Solved: dont install B138patch01 and magisk | Mate 10 stuck "Your device..."
Hello,
I've just updated to .138 on a Mate 10 C636
Then i've root it with HWOTA8_Mate10 magisk
But when the phone tried to boot it get stuck on the screen "Your device is booting now...."
- I've go into eRecovery to shutdown the phone and go to fastboot via vol- and plug cable
- Then remove magisk
- The phone boot back
Cool
Related
hello guys,
i have a problem with my huawei mate 10 lite and i need your help please. there is no operating system on my phone and i cant install one.
device:
RNE-L21C432
aktually:
- bootloader is unlocked (phone unlocked + FRP locked)
- twrp is installed
- adb modus only works in twrp, but not at fastboot modus (it shows me no attached device)
i tried:
- Huawei eRecovery -> failed after 5%
- recovery over hisuite -> no succes
i tried to flash an new os:
- flash a custom rom with twrp, it works, but at the end of the setup it brings me every time to the start of the setup
- installation of the stock rom with vol up + vol down + powerbutton (dload) -> no succes (software install failed!)
- create images with huawei rom extractor and flashing with twrp -> no succes
when i try to flash a stock rom, did i need a stock recovery for this?
i hope you can help me.
thanks
breaked
i am now on the sam problem about 1 week please need a solution if you have
med ouj said:
i am now on the sam problem about 1 week please need a solution if you have
Click to expand...
Click to collapse
Have you tried: https://forum.xda-developers.com/ma...development/hwota-huawei-mate10-lite-t3777115
Or https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
I would try HWOTA first.
Hi..
today i unlocked the bootloader installed twrp and then xposed.
After Installing Xposed and rebooting i got stuck in the boot screen.
then i tryed uninstall xposed -- but still stuck in the boot screen
after trying several things and googling i decieded to wipe all data.
Now no OS is on the phone and i can´t enter anymore in twrp! only fastboot show up.
What can i do now to install a OS ?
The XiaoMI Tool by Francesco Tescari says me i have to active USB debuggin
Phone: Xiaomi MI6
PLS Help me
Hello everybody.
I have a BLA-L29 C636 and I'm trying to flash BLA-L29C_8.0.0.115(C636) in DC Phoenix, but Phoenix still says after extracting the update.app:
Build number: :BLA-L29 8.0.0.131(C636)
Product model: BLA-L29
Device not supported
At the beginning it says:
Looking for a device in fastboot mode
Device found: MYSERIALNUMBER
Starting extracting partitions from file UPDATE.APP
Current version: BLA_Global_C999
I think the problem is that undefined version of BLA_Global_C999, so that Phoenix thinks I'm not on a BLA-L29 C636. Any ideas?
Edit: I came from Lineage OS to Stock Rom by HWOTA8_Mate10. After flashing was succesful I had a blackout and installed Magisk before changing OEM-Unlock in the developer-settings. -.- So my Mate 10 Pro stucked in a bootloop to eRecovery. Bootloader is locked (code is here) and FRP is also locked. So my only way is in my opinion DC Phoenix. But Phoenix still says "device not supported".
I fixed it on my own, but I really don't know what it was. Maybe someone has the same problem in the future, so I want to show my way of solving it.
I used DC Phoenix v56 (latest v57 didn't fixed it that way) in Advanced Mode and the function for flashing the update.app out of update_all_hw.zip. First I put my Mate 10 Pro in Upgrade Mode by holding VolUp + VolDown + Powerbutton. After Emui-Update-Screen was shown, I connect my Mate to the PC and pressed the Update-Button in DC Phoenix. Phoenix searched for phones in Upgrade-Mode, finally found it and flashed the correct update.app. After rebooting and a factory reset my Mate booted into the system and all was fine. Also since that, Phoenix recognize my Mate as a BLA-L29 C636 and not as a BLA_GLOBAL_C999.
Hey guys
Recently I updated my phone(huawei mate 9 pro, Lon-L29) to the latest android version 9 and after the update the phone rebooted twice and it didnt skip that, it stuck on the eRecovery screen with 4 options:
scan wifi and upgrade
wipe data/factory reset
reboot
shutdown
I tried the first option several times with no success, I've got "Getting package info failed"
I tried Vol+power to wipe cache and reboot with no results
I tried to update it again by connecting it to my pc and pressing on vol+ and vol- and power and it showed me the updating screen and it stuck on 5% for 3 min and rebooted again to the 4 options.
I tried dload method with external usb because there is no sd card in mate 9 pro, nothiiiing.
I tried Minimal ADB and Fastboot, Huawei FRP Tool, to unlock bootloader/ frp, nothing!
I tried DC_Phoenix_v69 and HCU client, HCU showed " device not found" , "its not support chipset" , I tried to update it by Phoenix and it showed that huawei didnt accept all the files in update .app, exACKAGE_TYPE
but when I put another update .app it accepted PACKAGE_TYPE in it but not the other parts and in each one it gave me that my phone security is not supported by Phoenix!
In one of the files(update .app) that I tried the phone screen turned off and didnt come back again, I tried to open HiSuite to recover the phone and it showed that it stuck on fastboot, I tried to exit from fastboot by Minimal ADB and Fastboot and Huawei FRP Tool with no results!
I tried to exit from fastboot by Minimal ADB and Fastboot and Huawei FRP Tool with no results! My phone is dead(black screen) now and I didnt backup my files,
I tried chimera but it showed an error "failed to read the file" and the phone is in fastboot!
My phone is dead now and I didnt backup my files, so sad
Any help?
Hello, my realme 3 pro is stuck in bootloop, I am able to go into fastboot, but unable to write anything using it.
How it happened:
I was installing magisk using the magisk app. I rebooted my phone from the magisk app and the phone got stuck on android screen.
What I have tried:
I used vol up + power button then volume down + power button to go into fastboot. On my PC using fastboot devices I can see my device but whenever I try to execute any command such as
fastboot flash recovery twrp.img
Click to expand...
Click to collapse
It says sending 'recovery' (32056 KB) but takes about a minute before saying FAILED (Write to device failed (no link)).
Can anyone please help me.
Thank You
im facing the same problm .
I fixed the issue be using adb on an older computer with usb 2.0 you can try the same
tell me the complete process
i ve deleted my realme vender and other data files in twrp now im stuck on bootloop of realme 3 pro...
but twrp recovery is loading..
how to fix that please help me
Sparta9000 said:
Hello, my realme 3 pro is stuck in bootloop, I am able to go into fastboot, but unable to write anything using it.
How it happened:
I was installing magisk using the magisk app. I rebooted my phone from the magisk app and the phone got stuck on android screen.
What I have tried:
I used vol up + power button then volume down + power button to go into fastboot. On my PC using fastboot devices I can see my device but whenever I try to execute any command such as
It says sending 'recovery' (32056 KB) but takes about a minute before saying FAILED (Write to device failed (no link)).
Can anyone please help me.
Thank You
Click to expand...
Click to collapse
You should have to install realme ui recovery and vander 3.5gb file from official. Than try official method for installation of twrp ozip supported recovery. And flash any rom and mjsik that you want. In case you accidently delete your vander?
Or
But may be your recovery file is corrupted ?
So I advise you to install twrp from official website .
That will be approx 60mb.