps I think I am not the only one on the whole internet with this problem but in non-forum a solution.
Thanks
4r44444 said:
Hi,
I bought 1 year ago the Media Pad M5 Pro unbranded from eBay.
I never received any update till now Still on Android 8.0.0 ( Build Nr CMR-AL19 8.0.0.199 (C431)
Huawei Support told me multiple times there is no update available for my device.
But I think they are wrong.
I think it just got the wrong Cust (C431 is made for "providers" but mine has no brand but this firmware)
C432 receives all the updates from Huawei.
So my question is how I can change my Cust from C431 to C432 or directly flash a C432 firmware?
I hope someone can help me in easy steps I think I am not the only one on the whole internet with this problem but in non-forum a solution.
Thanks
Click to expand...
Click to collapse
changing to c432 (which is the m5 wifi version, with Kirin 960s not Kirin 960) is quit risky - bootloop
but u could go for the testpoint method and flash treble gsi android 10, need to open bootloader
https://forum.xda-developers.com/mediapad-m5/how-to/downgrade-unbrick-huawei-device-methods-t3915693
its a bit easier with HCU client and dc phoenix( u need the dc unlocker anyway -to unlock bootloader - unfortunatly no other way) but HCU is 20 bucks time license for 3 days
if you really want the the super easy way there is a guy doing it for 30 bucks but u need to give him access to your windows pc(i wouldnt do that) https://ministryofsolutions.com/paid-services
if u find an easier way pls tell me, i gave an cmr-w09 (m5 wifi) and its running super smooth on havoc os(custom android 10)